static int acpi_fujitsu_add(struct acpi_device *device)
{
int result = 0;
int state = 0;
ACPI_FUNCTION_TRACE("acpi_fujitsu_add");
if (!device)
return -EINVAL;
fujitsu->acpi_handle = device->handle;
sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME);
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
acpi_driver_data(device) = fujitsu;
result = acpi_bus_get_power(fujitsu->acpi_handle, &state);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Error reading power state\n"));
goto end;
}
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
end:
return result;
}
static int
acpi_fan_read_state (
char *page,
char **start,
off_t off,
int count,
int *eof,
void *data)
{
struct acpi_fan *fan = (struct acpi_fan *) data;
char *p = page;
int len = 0;
int state = 0;
ACPI_FUNCTION_TRACE("acpi_fan_read_state");
if (!fan || (off != 0))
goto end;
if (acpi_bus_get_power(fan->handle, &state))
goto end;
p += sprintf(p, "status: %s\n",
!state?"on":"off");
end:
len = (p - page);
if (len <= off+count) *eof = 1;
*start = page + off;
len -= off;
if (len>count) len = count;
if (len<0) len = 0;
return_VALUE(len);
}
static int acpi_fan_add(struct acpi_device *device)
{
int result = 0;
int state = 0;
struct thermal_cooling_device *cdev;
if (!device)
return -EINVAL;
strcpy(acpi_device_name(device), "Fan");
strcpy(acpi_device_class(device), ACPI_FAN_CLASS);
result = acpi_bus_get_power(device->handle, &state);
if (result) {
printk(KERN_ERR PREFIX "Reading power state\n");
goto end;
}
device->flags.force_power_state = 1;
acpi_bus_set_power(device->handle, state);
device->flags.force_power_state = 0;
cdev = thermal_cooling_device_register("Fan", device,
&fan_cooling_ops);
if (IS_ERR(cdev)) {
result = PTR_ERR(cdev);
goto end;
}
dev_dbg(&device->dev, "registered as cooling_device%d\n", cdev->id);
device->driver_data = cdev;
result = sysfs_create_link(&device->dev.kobj,
&cdev->device.kobj,
"thermal_cooling");
if (result)
dev_err(&device->dev, "Failed to create sysfs link "
"'thermal_cooling'\n");
result = sysfs_create_link(&cdev->device.kobj,
&device->dev.kobj,
"device");
if (result)
dev_err(&device->dev, "Failed to create sysfs link "
"'device'\n");
result = acpi_fan_add_fs(device);
if (result)
goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
end:
return result;
}
static int acpi_fan_read_state(struct seq_file *seq, void *offset)
{
struct acpi_device *device = seq->private;
int state = 0;
if (device) {
if (acpi_bus_get_power(device->handle, &state))
seq_printf(seq, "status: ERROR\n");
else
seq_printf(seq, "status: %s\n",
!state ? "on" : "off");
}
return 0;
}
static int fan_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
{
struct acpi_device *device = cdev->devdata;
int state;
int result;
if (!device)
return -EINVAL;
result = acpi_bus_get_power(device->handle, &state);
if (result)
return result;
return sprintf(buf, "%s\n", state == ACPI_STATE_D3 ? "0" :
(state == ACPI_STATE_D0 ? "1" : "unknown"));
}
static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
*state)
{
struct acpi_device *device = cdev->devdata;
int result;
int acpi_state;
if (!device)
return -EINVAL;
result = acpi_bus_get_power(device->handle, &acpi_state);
if (result)
return result;
*state = (acpi_state == ACPI_STATE_D3 ? 0 :
(acpi_state == ACPI_STATE_D0 ? 1 : -1));
return 0;
}
int
acpi_fan_add (
struct acpi_device *device)
{
int result = 0;
struct acpi_fan *fan = NULL;
int state = 0;
ACPI_FUNCTION_TRACE("acpi_fan_add");
if (!device)
return_VALUE(-EINVAL);
fan = kmalloc(sizeof(struct acpi_fan), GFP_KERNEL);
if (!fan)
return_VALUE(-ENOMEM);
memset(fan, 0, sizeof(struct acpi_fan));
fan->handle = device->handle;
sprintf(acpi_device_name(device), "%s", ACPI_FAN_DEVICE_NAME);
sprintf(acpi_device_class(device), "%s", ACPI_FAN_CLASS);
acpi_driver_data(device) = fan;
result = acpi_bus_get_power(fan->handle, &state);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Error reading power state\n"));
goto end;
}
result = acpi_fan_add_fs(device);
if (result)
goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state?"on":"off");
end:
if (result)
kfree(fan);
return_VALUE(result);
}
static int acpi_fan_resume(struct acpi_device *device)
{
int result = 0;
int power_state = 0;
if (!device)
return -EINVAL;
result = acpi_bus_get_power(device->handle, &power_state);
if (result) {
printk(KERN_ERR PREFIX
"Error reading fan power state\n");
return result;
}
device->flags.force_power_state = 1;
acpi_bus_set_power(device->handle, power_state);
device->flags.force_power_state = 0;
return result;
}
static int acpi_fan_resume(struct acpi_device *device)
{
int result = 0;
int power_state = 0;
if (!device)
return -EINVAL;
result = acpi_bus_get_power(device->handle, &power_state);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Error reading fan power state\n"));
return result;
}
device->flags.force_power_state = 1;
acpi_bus_set_power(device->handle, power_state);
device->flags.force_power_state = 0;
return result;
}
int acpi_bus_set_power(acpi_handle handle, int state)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_device *device = NULL;
char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
result = acpi_bus_get_device(handle, &device);
if (result)
return result;
if ((state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
return -EINVAL;
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n",
kobject_name(&device->dev.kobj)));
return -ENODEV;
}
/*
* Get device's current power state
*/
if (!acpi_power_nocheck) {
/*
* Maybe the incorrect power state is returned on the bogus
* bios, which is different with the real power state.
* For example: the bios returns D0 state and the real power
* state is D3. OS expects to set the device to D0 state. In
* such case if OS uses the power state returned by the BIOS,
* the device can't be transisted to the correct power state.
* So if the acpi_power_nocheck is set, it is unnecessary to
* get the power state by calling acpi_bus_get_power.
*/
acpi_bus_get_power(device->handle, &device->power.state);
}
if ((state == device->power.state) && !device->flags.force_power_state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
return 0;
}
if (!device->power.states[state].flags.valid) {
printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
return -ENODEV;
}
if (device->parent && (state < device->parent->power.state)) {
printk(KERN_WARNING PREFIX
"Cannot set device to a higher-powered"
" state than parent\n");
return -ENODEV;
}
/*
* Transition Power
* ----------------
* On transitions to a high-powered state we first apply power (via
* power resources) then evalute _PSx. Conversly for transitions to
* a lower-powered state.
*/
if (state < device->power.state) {
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
goto end;
}
if (device->power.states[state].flags.explicit_set) {
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
goto end;
}
}
} else {
if (device->power.states[state].flags.explicit_set) {
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
goto end;
}
}
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
goto end;
}
}
end:
if (result)
printk(KERN_WARNING PREFIX
"Transitioning device [%s] to D%d\n",
device->pnp.bus_id, state);
else {
device->power.state = state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
device->pnp.bus_id, state));
}
return result;
}
VOID
Bus_InitializePdo (
PDEVICE_OBJECT Pdo,
PFDO_DEVICE_DATA FdoData
)
{
PPDO_DEVICE_DATA pdoData;
int acpistate;
DEVICE_POWER_STATE ntState;
PAGED_CODE ();
pdoData = (PPDO_DEVICE_DATA) Pdo->DeviceExtension;
DPRINT("pdo 0x%p, extension 0x%p\n", Pdo, pdoData);
if (pdoData->AcpiHandle)
acpi_bus_get_power(pdoData->AcpiHandle, &acpistate);
else
acpistate = ACPI_STATE_D0;
switch(acpistate)
{
case ACPI_STATE_D0:
ntState = PowerDeviceD0;
break;
case ACPI_STATE_D1:
ntState = PowerDeviceD1;
break;
case ACPI_STATE_D2:
ntState = PowerDeviceD2;
break;
case ACPI_STATE_D3:
ntState = PowerDeviceD3;
break;
default:
DPRINT1("Unknown power state (%d) returned by acpi\n",acpistate);
ntState = PowerDeviceUnspecified;
break;
}
//
// Initialize the rest
//
pdoData->Common.IsFDO = FALSE;
pdoData->Common.Self = Pdo;
pdoData->ParentFdo = FdoData->Common.Self;
INITIALIZE_PNP_STATE(pdoData->Common);
pdoData->Common.DevicePowerState = ntState;
pdoData->Common.SystemPowerState = FdoData->Common.SystemPowerState;
ExAcquireFastMutex (&FdoData->Mutex);
InsertTailList(&FdoData->ListOfPDOs, &pdoData->Link);
FdoData->NumPDOs++;
ExReleaseFastMutex (&FdoData->Mutex);
// This should be the last step in initialization.
Pdo->Flags &= ~DO_DEVICE_INITIALIZING;
}
int acpi_bus_set_power(acpi_handle handle, int state)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_device *device = NULL;
char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
ACPI_FUNCTION_TRACE("acpi_bus_set_power");
result = acpi_bus_get_device(handle, &device);
if (result)
return_VALUE(result);
if ((state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
return_VALUE(-EINVAL);
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Device is not power manageable\n"));
return_VALUE(-ENODEV);
}
/*
* Get device's current power state if it's unknown
* This means device power state isn't initialized or previous setting failed
*/
if (device->power.state == ACPI_STATE_UNKNOWN)
acpi_bus_get_power(device->handle, &device->power.state);
if (state == device->power.state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
return_VALUE(0);
}
if (!device->power.states[state].flags.valid) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Device does not support D%d\n",
state));
return_VALUE(-ENODEV);
}
if (device->parent && (state < device->parent->power.state)) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Cannot set device to a higher-powered state than parent\n"));
return_VALUE(-ENODEV);
}
/*
* Transition Power
* ----------------
* On transitions to a high-powered state we first apply power (via
* power resources) then evalute _PSx. Conversly for transitions to
* a lower-powered state.
*/
if (state < device->power.state) {
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
goto end;
}
if (device->power.states[state].flags.explicit_set) {
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
goto end;
}
}
} else {
if (device->power.states[state].flags.explicit_set) {
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
goto end;
}
}
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
goto end;
}
}
end:
if (result)
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Error transitioning device [%s] to D%d\n",
device->pnp.bus_id, state));
else
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
device->pnp.bus_id, state));
return_VALUE(result);
}
int acpi_bus_set_power(acpi_handle handle, int state)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_device *device = NULL;
char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
result = acpi_bus_get_device(handle, &device);
if (result)
return result;
if ((state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
return -EINVAL;
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n",
kobject_name(&device->dev.kobj)));
return -ENODEV;
}
/*
* Get device's current power state
*/
acpi_bus_get_power(device->handle, &device->power.state);
if ((state == device->power.state) && !device->flags.force_power_state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
return 0;
}
if (!device->power.states[state].flags.valid) {
printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
return -ENODEV;
}
if (device->parent && (state < device->parent->power.state)) {
printk(KERN_WARNING PREFIX
"Cannot set device to a higher-powered"
" state than parent\n");
return -ENODEV;
}
/*
* Transition Power
* ----------------
* On transitions to a high-powered state we first apply power (via
* power resources) then evalute _PSx. Conversly for transitions to
* a lower-powered state.
*/
if (state < device->power.state) {
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
goto end;
}
if (device->power.states[state].flags.explicit_set) {
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
goto end;
}
}
} else {
if (device->power.states[state].flags.explicit_set) {
status = acpi_evaluate_object(device->handle,
object_name, NULL, NULL);
if (ACPI_FAILURE(status)) {
result = -ENODEV;
goto end;
}
}
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
goto end;
}
}
end:
if (result)
printk(KERN_WARNING PREFIX
"Transitioning device [%s] to D%d\n",
device->pnp.bus_id, state);
else {
device->power.state = state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
device->pnp.bus_id, state));
}
return result;
}
