C++ (Cpp) add_mtd_concat_notifier Examples

Example #1

File: dev-m25p80.c Project: 981213/openwrt

void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
{
	multi_pdata = pdata;
	add_mtd_concat_notifier();
	ath79_spi_data.bus_num = 0;
	ath79_spi_data.num_chipselect = 2;
	ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
}

Example #2

File: mach-wzr-hp-ag300h.c Project: dtaht/Cerowrt.rc7

static void __init wzrhpag300h_setup(void)
{
	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
	u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
	u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
	u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;

	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1);

	ar71xx_add_device_mdio(0, ~(BIT(0) | BIT(4)));

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth0_data.speed = SPEED_1000;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;
	ar71xx_eth0_data.phy_mask = BIT(0);

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth1_data.phy_mask = BIT(4);

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_usb();
	gpio_request(2, "usb");
	gpio_direction_output(2, 1);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
					wzrhpag300h_leds_gpio);

	ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
					 ARRAY_SIZE(wzrhpag300h_gpio_keys),
					 wzrhpag300h_gpio_keys);

	ar71xx_add_device_spi(NULL, ar71xx_spi_info,
			      ARRAY_SIZE(ar71xx_spi_info));

	add_mtd_concat_notifier();

	ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
}