Example #1
0
static void adp5588_work(struct work_struct *work)
{
	struct adp5588_kpad *kpad = container_of(work,
						struct adp5588_kpad, work.work);
	struct i2c_client *client = kpad->client;
	int i, key, status, ev_cnt;

	status = adp5588_read(client, INT_STAT);

	if (status & OVR_FLOW_INT)	/* Unlikely and should never happen */
		dev_err(&client->dev, "Event Overflow Error\n");

	if (status & KE_INT) {
		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
		if (ev_cnt) {
			for (i = 0; i < ev_cnt; i++) {
				key = adp5588_read(client, Key_EVENTA + i);
				input_report_key(kpad->input,
					kpad->keycode[(key & KEY_EV_MASK) - 1],
					key & KEY_EV_PRESSED);
			}
			input_sync(kpad->input);
		}
	}
	adp5588_write(client, INT_STAT, status); /* Status is W1C */
}
Example #2
0
static int adp5588_gpio_add(struct adp5588_kpad *kpad)
{
	struct device *dev = &kpad->client->dev;
	const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
	int i, error;

	if (!gpio_data)
		return 0;

	kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
	if (kpad->gc.ngpio == 0) {
		dev_info(dev, "No unused gpios left to export\n");
		return 0;
	}

	kpad->export_gpio = true;

	kpad->gc.direction_input = adp5588_gpio_direction_input;
	kpad->gc.direction_output = adp5588_gpio_direction_output;
	kpad->gc.get = adp5588_gpio_get_value;
	kpad->gc.set = adp5588_gpio_set_value;
	kpad->gc.can_sleep = 1;

	kpad->gc.base = gpio_data->gpio_start;
	kpad->gc.label = kpad->client->name;
	kpad->gc.owner = THIS_MODULE;
	kpad->gc.names = gpio_data->names;

	mutex_init(&kpad->gpio_lock);

	error = gpiochip_add_data(&kpad->gc, kpad);
	if (error) {
		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
		return error;
	}

	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
		kpad->dat_out[i] = adp5588_read(kpad->client,
						GPIO_DAT_OUT1 + i);
		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
	}

	if (gpio_data->setup) {
		error = gpio_data->setup(kpad->client,
					 kpad->gc.base, kpad->gc.ngpio,
					 gpio_data->context);
		if (error)
			dev_warn(dev, "setup failed, %d\n", error);
	}

	return 0;
}
Example #3
0
static int adp5588_setup(struct i2c_client *client)
{
	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
	int i, ret;

	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
	ret |= 	adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
	ret |= 	adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);

	if (pdata->en_keylock) {
		ret |= 	adp5588_write(client, UNLOCK1, pdata->unlock_key1);
		ret |= 	adp5588_write(client, UNLOCK2, pdata->unlock_key2);
		ret |= 	adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
	}

	for (i = 0; i < KEYP_MAX_EVENT; i++)
		ret |= adp5588_read(client, Key_EVENTA);

	ret |= 	adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
					OVR_FLOW_INT | K_LCK_INT |
					GPI_INT | KE_INT); /* Status is W1C */

	ret |= 	adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);

	if (ret < 0) {
		dev_err(&client->dev, "Write Error\n");
		return ret;
	}

	return 0;
}
Example #4
0
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);

	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
}
Example #5
0
static void adp5588_work(struct work_struct *work)
{
	struct adp5588_kpad *kpad = container_of(work,
						struct adp5588_kpad, work.work);
	struct i2c_client *client = kpad->client;
	int status, ev_cnt;

	status = adp5588_read(client, INT_STAT);

	if (status & ADP5588_OVR_FLOW_INT)	/* Unlikely and should never happen */
		dev_err(&client->dev, "Event Overflow Error\n");

	if (status & ADP5588_KE_INT) {
		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
		if (ev_cnt) {
			adp5588_report_events(kpad, ev_cnt);
			input_sync(kpad->input);
		}
	}
	adp5588_write(client, INT_STAT, status); /* Status is W1C */
}
Example #6
0
static void adp5588_report_switch_state(struct adp5588_kpad *kpad)
{
	int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
	int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
	int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
	int gpi_stat_tmp, pin_loc;
	int i;

	for (i = 0; i < kpad->gpimapsize; i++) {
		unsigned short pin = kpad->gpimap[i].pin;

		if (pin <= GPI_PIN_ROW_END) {
			gpi_stat_tmp = gpi_stat1;
			pin_loc = pin - GPI_PIN_ROW_BASE;
		} else if ((pin - GPI_PIN_COL_BASE) < 8) {
			gpi_stat_tmp = gpi_stat2;
			pin_loc = pin - GPI_PIN_COL_BASE;
		} else {
			gpi_stat_tmp = gpi_stat3;
			pin_loc = pin - GPI_PIN_COL_BASE - 8;
		}

		if (gpi_stat_tmp < 0) {
			dev_err(&kpad->client->dev,
				"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
				pin);
			gpi_stat_tmp = 0;
		}

		input_report_switch(kpad->input,
				    kpad->gpimap[i].sw_evt,
				    !(gpi_stat_tmp & (1 << pin_loc)));
	}

	input_sync(kpad->input);
}
Example #7
0
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
	int val;

	mutex_lock(&kpad->gpio_lock);

	if (kpad->dir[bank] & bit)
		val = kpad->dat_out[bank];
	else
		val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);

	mutex_unlock(&kpad->gpio_lock);

	return !!(val & bit);
}
Example #8
0
static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
{
	int i, j;

	for (i = 0; i < ev_cnt; i++) {
		int key = adp5588_read(kpad->client, Key_EVENTA + i);
		int key_val = key & KEY_EV_MASK;

		if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
			for (j = 0; j < kpad->gpimapsize; j++) {
				if (key_val == kpad->gpimap[j].pin) {
					input_report_switch(kpad->input,
							kpad->gpimap[j].sw_evt,
							key & KEY_EV_PRESSED);
					break;
				}
			}
		} else {
			input_report_key(kpad->input,
					 kpad->keycode[key_val - 1],
					 key & KEY_EV_PRESSED);
		}
	}
}
Example #9
0
static int adp5588_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
{
	struct adp5588_kpad *kpad;
	const struct adp5588_kpad_platform_data *pdata =
			dev_get_platdata(&client->dev);
	struct input_dev *input;
	unsigned int revid;
	int ret, i;
	int error;

	if (!i2c_check_functionality(client->adapter,
					I2C_FUNC_SMBUS_BYTE_DATA)) {
		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
		return -EIO;
	}

	if (!pdata) {
		dev_err(&client->dev, "no platform data?\n");
		return -EINVAL;
	}

	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
		dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
		return -EINVAL;
	}

	if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
		dev_err(&client->dev, "invalid keymapsize\n");
		return -EINVAL;
	}

	if (!pdata->gpimap && pdata->gpimapsize) {
		dev_err(&client->dev, "invalid gpimap from pdata\n");
		return -EINVAL;
	}

	if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
		dev_err(&client->dev, "invalid gpimapsize\n");
		return -EINVAL;
	}

	for (i = 0; i < pdata->gpimapsize; i++) {
		unsigned short pin = pdata->gpimap[i].pin;

		if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
			dev_err(&client->dev, "invalid gpi pin data\n");
			return -EINVAL;
		}

		if (pin <= GPI_PIN_ROW_END) {
			if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
				dev_err(&client->dev, "invalid gpi row data\n");
				return -EINVAL;
			}
		} else {
			if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
				dev_err(&client->dev, "invalid gpi col data\n");
				return -EINVAL;
			}
		}
	}

	if (!client->irq) {
		dev_err(&client->dev, "no IRQ?\n");
		return -EINVAL;
	}

	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
	input = input_allocate_device();
	if (!kpad || !input) {
		error = -ENOMEM;
		goto err_free_mem;
	}

	kpad->client = client;
	kpad->input = input;
	INIT_DELAYED_WORK(&kpad->work, adp5588_work);

	ret = adp5588_read(client, DEV_ID);
	if (ret < 0) {
		error = ret;
		goto err_free_mem;
	}

	revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
	if (WA_DELAYED_READOUT_REVID(revid))
		kpad->delay = msecs_to_jiffies(30);

	input->name = client->name;
	input->phys = "adp5588-keys/input0";
	input->dev.parent = &client->dev;

	input_set_drvdata(input, kpad);

	input->id.bustype = BUS_I2C;
	input->id.vendor = 0x0001;
	input->id.product = 0x0001;
	input->id.version = revid;

	input->keycodesize = sizeof(kpad->keycode[0]);
	input->keycodemax = pdata->keymapsize;
	input->keycode = kpad->keycode;

	memcpy(kpad->keycode, pdata->keymap,
		pdata->keymapsize * input->keycodesize);

	kpad->gpimap = pdata->gpimap;
	kpad->gpimapsize = pdata->gpimapsize;

	/* setup input device */
	__set_bit(EV_KEY, input->evbit);

	if (pdata->repeat)
		__set_bit(EV_REP, input->evbit);

	for (i = 0; i < input->keycodemax; i++)
		if (kpad->keycode[i] <= KEY_MAX)
			__set_bit(kpad->keycode[i], input->keybit);
	__clear_bit(KEY_RESERVED, input->keybit);

	if (kpad->gpimapsize)
		__set_bit(EV_SW, input->evbit);
	for (i = 0; i < kpad->gpimapsize; i++)
		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);

	error = input_register_device(input);
	if (error) {
		dev_err(&client->dev, "unable to register input device\n");
		goto err_free_mem;
	}

	error = request_irq(client->irq, adp5588_irq,
			    IRQF_TRIGGER_FALLING,
			    client->dev.driver->name, kpad);
	if (error) {
		dev_err(&client->dev, "irq %d busy?\n", client->irq);
		goto err_unreg_dev;
	}

	error = adp5588_setup(client);
	if (error)
		goto err_free_irq;

	if (kpad->gpimapsize)
		adp5588_report_switch_state(kpad);

	error = adp5588_gpio_add(kpad);
	if (error)
		goto err_free_irq;

	device_init_wakeup(&client->dev, 1);
	i2c_set_clientdata(client, kpad);

	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
	return 0;

 err_free_irq:
	free_irq(client->irq, kpad);
	cancel_delayed_work_sync(&kpad->work);
 err_unreg_dev:
	input_unregister_device(input);
	input = NULL;
 err_free_mem:
	input_free_device(input);
	kfree(kpad);

	return error;
}
Example #10
0
static int adp5588_setup(struct i2c_client *client)
{
	const struct adp5588_kpad_platform_data *pdata =
			dev_get_platdata(&client->dev);
	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
	int i, ret;
	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;

	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
	ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);

	if (pdata->en_keylock) {
		ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
		ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
		ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
	}

	for (i = 0; i < KEYP_MAX_EVENT; i++)
		ret |= adp5588_read(client, Key_EVENTA);

	for (i = 0; i < pdata->gpimapsize; i++) {
		unsigned short pin = pdata->gpimap[i].pin;

		if (pin <= GPI_PIN_ROW_END) {
			evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
		} else {
			evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
			evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
		}
	}

	if (pdata->gpimapsize) {
		ret |= adp5588_write(client, GPI_EM1, evt_mode1);
		ret |= adp5588_write(client, GPI_EM2, evt_mode2);
		ret |= adp5588_write(client, GPI_EM3, evt_mode3);
	}

	if (gpio_data) {
		for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
			int pull_mask = gpio_data->pullup_dis_mask;

			ret |= adp5588_write(client, GPIO_PULL1 + i,
				(pull_mask >> (8 * i)) & 0xFF);
		}
	}

	ret |= adp5588_write(client, INT_STAT,
				ADP5588_CMP2_INT | ADP5588_CMP1_INT |
				ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
				ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */

	ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
					  ADP5588_OVR_FLOW_IEN |
					  ADP5588_KE_IEN);

	if (ret < 0) {
		dev_err(&client->dev, "Write Error\n");
		return ret;
	}

	return 0;
}
Example #11
0
static int __devinit adp5588_probe(struct i2c_client *client,
					const struct i2c_device_id *id)
{
	struct adp5588_kpad *kpad;
	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
	struct input_dev *input;
	int ret, i;
	u8 revid;

	if (!i2c_check_functionality(client->adapter,
					I2C_FUNC_SMBUS_BYTE_DATA)) {
		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
		return -EIO;
	}

	if (!pdata) {
		dev_err(&client->dev, "no platform data?\n");
		return -ENODEV;
	}

	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
		dev_err(&client->dev,
			": No rows, cols or keymap from pdata\n");
		return -EINVAL;
	}

	if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
		dev_err(&client->dev, ": Invalid keymapsize\n");
		return -EINVAL;
	}

	if (!client->irq) {
		dev_err(&client->dev, "no IRQ?\n");
		return -ENODEV;
	}

	kpad = kzalloc(sizeof(struct adp5588_kpad), GFP_KERNEL);
	if (!kpad)
		return -ENOMEM;

	input = input_allocate_device();
	if (!input) {
		kfree(kpad);
		return -ENOMEM;
	}

	i2c_set_clientdata(client, kpad);
	kpad->client = client;

	ret = adp5588_read(client, DEV_ID);

	if (ret < 0) {
		input_free_device(input);
		goto out1;
	}

	revid = (u8) ret;

	INIT_DELAYED_WORK(&kpad->work, adp5588_work);
	kpad->input = input;

	input->name = client->name;
	input->phys = "adp5588-keys/inputX";
	input->dev.parent = &client->dev;

	input_set_drvdata(input, kpad);

	input->id.bustype = BUS_I2C;
	input->id.vendor = 0x0001;
	input->id.product = 0x0001;
	input->id.version = revid;

	input->keycodesize = sizeof(unsigned short);
	input->keycodemax = pdata->keymapsize;
	input->keycode = kpad->keycode;

	memcpy(kpad->keycode, pdata->keymap,
		pdata->keymapsize * input->keycodesize);

	/* setup input device */
	__set_bit(EV_KEY, input->evbit);

	if (pdata->repeat)
		__set_bit(EV_REP, input->evbit);

	for (i = 0; i < input->keycodemax; i++)
		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
	__clear_bit(KEY_RESERVED, input->keybit);

	ret = input_register_device(input);
	if (ret) {
		dev_err(&client->dev,
			": Unable to register input device (%d)\n", ret);
		input_free_device(input);
		goto out1;
	}

	ret = request_irq(client->irq, adp5588_irq, IRQF_TRIGGER_FALLING |
		IRQF_DISABLED,
		client->dev.driver->name, kpad);
	if (ret) {
		dev_err(&client->dev, "irq %d busy?\n", client->irq);
		goto out2;
	}

	ret = adp5588_setup(client);
	if (ret)
		goto out3;

	dev_info(&client->dev, "Rev.%d keypad, irq %d\n",
		revid, client->irq);

	return ret;

out3:
	free_irq(client->irq, kpad);
out2:
	input_unregister_device(input);
out1:
	i2c_set_clientdata(client, NULL);
	kfree(kpad);

	return ret;
}