int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Reader...\n",
__FUNCTION__);
ret_val = StratixII_dump (desc, buf, bsize);
break;
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
int altera_reloc( Altera_desc *desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
#if (CONFIG_FPGA & CFG_ACEX1K)
ret_val = ACEX1K_reloc (desc, reloc_offset);
#else
printf ("%s: No support for ACEX devices.\n",
__FUNCTION__);
#endif
break;
case Altera_CYC2:
#if (CONFIG_FPGA & CFG_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for CYCLON II devices.\n",
__FUNCTION__);
#endif
break;
/* Add new family types here */
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
/* ------------------------------------------------------------------------- */
int altera_load( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
#elif (CONFIG_FPGA & CFG_CYCLON2)
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
static const struct altera_fpga *
altera_desc_to_fpga(Altera_desc *desc, const char *fn)
{
int i;
if (altera_validate(desc, fn)) {
printf("%s: Invalid device descriptor\n", fn);
return NULL;
}
for (i = 0; i < ARRAY_SIZE(altera_fpga); i++) {
if (desc->family == altera_fpga[i].family)
break;
}
if (i == ARRAY_SIZE(altera_fpga)) {
printf("%s: Unsupported family type, %d\n", fn, desc->family);
return NULL;
}
return &altera_fpga[i];
}
int altera_info( Altera_desc *desc )
{
int ret_val = FPGA_FAIL;
if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
case Altera_CYC2:
printf ("CYCLON II\n");
break;
case Altera_StratixII:
printf ("Stratix II\n");
break;
/* Add new family types here */
default:
printf ("Unknown family type, %d\n", desc->family);
}
printf ("Interface type:\t");
switch (desc->iface) {
case passive_serial:
printf ("Passive Serial (PS)\n");
break;
case passive_parallel_synchronous:
printf ("Passive Parallel Synchronous (PPS)\n");
break;
case passive_parallel_asynchronous:
printf ("Passive Parallel Asynchronous (PPA)\n");
break;
case passive_serial_asynchronous:
printf ("Passive Serial Asynchronous (PSA)\n");
break;
case altera_jtag_mode: /* Not used */
printf ("JTAG Mode\n");
break;
case fast_passive_parallel:
printf ("Fast Passive Parallel (FPP)\n");
break;
case fast_passive_parallel_security:
printf
("Fast Passive Parallel with Security (FPPS) \n");
break;
/* Add new interface types here */
default:
printf ("Unsupported interface type, %d\n", desc->iface);
}
printf ("Device Size: \t%d bytes\n"
"Cookie: \t0x%x (%d)\n",
desc->size, desc->cookie, desc->cookie);
if (desc->iface_fns) {
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
StratixII_info (desc);
break;
#endif
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
break;
}
} else {
printf ("No Device Function Table.\n");
}
ret_val = FPGA_SUCCESS;
} else {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
}
return ret_val;
}
