C++ (Cpp) am335x_pinmux_uart1 Examples

Example #1

File: bootblock.c Project: tidatida/coreboot

void bootblock_mainboard_init(void)
{
	void *uart_clock_ctrl = NULL;

	/* Enable the GPIO module */
	writel((0x2 << 0) | (1 << 18), (uint32_t *)(0x44e00000 + 0xac));

	/* Disable interrupts from these GPIOs */
	setbits_le32((uint32_t *)(0x4804c000 + 0x3c), 0xf << 21);

	/* Enable output */
	clrbits_le32((uint32_t *)(0x4804c000 + 0x134), 0xf << 21);

	/* Set every other light */
	clrbits_le32((uint32_t *)(0x4804c000 + 0x13c), 0xf << 21);
	setbits_le32((uint32_t *)(0x4804c000 + 0x13c), 0x5 << 21);

	/* Set up the UART we're going to use */
	if (CONFIG_UART_FOR_CONSOLE == 0) {
		am335x_pinmux_uart0();
		uart_clock_ctrl = (void *)(uintptr_t)(0x44e00400 + 0xb4);
	} else if (CONFIG_UART_FOR_CONSOLE == 1) {
		am335x_pinmux_uart1();
		uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x6c);
	} else if (CONFIG_UART_FOR_CONSOLE == 2) {
		am335x_pinmux_uart2();
		uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x70);
	} else if (CONFIG_UART_FOR_CONSOLE == 3) {
		am335x_pinmux_uart3();
		uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x74);
	} else if (CONFIG_UART_FOR_CONSOLE == 4) {
		am335x_pinmux_uart4();
		uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x78);
	} else if (CONFIG_UART_FOR_CONSOLE == 5) {
		am335x_pinmux_uart5();
		uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x38);
	}
	if (uart_clock_ctrl)
		writel(0x2, uart_clock_ctrl);

	/* Start monotonic timer */
	//rtc_start();
}

Example #2

File: bootblock.c Project: Oxyoptia/coreboot

void bootblock_mainboard_init(void)
{
	write32(&am335x_cm_wkup->wkup_gpio0, CM_ST_SW_WKUP | CM_FCLK_EN);
	write32(&am335x_cm_per->gpio1, CM_ST_SW_WKUP | CM_FCLK_EN);
	write32(&am335x_cm_per->gpio2, CM_ST_SW_WKUP | CM_FCLK_EN);
	write32(&am335x_cm_per->gpio3, CM_ST_SW_WKUP | CM_FCLK_EN);

	am335x_disable_gpio_irqs();

	beaglebone_leds_init();
	beaglebone_leds_set(BEAGLEBONE_LED_USR0, 1);
	beaglebone_leds_set(BEAGLEBONE_LED_USR1, 0);
	beaglebone_leds_set(BEAGLEBONE_LED_USR2, 1);
	beaglebone_leds_set(BEAGLEBONE_LED_USR3, 0);

	/* Set up the UART we're going to use */
	if (CONFIG_UART_FOR_CONSOLE == 0) {
		am335x_pinmux_uart0();
		write32(&am335x_cm_wkup->wkup_uart0, CM_ST_SW_WKUP);
	} else if (CONFIG_UART_FOR_CONSOLE == 1) {
		am335x_pinmux_uart1();
		write32(&am335x_cm_per->uart1, CM_ST_SW_WKUP);
	} else if (CONFIG_UART_FOR_CONSOLE == 2) {
		am335x_pinmux_uart2();
		write32(&am335x_cm_per->uart2, CM_ST_SW_WKUP);
	} else if (CONFIG_UART_FOR_CONSOLE == 3) {
		am335x_pinmux_uart3();
		write32(&am335x_cm_per->uart3, CM_ST_SW_WKUP);
	} else if (CONFIG_UART_FOR_CONSOLE == 4) {
		am335x_pinmux_uart4();
		write32(&am335x_cm_per->uart4, CM_ST_SW_WKUP);
	} else if (CONFIG_UART_FOR_CONSOLE == 5) {
		am335x_pinmux_uart5();
		write32(&am335x_cm_per->uart5, CM_ST_SW_WKUP);
	}

	/* Start monotonic timer */
	//rtc_start();
}