void
squidboy(int apicno, Mach *m)
{
// FIX QEMU. extern int64_t hz;
int64_t hz;
sys->machptr[m->machno] = m;
/*
* Need something for initial delays
* until a timebase is worked out.
*/
m->cpuhz = 2000000000ll;
m->cpumhz = 2000;
m->perf.period = 1;
m->nixtype = NIXAC;
// no NIXAC for now.
m->nixtype = NIXTC;
// NOTE: you can't do ANYTHING here before vsvminit.
// PRINT WILL PANIC. So wait.
vsvminit(MACHSTKSZ, m->nixtype, m);
//DBG("Hello squidboy %d %d\n", apicno, m->machno);
/*
* Beware the Curse of The Non-Interruptable Were-Temporary.
*/
hz = archhz();
/* Intel cpu's in archk10 must be reviewed */
if(hz == 0)
hz = 2000000000ll;
m->cpuhz = hz;
m->cyclefreq = hz;
m->cpumhz = hz/1000000ll;
mmuinit();
if(!apiconline())
ndnr();
fpuinit();
acmodeset(m->nixtype);
m->splpc = 0;
m->online = 1;
/*
* CAUTION: no time sync done, etc.
* Stupid print to avoid up = nil or
* last cpu couldn't start in nixquids.
*/
DBG("Wait for the thunderbirds!\n");
while(!active.thunderbirdsarego)
;
wrmsr(0x10, sys->epoch);
m->rdtsc = rdtsc();
print("cpu%d color %d role %s tsc %lld\n",
m->machno, corecolor(m->machno), rolename[m->nixtype], m->rdtsc);
switch(m->nixtype){
case NIXAC:
acmmuswitch();
acinit();
adec(&active.nbooting);
ainc(&active.nonline); /* this was commented out */
acsched();
panic("squidboy");
break;
case NIXTC:
/*
* We only need the idt and syscall entry point actually.
* At boot time the boot processor might set our role after
* we have decided to become an AC.
*/
vsvminit(MACHSTKSZ, NIXTC, m);
/*
* Enable the timer interrupt.
*/
apictimerenab();
apicpri(0);
timersinit();
adec(&active.nbooting);
ainc(&active.nonline);
/* Ready? steady? going to timer */
ndnr();
schedinit();
break;
}
panic("squidboy returns (type %d)", m->nixtype);
}
void
main(uint32_t ax, uint32_t bx)
{
int64_t hz;
memset(edata, 0, end - edata);
/*
* ilock via i8250enable via i8250console
* needs machp()->machno, sys->machptr[] set, and
* also 'up' set to nil.
*/
cgapost(sizeof(uintptr)*8);
memset(m, 0, sizeof(Mach));
machp()->machno = 0;
m->online = 1;
m->nixtype = NIXTC;
sys->machptr[machp()->machno] = &sys->mach;
m->stack = PTR2UINT(sys->machstk);
m->vsvm = sys->vsvmpage;
up = nil;
active.nonline = 1;
active.exiting = 0;
active.nbooting = 0;
asminit();
multiboot(ax, bx, 0);
options(oargc, oargv);
crapoptions();
/*
* Need something for initial delays
* until a timebase is worked out.
*/
m->cpuhz = 2000000000ll;
m->cpumhz = 2000;
cgainit();
i8250console("0");
consputs = cgaconsputs;
vsvminit(MACHSTKSZ, NIXTC);
conf.nmach = 1;
fmtinit();
print("\nNIX\n");
if(vflag){
print("&ax = %#p, ax = %#ux, bx = %#ux\n", &ax, ax, bx);
multiboot(ax, bx, vflag);
}
m->perf.period = 1;
if((hz = archhz()) != 0ll){
m->cpuhz = hz;
m->cyclefreq = hz;
m->cpumhz = hz/1000000ll;
}
/*
* Mmuinit before meminit because it
* flushes the TLB via machp()->pml4->pa.
*/
mmuinit();
ioinit();
kbdinit();
meminit();
confinit();
archinit();
mallocinit();
/*
* Acpiinit will cause the first malloc
* call to happen.
* If the system dies here it's probably due
* to malloc not being initialised
* correctly, or the data segment is misaligned
* (it's amazing how far you can get with
* things like that completely broken).
*/
acpiinit();
umeminit();
trapinit();
printinit();
/*
* This is necessary with GRUB and QEMU.
* Without it an interrupt can occur at a weird vector,
* because the vector base is likely different, causing
* havoc. Do it before any APIC initialisation.
*/
i8259init(32);
procinit0();
mpsinit(maxcores);
apiconline();
sipi();
timersinit();
kbdenable();
fpuinit();
psinit(conf.nproc);
initimage();
links();
devtabreset();
pageinit();
swapinit();
userinit();
nixsquids();
testiccs();
print("schedinit...\n");
schedinit();
}
void
squidboy(int apicno)
{
char *n[] = {
[NIXAC] "AC",
[NIXTC] "TC",
[NIXKC] "KC"
};
vlong hz;
sys->machptr[machp()->machno] = m;
setmachsched(m);
/*
* Need something for initial delays
* until a timebase is worked out.
*/
m->cpuhz = 2000000000ll;
m->cpumhz = 2000;
m->perf.period = 1;
m->nixtype = NIXAC;
DBG("Hello Squidboy %d %d\n", apicno, machp()->machno);
vsvminit(MACHSTKSZ, m->nixtype);
/*
* Beware the Curse of The Non-Interruptable Were-Temporary.
*/
hz = archhz();
if(hz == 0)
ndnr();
m->cpuhz = hz;
m->cyclefreq = hz;
m->cpumhz = hz/1000000ll;
mmuinit();
if(!apiconline())
ndnr();
fpuinit();
acmodeset(m->nixtype);
m->splpc = 0;
m->online = 1;
/*
* CAUTION: no time sync done, etc.
*/
DBG("Wait for the thunderbirds!\n");
while(!active.thunderbirdsarego)
;
wrmsr(0x10, sys->epoch);
m->rdtsc = rdtsc();
print("cpu%d color %d role %s tsc %lld\n",
machp()->machno, corecolor(machp()->machno), n[m->nixtype], m->rdtsc);
switch(m->nixtype){
case NIXAC:
acmmuswitch();
acinit();
adec(&active.nbooting);
ainc(&active.nonline); /* this was commented out */
acsched();
panic("squidboy");
break;
case NIXTC:
/*
* We only need the idt and syscall entry point actually.
* At boot time the boot processor might set our role after
* we have decided to become an AC.
*/
vsvminit(MACHSTKSZ, NIXTC);
/*
* Enable the timer interrupt.
*/
apicpri(0);
timersinit();
adec(&active.nbooting);
ainc(&active.nonline); /* this was commented out */
schedinit();
break;
}
panic("squidboy returns (type %d)", m->nixtype);
}
void
main(uint32_t mbmagic, uint32_t mbaddress)
{
Mach *m = entrym;
/* when we get here, entrym is set to core0 mach. */
sys->machptr[m->machno] = m;
// Very special case for BSP only. Too many things
// assume this is set.
wrmsr(GSbase, PTR2UINT(&sys->machptr[m->machno]));
if (machp() != m)
panic("m and machp() are different!!\n");
assert(sizeof(Mach) <= PGSZ);
/*
* Check that our data is on the right boundaries.
* This works because the immediate value is in code.
*/
if (x != 0x123456)
panic("Data is not set up correctly\n");
memset(edata, 0, end - edata);
m = (void *) (KZERO + 1048576 + 11*4096);
sys = (void *) (KZERO + 1048576);
/*
* ilock via i8250enable via i8250console
* needs m->machno, sys->machptr[] set, and
* also 'up' set to nil.
*/
cgapost(sizeof(uintptr_t)*8);
memset(m, 0, sizeof(Mach));
m->machno = 0;
m->online = 1;
m->nixtype = NIXTC;
sys->machptr[m->machno] = &sys->mach;
m->stack = PTR2UINT(sys->machstk);
*(uintptr_t*)m->stack = STACKGUARD;
m->vsvm = sys->vsvmpage;
m->externup = (void *)0;
active.nonline = 1;
active.exiting = 0;
active.nbooting = 0;
asminit();
multiboot(mbmagic, mbaddress, 0);
options(oargc, oargv);
/*
* Need something for initial delays
* until a timebase is worked out.
*/
m->cpuhz = 2000000000ll;
m->cpumhz = 2000;
cgainit();
i8250console("0");
consputs = cgaconsputs;
/* It all ends here. */
vsvminit(MACHSTKSZ, NIXTC, m);
if (machp() != m)
panic("After vsvminit, m and machp() are different");
sys->nmach = 1;
fmtinit();
print("\nHarvey\n");
if(vflag){
multiboot(mbmagic, mbaddress, vflag);
}
m->perf.period = 1;
if((hz = archhz()) != 0ll){
m->cpuhz = hz;
m->cyclefreq = hz;
m->cpumhz = hz/1000000ll;
}
//iprint("archhz returns 0x%lld\n", hz);
//iprint("NOTE: if cpuidhz runs too fast, we get die early with a NULL pointer\n");
//iprint("So, until that's fixed, we bring up AP cores slowly. Sorry!\n");
/*
* Mmuinit before meminit because it
* flushes the TLB via m->pml4->pa.
*/
mmuinit();
ioinit();
meminit();
confinit();
archinit();
mallocinit();
/* test malloc. It's easier to find out it's broken here,
* not deep in some call chain.
* See next note.
*
void *v = malloc(1234);
hi("v "); put64((uint64_t)v); hi("\n");
free(v);
hi("free ok\n");
*/
/*
* Acpiinit will cause the first malloc
* call to happen.
* If the system dies here it's probably due
* to malloc not being initialised
* correctly, or the data segment is misaligned
* (it's amazing how far you can get with
* things like that completely broken).
*/
if (0){ acpiinit(); hi(" acpiinit();\n");}
umeminit();
trapinit();
/*
* This is necessary with GRUB and QEMU.
* Without it an interrupt can occur at a weird vector,
* because the vector base is likely different, causing
* havoc. Do it before any APIC initialisation.
*/
i8259init(32);
procinit0();
mpsinit(maxcores);
apiconline();
/* Forcing to single core if desired */
if(!nosmp) {
sipi();
}
teardownidmap(m);
timersinit();
fpuinit();
psinit(conf.nproc);
initimage();
links();
keybinit();
keybenable();
mouseenable();
devtabreset();
pageinit();
swapinit();
userinit();
/* Forcing to single core if desired */
if(!nosmp) {
nixsquids();
testiccs();
}
print("CPU Freq. %dMHz\n", m->cpumhz);
print("schedinit...\n");
schedinit();
}
