C++ (Cpp) ar913x_add_device_wmac Examples

Example #1

File: mach-wzr-hp-g300nh.c Project: roccozhang/wtp-simulator

static void __init wzrhpg300nh_setup(void)
{
	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);

	ar71xx_set_mac_base(eeprom + WZRHPG300NH_MAC_OFFSET);

	ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
	ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth0_data.speed = SPEED_1000;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
	ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_usb();
	ar913x_add_device_wmac(eeprom, NULL);

	platform_device_register(&wzrhpg300nh_74hc153_device);
	platform_device_register(&wzrhpg300nh_flash_device);
	platform_device_register(&wzrhpg300nh_rtl8366s_device);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
				    wzrhpg300nh_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, WZRHPG300NH_BUTTONS_POLL_INTERVAL,
				       ARRAY_SIZE(wzrhpg300nh_gpio_buttons),
				       wzrhpg300nh_gpio_buttons);

}

Example #2

File: mach-mzk-w04nu.c Project: anchowee/linino

static void __init mzk_w04nu_setup(void)
{
	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);

	ar71xx_set_mac_base(eeprom);

	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;
	ar71xx_eth0_data.has_ar8216 = 1;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_m25p80(&mzk_w04nu_flash_data);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
					mzk_w04nu_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(mzk_w04nu_gpio_buttons),
					mzk_w04nu_gpio_buttons);
	ar71xx_add_device_usb();

	ar913x_add_device_wmac(eeprom, NULL);
}

Example #3

static void __init dir_615c1_setup(void)
{
	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.phy_mask = 0xf;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_m25p80(&dir_615c1_flash_data);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
					dir_615c1_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(dir_615c1_gpio_buttons),
					dir_615c1_gpio_buttons);

	ar913x_add_device_wmac();
}

Example #4

File: mach-wrt160nl.c Project: jumoog/openwrt

static void __init wrt160nl_setup(void)
{
	const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
	u8 mac[6];

	if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
				 "lan_hwaddr=", mac) == 0) {
		ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
		ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
	}

	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.phy_mask = 0x01;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_m25p80(&wrt160nl_flash_data);

	ar71xx_add_device_usb();

	if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
				 "wl0_hwaddr=", mac) == 0)
		ar913x_add_device_wmac(eeprom, mac);
	else
		ar913x_add_device_wmac(eeprom, NULL);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
					wrt160nl_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, WRT160NL_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(wrt160nl_gpio_buttons),
					wrt160nl_gpio_buttons);

}

Example #5

File: mach-dir-615-c1.c Project: anchowee/linino

static void __init dir_615c1_setup(void)
{
	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
	u8 mac[6];
	u8 *wlan_mac = NULL;

	if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
			         "lan_mac=", mac) == 0) {
		ar71xx_set_mac_base(mac);
		wlan_mac = mac;
	}

	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_m25p80(&dir_615c1_flash_data);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
					dir_615c1_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(dir_615c1_gpio_buttons),
					dir_615c1_gpio_buttons);

	ar913x_add_device_wmac(eeprom, wlan_mac);
}

Example #6

File: mach-ap83.c Project: roccozhang/wtp-simulator

static void __init ap83_generic_setup(void)
{
	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);

	ar71xx_set_mac_base(eeprom);

	ar71xx_add_device_mdio(0xfffffffe);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth0_data.phy_mask = 0x1;

	ar71xx_add_device_eth(0);

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
	ar71xx_eth1_data.speed = SPEED_1000;
	ar71xx_eth1_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;

	ar71xx_add_device_eth(1);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
					ap83_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(ap83_gpio_buttons),
					ap83_gpio_buttons);

	ar71xx_add_device_usb();

	ar913x_add_device_wmac(eeprom, NULL);

	platform_device_register(&ap83_flash_device);

	spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
}