Example #1
0
int main(void)
{
//! [init]
	/* Init system. */
//! [system_init]
	system_init();
//! [system_init]
	/* Configure device and enable. */
//! [temp_init]
	at30tse_init();
//! [temp_init]
//! [init]

//! [impl]
    /* Read thigh and tlow */
//! [read_thigh]
	volatile uint16_t thigh = 0;
	thigh = at30tse_read_register(AT30TSE_THIGH_REG,
			AT30TSE_NON_VOLATILE_REG, AT30TSE_THIGH_REG_SIZE);
//! [read_thigh]
//! [read_tlow]
	volatile uint16_t tlow = 0;
	tlow = at30tse_read_register(AT30TSE_TLOW_REG,
			AT30TSE_NON_VOLATILE_REG, AT30TSE_TLOW_REG_SIZE);
//! [read_tlow]

	/* Set 12-bit resolution mode. */
//! [write_conf]
	at30tse_write_config_register(
			AT30TSE_CONFIG_RES(AT30TSE_CONFIG_RES_12_bit));
//! [write_conf]

//! [read_temp]
	while (1) {
		temp_res = at30tse_read_temperature();
	}
//! [read_temp]
//! [impl]
	UNUSED(tlow);
	UNUSED(thigh);
}
Example #2
0
int main(void)
{
	volatile double temper_value;
	volatile bool data_check_status1 = true,
	              data_check_status2 = true;
	uint32_t i;

	system_clock_config(CLOCK_RESOURCE_XO_26_MHZ, CLOCK_FREQ_26_MHZ);

	/* Initialize AT30TS(E)75x */
	at30tse_init();

	/* First round data check */
	for (i = 0; i < NB_BYTE; i++) {
		tx_buffer[i] = i;
	}

	/* Write pages in EEPROM */
	for (i = 0; i < NB_PAGE; i++) {
		at30tse_eeprom_write(tx_buffer, NB_BYTE, 0, i);
		delay(200);
	}
	
	/* Read each page in EEPROM and compare them */
	for (i = 0; i < NB_PAGE; i++) {
		memset(rx_buffer, 0, NB_BYTE);
		at30tse_eeprom_read(rx_buffer, NB_BYTE, 0, i);
		if (memcmp(tx_buffer, rx_buffer, NB_BYTE)) {
			data_check_status1 = false;
			break;
		}
	}

	/* Second round data check */
	for (i = 0; i < NB_BYTE; i++) {
		tx_buffer[i] = NB_BYTE - i;
	}

	/* Write pages in EEPROM */
	for (i = 0; i < NB_PAGE; i++) {
		at30tse_eeprom_write(tx_buffer, NB_BYTE, 0, i);
		delay(200);
	}
	
	/* Read each page in EEPROM and compare them */
	for (i = 0; i < NB_PAGE; i++) {
		memset(rx_buffer, 0, NB_BYTE);
		at30tse_eeprom_read(rx_buffer, NB_BYTE, 0, i);
		if (memcmp(tx_buffer, rx_buffer, NB_BYTE)) {
			data_check_status2 = false;
			break;
		}
	}

	/* Read thigh and tlow */
	volatile uint16_t thigh = 0;
	thigh = at30tse_read_register(AT30TSE_THIGH_REG,
			AT30TSE_NON_VOLATILE_REG, AT30TSE_THIGH_REG_SIZE);

	volatile uint16_t tlow = 0;
	tlow = at30tse_read_register(AT30TSE_TLOW_REG,
			AT30TSE_NON_VOLATILE_REG, AT30TSE_TLOW_REG_SIZE);
			
	/* Set 12-bit resolution mode. */
	at30tse_write_config_register(
			AT30TSE_CONFIG_RES(AT30TSE_CONFIG_RES_12_bit));

	while (1) {
		/* Read current temperature. */
		temper_value = at30tse_read_temperature();
	}

	UNUSED(data_check_status1);
	UNUSED(data_check_status2);
	UNUSED(temper_value);
	UNUSED(tlow);
	UNUSED(thigh);
}