int iavc_load(capi_softc_t *capi_sc, int len, u_int8_t *cp)
{
iavc_softc_t *sc = (iavc_softc_t*) capi_sc->ctx;
u_int8_t val;
aprint_debug_dev(&sc->sc_dev, "reset card ....\n");
if (sc->sc_dma)
iavc_b1dma_reset(sc); /* PCI cards */
else if (sc->sc_t1)
iavc_t1_reset(sc); /* ISA attachment T1 */
else
iavc_b1_reset(sc); /* ISA attachment B1 */
DELAY(1000);
aprint_debug_dev(&sc->sc_dev, "start loading %d bytes firmware\n", len);
while (len && b1io_save_put_byte(sc, *cp++) == 0)
len--;
if (len) {
aprint_error_dev(&sc->sc_dev, "loading failed, can't write to card, len = %d\n", len);
return (EIO);
}
aprint_debug_dev(&sc->sc_dev, "firmware loaded, wait for ACK\n");
if(sc->sc_capi.card_type == CARD_TYPEC_AVM_B1_ISA)
iavc_put_byte(sc, SEND_POLL);
else
iavc_put_byte(sc, SEND_POLLACK);
for (len = 0; len < 1000 && !iavc_rx_full(sc); len++)
DELAY(100);
if (!iavc_rx_full(sc)) {
aprint_error_dev(&sc->sc_dev, "loading failed, no ack\n");
return (EIO);
}
val = iavc_get_byte(sc);
if ((sc->sc_dma && val != RECEIVE_POLLDWORD) ||
(!sc->sc_dma && val != RECEIVE_POLL)) {
aprint_error_dev(&sc->sc_dev, "loading failed, bad ack = %02x\n", val);
return (EIO);
}
aprint_debug_dev(&sc->sc_dev, "got ACK = 0x%02x\n", val);
/* Start the DMA engine */
if (sc->sc_dma) {
int s;
s = splnet();
sc->sc_csr = AVM_FLAG;
AMCC_WRITE(sc, AMCC_INTCSR, sc->sc_csr);
AMCC_WRITE(sc, AMCC_MCSR, (EN_A2P_TRANSFERS|EN_P2A_TRANSFERS|
A2P_HI_PRIORITY|P2A_HI_PRIORITY|
RESET_A2P_FLAGS|RESET_P2A_FLAGS));
iavc_write_port(sc, 0x07, 0x30); /* XXX magic numbers from */
iavc_write_port(sc, 0x10, 0xf0); /* XXX the linux driver */
bus_dmamap_sync(sc->dmat, sc->rx_map, 0, sc->rx_map->dm_mapsize,
BUS_DMASYNC_PREREAD);
sc->sc_recv1 = 0;
AMCC_WRITE(sc, AMCC_RXPTR, sc->rx_map->dm_segs[0].ds_addr);
AMCC_WRITE(sc, AMCC_RXLEN, 4);
sc->sc_csr |= EN_RX_TC_INT|EN_TX_TC_INT;
AMCC_WRITE(sc, AMCC_INTCSR, sc->sc_csr);
splx(s);
}
#ifdef notyet
/* good happy place */
if(sc->sc_capi.card_type == CARD_TYPEC_AVM_B1_ISA)
b1isa_setup_irq(sc);
#endif
iavc_send_init(sc);
return 0;
}
int iavc_load(capi_softc_t *capi_sc, int len, u_int8_t *cp)
{
iavc_softc_t *sc = (iavc_softc_t*) capi_sc->ctx;
u_int8_t val;
if(bootverbose)
printf("iavc%d: reset card ....\n", sc->sc_unit);
if (sc->sc_dma)
b1dma_reset(sc); /* PCI cards */
else if (sc->sc_t1)
t1_reset(sc); /* ISA attachment T1 */
else
b1_reset(sc); /* ISA attachment B1 */
DELAY(1000);
if(bootverbose)
printf("iavc%d: start loading %d bytes firmware ....\n", sc->sc_unit, len);
while (len && b1io_save_put_byte(sc, *cp++) == 0)
len--;
if (len) {
printf("iavc%d: loading failed, can't write to card, len = %d\n",
sc->sc_unit, len);
return (EIO);
}
if(bootverbose)
printf("iavc%d: firmware loaded, wait for ACK ....\n", sc->sc_unit);
if(sc->sc_capi.card_type == CARD_TYPEC_AVM_B1_ISA)
iavc_put_byte(sc, SEND_POLL);
else
iavc_put_byte(sc, SEND_POLLACK);
for (len = 0; len < 1000 && !iavc_rx_full(sc); len++)
DELAY(100);
if (!iavc_rx_full(sc)) {
printf("iavc%d: loading failed, no ack\n", sc->sc_unit);
return (EIO);
}
val = iavc_get_byte(sc);
if ((sc->sc_dma && val != RECEIVE_POLLDWORD) ||
(!sc->sc_dma && val != RECEIVE_POLL)) {
printf("iavc%d: loading failed, bad ack = %02x\n", sc->sc_unit, val);
return (EIO);
}
if(bootverbose)
printf("iavc%d: got ACK = 0x%02x\n", sc->sc_unit, val);
if (sc->sc_dma) {
/* Start the DMA engine */
int s = SPLI4B();
sc->sc_csr = AVM_FLAG;
AMCC_WRITE(sc, AMCC_INTCSR, sc->sc_csr);
AMCC_WRITE(sc, AMCC_MCSR, (EN_A2P_TRANSFERS|EN_P2A_TRANSFERS|
A2P_HI_PRIORITY|P2A_HI_PRIORITY|
RESET_A2P_FLAGS|RESET_P2A_FLAGS));
iavc_write_port(sc, 0x07, 0x30); /* XXX magic numbers from */
iavc_write_port(sc, 0x10, 0xf0); /* XXX the linux driver */
sc->sc_recvlen = 0;
AMCC_WRITE(sc, AMCC_RXPTR, vtophys(&sc->sc_recvbuf[0]));
AMCC_WRITE(sc, AMCC_RXLEN, 4);
sc->sc_csr |= EN_RX_TC_INT|EN_TX_TC_INT;
AMCC_WRITE(sc, AMCC_INTCSR, sc->sc_csr);
splx(s);
}
if(sc->sc_capi.card_type == CARD_TYPEC_AVM_B1_ISA)
b1isa_setup_irq(sc);
iavc_send_init(sc);
return 0;
}
