void bli_packm_blk_var1( obj_t* c,
obj_t* p,
packm_thrinfo_t* t )
{
num_t dt_cp = bli_obj_datatype( *c );
struc_t strucc = bli_obj_struc( *c );
doff_t diagoffc = bli_obj_diag_offset( *c );
diag_t diagc = bli_obj_diag( *c );
uplo_t uploc = bli_obj_uplo( *c );
trans_t transc = bli_obj_conjtrans_status( *c );
pack_t schema = bli_obj_pack_schema( *p );
bool_t invdiag = bli_obj_has_inverted_diag( *p );
bool_t revifup = bli_obj_is_pack_rev_if_upper( *p );
bool_t reviflo = bli_obj_is_pack_rev_if_lower( *p );
dim_t m_p = bli_obj_length( *p );
dim_t n_p = bli_obj_width( *p );
dim_t m_max_p = bli_obj_padded_length( *p );
dim_t n_max_p = bli_obj_padded_width( *p );
void* buf_c = bli_obj_buffer_at_off( *c );
inc_t rs_c = bli_obj_row_stride( *c );
inc_t cs_c = bli_obj_col_stride( *c );
void* buf_p = bli_obj_buffer_at_off( *p );
inc_t rs_p = bli_obj_row_stride( *p );
inc_t cs_p = bli_obj_col_stride( *p );
inc_t is_p = bli_obj_imag_stride( *p );
dim_t pd_p = bli_obj_panel_dim( *p );
inc_t ps_p = bli_obj_panel_stride( *p );
obj_t kappa;
/*---initialize pointer to stop gcc complaining 2-9-16 GH --- */
obj_t* kappa_p = {0};
void* buf_kappa;
func_t* packm_kers;
void* packm_ker;
FUNCPTR_T f;
// Treatment of kappa (ie: packing during scaling) depends on
// whether we are executing an induced method.
if ( bli_is_ind_packed( schema ) )
{
// The value for kappa we use will depend on whether the scalar
// attached to A has a nonzero imaginary component. If it does,
// then we will apply the scalar during packing to facilitate
// implementing induced complex domain algorithms in terms of
// real domain micro-kernels. (In the aforementioned situation,
// applying a real scalar is easy, but applying a complex one is
// harder, so we avoid the need altogether with the code below.)
if( thread_am_ochief( t ) )
{
if ( bli_obj_scalar_has_nonzero_imag( p ) )
{
// Detach the scalar.
bli_obj_scalar_detach( p, &kappa );
// Reset the attached scalar (to 1.0).
bli_obj_scalar_reset( p );
kappa_p = κ
}
else
{
// If the internal scalar of A has only a real component, then
// we will apply it later (in the micro-kernel), and so we will
// use BLIS_ONE to indicate no scaling during packing.
kappa_p = &BLIS_ONE;
}
}
kappa_p = thread_obroadcast( t, kappa_p );
// Acquire the buffer to the kappa chosen above.
buf_kappa = bli_obj_buffer_for_1x1( dt_cp, *kappa_p );
}
else // if ( bli_is_nat_packed( schema ) )
{
// This branch if for native execution, where we assume that
// the micro-kernel will always apply the alpha scalar of the
// higher-level operation. Thus, we use BLIS_ONE for kappa so
// that the underlying packm implementation does not perform
// any scaling during packing.
buf_kappa = bli_obj_buffer_for_const( dt_cp, BLIS_ONE );
}
// Choose the correct func_t object based on the pack_t schema.
if ( bli_is_4mi_packed( schema ) ) packm_kers = packm_struc_cxk_4mi_kers;
else if ( bli_is_3mi_packed( schema ) ||
bli_is_3ms_packed( schema ) ) packm_kers = packm_struc_cxk_3mis_kers;
else if ( bli_is_ro_packed( schema ) ||
bli_is_io_packed( schema ) ||
bli_is_rpi_packed( schema ) ) packm_kers = packm_struc_cxk_rih_kers;
else packm_kers = packm_struc_cxk_kers;
// Query the datatype-specific function pointer from the func_t object.
packm_ker = bli_func_obj_query( dt_cp, packm_kers );
// Index into the type combination array to extract the correct
// function pointer.
f = ftypes[dt_cp];
// Invoke the function.
f( strucc,
diagoffc,
diagc,
uploc,
transc,
schema,
invdiag,
revifup,
reviflo,
m_p,
n_p,
m_max_p,
n_max_p,
buf_kappa,
buf_c, rs_c, cs_c,
buf_p, rs_p, cs_p,
is_p,
pd_p, ps_p,
packm_ker,
t );
}
void bli_packm_blk_var1_md
(
obj_t* c,
obj_t* p,
cntx_t* cntx,
cntl_t* cntl,
thrinfo_t* t
)
{
num_t dt_c = bli_obj_dt( c );
num_t dt_p = bli_obj_dt( p );
trans_t transc = bli_obj_conjtrans_status( c );
pack_t schema = bli_obj_pack_schema( p );
dim_t m_p = bli_obj_length( p );
dim_t n_p = bli_obj_width( p );
dim_t m_max_p = bli_obj_padded_length( p );
dim_t n_max_p = bli_obj_padded_width( p );
void* buf_c = bli_obj_buffer_at_off( c );
inc_t rs_c = bli_obj_row_stride( c );
inc_t cs_c = bli_obj_col_stride( c );
void* buf_p = bli_obj_buffer_at_off( p );
inc_t rs_p = bli_obj_row_stride( p );
inc_t cs_p = bli_obj_col_stride( p );
inc_t is_p = bli_obj_imag_stride( p );
dim_t pd_p = bli_obj_panel_dim( p );
inc_t ps_p = bli_obj_panel_stride( p );
obj_t kappa;
void* buf_kappa;
FUNCPTR_T f;
// Treatment of kappa (ie: packing during scaling) depends on
// whether we are executing an induced method.
if ( bli_is_nat_packed( schema ) )
{
// This branch is for native execution, where we assume that
// the micro-kernel will always apply the alpha scalar of the
// higher-level operation. Thus, we use BLIS_ONE for kappa so
// that the underlying packm implementation does not perform
// any scaling during packing.
buf_kappa = bli_obj_buffer_for_const( dt_p, &BLIS_ONE );
}
else // if ( bli_is_ind_packed( schema ) )
{
obj_t* kappa_p;
// The value for kappa we use will depend on whether the scalar
// attached to A has a nonzero imaginary component. If it does,
// then we will apply the scalar during packing to facilitate
// implementing induced complex domain algorithms in terms of
// real domain micro-kernels. (In the aforementioned situation,
// applying a real scalar is easy, but applying a complex one is
// harder, so we avoid the need altogether with the code below.)
if ( bli_obj_scalar_has_nonzero_imag( p ) )
{
// Detach the scalar.
bli_obj_scalar_detach( p, &kappa );
// Reset the attached scalar (to 1.0).
bli_obj_scalar_reset( p );
kappa_p = κ
}
else
{
// If the internal scalar of A has only a real component, then
// we will apply it later (in the micro-kernel), and so we will
// use BLIS_ONE to indicate no scaling during packing.
kappa_p = &BLIS_ONE;
}
// Acquire the buffer to the kappa chosen above.
buf_kappa = bli_obj_buffer_for_1x1( dt_p, kappa_p );
}
// Index into the type combination array to extract the correct
// function pointer.
f = ftypes[dt_c][dt_p];
// Invoke the function.
f(
transc,
schema,
m_p,
n_p,
m_max_p,
n_max_p,
buf_kappa,
buf_c, rs_c, cs_c,
buf_p, rs_p, cs_p,
is_p,
pd_p, ps_p,
cntx,
t );
}
