static int ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind)
{
IDEBus *bus = DO_UPCAST(IDEBus, qbus, dev->qdev.parent_bus);
IDEState *s = bus->ifs + dev->unit;
if (dev->conf.discard_granularity && dev->conf.discard_granularity != 512) {
error_report("discard_granularity must be 512 for ide");
return -1;
}
blkconf_serial(&dev->conf, &dev->serial);
if (blkconf_geometry(&dev->conf, &dev->chs_trans, 65536, 16, 255) < 0) {
return -1;
}
if (ide_init_drive(s, dev->conf.bs, kind,
dev->version, dev->serial, dev->model, dev->wwn,
dev->conf.cyls, dev->conf.heads, dev->conf.secs,
dev->chs_trans) < 0) {
return -1;
}
if (!dev->version) {
dev->version = g_strdup(s->version);
}
if (!dev->serial) {
dev->serial = g_strdup(s->drive_serial_str);
}
add_boot_device_path(dev->conf.bootindex, &dev->qdev,
dev->unit ? "/disk@1" : "/disk@0");
return 0;
}
static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBlock *s = VIRTIO_BLK(dev);
VirtIOBlkConf *blk = &(s->blk);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
Error *err = NULL;
#endif
static int virtio_blk_id;
if (!blk->conf.bs) {
error_setg(errp, "drive property not set");
return;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_setg(errp, "Device needs media, but drive is empty");
return;
}
blkconf_serial(&blk->conf, &blk->serial);
s->original_wce = bdrv_enable_write_cache(blk->conf.bs);
if (blkconf_geometry(&blk->conf, NULL, 65535, 255, 255) < 0) {
error_setg(errp, "Error setting geometry");
return;
}
virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config));
s->bs = blk->conf.bs;
s->conf = &blk->conf;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
s->vq = virtio_add_queue(vdev, 128, virtio_blk_handle_output);
s->complete_request = virtio_blk_complete_request;
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
virtio_blk_data_plane_create(vdev, blk, &s->dataplane, &err);
if (err != NULL) {
error_propagate(errp, err);
virtio_cleanup(vdev);
return;
}
s->migration_state_notifier.notify = virtio_blk_migration_state_changed;
add_migration_state_change_notifier(&s->migration_state_notifier);
#endif
s->change = qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_guest_block_size(s->bs, s->conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, dev, "/disk@0,0");
}
static int virtio_blk_device_init(VirtIODevice *vdev)
{
DeviceState *qdev = DEVICE(vdev);
VirtIOBlock *s = VIRTIO_BLK(vdev);
VirtIOBlkConf *blk = &(s->blk);
static int virtio_blk_id;
if (!blk->conf.bs) {
error_report("drive property not set");
return -1;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_report("Device needs media, but drive is empty");
return -1;
}
blkconf_serial(&blk->conf, &blk->serial);
if (blkconf_geometry(&blk->conf, NULL, 65535, 255, 255) < 0) {
return -1;
}
virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config));
vdev->get_config = virtio_blk_update_config;
vdev->set_config = virtio_blk_set_config;
vdev->get_features = virtio_blk_get_features;
vdev->set_status = virtio_blk_set_status;
vdev->reset = virtio_blk_reset;
s->bs = blk->conf.bs;
s->conf = &blk->conf;
memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf));
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
s->vq = virtio_add_queue(vdev, 128, virtio_blk_handle_output);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
if (!virtio_blk_data_plane_create(vdev, blk, &s->dataplane)) {
virtio_common_cleanup(vdev);
return -1;
}
#endif
s->change = qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
register_savevm(qdev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_buffer_alignment(s->bs, s->conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, qdev, "/disk@0,0");
return 0;
}
static int ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind)
{
IDEBus *bus = DO_UPCAST(IDEBus, qbus, dev->qdev.parent_bus);
IDEState *s = bus->ifs + dev->unit;
Error *err = NULL;
if (dev->conf.discard_granularity == -1) {
dev->conf.discard_granularity = 512;
} else if (dev->conf.discard_granularity &&
dev->conf.discard_granularity != 512) {
error_report("discard_granularity must be 512 for ide");
return -1;
}
blkconf_blocksizes(&dev->conf);
if (dev->conf.logical_block_size != 512) {
error_report("logical_block_size must be 512 for IDE");
return -1;
}
blkconf_serial(&dev->conf, &dev->serial);
if (kind != IDE_CD) {
blkconf_geometry(&dev->conf, &dev->chs_trans, 65535, 16, 255, &err);
if (err) {
error_report_err(err);
return -1;
}
}
blkconf_apply_backend_options(&dev->conf);
if (ide_init_drive(s, dev->conf.blk, kind,
dev->version, dev->serial, dev->model, dev->wwn,
dev->conf.cyls, dev->conf.heads, dev->conf.secs,
dev->chs_trans) < 0) {
return -1;
}
if (!dev->version) {
dev->version = g_strdup(s->version);
}
if (!dev->serial) {
dev->serial = g_strdup(s->drive_serial_str);
}
add_boot_device_path(dev->conf.bootindex, &dev->qdev,
dev->unit ? "/disk@1" : "/disk@0");
return 0;
}
VirtIODevice *virtio_blk_init(DeviceState *dev, VirtIOBlkConf *blk)
{
VirtIOBlock *s;
static int virtio_blk_id;
if (!blk->conf.bs) {
error_report("drive property not set");
return NULL;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_report("Device needs media, but drive is empty");
return NULL;
}
blkconf_serial(&blk->conf, &blk->serial);
if (blkconf_geometry(&blk->conf, NULL, 65535, 255, 255) < 0) {
return NULL;
}
s = (VirtIOBlock *)virtio_common_init("virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config),
sizeof(VirtIOBlock));
s->vdev.get_config = virtio_blk_update_config;
s->vdev.set_config = virtio_blk_set_config;
s->vdev.get_features = virtio_blk_get_features;
s->vdev.set_status = virtio_blk_set_status;
s->vdev.reset = virtio_blk_reset;
s->bs = blk->conf.bs;
s->conf = &blk->conf;
s->blk = blk;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
s->qdev = dev;
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_buffer_alignment(s->bs, s->conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, dev, "/disk@0,0");
return &s->vdev;
}
