static void bma255_set_int_enable(struct i2c_client *client,
unsigned char InterruptType , unsigned char value)
{
unsigned char reg;
bma255_smbus_read_byte(client, BMA255_INT_ENABLE1_REG, ®);
switch (InterruptType) {
case SLOPE_X_INT:
/* Slope X Interrupt */
reg = BMA255_SET_BITSLICE(reg, BMA255_EN_SLOPE_X_INT, value);
break;
case SLOPE_Y_INT:
/* Slope Y Interrupt */
reg = BMA255_SET_BITSLICE(reg, BMA255_EN_SLOPE_Y_INT, value);
break;
case SLOPE_Z_INT:
/* Slope Z Interrupt */
reg = BMA255_SET_BITSLICE(reg, BMA255_EN_SLOPE_Z_INT, value);
break;
default:
break;
}
bma255_smbus_write_byte(client, BMA255_INT_ENABLE1_REG, ®);
}
static int bma255_set_range(struct i2c_client *client, unsigned char range)
{
int ret = 0 ;
unsigned char buf;
ret = bma255_smbus_read_byte(client, BMA255_RANGE_SEL_REG, &buf);
switch (range) {
case BMA255_RANGE_2G:
buf = BMA255_SET_BITSLICE(buf, BMA255_RANGE_SEL, 3);
break;
case BMA255_RANGE_4G:
buf = BMA255_SET_BITSLICE(buf, BMA255_RANGE_SEL, 5);
break;
case BMA255_RANGE_8G:
buf = BMA255_SET_BITSLICE(buf, BMA255_RANGE_SEL, 8);
break;
case BMA255_RANGE_16G:
buf = BMA255_SET_BITSLICE(buf, BMA255_RANGE_SEL, 12);
break;
default:
buf = BMA255_SET_BITSLICE(buf, BMA255_RANGE_SEL, 3);
break;
}
ret += bma255_smbus_write_byte(client, BMA255_RANGE_SEL_REG, &buf);
return ret;
}
static int bma255_set_bandwidth(struct i2c_client *client,
unsigned char bandwidth)
{
int ret = 0;
unsigned char buf;
if (bandwidth <= 7 || bandwidth >= 16)
bandwidth = BMA255_BW_1000HZ;
ret = bma255_smbus_read_byte(client, BMA255_BANDWIDTH__REG, &buf);
buf = BMA255_SET_BITSLICE(buf, BMA255_BANDWIDTH, bandwidth);
ret += bma255_smbus_write_byte(client, BMA255_BANDWIDTH__REG, &buf);
return ret;
}
static void bma255_slope_enable(struct i2c_client *client,
int enable, int factory_mode)
{
unsigned char reg;
if (enable == ON) {
bma255_smbus_read_byte(client,
BMA255_EN_INT1_PAD_SLOPE__REG, ®);
reg = BMA255_SET_BITSLICE(reg, BMA255_EN_INT1_PAD_SLOPE, ON);
bma255_smbus_write_byte(client,
BMA255_EN_INT1_PAD_SLOPE__REG, ®);
bma255_smbus_read_byte(client, BMA255_INT_MODE_SEL__REG, ®);
reg = BMA255_SET_BITSLICE(reg, BMA255_INT_MODE_SEL, 0x01);
bma255_smbus_write_byte(client, BMA255_INT_MODE_SEL__REG, ®);
bma255_smbus_read_byte(client, BMA255_SLOPE_DUR__REG, ®);
reg = BMA255_SET_BITSLICE(reg, BMA255_SLOPE_DUR,
SLOPE_DURATION_VALUE);
bma255_smbus_write_byte(client, BMA255_SLOPE_DUR__REG, ®);
if (factory_mode == OFF) {
reg = SLOPE_THRESHOLD_VALUE;
bma255_smbus_write_byte(client,
BMA255_SLOPE_THRES__REG, ®);
bma255_set_int_enable(client, SLOPE_X_INT, ON);
bma255_set_int_enable(client, SLOPE_Y_INT, ON);
bma255_set_int_enable(client, SLOPE_Z_INT, ON);
} else {
reg = 0x00;
bma255_smbus_write_byte(client,
BMA255_SLOPE_THRES__REG, ®);
bma255_set_int_enable(client, SLOPE_Z_INT, ON);
}
bma255_set_bandwidth(client, BMA255_BW_7_81HZ);
} else if (enable == OFF) {
bma255_smbus_read_byte(client,
BMA255_EN_INT1_PAD_SLOPE__REG, ®);
reg = BMA255_SET_BITSLICE(reg, BMA255_EN_INT1_PAD_SLOPE, OFF);
bma255_smbus_write_byte(client,
BMA255_EN_INT1_PAD_SLOPE__REG, ®);
bma255_set_int_enable(client, SLOPE_X_INT, OFF);
bma255_set_int_enable(client, SLOPE_Y_INT, OFF);
bma255_set_int_enable(client, SLOPE_Z_INT, OFF);
bma255_set_bandwidth(client, BMA255_BW_125HZ);
}
}
static int bma255_set_mode(struct bma255_p *data, unsigned char mode)
{
int ret = 0;
unsigned char buf1, buf2;
struct i2c_client *client = data->client;
mutex_lock(&data->mode_mutex);
ret = bma255_smbus_read_byte(client, BMA255_MODE_CTRL_REG, &buf1);
ret += bma255_smbus_read_byte(client, BMA255_LOW_NOISE_CTRL_REG, &buf2);
switch (mode) {
case BMA255_MODE_NORMAL:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 0);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 0);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_LOWPOWER1:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 2);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 0);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_SUSPEND:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 4);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 0);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
break;
case BMA255_MODE_DEEP_SUSPEND:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 1);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_LOWPOWER2:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 2);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_STANDBY:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 4);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
break;
default:
ret = -EINVAL;
break;
}
pr_info("[SENSOR]: %s - change mode %u\n", __func__, mode);
mutex_unlock(&data->mode_mutex);
return ret;
}
static int bma255_set_mode(struct i2c_client *client, unsigned char mode)
{
int ret = 0;
unsigned char buf1, buf2, buf3;
ret = bma255_smbus_read_byte(client, BMA255_MODE_CTRL_REG, &buf1);
ret += bma255_smbus_read_byte(client, BMA255_LOW_NOISE_CTRL_REG, &buf2);
ret += bma255_smbus_read_byte(client, BMA255_BW_SEL_REG, &buf3);
switch (mode) {
case BMA255_MODE_NORMAL:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 0);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 0);
buf3 = BMA255_SET_BITSLICE(buf3, BMA255_BANDWIDTH, 3);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_BW_SEL_REG, &buf3);
break;
case BMA255_MODE_LOWPOWER1:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 2);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 0);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_SUSPEND:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 4);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 0);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
break;
case BMA255_MODE_DEEP_SUSPEND:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 1);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_LOWPOWER2:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 2);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
break;
case BMA255_MODE_STANDBY:
buf1 = BMA255_SET_BITSLICE(buf1, BMA255_MODE_CTRL, 4);
buf2 = BMA255_SET_BITSLICE(buf2, BMA255_LOW_POWER_MODE, 1);
ret += bma255_smbus_write_byte(client,
BMA255_LOW_NOISE_CTRL_REG, &buf2);
mdelay(1);
ret += bma255_smbus_write_byte(client,
BMA255_MODE_CTRL_REG, &buf1);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
