/* Points setup - several simplifications as all attributes are
* constant across the face of the point (point sprites excluded!)
*/
void brw_emit_point_setup(struct brw_sf_compile *c, bool allocate)
{
struct brw_compile *p = &c->func;
GLuint i;
c->flag_value = 0xff;
c->nr_verts = 1;
if (allocate)
alloc_regs(c);
copy_z_inv_w(c);
brw_MOV(p, c->m1Cx, brw_imm_ud(0)); /* zero - move out of loop */
brw_MOV(p, c->m2Cy, brw_imm_ud(0)); /* zero - move out of loop */
for (i = 0; i < c->nr_setup_regs; i++)
{
struct brw_reg a0 = offset(c->vert[0], i);
GLushort pc, pc_persp, pc_linear;
bool last = calculate_masks(c, i, &pc, &pc_persp, &pc_linear);
if (pc_persp)
{
/* This seems odd as the values are all constant, but the
* fragment shader will be expecting it:
*/
set_predicate_control_flag_value(p, c, pc_persp);
brw_MUL(p, a0, a0, c->inv_w[0]);
}
/* The delta values are always zero, just send the starting
* coordinate. Again, this is to fit in with the interpolation
* code in the fragment shader.
*/
{
set_predicate_control_flag_value(p, c, pc);
brw_MOV(p, c->m3C0, a0); /* constant value */
/* Copy m0..m3 to URB.
*/
brw_urb_WRITE(p,
brw_null_reg(),
0,
brw_vec8_grf(0, 0),
last ? BRW_URB_WRITE_EOT_COMPLETE
: BRW_URB_WRITE_NO_FLAGS,
4, /* msg len */
0, /* response len */
i*4, /* urb destination offset */
BRW_URB_SWIZZLE_TRANSPOSE);
}
}
brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
}
void brw_clip_emit_vue(struct brw_clip_compile *c,
struct brw_indirect vert,
GLboolean allocate,
GLboolean eot,
GLuint header)
{
struct brw_compile *p = &c->func;
GLuint start = c->last_mrf;
brw_clip_ff_sync(c);
assert(!(allocate && eot));
/* Cycle through mrf regs - probably futile as we have to wait for
* the allocation response anyway. Also, the order this function
* is invoked doesn't correspond to the order the instructions will
* be executed, so it won't have any effect in many cases.
*/
#if 0
if (start + c->nr_regs + 1 >= MAX_MRF)
start = 0;
c->last_mrf = start + c->nr_regs + 1;
#endif
/* Copy the vertex from vertn into m1..mN+1:
*/
brw_copy_from_indirect(p, brw_message_reg(start+1), vert, c->nr_regs);
/* Overwrite PrimType and PrimStart in the message header, for
* each vertex in turn:
*/
brw_MOV(p, get_element_ud(c->reg.R0, 2), brw_imm_ud(header));
/* Send each vertex as a seperate write to the urb. This
* is different to the concept in brw_sf_emit.c, where
* subsequent writes are used to build up a single urb
* entry. Each of these writes instantiates a seperate
* urb entry - (I think... what about 'allocate'?)
*/
brw_urb_WRITE(p,
allocate ? c->reg.R0 : retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
start,
c->reg.R0,
allocate,
1, /* used */
c->nr_regs + 1, /* msg length */
allocate ? 1 : 0, /* response_length */
eot, /* eot */
1, /* writes_complete */
0, /* urb offset */
BRW_URB_SWIZZLE_NONE);
}
void
vec4_generator::generate_vs_urb_write(vec4_instruction *inst)
{
brw_urb_WRITE(p,
brw_null_reg(), /* dest */
inst->base_mrf, /* starting mrf reg nr */
brw_vec8_grf(0, 0), /* src */
inst->urb_write_flags,
inst->mlen,
0, /* response len */
inst->offset, /* urb destination offset */
BRW_URB_SWIZZLE_INTERLEAVE);
}
void
vec4_generator::generate_gs_thread_end(vec4_instruction *inst)
{
struct brw_reg src = brw_message_reg(inst->base_mrf);
brw_urb_WRITE(p,
brw_null_reg(), /* dest */
inst->base_mrf, /* starting mrf reg nr */
src,
BRW_URB_WRITE_EOT,
1, /* message len */
0, /* response len */
0, /* urb destination offset */
BRW_URB_SWIZZLE_INTERLEAVE);
}
void
vec4_generator::generate_gs_urb_write(vec4_instruction *inst)
{
struct brw_reg src = brw_message_reg(inst->base_mrf);
brw_urb_WRITE(p,
brw_null_reg(), /* dest */
inst->base_mrf, /* starting mrf reg nr */
src,
inst->urb_write_flags,
inst->mlen,
0, /* response len */
inst->offset, /* urb destination offset */
BRW_URB_SWIZZLE_INTERLEAVE);
}
/**
* Emit a vertex using the URB_WRITE message. Use the contents of
* c->reg.header for the message header, and the registers starting at \c vert
* for the vertex data.
*
* If \c last is true, then this is the last vertex, so no further URB space
* should be allocated, and this message should end the thread.
*
* If \c last is false, then a new URB entry will be allocated, and its handle
* will be stored in DWORD 0 of c->reg.header for use in the next URB_WRITE
* message.
*/
static void brw_ff_gs_emit_vue(struct brw_ff_gs_compile *c,
struct brw_reg vert,
bool last)
{
struct brw_codegen *p = &c->func;
int write_offset = 0;
bool complete = false;
do {
/* We can't write more than 14 registers at a time to the URB */
int write_len = MIN2(c->nr_regs - write_offset, 14);
if (write_len == c->nr_regs - write_offset)
complete = true;
/* Copy the vertex from vertn into m1..mN+1:
*/
brw_copy8(p, brw_message_reg(1), offset(vert, write_offset), write_len);
/* Send the vertex data to the URB. If this is the last write for this
* vertex, then we mark it as complete, and either end the thread or
* allocate another vertex URB entry (depending whether this is the last
* vertex).
*/
enum brw_urb_write_flags flags;
if (!complete)
flags = BRW_URB_WRITE_NO_FLAGS;
else if (last)
flags = BRW_URB_WRITE_EOT_COMPLETE;
else
flags = BRW_URB_WRITE_ALLOCATE_COMPLETE;
brw_urb_WRITE(p,
(flags & BRW_URB_WRITE_ALLOCATE) ? c->reg.temp
: retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
c->reg.header,
flags,
write_len + 1, /* msg length */
(flags & BRW_URB_WRITE_ALLOCATE) ? 1
: 0, /* response length */
write_offset, /* urb offset */
BRW_URB_SWIZZLE_NONE);
write_offset += write_len;
} while (!complete);
if (!last) {
brw_MOV(p, get_element_ud(c->reg.header, 0),
get_element_ud(c->reg.temp, 0));
}
}
static void brw_gs_emit_vue(struct brw_gs_compile *c,
struct brw_reg vert,
GLboolean last,
GLuint header)
{
struct brw_compile *p = &c->func;
struct intel_context *intel = &c->func.brw->intel;
GLboolean allocate = !last;
struct brw_reg temp;
if (intel->gen < 6)
temp = c->reg.R0;
else {
temp = c->reg.temp;
brw_MOV(p, retype(temp, BRW_REGISTER_TYPE_UD),
retype(c->reg.R0, BRW_REGISTER_TYPE_UD));
}
/* Overwrite PrimType and PrimStart in the message header, for
* each vertex in turn:
*/
brw_MOV(p, get_element_ud(temp, 2), brw_imm_ud(header));
/* Copy the vertex from vertn into m1..mN+1:
*/
brw_copy8(p, brw_message_reg(1), vert, c->nr_regs);
/* Send each vertex as a seperate write to the urb. This is
* different to the concept in brw_sf_emit.c, where subsequent
* writes are used to build up a single urb entry. Each of these
* writes instantiates a seperate urb entry, and a new one must be
* allocated each time.
*/
brw_urb_WRITE(p,
allocate ? temp : retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
temp,
allocate,
1, /* used */
c->nr_regs + 1, /* msg length */
allocate ? 1 : 0, /* response length */
allocate ? 0 : 1, /* eot */
1, /* writes_complete */
0, /* urb offset */
BRW_URB_SWIZZLE_NONE);
if (intel->gen >= 6 && allocate)
brw_MOV(p, get_element_ud(c->reg.R0, 0), get_element_ud(temp, 0));
}
void
vec4_generator::generate_urb_write(vec4_instruction *inst)
{
brw_urb_WRITE(p,
brw_null_reg(), /* dest */
inst->base_mrf, /* starting mrf reg nr */
brw_vec8_grf(0, 0), /* src */
false, /* allocate */
true, /* used */
inst->mlen,
0, /* response len */
inst->eot, /* eot */
inst->eot, /* writes complete */
inst->offset, /* urb destination offset */
BRW_URB_SWIZZLE_INTERLEAVE);
}
/**
* De-allocate the URB entry that was previously allocated to this thread
* (without writing any vertex data to it), and terminate the thread. This is
* used to implement RASTERIZER_DISCARD functionality.
*/
static void brw_gs_terminate(struct brw_gs_compile *c)
{
struct brw_compile *p = &c->func;
brw_urb_WRITE(p,
retype(brw_null_reg(), BRW_REGISTER_TYPE_UD), /* dest */
0, /* msg_reg_nr */
c->reg.header, /* src0 */
false, /* allocate */
false, /* used */
1, /* msg_length */
0, /* response_length */
true, /* eot */
true, /* writes_complete */
0, /* offset */
BRW_URB_SWIZZLE_NONE);
}
void brw_clip_kill_thread(struct brw_clip_compile *c)
{
struct brw_codegen *p = &c->func;
brw_clip_ff_sync(c);
/* Send an empty message to kill the thread and release any
* allocated urb entry:
*/
brw_urb_WRITE(p,
retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
c->reg.R0,
BRW_URB_WRITE_UNUSED | BRW_URB_WRITE_EOT_COMPLETE,
1, /* msg len */
0, /* response len */
0,
BRW_URB_SWIZZLE_NONE);
}
void brw_clip_kill_thread(struct brw_clip_compile *c)
{
struct brw_compile *p = &c->func;
/* Send an empty message to kill the thread and release any
* allocated urb entry:
*/
brw_urb_WRITE(p,
retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
c->reg.R0,
0, /* allocate */
0, /* used */
1, /* msg len */
0, /* response len */
1, /* eot */
1, /* writes complete */
0,
BRW_URB_SWIZZLE_NONE);
}
void brw_clip_emit_vue(struct brw_clip_compile *c,
struct brw_indirect vert,
enum brw_urb_write_flags flags,
GLuint header)
{
struct brw_codegen *p = &c->func;
bool allocate = flags & BRW_URB_WRITE_ALLOCATE;
brw_clip_ff_sync(c);
/* Any URB entry that is allocated must subsequently be used or discarded,
* so it doesn't make sense to mark EOT and ALLOCATE at the same time.
*/
assert(!(allocate && (flags & BRW_URB_WRITE_EOT)));
/* Copy the vertex from vertn into m1..mN+1:
*/
brw_copy_from_indirect(p, brw_message_reg(1), vert, c->nr_regs);
/* Overwrite PrimType and PrimStart in the message header, for
* each vertex in turn:
*/
brw_MOV(p, get_element_ud(c->reg.R0, 2), brw_imm_ud(header));
/* Send each vertex as a separate write to the urb. This
* is different to the concept in brw_sf_emit.c, where
* subsequent writes are used to build up a single urb
* entry. Each of these writes instantiates a separate
* urb entry - (I think... what about 'allocate'?)
*/
brw_urb_WRITE(p,
allocate ? c->reg.R0 : retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
c->reg.R0,
flags,
c->nr_regs + 1, /* msg length */
allocate ? 1 : 0, /* response_length */
0, /* urb offset */
BRW_URB_SWIZZLE_NONE);
}
void brw_clip_emit_vue(struct brw_clip_compile *c,
struct brw_indirect vert,
bool allocate,
bool eot,
GLuint header)
{
struct brw_compile *p = &c->func;
brw_clip_ff_sync(c);
assert(!(allocate && eot));
/* Copy the vertex from vertn into m1..mN+1:
*/
brw_copy_from_indirect(p, brw_message_reg(1), vert, c->nr_regs);
/* Overwrite PrimType and PrimStart in the message header, for
* each vertex in turn:
*/
brw_MOV(p, get_element_ud(c->reg.R0, 2), brw_imm_ud(header));
/* Send each vertex as a seperate write to the urb. This
* is different to the concept in brw_sf_emit.c, where
* subsequent writes are used to build up a single urb
* entry. Each of these writes instantiates a seperate
* urb entry - (I think... what about 'allocate'?)
*/
brw_urb_WRITE(p,
allocate ? c->reg.R0 : retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
c->reg.R0,
allocate,
1, /* used */
c->nr_regs + 1, /* msg length */
allocate ? 1 : 0, /* response_length */
eot, /* eot */
1, /* writes_complete */
0, /* urb offset */
BRW_URB_SWIZZLE_NONE);
}
/**
* Emit a vertex using the URB_WRITE message. Use the contents of
* c->reg.header for the message header, and the registers starting at \c vert
* for the vertex data.
*
* If \c last is true, then this is the last vertex, so no further URB space
* should be allocated, and this message should end the thread.
*
* If \c last is false, then a new URB entry will be allocated, and its handle
* will be stored in DWORD 0 of c->reg.header for use in the next URB_WRITE
* message.
*/
static void brw_gs_emit_vue(struct brw_gs_compile *c,
struct brw_reg vert,
bool last)
{
struct brw_compile *p = &c->func;
bool allocate = !last;
/* Copy the vertex from vertn into m1..mN+1:
*/
brw_copy8(p, brw_message_reg(1), vert, c->nr_regs);
/* Send each vertex as a seperate write to the urb. This is
* different to the concept in brw_sf_emit.c, where subsequent
* writes are used to build up a single urb entry. Each of these
* writes instantiates a seperate urb entry, and a new one must be
* allocated each time.
*/
brw_urb_WRITE(p,
allocate ? c->reg.temp
: retype(brw_null_reg(), BRW_REGISTER_TYPE_UD),
0,
c->reg.header,
allocate,
1, /* used */
c->nr_regs + 1, /* msg length */
allocate ? 1 : 0, /* response length */
allocate ? 0 : 1, /* eot */
1, /* writes_complete */
0, /* urb offset */
BRW_URB_SWIZZLE_NONE);
if (allocate) {
brw_MOV(p, get_element_ud(c->reg.header, 0),
get_element_ud(c->reg.temp, 0));
}
}
void brw_emit_point_sprite_setup( struct brw_sf_compile *c, GLboolean allocate)
{
struct brw_compile *p = &c->func;
GLuint i;
c->nr_verts = 1;
if (allocate)
alloc_regs(c);
copy_z_inv_w(c);
for (i = 0; i < c->nr_setup_regs; i++)
{
struct brw_sf_point_tex *tex = &c->point_attrs[c->idx_to_attr[2*i]];
struct brw_reg a0 = offset(c->vert[0], i);
GLushort pc, pc_persp, pc_linear;
GLboolean last = calculate_masks(c, i, &pc, &pc_persp, &pc_linear);
if (pc_persp)
{
if (!tex->CoordReplace) {
brw_set_predicate_control_flag_value(p, pc_persp);
brw_MUL(p, a0, a0, c->inv_w[0]);
}
}
if (tex->CoordReplace) {
/* Caculate 1.0/PointWidth */
brw_math(&c->func,
c->tmp,
BRW_MATH_FUNCTION_INV,
BRW_MATH_SATURATE_NONE,
0,
c->dx0,
BRW_MATH_DATA_SCALAR,
BRW_MATH_PRECISION_FULL);
if (c->key.SpriteOrigin == GL_LOWER_LEFT) {
brw_MUL(p, c->m1Cx, c->tmp, c->inv_w[0]);
brw_MOV(p, vec1(suboffset(c->m1Cx, 1)), brw_imm_f(0.0));
brw_MUL(p, c->m2Cy, c->tmp, negate(c->inv_w[0]));
brw_MOV(p, vec1(suboffset(c->m2Cy, 0)), brw_imm_f(0.0));
} else {
brw_MUL(p, c->m1Cx, c->tmp, c->inv_w[0]);
brw_MOV(p, vec1(suboffset(c->m1Cx, 1)), brw_imm_f(0.0));
brw_MUL(p, c->m2Cy, c->tmp, c->inv_w[0]);
brw_MOV(p, vec1(suboffset(c->m2Cy, 0)), brw_imm_f(0.0));
}
} else {
brw_MOV(p, c->m1Cx, brw_imm_ud(0));
brw_MOV(p, c->m2Cy, brw_imm_ud(0));
}
{
brw_set_predicate_control_flag_value(p, pc);
if (tex->CoordReplace) {
if (c->key.SpriteOrigin == GL_LOWER_LEFT) {
brw_MUL(p, c->m3C0, c->inv_w[0], brw_imm_f(1.0));
brw_MOV(p, vec1(suboffset(c->m3C0, 0)), brw_imm_f(0.0));
}
else
brw_MOV(p, c->m3C0, brw_imm_f(0.0));
} else {
brw_MOV(p, c->m3C0, a0); /* constant value */
}
/* Copy m0..m3 to URB.
*/
brw_urb_WRITE(p,
brw_null_reg(),
0,
brw_vec8_grf(0, 0),
0, /* allocate */
1, /* used */
4, /* msg len */
0, /* response len */
last, /* eot */
last, /* writes complete */
i*4, /* urb destination offset */
BRW_URB_SWIZZLE_TRANSPOSE);
}
}
}
void brw_emit_point_sprite_setup(struct brw_sf_compile *c, bool allocate)
{
struct brw_compile *p = &c->func;
GLuint i;
c->flag_value = 0xff;
c->nr_verts = 1;
if (allocate)
alloc_regs(c);
copy_z_inv_w(c);
for (i = 0; i < c->nr_setup_regs; i++)
{
struct brw_reg a0 = offset(c->vert[0], i);
GLushort pc, pc_persp, pc_linear, pc_coord_replace;
bool last = calculate_masks(c, i, &pc, &pc_persp, &pc_linear);
pc_coord_replace = calculate_point_sprite_mask(c, i);
pc_persp &= ~pc_coord_replace;
if (pc_persp) {
set_predicate_control_flag_value(p, c, pc_persp);
brw_MUL(p, a0, a0, c->inv_w[0]);
}
/* Point sprite coordinate replacement: A texcoord with this
* enabled gets replaced with the value (x, y, 0, 1) where x and
* y vary from 0 to 1 across the horizontal and vertical of the
* point.
*/
if (pc_coord_replace) {
set_predicate_control_flag_value(p, c, pc_coord_replace);
/* Caculate 1.0/PointWidth */
gen4_math(&c->func,
c->tmp,
BRW_MATH_FUNCTION_INV,
0,
c->dx0,
BRW_MATH_DATA_SCALAR,
BRW_MATH_PRECISION_FULL);
brw_set_default_access_mode(p, BRW_ALIGN_16);
/* dA/dx, dA/dy */
brw_MOV(p, c->m1Cx, brw_imm_f(0.0));
brw_MOV(p, c->m2Cy, brw_imm_f(0.0));
brw_MOV(p, brw_writemask(c->m1Cx, WRITEMASK_X), c->tmp);
if (c->key.sprite_origin_lower_left) {
brw_MOV(p, brw_writemask(c->m2Cy, WRITEMASK_Y), negate(c->tmp));
} else {
brw_MOV(p, brw_writemask(c->m2Cy, WRITEMASK_Y), c->tmp);
}
/* attribute constant offset */
brw_MOV(p, c->m3C0, brw_imm_f(0.0));
if (c->key.sprite_origin_lower_left) {
brw_MOV(p, brw_writemask(c->m3C0, WRITEMASK_YW), brw_imm_f(1.0));
} else {
brw_MOV(p, brw_writemask(c->m3C0, WRITEMASK_W), brw_imm_f(1.0));
}
brw_set_default_access_mode(p, BRW_ALIGN_1);
}
if (pc & ~pc_coord_replace) {
set_predicate_control_flag_value(p, c, pc & ~pc_coord_replace);
brw_MOV(p, c->m1Cx, brw_imm_ud(0));
brw_MOV(p, c->m2Cy, brw_imm_ud(0));
brw_MOV(p, c->m3C0, a0); /* constant value */
}
set_predicate_control_flag_value(p, c, pc);
/* Copy m0..m3 to URB. */
brw_urb_WRITE(p,
brw_null_reg(),
0,
brw_vec8_grf(0, 0),
last ? BRW_URB_WRITE_EOT_COMPLETE
: BRW_URB_WRITE_NO_FLAGS,
4, /* msg len */
0, /* response len */
i*4, /* urb destination offset */
BRW_URB_SWIZZLE_TRANSPOSE);
}
brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
}
void brw_emit_line_setup(struct brw_sf_compile *c, bool allocate)
{
struct brw_compile *p = &c->func;
GLuint i;
c->flag_value = 0xff;
c->nr_verts = 2;
if (allocate)
alloc_regs(c);
invert_det(c);
copy_z_inv_w(c);
if (c->has_flat_shading)
do_flatshade_line(c);
for (i = 0; i < c->nr_setup_regs; i++)
{
/* Pair of incoming attributes:
*/
struct brw_reg a0 = offset(c->vert[0], i);
struct brw_reg a1 = offset(c->vert[1], i);
GLushort pc, pc_persp, pc_linear;
bool last = calculate_masks(c, i, &pc, &pc_persp, &pc_linear);
if (pc_persp)
{
set_predicate_control_flag_value(p, c, pc_persp);
brw_MUL(p, a0, a0, c->inv_w[0]);
brw_MUL(p, a1, a1, c->inv_w[1]);
}
/* Calculate coefficients for position, color:
*/
if (pc_linear) {
set_predicate_control_flag_value(p, c, pc_linear);
brw_ADD(p, c->a1_sub_a0, a1, negate(a0));
brw_MUL(p, c->tmp, c->a1_sub_a0, c->dx0);
brw_MUL(p, c->m1Cx, c->tmp, c->inv_det);
brw_MUL(p, c->tmp, c->a1_sub_a0, c->dy0);
brw_MUL(p, c->m2Cy, c->tmp, c->inv_det);
}
{
set_predicate_control_flag_value(p, c, pc);
/* start point for interpolation
*/
brw_MOV(p, c->m3C0, a0);
/* Copy m0..m3 to URB.
*/
brw_urb_WRITE(p,
brw_null_reg(),
0,
brw_vec8_grf(0, 0),
last ? BRW_URB_WRITE_EOT_COMPLETE
: BRW_URB_WRITE_NO_FLAGS,
4, /* msg len */
0, /* response len */
i*4, /* urb destination offset */
BRW_URB_SWIZZLE_TRANSPOSE);
}
}
brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
}
void brw_emit_tri_setup(struct brw_sf_compile *c, bool allocate)
{
struct brw_compile *p = &c->func;
GLuint i;
c->flag_value = 0xff;
c->nr_verts = 3;
if (allocate)
alloc_regs(c);
invert_det(c);
copy_z_inv_w(c);
if (c->key.do_twoside_color)
do_twoside_color(c);
if (c->has_flat_shading)
do_flatshade_triangle(c);
for (i = 0; i < c->nr_setup_regs; i++)
{
/* Pair of incoming attributes:
*/
struct brw_reg a0 = offset(c->vert[0], i);
struct brw_reg a1 = offset(c->vert[1], i);
struct brw_reg a2 = offset(c->vert[2], i);
GLushort pc, pc_persp, pc_linear;
bool last = calculate_masks(c, i, &pc, &pc_persp, &pc_linear);
if (pc_persp)
{
set_predicate_control_flag_value(p, c, pc_persp);
brw_MUL(p, a0, a0, c->inv_w[0]);
brw_MUL(p, a1, a1, c->inv_w[1]);
brw_MUL(p, a2, a2, c->inv_w[2]);
}
/* Calculate coefficients for interpolated values:
*/
if (pc_linear)
{
set_predicate_control_flag_value(p, c, pc_linear);
brw_ADD(p, c->a1_sub_a0, a1, negate(a0));
brw_ADD(p, c->a2_sub_a0, a2, negate(a0));
/* calculate dA/dx
*/
brw_MUL(p, brw_null_reg(), c->a1_sub_a0, c->dy2);
brw_MAC(p, c->tmp, c->a2_sub_a0, negate(c->dy0));
brw_MUL(p, c->m1Cx, c->tmp, c->inv_det);
/* calculate dA/dy
*/
brw_MUL(p, brw_null_reg(), c->a2_sub_a0, c->dx0);
brw_MAC(p, c->tmp, c->a1_sub_a0, negate(c->dx2));
brw_MUL(p, c->m2Cy, c->tmp, c->inv_det);
}
{
set_predicate_control_flag_value(p, c, pc);
/* start point for interpolation
*/
brw_MOV(p, c->m3C0, a0);
/* Copy m0..m3 to URB. m0 is implicitly copied from r0 in
* the send instruction:
*/
brw_urb_WRITE(p,
brw_null_reg(),
0,
brw_vec8_grf(0, 0), /* r0, will be copied to m0 */
last ? BRW_URB_WRITE_EOT_COMPLETE
: BRW_URB_WRITE_NO_FLAGS,
4, /* msg len */
0, /* response len */
i*4, /* offset */
BRW_URB_SWIZZLE_TRANSPOSE); /* XXX: Swizzle control "SF to windower" */
}
}
brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
}
