/* check the PQStatus and try to 'select 1' to confirm good connection */
bool
is_pgup(PGconn *conn, int timeout)
{
char sqlquery[QUERY_STR_LEN];
/* Check the connection status twice in case it changes after reset */
bool twice = false;
/* Check the connection status twice in case it changes after reset */
for (;;)
{
if (PQstatus(conn) != CONNECTION_OK)
{
if (twice)
return false;
PQreset(conn); /* reconnect */
twice = true;
}
else
{
/*
* Send a SELECT 1 just to check if the connection is OK
*/
if (!cancel_query(conn, timeout))
goto failed;
if (wait_connection_availability(conn, timeout) != 1)
goto failed;
sqlquery_snprintf(sqlquery, "SELECT 1");
if (PQsendQuery(conn, sqlquery) == 0)
{
log_warning(_("PQsendQuery: Query could not be sent to primary. %s\n"),
PQerrorMessage(conn));
goto failed;
}
if (wait_connection_availability(conn, timeout) != 1)
goto failed;
break;
failed:
/*
* we need to retry, because we might just have lost the
* connection once
*/
if (twice)
return false;
PQreset(conn); /* reconnect */
twice = true;
}
}
return true;
}
static void
close_connections()
{
if (primary_conn != NULL && PQisBusy(primary_conn) == 1)
cancel_query(primary_conn, local_options.master_response_timeout);
if (my_local_conn != NULL)
PQfinish(my_local_conn);
if (primary_conn != NULL && primary_conn != my_local_conn)
PQfinish(primary_conn);
primary_conn = NULL;
my_local_conn = NULL;
}
/*
* Insert monitor info, this is basically the time and xlog replayed,
* applied on standby and current xlog location in primary.
* Also do the math to see how far are we in bytes for being uptodate
*/
static void
standby_monitor(void)
{
PGresult *res;
char monitor_standby_timestamp[MAXLEN];
char last_wal_primary_location[MAXLEN];
char last_wal_standby_received[MAXLEN];
char last_wal_standby_applied[MAXLEN];
char last_wal_standby_applied_timestamp[MAXLEN];
char sqlquery[QUERY_STR_LEN];
unsigned long long int lsn_primary;
unsigned long long int lsn_standby_received;
unsigned long long int lsn_standby_applied;
int connection_retries,
ret;
bool did_retry = false;
/*
* Check if the master is still available, if after 5 minutes of retries
* we cannot reconnect, try to get a new master.
*/
check_connection(primary_conn, "master"); /* this take up to
* local_options.reconnect_atte
* mpts *
* local_options.reconnect_intv
* l seconds */
if (!check_connection(my_local_conn, "standby"))
{
log_err("Failed to connect to local node, exiting!\n");
terminate(1);
}
if (PQstatus(primary_conn) != CONNECTION_OK)
{
PQfinish(primary_conn);
primary_conn = NULL;
if (local_options.failover == MANUAL_FAILOVER)
{
log_err(_("We couldn't reconnect to master. Now checking if another node has been promoted.\n"));
for (connection_retries = 0; connection_retries < 6; connection_retries++)
{
primary_conn = get_master_connection(my_local_conn, repmgr_schema,
local_options.cluster_name, &primary_options.node, NULL);
if (PQstatus(primary_conn) == CONNECTION_OK)
{
/*
* Connected, we can continue the process so break the
* loop
*/
log_err(_("Connected to node %d, continue monitoring.\n"),
primary_options.node);
break;
}
else
{
log_err(_("We haven't found a new master, waiting before retry...\n"));
/*
* wait local_options.retry_promote_interval_secs minutes
* before retries, after 6 failures (6 *
* local_options.monitor_interval_secs seconds) we stop
* trying
*/
sleep(local_options.retry_promote_interval_secs);
}
}
if (PQstatus(primary_conn) != CONNECTION_OK)
{
log_err(_("We couldn't reconnect for long enough, exiting...\n"));
terminate(ERR_DB_CON);
}
}
else if (local_options.failover == AUTOMATIC_FAILOVER)
{
/*
* When we returns from this function we will have a new primary
* and a new primary_conn
*/
do_failover();
return;
}
}
/* Check if we still are a standby, we could have been promoted */
do
{
ret = is_standby(my_local_conn);
switch (ret)
{
case 0:
log_err(_("It seems like we have been promoted, so exit from monitoring...\n"));
terminate(1);
break;
case -1:
log_err(_("Standby node disappeared, trying to reconnect...\n"));
did_retry = true;
if (!check_connection(my_local_conn, "standby"))
{
terminate(0);
}
break;
}
} while (ret == -1);
if (did_retry)
{
log_info(_("standby connection got back up again!\n"));
}
/* Fast path for the case where no history is requested */
if (!monitoring_history)
return;
/*
* Cancel any query that is still being executed, so i can insert the
* current record
*/
if (!cancel_query(primary_conn, local_options.master_response_timeout))
return;
if (wait_connection_availability(primary_conn, local_options.master_response_timeout) != 1)
return;
/* Get local xlog info */
sqlquery_snprintf(
sqlquery,
"SELECT CURRENT_TIMESTAMP, pg_last_xlog_receive_location(), "
"pg_last_xlog_replay_location(), pg_last_xact_replay_timestamp()");
res = PQexec(my_local_conn, sqlquery);
if (PQresultStatus(res) != PGRES_TUPLES_OK)
{
log_err(_("PQexec failed: %s\n"), PQerrorMessage(my_local_conn));
PQclear(res);
/* if there is any error just let it be and retry in next loop */
return;
}
strncpy(monitor_standby_timestamp, PQgetvalue(res, 0, 0), MAXLEN);
strncpy(last_wal_standby_received, PQgetvalue(res, 0, 1), MAXLEN);
strncpy(last_wal_standby_applied, PQgetvalue(res, 0, 2), MAXLEN);
strncpy(last_wal_standby_applied_timestamp, PQgetvalue(res, 0, 3), MAXLEN);
PQclear(res);
/* Get primary xlog info */
sqlquery_snprintf(sqlquery, "SELECT pg_current_xlog_location() ");
res = PQexec(primary_conn, sqlquery);
if (PQresultStatus(res) != PGRES_TUPLES_OK)
{
log_err(_("PQexec failed: %s\n"), PQerrorMessage(primary_conn));
PQclear(res);
return;
}
strncpy(last_wal_primary_location, PQgetvalue(res, 0, 0), MAXLEN);
PQclear(res);
/* Calculate the lag */
lsn_primary = wal_location_to_bytes(last_wal_primary_location);
lsn_standby_received = wal_location_to_bytes(last_wal_standby_received);
lsn_standby_applied = wal_location_to_bytes(last_wal_standby_applied);
/*
* Build the SQL to execute on primary
*/
sqlquery_snprintf(sqlquery,
"INSERT INTO %s.repl_monitor "
"VALUES(%d, %d, '%s'::timestamp with time zone, "
" '%s'::timestamp with time zone, '%s', '%s', "
" %lld, %lld)", repmgr_schema,
primary_options.node, local_options.node, monitor_standby_timestamp,
last_wal_standby_applied_timestamp,
last_wal_primary_location,
last_wal_standby_received,
(lsn_primary - lsn_standby_received),
(lsn_standby_received - lsn_standby_applied));
/*
* Execute the query asynchronously, but don't check for a result. We will
* check the result next time we pause for a monitor step.
*/
log_debug("standby_monitor: %s\n", sqlquery);
if (PQsendQuery(primary_conn, sqlquery) == 0)
log_warning(_("Query could not be sent to primary. %s\n"),
PQerrorMessage(primary_conn));
}
static void
witness_monitor(void)
{
char monitor_witness_timestamp[MAXLEN];
PGresult *res;
char sqlquery[QUERY_STR_LEN];
/*
* Check if the master is still available, if after 5 minutes of retries
* we cannot reconnect, return false.
*/
check_connection(primary_conn, "master"); /* this take up to
* local_options.reconnect_atte
* mpts *
* local_options.reconnect_intv
* l seconds */
if (PQstatus(primary_conn) != CONNECTION_OK)
{
/*
* If we can't reconnect, just exit... XXX we need to make witness
* connect to the new master
*/
terminate(0);
}
/* Fast path for the case where no history is requested */
if (!monitoring_history)
return;
/*
* Cancel any query that is still being executed, so i can insert the
* current record
*/
if (!cancel_query(primary_conn, local_options.master_response_timeout))
return;
if (wait_connection_availability(primary_conn,
local_options.master_response_timeout) != 1)
return;
/* Get local xlog info */
sqlquery_snprintf(sqlquery, "SELECT CURRENT_TIMESTAMP ");
res = PQexec(my_local_conn, sqlquery);
if (PQresultStatus(res) != PGRES_TUPLES_OK)
{
log_err(_("PQexec failed: %s\n"), PQerrorMessage(my_local_conn));
PQclear(res);
/* if there is any error just let it be and retry in next loop */
return;
}
strcpy(monitor_witness_timestamp, PQgetvalue(res, 0, 0));
PQclear(res);
/*
* Build the SQL to execute on primary
*/
sqlquery_snprintf(sqlquery,
"INSERT INTO %s.repl_monitor "
"VALUES(%d, %d, '%s'::timestamp with time zone, "
" pg_current_xlog_location(), null, "
" 0, 0)",
repmgr_schema, primary_options.node, local_options.node,
monitor_witness_timestamp);
/*
* Execute the query asynchronously, but don't check for a result. We will
* check the result next time we pause for a monitor step.
*/
log_debug("witness_monitor: %s\n", sqlquery);
if (PQsendQuery(primary_conn, sqlquery) == 0)
log_warning(_("Query could not be sent to primary. %s\n"),
PQerrorMessage(primary_conn));
}
