void
uhci_cardbus_attach(struct device *parent, struct device *self, void *aux)
{
struct uhci_cardbus_softc *sc = (struct uhci_cardbus_softc *)self;
struct cardbus_attach_args *ca = aux;
cardbus_devfunc_t ct = ca->ca_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
cardbusreg_t csr;
char devinfo[256];
usbd_status r;
const char *vendor;
const char *devname = sc->sc.sc_bus.bdev.dv_xname;
cardbus_devinfo(ca->ca_id, ca->ca_class, 0, devinfo, sizeof(devinfo));
printf(" %s", devinfo);
/* Map I/O registers */
if (Cardbus_mapreg_map(ct, PCI_CBIO, CARDBUS_MAPREG_TYPE_IO, 0,
&sc->sc.iot, &sc->sc.ioh, NULL, &sc->sc.sc_size)) {
printf("%s: can't map io space\n", devname);
return;
}
/* Disable interrupts, so we don't get any spurious ones. */
bus_space_write_2(sc->sc.iot, sc->sc.ioh, UHCI_INTR, 0);
sc->sc_cc = cc;
sc->sc_cf = cf;
sc->sc_ct = ct;
sc->sc.sc_bus.dmatag = ca->ca_dmat;
(ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_IO_ENABLE);
(ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
/* Enable the device. */
csr = cardbus_conf_read(cc, cf, ca->ca_tag,
CARDBUS_COMMAND_STATUS_REG);
cardbus_conf_write(cc, cf, ca->ca_tag, CARDBUS_COMMAND_STATUS_REG,
csr | CARDBUS_COMMAND_MASTER_ENABLE
| CARDBUS_COMMAND_IO_ENABLE);
sc->sc_ih = cardbus_intr_establish(cc, cf, ca->ca_intrline,
IPL_USB, uhci_intr, sc, devname);
if (sc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt\n", devname);
return;
}
printf(": irq %d\n", ca->ca_intrline);
/* Set LEGSUP register to its default value. */
cardbus_conf_write(cc, cf, ca->ca_tag, PCI_LEGSUP,
PCI_LEGSUP_USBPIRQDEN);
switch(cardbus_conf_read(cc, cf, ca->ca_tag, PCI_USBREV) & PCI_USBREV_MASK) {
case PCI_USBREV_PRE_1_0:
sc->sc.sc_bus.usbrev = USBREV_PRE_1_0;
break;
case PCI_USBREV_1_0:
sc->sc.sc_bus.usbrev = USBREV_1_0;
break;
case PCI_USBREV_1_1:
sc->sc.sc_bus.usbrev = USBREV_1_1;
break;
default:
sc->sc.sc_bus.usbrev = USBREV_UNKNOWN;
break;
}
uhci_run(&sc->sc, 0); /* stop the controller */
/* disable interrupts */
bus_space_barrier(sc->sc.iot, sc->sc.ioh, 0, sc->sc.sc_size,
BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE);
bus_space_write_2(sc->sc.iot, sc->sc.ioh, UHCI_INTR, 0);
/* Figure out vendor for root hub descriptor. */
vendor = cardbus_findvendor(ca->ca_id);
sc->sc.sc_id_vendor = CARDBUS_VENDOR(ca->ca_id);
if (vendor)
strlcpy(sc->sc.sc_vendor, vendor, sizeof (sc->sc.sc_vendor));
else
snprintf(sc->sc.sc_vendor, sizeof(sc->sc.sc_vendor),
"vendor 0x%04x", CARDBUS_VENDOR(ca->ca_id));
r = uhci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", devname, r);
bus_space_unmap(sc->sc.iot, sc->sc.ioh, sc->sc.sc_size);
return;
}
/* Attach usb device. */
sc->sc.sc_child = config_found((void *)sc, &sc->sc.sc_bus,
usbctlprint);
}
static void
uhci_cardbus_attach(device_t parent, device_t self,
void *aux)
{
struct uhci_cardbus_softc *sc = device_private(self);
struct cardbus_attach_args *ca = (struct cardbus_attach_args *)aux;
cardbus_devfunc_t ct = ca->ca_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
cardbustag_t tag = ca->ca_tag;
cardbusreg_t csr;
const char *vendor;
const char *devname = device_xname(self);
char devinfo[256];
usbd_status r;
sc->sc.sc_dev = self;
sc->sc.sc_bus.hci_private = sc;
cardbus_devinfo(ca->ca_id, ca->ca_class, 0, devinfo, sizeof(devinfo));
printf(": %s (rev. 0x%02x)\n", devinfo, CARDBUS_REVISION(ca->ca_class));
/* Map I/O registers */
if (Cardbus_mapreg_map(ct, CARDBUS_CBIO, CARDBUS_MAPREG_TYPE_IO, 0,
&sc->sc.iot, &sc->sc.ioh, NULL, &sc->sc.sc_size)) {
printf("%s: can't map i/o space\n", devname);
return;
}
sc->sc_cc = cc;
sc->sc_cf = cf;
sc->sc_ct = ct;
sc->sc_tag = tag;
sc->sc.sc_bus.dmatag = ca->ca_dmat;
#if rbus
#else
XXX (ct->ct_cf->cardbus_io_open)(cc, 0, iob, iob + 0x40);
#endif
(ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_IO_ENABLE);
(ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
/* Enable the device. */
csr = cardbus_conf_read(cc, cf, tag, CARDBUS_COMMAND_STATUS_REG);
cardbus_conf_write(cc, cf, tag, CARDBUS_COMMAND_STATUS_REG,
csr | CARDBUS_COMMAND_MASTER_ENABLE
| CARDBUS_COMMAND_IO_ENABLE);
/* Disable interrupts, so we don't get any spurious ones. */
bus_space_write_2(sc->sc.iot, sc->sc.ioh, UHCI_INTR, 0);
/* Map and establish the interrupt. */
sc->sc_ih = cardbus_intr_establish(cc, cf, ca->ca_intrline,
IPL_USB, uhci_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt\n", devname);
return;
}
/* Set LEGSUP register to its default value. */
cardbus_conf_write(cc, cf, tag, PCI_LEGSUP, PCI_LEGSUP_USBPIRQDEN);
switch(cardbus_conf_read(cc, cf, tag, PCI_USBREV) & PCI_USBREV_MASK) {
case PCI_USBREV_PRE_1_0:
sc->sc.sc_bus.usbrev = USBREV_PRE_1_0;
break;
case PCI_USBREV_1_0:
sc->sc.sc_bus.usbrev = USBREV_1_0;
break;
case PCI_USBREV_1_1:
sc->sc.sc_bus.usbrev = USBREV_1_1;
break;
default:
sc->sc.sc_bus.usbrev = USBREV_UNKNOWN;
break;
}
/* Figure out vendor for root hub descriptor. */
vendor = cardbus_findvendor(ca->ca_id);
sc->sc.sc_id_vendor = CARDBUS_VENDOR(ca->ca_id);
if (vendor)
strlcpy(sc->sc.sc_vendor, vendor, sizeof(sc->sc.sc_vendor));
else
snprintf(sc->sc.sc_vendor, sizeof(sc->sc.sc_vendor),
"vendor 0x%04x", CARDBUS_VENDOR(ca->ca_id));
r = uhci_init(&sc->sc);
if (r != USBD_NORMAL_COMPLETION) {
printf("%s: init failed, error=%d\n", devname, r);
/* Avoid spurious interrupts. */
cardbus_intr_disestablish(sc->sc_cc, sc->sc_cf, sc->sc_ih);
sc->sc_ih = NULL;
return;
}
#if NEHCI_CARDBUS > 0
usb_cardbus_add(&sc->sc_cardbus, ca, self);
#endif
/* Attach usb device. */
sc->sc.sc_child = config_found(self, &sc->sc.sc_bus, usbctlprint);
}