static FT_Error
cff_encoding_load( CFF_Encoding encoding,
CFF_Charset charset,
FT_UInt num_glyphs,
FT_Stream stream,
FT_ULong base_offset,
FT_ULong offset )
{
FT_Error error = CFF_Err_Ok;
FT_UInt count;
FT_UInt j;
FT_UShort glyph_sid;
FT_UInt glyph_code;
/* Check for charset->sids. If we do not have this, we fail. */
if ( !charset->sids )
{
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Zero out the code to gid/sid mappings. */
for ( j = 0; j < 256; j++ )
{
encoding->sids [j] = 0;
encoding->codes[j] = 0;
}
/* Note: The encoding table in a CFF font is indexed by glyph index; */
/* the first encoded glyph index is 1. Hence, we read the character */
/* code (`glyph_code') at index j and make the assignment: */
/* */
/* encoding->codes[glyph_code] = j + 1 */
/* */
/* We also make the assignment: */
/* */
/* encoding->sids[glyph_code] = charset->sids[j + 1] */
/* */
/* This gives us both a code to GID and a code to SID mapping. */
if ( offset > 1 )
{
encoding->offset = base_offset + offset;
/* we need to parse the table to determine its size */
if ( FT_STREAM_SEEK( encoding->offset ) ||
FT_READ_BYTE( encoding->format ) ||
FT_READ_BYTE( count ) )
goto Exit;
switch ( encoding->format & 0x7F )
{
case 0:
{
FT_Byte* p;
/* By convention, GID 0 is always ".notdef" and is never */
/* coded in the font. Hence, the number of codes found */
/* in the table is `count+1'. */
/* */
encoding->count = count + 1;
if ( FT_FRAME_ENTER( count ) )
goto Exit;
p = (FT_Byte*)stream->cursor;
for ( j = 1; j <= count; j++ )
{
glyph_code = *p++;
/* Make sure j is not too big. */
if ( j < num_glyphs )
{
/* Assign code to GID mapping. */
encoding->codes[glyph_code] = (FT_UShort)j;
/* Assign code to SID mapping. */
encoding->sids[glyph_code] = charset->sids[j];
}
}
FT_FRAME_EXIT();
}
break;
case 1:
{
FT_UInt nleft;
FT_UInt i = 1;
FT_UInt k;
encoding->count = 0;
/* Parse the Format1 ranges. */
for ( j = 0; j < count; j++, i += nleft )
{
/* Read the first glyph code of the range. */
if ( FT_READ_BYTE( glyph_code ) )
goto Exit;
/* Read the number of codes in the range. */
if ( FT_READ_BYTE( nleft ) )
goto Exit;
/* Increment nleft, so we read `nleft + 1' codes/sids. */
nleft++;
/* compute max number of character codes */
if ( (FT_UInt)nleft > encoding->count )
encoding->count = nleft;
/* Fill in the range of codes/sids. */
for ( k = i; k < nleft + i; k++, glyph_code++ )
{
/* Make sure k is not too big. */
if ( k < num_glyphs && glyph_code < 256 )
{
/* Assign code to GID mapping. */
encoding->codes[glyph_code] = (FT_UShort)k;
/* Assign code to SID mapping. */
encoding->sids[glyph_code] = charset->sids[k];
}
}
}
/* simple check; one never knows what can be found in a font */
if ( encoding->count > 256 )
encoding->count = 256;
}
break;
default:
FT_ERROR(( "cff_encoding_load: invalid table format!\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
/* Parse supplemental encodings, if any. */
if ( encoding->format & 0x80 )
{
FT_UInt gindex;
/* count supplements */
if ( FT_READ_BYTE( count ) )
goto Exit;
for ( j = 0; j < count; j++ )
{
/* Read supplemental glyph code. */
if ( FT_READ_BYTE( glyph_code ) )
goto Exit;
/* Read the SID associated with this glyph code. */
if ( FT_READ_USHORT( glyph_sid ) )
goto Exit;
/* Assign code to SID mapping. */
encoding->sids[glyph_code] = glyph_sid;
/* First, look up GID which has been assigned to */
/* SID glyph_sid. */
for ( gindex = 0; gindex < num_glyphs; gindex++ )
{
if ( charset->sids[gindex] == glyph_sid )
{
encoding->codes[glyph_code] = (FT_UShort)gindex;
break;
}
}
}
}
}
else
{
/* We take into account the fact a CFF font can use a predefined */
/* encoding without containing all of the glyphs encoded by this */
/* encoding (see the note at the end of section 12 in the CFF */
/* specification). */
switch ( (FT_UInt)offset )
{
case 0:
/* First, copy the code to SID mapping. */
FT_ARRAY_COPY( encoding->sids, cff_standard_encoding, 256 );
goto Populate;
case 1:
/* First, copy the code to SID mapping. */
FT_ARRAY_COPY( encoding->sids, cff_expert_encoding, 256 );
Populate:
/* Construct code to GID mapping from code to SID mapping */
/* and charset. */
encoding->count = 0;
error = cff_charset_compute_cids( charset, num_glyphs,
stream->memory );
if ( error )
goto Exit;
for ( j = 0; j < 256; j++ )
{
FT_UInt sid = encoding->sids[j];
FT_UInt gid = 0;
if ( sid )
gid = cff_charset_cid_to_gindex( charset, sid );
if ( gid != 0 )
{
encoding->codes[j] = (FT_UShort)gid;
if ( encoding->count < j + 1 )
encoding->count = j + 1;
}
else
{
encoding->codes[j] = 0;
encoding->sids [j] = 0;
}
}
break;
default:
FT_ERROR(( "cff_encoding_load: invalid table format!\n" ));
error = CFF_Err_Invalid_File_Format;
goto Exit;
}
}
Exit:
/* Clean up if there was an error. */
return error;
}
cff_slot_load( CFF_GlyphSlot glyph,
CFF_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
CFF_Decoder decoder;
PS_Decoder psdecoder;
TT_Face face = (TT_Face)glyph->root.face;
FT_Bool hinting, scaled, force_scaling;
CFF_Font cff = (CFF_Font)face->extra.data;
PSAux_Service psaux = (PSAux_Service)face->psaux;
const CFF_Decoder_Funcs decoder_funcs = psaux->cff_decoder_funcs;
FT_Matrix font_matrix;
FT_Vector font_offset;
force_scaling = FALSE;
/* in a CID-keyed font, consider `glyph_index' as a CID and map */
/* it immediately to the real glyph_index -- if it isn't a */
/* subsetted font, glyph_indices and CIDs are identical, though */
if ( cff->top_font.font_dict.cid_registry != 0xFFFFU &&
cff->charset.cids )
{
/* don't handle CID 0 (.notdef) which is directly mapped to GID 0 */
if ( glyph_index != 0 )
{
glyph_index = cff_charset_cid_to_gindex( &cff->charset,
glyph_index );
if ( glyph_index == 0 )
return FT_THROW( Invalid_Argument );
}
}
else if ( glyph_index >= cff->num_glyphs )
return FT_THROW( Invalid_Argument );
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
glyph->x_scale = 0x10000L;
glyph->y_scale = 0x10000L;
if ( size )
{
glyph->x_scale = size->root.metrics.x_scale;
glyph->y_scale = size->root.metrics.y_scale;
}
#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
/* try to load embedded bitmap if any */
/* */
/* XXX: The convention should be emphasized in */
/* the documents because it can be confusing. */
if ( size )
{
CFF_Face cff_face = (CFF_Face)size->root.face;
SFNT_Service sfnt = (SFNT_Service)cff_face->sfnt;
FT_Stream stream = cff_face->root.stream;
if ( size->strike_index != 0xFFFFFFFFUL &&
sfnt->load_eblc &&
( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
{
TT_SBit_MetricsRec metrics;
error = sfnt->load_sbit_image( face,
size->strike_index,
glyph_index,
(FT_UInt)load_flags,
stream,
&glyph->root.bitmap,
&metrics );
if ( !error )
{
FT_Bool has_vertical_info;
FT_UShort advance;
FT_Short dummy;
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
glyph->root.metrics.width = (FT_Pos)metrics.width << 6;
glyph->root.metrics.height = (FT_Pos)metrics.height << 6;
glyph->root.metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6;
glyph->root.metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6;
glyph->root.metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6;
glyph->root.metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6;
glyph->root.metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6;
glyph->root.metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6;
glyph->root.format = FT_GLYPH_FORMAT_BITMAP;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
glyph->root.bitmap_left = metrics.vertBearingX;
glyph->root.bitmap_top = metrics.vertBearingY;
}
else
{
glyph->root.bitmap_left = metrics.horiBearingX;
glyph->root.bitmap_top = metrics.horiBearingY;
}
/* compute linear advance widths */
(void)( (SFNT_Service)face->sfnt )->get_metrics( face, 0,
glyph_index,
&dummy,
&advance );
glyph->root.linearHoriAdvance = advance;
has_vertical_info = FT_BOOL(
face->vertical_info &&
face->vertical.number_Of_VMetrics > 0 );
/* get the vertical metrics from the vmtx table if we have one */
if ( has_vertical_info )
{
(void)( (SFNT_Service)face->sfnt )->get_metrics( face, 1,
glyph_index,
&dummy,
&advance );
glyph->root.linearVertAdvance = advance;
}
else
{
/* make up vertical ones */
if ( face->os2.version != 0xFFFFU )
glyph->root.linearVertAdvance = (FT_Pos)
( face->os2.sTypoAscender - face->os2.sTypoDescender );
else
glyph->root.linearVertAdvance = (FT_Pos)
( face->horizontal.Ascender - face->horizontal.Descender );
}
return error;
}
}
}
#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */
/* return immediately if we only want the embedded bitmaps */
if ( load_flags & FT_LOAD_SBITS_ONLY )
return FT_THROW( Invalid_Argument );
/* if we have a CID subfont, use its matrix (which has already */
/* been multiplied with the root matrix) */
/* this scaling is only relevant if the PS hinter isn't active */
if ( cff->num_subfonts )
{
FT_Long top_upm, sub_upm;
FT_Byte fd_index = cff_fd_select_get( &cff->fd_select,
glyph_index );
if ( fd_index >= cff->num_subfonts )
fd_index = (FT_Byte)( cff->num_subfonts - 1 );
top_upm = (FT_Long)cff->top_font.font_dict.units_per_em;
sub_upm = (FT_Long)cff->subfonts[fd_index]->font_dict.units_per_em;
font_matrix = cff->subfonts[fd_index]->font_dict.font_matrix;
font_offset = cff->subfonts[fd_index]->font_dict.font_offset;
if ( top_upm != sub_upm )
{
glyph->x_scale = FT_MulDiv( glyph->x_scale, top_upm, sub_upm );
glyph->y_scale = FT_MulDiv( glyph->y_scale, top_upm, sub_upm );
force_scaling = TRUE;
}
}
else
{
font_matrix = cff->top_font.font_dict.font_matrix;
font_offset = cff->top_font.font_dict.font_offset;
}
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
/* top-level code ensures that FT_LOAD_NO_HINTING is set */
/* if FT_LOAD_NO_SCALE is active */
hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_HINTING ) == 0 );
scaled = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 );
glyph->hint = hinting;
glyph->scaled = scaled;
glyph->root.format = FT_GLYPH_FORMAT_OUTLINE; /* by default */
{
#ifdef CFF_CONFIG_OPTION_OLD_ENGINE
PS_Driver driver = (PS_Driver)FT_FACE_DRIVER( face );
#endif
FT_Byte* charstring;
FT_ULong charstring_len;
decoder_funcs->init( &decoder, face, size, glyph, hinting,
FT_LOAD_TARGET_MODE( load_flags ),
cff_get_glyph_data,
cff_free_glyph_data );
/* this is for pure CFFs */
if ( load_flags & FT_LOAD_ADVANCE_ONLY )
decoder.width_only = TRUE;
decoder.builder.no_recurse =
(FT_Bool)( load_flags & FT_LOAD_NO_RECURSE );
/* now load the unscaled outline */
error = cff_get_glyph_data( face, glyph_index,
&charstring, &charstring_len );
if ( error )
goto Glyph_Build_Finished;
error = decoder_funcs->prepare( &decoder, size, glyph_index );
if ( error )
goto Glyph_Build_Finished;
#ifdef CFF_CONFIG_OPTION_OLD_ENGINE
/* choose which CFF renderer to use */
if ( driver->hinting_engine == FT_HINTING_FREETYPE )
error = decoder_funcs->parse_charstrings_old( &decoder,
charstring,
charstring_len,
0 );
else
#endif
{
psaux->ps_decoder_init( &psdecoder, &decoder, FALSE );
error = decoder_funcs->parse_charstrings( &psdecoder,
charstring,
charstring_len );
/* Adobe's engine uses 16.16 numbers everywhere; */
/* as a consequence, glyphs larger than 2000ppem get rejected */
if ( FT_ERR_EQ( error, Glyph_Too_Big ) )
{
/* this time, we retry unhinted and scale up the glyph later on */
/* (the engine uses and sets the hardcoded value 0x10000 / 64 = */
/* 0x400 for both `x_scale' and `y_scale' in this case) */
hinting = FALSE;
force_scaling = TRUE;
glyph->hint = hinting;
error = decoder_funcs->parse_charstrings( &psdecoder,
charstring,
charstring_len );
}
}
cff_free_glyph_data( face, &charstring, charstring_len );
if ( error )
goto Glyph_Build_Finished;
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* Control data and length may not be available for incremental */
/* fonts. */
if ( face->root.internal->incremental_interface )
{
glyph->root.control_data = NULL;
glyph->root.control_len = 0;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
/* We set control_data and control_len if charstrings is loaded. */
/* See how charstring loads at cff_index_access_element() in */
/* cffload.c. */
{
CFF_Index csindex = &cff->charstrings_index;
if ( csindex->offsets )
{
glyph->root.control_data = csindex->bytes +
csindex->offsets[glyph_index] - 1;
glyph->root.control_len = (FT_Long)charstring_len;
}
}
Glyph_Build_Finished:
/* save new glyph tables, if no error */
if ( !error )
decoder.builder.funcs.done( &decoder.builder );
/* XXX: anything to do for broken glyph entry? */
}
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* Incremental fonts can optionally override the metrics. */
if ( !error &&
face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
metrics.bearing_x = decoder.builder.left_bearing.x;
metrics.bearing_y = 0;
metrics.advance = decoder.builder.advance.x;
metrics.advance_v = decoder.builder.advance.y;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, FALSE, &metrics );
decoder.builder.left_bearing.x = metrics.bearing_x;
decoder.builder.advance.x = metrics.advance;
decoder.builder.advance.y = metrics.advance_v;
}
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
if ( !error )
{
/* Now, set the metrics -- this is rather simple, as */
/* the left side bearing is the xMin, and the top side */
/* bearing the yMax. */
/* For composite glyphs, return only left side bearing and */
/* advance width. */
if ( load_flags & FT_LOAD_NO_RECURSE )
{
FT_Slot_Internal internal = glyph->root.internal;
glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x;
glyph->root.metrics.horiAdvance = decoder.glyph_width;
internal->glyph_matrix = font_matrix;
internal->glyph_delta = font_offset;
internal->glyph_transformed = 1;
}
else
{
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &glyph->root.metrics;
FT_Bool has_vertical_info;
if ( face->horizontal.number_Of_HMetrics )
{
FT_Short horiBearingX = 0;
FT_UShort horiAdvance = 0;
( (SFNT_Service)face->sfnt )->get_metrics( face, 0,
glyph_index,
&horiBearingX,
&horiAdvance );
metrics->horiAdvance = horiAdvance;
metrics->horiBearingX = horiBearingX;
glyph->root.linearHoriAdvance = horiAdvance;
}
else
{
/* copy the _unscaled_ advance width */
metrics->horiAdvance = decoder.glyph_width;
glyph->root.linearHoriAdvance = decoder.glyph_width;
}
glyph->root.internal->glyph_transformed = 0;
has_vertical_info = FT_BOOL( face->vertical_info &&
face->vertical.number_Of_VMetrics > 0 );
/* get the vertical metrics from the vmtx table if we have one */
if ( has_vertical_info )
{
FT_Short vertBearingY = 0;
FT_UShort vertAdvance = 0;
( (SFNT_Service)face->sfnt )->get_metrics( face, 1,
glyph_index,
&vertBearingY,
&vertAdvance );
metrics->vertBearingY = vertBearingY;
metrics->vertAdvance = vertAdvance;
}
else
{
/* make up vertical ones */
if ( face->os2.version != 0xFFFFU )
metrics->vertAdvance = (FT_Pos)( face->os2.sTypoAscender -
face->os2.sTypoDescender );
else
metrics->vertAdvance = (FT_Pos)( face->horizontal.Ascender -
face->horizontal.Descender );
}
glyph->root.linearVertAdvance = metrics->vertAdvance;
glyph->root.format = FT_GLYPH_FORMAT_OUTLINE;
glyph->root.outline.flags = 0;
if ( size && size->root.metrics.y_ppem < 24 )
glyph->root.outline.flags |= FT_OUTLINE_HIGH_PRECISION;
glyph->root.outline.flags |= FT_OUTLINE_REVERSE_FILL;
/* apply the font matrix, if any */
if ( font_matrix.xx != 0x10000L || font_matrix.yy != 0x10000L ||
font_matrix.xy != 0 || font_matrix.yx != 0 )
{
FT_Outline_Transform( &glyph->root.outline, &font_matrix );
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance,
font_matrix.xx );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance,
font_matrix.yy );
}
if ( font_offset.x || font_offset.y )
{
FT_Outline_Translate( &glyph->root.outline,
font_offset.x,
font_offset.y );
metrics->horiAdvance += font_offset.x;
metrics->vertAdvance += font_offset.y;
}
if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 || force_scaling )
{
/* scale the outline and the metrics */
FT_Int n;
FT_Outline* cur = &glyph->root.outline;
FT_Vector* vec = cur->points;
FT_Fixed x_scale = glyph->x_scale;
FT_Fixed y_scale = glyph->y_scale;
/* First of all, scale the points */
if ( !hinting || !decoder.builder.hints_funcs )
for ( n = cur->n_points; n > 0; n--, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
/* Then scale the metrics */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale );
}
/* compute the other metrics */
FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax;
if ( has_vertical_info )
metrics->vertBearingX = metrics->horiBearingX -
metrics->horiAdvance / 2;
else
{
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
ft_synthesize_vertical_metrics( metrics,
metrics->vertAdvance );
}
}
}
return error;
}
