int main(int argc, char **argv) {
log_file_disable();
log_shell_enable();
log_level_set(LOG_NOTICE);
progname = malloc(16);
strcpy(progname, "pilight-control");
struct options_t *options = NULL;
struct ssdp_list_t *ssdp_list = NULL;
int sockfd = 0;
char *recvBuff = NULL;
char *message = NULL;
char *pch = NULL;
steps_t steps = WELCOME;
char device[50];
char location[50];
char state[10] = {'\0'};
char values[255] = {'\0'};
struct conf_locations_t *slocation = NULL;
struct conf_devices_t *sdevice = NULL;
int has_values = 0;
char *server = NULL;
unsigned short port = 0;
JsonNode *json = NULL;
JsonNode *jconfig = NULL;
JsonNode *jcode = NULL;
JsonNode *jvalues = NULL;
/* Define all CLI arguments of this program */
options_add(&options, 'H', "help", no_value, 0, NULL);
options_add(&options, 'V', "version", no_value, 0, NULL);
options_add(&options, 'l', "location", has_value, 0, NULL);
options_add(&options, 'd', "device", has_value, 0, NULL);
options_add(&options, 's', "state", has_value, 0, NULL);
options_add(&options, 'v', "values", has_value, 0, NULL);
options_add(&options, 'S', "server", has_value, 0, "^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]).){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$");
options_add(&options, 'P', "port", has_value, 0, "[0-9]{1,4}");
/* Store all CLI arguments for later usage
and also check if the CLI arguments where
used correctly by the user. This will also
fill all necessary values in the options struct */
while(1) {
int c;
c = options_parse(&options, argc, argv, 1, &optarg);
if(c == -1)
break;
if(c == -2)
c = 'H';
switch(c) {
case 'H':
printf("\t -H --help\t\t\tdisplay this message\n");
printf("\t -V --version\t\t\tdisplay version\n");
printf("\t -S --server=x.x.x.x\t\tconnect to server address\n");
printf("\t -P --port=xxxx\t\t\tconnect to server port\n");
printf("\t -l --location=location\t\tthe location in which the device resides\n");
printf("\t -d --device=device\t\tthe device that you want to control\n");
printf("\t -s --state=state\t\tthe new state of the device\n");
printf("\t -v --values=values\t\tspecific comma separated values, e.g.:\n");
printf("\t\t\t\t\t-v dimlevel=10\n");
exit(EXIT_SUCCESS);
break;
case 'V':
printf("%s %s\n", progname, VERSION);
exit(EXIT_SUCCESS);
break;
case 'l':
strcpy(location, optarg);
break;
case 'd':
strcpy(device, optarg);
break;
case 's':
strcpy(state, optarg);
break;
case 'v':
strcpy(values, optarg);
break;
case 'S':
server = realloc(server, strlen(optarg)+1);
strcpy(server, optarg);
break;
case 'P':
port = (unsigned short)atoi(optarg);
break;
default:
printf("Usage: %s -l location -d device -s state\n", progname);
exit(EXIT_SUCCESS);
break;
}
}
options_delete(options);
if(strlen(location) == 0 || strlen(device) == 0 || strlen(state) == 0) {
printf("Usage: %s -l location -d device -s state\n", progname);
exit(EXIT_SUCCESS);
}
if(server && port > 0) {
if((sockfd = socket_connect(server, port)) == -1) {
logprintf(LOG_ERR, "could not connect to pilight-daemon");
exit(EXIT_FAILURE);
}
} else if(ssdp_seek(&ssdp_list) == -1) {
logprintf(LOG_ERR, "no pilight ssdp connections found");
goto close;
} else {
if((sockfd = socket_connect(ssdp_list->ip, ssdp_list->port)) == -1) {
logprintf(LOG_ERR, "could not connect to pilight-daemon");
goto close;
}
sfree((void *)&ssdp_list);
}
protocol_init();
while(1) {
if(steps > WELCOME) {
/* Clear the receive buffer again and read the welcome message */
if(steps == CONFIG) {
if((recvBuff = socket_read_big(sockfd)) != NULL) {
json = json_decode(recvBuff);
json_find_string(json, "message", &message);
} else {
goto close;
}
} else {
if((recvBuff = socket_read(sockfd)) != NULL) {
json = json_decode(recvBuff);
json_find_string(json, "message", &message);
} else {
goto close;
}
}
usleep(100);
}
switch(steps) {
case WELCOME:
socket_write(sockfd, "{\"message\":\"client controller\"}");
steps=IDENTIFY;
break;
case IDENTIFY:
if(strcmp(message, "accept client") == 0) {
steps=REQUEST;
}
if(strcmp(message, "reject client") == 0) {
steps=REJECT;
}
case REQUEST:
socket_write(sockfd, "{\"message\":\"request config\"}");
steps=CONFIG;
json_delete(json);
break;
case CONFIG:
if((jconfig = json_find_member(json, "config")) != NULL) {
config_parse(jconfig);
if(config_get_location(location, &slocation) == 0) {
if(config_get_device(location, device, &sdevice) == 0) {
JsonNode *joutput = json_mkobject();
jcode = json_mkobject();
jvalues = json_mkobject();
json_append_member(jcode, "location", json_mkstring(location));
json_append_member(jcode, "device", json_mkstring(device));
pch = strtok(values, ",=");
while(pch != NULL) {
char *name = strdup(pch);
pch = strtok(NULL, ",=");
if(pch == NULL) {
break;
} else {
char *val = strdup(pch);
if(pch != NULL) {
if(config_valid_value(location, device, name, val) == 0) {
if(isNumeric(val) == EXIT_SUCCESS) {
json_append_member(jvalues, name, json_mknumber(atoi(val)));
} else {
json_append_member(jvalues, name, json_mkstring(val));
}
has_values = 1;
} else {
logprintf(LOG_ERR, "\"%s\" is an invalid value for device \"%s\"", name, device);
goto close;
}
} else {
logprintf(LOG_ERR, "\"%s\" is an invalid value for device \"%s\"", name, device);
goto close;
}
pch = strtok(NULL, ",=");
if(pch == NULL) {
break;
}
}
}
if(config_valid_state(location, device, state) == 0) {
json_append_member(jcode, "state", json_mkstring(state));
} else {
logprintf(LOG_ERR, "\"%s\" is an invalid state for device \"%s\"", state, device);
goto close;
}
if(has_values == 1) {
json_append_member(jcode, "values", jvalues);
} else {
json_delete(jvalues);
}
json_append_member(joutput, "message", json_mkstring("send"));
json_append_member(joutput, "code", jcode);
char *output = json_stringify(joutput, NULL);
socket_write(sockfd, output);
sfree((void *)&output);
json_delete(joutput);
} else {
logprintf(LOG_ERR, "the device \"%s\" does not exist", device);
goto close;
}
} else {
logprintf(LOG_ERR, "the location \"%s\" does not exist", location);
goto close;
}
}
json_delete(json);
goto close;
break;
case REJECT:
default:
json_delete(json);
goto close;
break;
}
}
close:
if(sockfd > 0) {
socket_close(sockfd);
}
if(server) {
sfree((void *)&server);
}
log_shell_disable();
config_gc();
protocol_gc();
socket_gc();
options_gc();
log_gc();
sfree((void *)&progname);
return EXIT_SUCCESS;
}
int main(int argc, char **argv) {
disable_file_log();
enable_shell_log();
set_loglevel(LOG_NOTICE);
progname = malloc((10*sizeof(char))+1);
progname = strdup("433-control");
options = malloc(255*sizeof(struct options_t));
int sockfd = 0;
char *recvBuff = NULL;
char *message;
steps_t steps = WELCOME;
char device[50];
char location[50];
char state[10] = {'\0'};
struct conf_locations_t *slocation = NULL;
struct conf_devices_t *sdevice = NULL;
char server[16] = "127.0.0.1";
unsigned short port = PORT;
JsonNode *json = json_mkobject();
JsonNode *config = json_mkobject();
JsonNode *code = json_mkobject();
/* Define all CLI arguments of this program */
addOption(&options, 'h', "help", no_value, 0, NULL);
addOption(&options, 'v', "version", no_value, 0, NULL);
addOption(&options, 'l', "location", has_value, 0, NULL);
addOption(&options, 'd', "device", has_value, 0, NULL);
addOption(&options, 's', "state", has_value, 0, NULL);
addOption(&options, 'S', "server", has_value, 0, "^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]).){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$");
addOption(&options, 'P', "port", has_value, 0, "[0-9]{1,4}");
/* Store all CLI arguments for later usage
and also check if the CLI arguments where
used correctly by the user. This will also
fill all necessary values in the options struct */
while(1) {
int c;
c = getOptions(&options, argc, argv, 1);
if(c == -1)
break;
switch(c) {
case 'h':
printf("\t -h --help\t\t\tdisplay this message\n");
printf("\t -v --version\t\t\tdisplay version\n");
printf("\t -S --server=%s\t\tconnect to server address\n", server);
printf("\t -P --port=%d\t\t\tconnect to server port\n", port);
printf("\t -l --location=location\t\tthe location in which the device resides\n");
printf("\t -d --device=device\t\tthe device that you want to control\n");
printf("\t -s --state=state\t\tthe new state of the device\n");
exit(EXIT_SUCCESS);
break;
case 'v':
printf("%s %s\n", progname, "1.0");
exit(EXIT_SUCCESS);
break;
case 'l':
strcpy(location, optarg);
break;
case 'd':
strcpy(device, optarg);
break;
case 's':
strcpy(state, optarg);
break;
case 'S':
strcpy(server, optarg);
break;
case 'P':
port = (unsigned short)atoi(optarg);
break;
default:
printf("Usage: %s -l location -d device\n", progname);
exit(EXIT_SUCCESS);
break;
}
}
if(strlen(location) == 0 || strlen(device) == 0) {
printf("Usage: %s -l location -d device\n", progname);
exit(EXIT_SUCCESS);
}
if((sockfd = connect_to_server(strdup(server), port)) == -1) {
logprintf(LOG_ERR, "could not connect to 433-daemon");
exit(EXIT_FAILURE);
}
/* Initialize peripheral modules */
hw_init();
while(1) {
if(steps > WELCOME) {
/* Clear the receive buffer again and read the welcome message */
if(steps == REQUEST) {
if((recvBuff = socket_read_big(sockfd)) != NULL) {
json = json_decode(recvBuff);
json_find_string(json, "message", &message);
} else {
goto close;
}
} else {
if((recvBuff = socket_read(sockfd)) != NULL) {
json = json_decode(recvBuff);
json_find_string(json, "message", &message);
} else {
goto close;
}
}
usleep(250);
}
switch(steps) {
case WELCOME:
socket_write(sockfd, "{\"message\":\"client controller\"}");
steps=IDENTIFY;
break;
case IDENTIFY:
if(strcmp(message, "accept client") == 0) {
steps=REQUEST;
}
if(strcmp(message, "reject client") == 0) {
steps=REJECT;
}
case REQUEST:
socket_write(sockfd, "{\"message\":\"request config\"}");
steps=CONFIG;
break;
case CONFIG:
if((config = json_find_member(json, "config")) != NULL) {
config_parse(config);
if(config_get_location(location, &slocation) == 0) {
if(config_get_device(location, device, &sdevice) == 0) {
json_delete(json);
json = json_mkobject();
code = json_mkobject();
json_append_member(code, "location", json_mkstring(location));
json_append_member(code, "device", json_mkstring(device));
if(strlen(state) > 0) {
if(config_valid_state(location, device, state) == 0) {
json_append_member(code, "state", json_mkstring(state));
} else {
logprintf(LOG_ERR, "\"%s\" is an invalid state for device \"%s\"", state, device);
goto close;
}
}
json_append_member(json, "message", json_mkstring("send"));
json_append_member(json, "code", code);
socket_write(sockfd, json_stringify(json, NULL));
} else {
logprintf(LOG_ERR, "the device \"%s\" does not exist", device);
goto close;
}
} else {
logprintf(LOG_ERR, "the location \"%s\" does not exist", location);
goto close;
}
}
goto close;
break;
case REJECT:
default:
goto close;
break;
}
}
close:
json_delete(json);
socket_close(sockfd);
return EXIT_SUCCESS;
}