static void set_cylinder_pressure_spinbuttons(struct cylinder_widget *cylinder, int start, int end) { double pressure; convert_pressure(start, &pressure); gtk_spin_button_set_value(cylinder->start, pressure); convert_pressure(end, &pressure); gtk_spin_button_set_value(cylinder->end, pressure); }
static void set_cylinder_pressure_spinbuttons(struct cylinder_widget *cylinder, cylinder_t *cyl) { int set; unsigned int start, end; double pressure; start = cyl->start.mbar; end = cyl->end.mbar; set = start || end; if (!set) { start = cyl->sample_start.mbar; end = cyl->sample_end.mbar; } gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(cylinder->pressure_button), set); gtk_widget_set_sensitive(cylinder->start, set); gtk_widget_set_sensitive(cylinder->end, set); convert_pressure(start, &pressure); gtk_spin_button_set_value(GTK_SPIN_BUTTON(cylinder->start), pressure); convert_pressure(end, &pressure); gtk_spin_button_set_value(GTK_SPIN_BUTTON(cylinder->end), pressure); }
static void sample_cb (dc_sample_type_t type, dc_sample_value_t value, void *userdata) { static const char *events[] = { "none", "deco", "rbt", "ascent", "ceiling", "workload", "transmitter", "violation", "bookmark", "surface", "safety stop", "gaschange", "safety stop (voluntary)", "safety stop (mandatory)", "deepstop", "ceiling (safety stop)", "floor", "divetime", "maxdepth", "OLF", "PO2", "airtime", "rgbm", "heading", "tissue level warning", "gaschange2"}; static const char *decostop[] = { "ndl", "safety", "deco", "deep"}; sample_data_t *sampledata = (sample_data_t *) userdata; switch (type) { case DC_SAMPLE_TIME: if (sampledata->nsamples++) fprintf (sampledata->ostream, "</sample>\n"); fprintf (sampledata->ostream, "<sample>\n"); fprintf (sampledata->ostream, " <time>%02u:%02u</time>\n", value.time / 60, value.time % 60); break; case DC_SAMPLE_DEPTH: fprintf (sampledata->ostream, " <depth>%.2f</depth>\n", convert_depth(value.depth, sampledata->units)); break; case DC_SAMPLE_PRESSURE: fprintf (sampledata->ostream, " <pressure tank=\"%u\">%.2f</pressure>\n", value.pressure.tank, convert_pressure(value.pressure.value, sampledata->units)); break; case DC_SAMPLE_TEMPERATURE: fprintf (sampledata->ostream, " <temperature>%.2f</temperature>\n", convert_temperature(value.temperature, sampledata->units)); break; case DC_SAMPLE_EVENT: if (value.event.type != SAMPLE_EVENT_GASCHANGE && value.event.type != SAMPLE_EVENT_GASCHANGE2) { fprintf (sampledata->ostream, " <event type=\"%u\" time=\"%u\" flags=\"%u\" value=\"%u\">%s</event>\n", value.event.type, value.event.time, value.event.flags, value.event.value, events[value.event.type]); } break; case DC_SAMPLE_RBT: fprintf (sampledata->ostream, " <rbt>%u</rbt>\n", value.rbt); break; case DC_SAMPLE_HEARTBEAT: fprintf (sampledata->ostream, " <heartbeat>%u</heartbeat>\n", value.heartbeat); break; case DC_SAMPLE_BEARING: fprintf (sampledata->ostream, " <bearing>%u</bearing>\n", value.bearing); break; case DC_SAMPLE_VENDOR: fprintf (sampledata->ostream, " <vendor type=\"%u\" size=\"%u\">", value.vendor.type, value.vendor.size); for (unsigned int i = 0; i < value.vendor.size; ++i) fprintf (sampledata->ostream, "%02X", ((const unsigned char *) value.vendor.data)[i]); fprintf (sampledata->ostream, "</vendor>\n"); break; case DC_SAMPLE_SETPOINT: fprintf (sampledata->ostream, " <setpoint>%.2f</setpoint>\n", value.setpoint); break; case DC_SAMPLE_PPO2: fprintf (sampledata->ostream, " <ppo2>%.2f</ppo2>\n", value.ppo2); break; case DC_SAMPLE_CNS: fprintf (sampledata->ostream, " <cns>%.1f</cns>\n", value.cns * 100.0); break; case DC_SAMPLE_DECO: fprintf (sampledata->ostream, " <deco time=\"%u\" depth=\"%.2f\">%s</deco>\n", value.deco.time, convert_depth(value.deco.depth, sampledata->units), decostop[value.deco.type]); break; case DC_SAMPLE_GASMIX: fprintf (sampledata->ostream, " <gasmix>%u</gasmix>\n", value.gasmix); break; default: break; } }
static dc_status_t dctool_xml_output_write (dctool_output_t *abstract, dc_parser_t *parser, const unsigned char data[], unsigned int size, const unsigned char fingerprint[], unsigned int fsize) { dctool_xml_output_t *output = (dctool_xml_output_t *) abstract; dc_status_t status = DC_STATUS_SUCCESS; // Initialize the sample data. sample_data_t sampledata = {0}; sampledata.nsamples = 0; sampledata.ostream = output->ostream; sampledata.units = output->units; fprintf (output->ostream, "<dive>\n<number>%u</number>\n<size>%u</size>\n", abstract->number, size); if (fingerprint) { fprintf (output->ostream, "<fingerprint>"); for (unsigned int i = 0; i < fsize; ++i) fprintf (output->ostream, "%02X", fingerprint[i]); fprintf (output->ostream, "</fingerprint>\n"); } // Parse the datetime. message ("Parsing the datetime.\n"); dc_datetime_t dt = {0}; status = dc_parser_get_datetime (parser, &dt); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the datetime."); goto cleanup; } if (dt.timezone == DC_TIMEZONE_NONE) { fprintf (output->ostream, "<datetime>%04i-%02i-%02i %02i:%02i:%02i</datetime>\n", dt.year, dt.month, dt.day, dt.hour, dt.minute, dt.second); } else { fprintf (output->ostream, "<datetime>%04i-%02i-%02i %02i:%02i:%02i %+03i:%02i</datetime>\n", dt.year, dt.month, dt.day, dt.hour, dt.minute, dt.second, dt.timezone / 3600, (dt.timezone % 3600) / 60); } // Parse the divetime. message ("Parsing the divetime.\n"); unsigned int divetime = 0; status = dc_parser_get_field (parser, DC_FIELD_DIVETIME, 0, &divetime); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the divetime."); goto cleanup; } fprintf (output->ostream, "<divetime>%02u:%02u</divetime>\n", divetime / 60, divetime % 60); // Parse the maxdepth. message ("Parsing the maxdepth.\n"); double maxdepth = 0.0; status = dc_parser_get_field (parser, DC_FIELD_MAXDEPTH, 0, &maxdepth); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the maxdepth."); goto cleanup; } fprintf (output->ostream, "<maxdepth>%.2f</maxdepth>\n", convert_depth(maxdepth, output->units)); // Parse the temperature. message ("Parsing the temperature.\n"); for (unsigned int i = 0; i < 3; ++i) { dc_field_type_t fields[] = {DC_FIELD_TEMPERATURE_SURFACE, DC_FIELD_TEMPERATURE_MINIMUM, DC_FIELD_TEMPERATURE_MAXIMUM}; const char *names[] = {"surface", "minimum", "maximum"}; double temperature = 0.0; status = dc_parser_get_field (parser, fields[i], 0, &temperature); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the temperature."); goto cleanup; } if (status != DC_STATUS_UNSUPPORTED) { fprintf (output->ostream, "<temperature type=\"%s\">%.1f</temperature>\n", names[i], convert_temperature(temperature, output->units)); } } // Parse the gas mixes. message ("Parsing the gas mixes.\n"); unsigned int ngases = 0; status = dc_parser_get_field (parser, DC_FIELD_GASMIX_COUNT, 0, &ngases); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the gas mix count."); goto cleanup; } for (unsigned int i = 0; i < ngases; ++i) { dc_gasmix_t gasmix = {0}; status = dc_parser_get_field (parser, DC_FIELD_GASMIX, i, &gasmix); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the gas mix."); goto cleanup; } fprintf (output->ostream, "<gasmix>\n" " <he>%.1f</he>\n" " <o2>%.1f</o2>\n" " <n2>%.1f</n2>\n" "</gasmix>\n", gasmix.helium * 100.0, gasmix.oxygen * 100.0, gasmix.nitrogen * 100.0); } // Parse the tanks. message ("Parsing the tanks.\n"); unsigned int ntanks = 0; status = dc_parser_get_field (parser, DC_FIELD_TANK_COUNT, 0, &ntanks); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the tank count."); goto cleanup; } for (unsigned int i = 0; i < ntanks; ++i) { const char *names[] = {"none", "metric", "imperial"}; dc_tank_t tank = {0}; status = dc_parser_get_field (parser, DC_FIELD_TANK, i, &tank); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the tank."); goto cleanup; } fprintf (output->ostream, "<tank>\n"); if (tank.gasmix != DC_GASMIX_UNKNOWN) { fprintf (output->ostream, " <gasmix>%u</gasmix>\n", tank.gasmix); } if (tank.type != DC_TANKVOLUME_NONE) { fprintf (output->ostream, " <type>%s</type>\n" " <volume>%.1f</volume>\n" " <workpressure>%.2f</workpressure>\n", names[tank.type], convert_volume(tank.volume, output->units), convert_pressure(tank.workpressure, output->units)); } fprintf (output->ostream, " <beginpressure>%.2f</beginpressure>\n" " <endpressure>%.2f</endpressure>\n" "</tank>\n", convert_pressure(tank.beginpressure, output->units), convert_pressure(tank.endpressure, output->units)); } // Parse the dive mode. message ("Parsing the dive mode.\n"); dc_divemode_t divemode = DC_DIVEMODE_OC; status = dc_parser_get_field (parser, DC_FIELD_DIVEMODE, 0, &divemode); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the dive mode."); goto cleanup; } if (status != DC_STATUS_UNSUPPORTED) { const char *names[] = {"freedive", "gauge", "oc", "ccr", "scr"}; fprintf (output->ostream, "<divemode>%s</divemode>\n", names[divemode]); } // Parse the salinity. message ("Parsing the salinity.\n"); dc_salinity_t salinity = {DC_WATER_FRESH, 0.0}; status = dc_parser_get_field (parser, DC_FIELD_SALINITY, 0, &salinity); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the salinity."); goto cleanup; } if (status != DC_STATUS_UNSUPPORTED) { fprintf (output->ostream, "<salinity type=\"%u\">%.1f</salinity>\n", salinity.type, salinity.density); } // Parse the atmospheric pressure. message ("Parsing the atmospheric pressure.\n"); double atmospheric = 0.0; status = dc_parser_get_field (parser, DC_FIELD_ATMOSPHERIC, 0, &atmospheric); if (status != DC_STATUS_SUCCESS && status != DC_STATUS_UNSUPPORTED) { ERROR ("Error parsing the atmospheric pressure."); goto cleanup; } if (status != DC_STATUS_UNSUPPORTED) { fprintf (output->ostream, "<atmospheric>%.5f</atmospheric>\n", convert_pressure(atmospheric, output->units)); } // Parse the sample data. message ("Parsing the sample data.\n"); status = dc_parser_samples_foreach (parser, sample_cb, &sampledata); if (status != DC_STATUS_SUCCESS) { ERROR ("Error parsing the sample data."); goto cleanup; } cleanup: if (sampledata.nsamples) fprintf (output->ostream, "</sample>\n"); fprintf (output->ostream, "</dive>\n"); return status; }