static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
if (controller_nr == 0) {
if (cpu_is_omap7xx()) {
omap_cfg_reg(MMC_7XX_CMD);
omap_cfg_reg(MMC_7XX_CLK);
omap_cfg_reg(MMC_7XX_DAT0);
} else {
omap_cfg_reg(MMC_CMD);
omap_cfg_reg(MMC_CLK);
omap_cfg_reg(MMC_DAT0);
}
if (cpu_is_omap1710()) {
omap_cfg_reg(M15_1710_MMC_CLKI);
omap_cfg_reg(P19_1710_MMC_CMDDIR);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
omap_cfg_reg(MMC_DAT1);
/* */
if (!mmc_controller->slots[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
/* */
if (cpu_is_omap16xx() && controller_nr == 1) {
if (!mmc_controller->slots[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
if (mmc_controller->slots[1].wires == 4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
}
/* */
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
}
/* */
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
}
}
static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
if (controller_nr == 0) {
if (cpu_is_omap7xx()) {
omap_cfg_reg(MMC_7XX_CMD);
omap_cfg_reg(MMC_7XX_CLK);
omap_cfg_reg(MMC_7XX_DAT0);
} else {
omap_cfg_reg(MMC_CMD);
omap_cfg_reg(MMC_CLK);
omap_cfg_reg(MMC_DAT0);
}
if (cpu_is_omap1710()) {
omap_cfg_reg(M15_1710_MMC_CLKI);
omap_cfg_reg(P19_1710_MMC_CMDDIR);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
if (!mmc_controller->slots[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
/* Block 2 is on newer chips, and has many pinout options */
if (cpu_is_omap16xx() && controller_nr == 1) {
if (!mmc_controller->slots[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
if (mmc_controller->slots[1].wires == 4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
}
/* These are needed for the level shifter */
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
}
/* Feedback clock must be set on OMAP-1710 MMC2 */
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
}
}
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_sram(void)
{
omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
else if (cpu_is_omap243x())
omap_sram_size = 0x10000; /* 64K */
}
}
} else {
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1611() ||
cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
}
static u32 __init omap_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
if (nwires != 6 && !cpu_is_omap15xx())
USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
if (nwires == 0)
return 0;
/* external transceiver */
omap_cfg_reg(USB1_TXD);
omap_cfg_reg(USB1_TXEN);
if (cpu_is_omap15xx()) {
omap_cfg_reg(USB1_SEO);
omap_cfg_reg(USB1_SPEED);
// SUSP
} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
omap_cfg_reg(W13_1610_USB1_SE0);
omap_cfg_reg(R13_1610_USB1_SPEED);
// SUSP
} else if (cpu_is_omap1710()) {
omap_cfg_reg(R13_1710_USB1_SE0);
// SUSP
} else {
pr_debug("usb unrecognized\n");
}
if (nwires != 3)
omap_cfg_reg(USB1_RCV);
switch (nwires) {
case 3:
syscon1 = 2;
break;
case 4:
syscon1 = 1;
break;
case 6:
syscon1 = 3;
omap_cfg_reg(USB1_VP);
omap_cfg_reg(USB1_VM);
if (!cpu_is_omap15xx())
USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
break;
default:
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
1, nwires);
}
return syscon1 << 20;
}
/*
* The amount of SRAM depends on the core type:
* 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
void __init omap_detect_sram(void)
{
omap_sram_base = OMAP1_SRAM_BASE;
if (cpu_is_omap730())
omap_sram_size = 0x32000;
else if (cpu_is_omap1510())
omap_sram_size = 0x80000;
else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000;
else if (cpu_is_omap1611())
omap_sram_size = 0x3e800;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size);
omap_sram_ceil = omap_sram_base + omap_sram_size;
}
static void __init _omap_map_io(void)
{
initialized = 1;
/* We have to initialize the IO space mapping before we can run
* cpu_is_omapxxx() macros. */
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
omap_check_revision();
#ifdef CONFIG_ARCH_OMAP730
if (cpu_is_omap730()) {
iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP1510
if (cpu_is_omap1510()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (cpu_is_omap1610() || cpu_is_omap1710()) {
iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
}
if (cpu_is_omap5912()) {
iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
}
#endif
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
/* Must init clocks early to assure that timer interrupt works
*/
clk_init();
}
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_sram(void)
{
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
} else {
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_START_PA;
omap_sram_size = OMAP4_SRAM_SIZE; /* 56KB */
omap_sram_size -= OMAP4_SRAM_HS_RESERVE;
omap_sram_start += OMAP4_SRAM_HS_RESERVE;
} else if (cpu_is_omap54xx()) {
omap_sram_start = OMAP4_SRAM_START_PA;
omap_sram_size = OMAP5_SRAM_SIZE; /* 128KB */
omap_sram_size -= OMAP5_SRAM_HS_RESERVE;
omap_sram_start += OMAP5_SRAM_HS_RESERVE;
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_START_PA;
omap_sram_size = OMAP4_SRAM_SIZE; /* 56K */
omap_sram_size -= OMAP4_SRAM_GP_RESERVE;
omap_sram_start += OMAP4_SRAM_GP_RESERVE;
} else if (cpu_is_omap54xx()) {
omap_sram_start = OMAP4_SRAM_START_PA;
omap_sram_size = OMAP5_SRAM_SIZE; /* 128KB */
omap_sram_size -= OMAP5_SRAM_GP_RESERVE;
omap_sram_start += OMAP5_SRAM_GP_RESERVE;
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
else if (cpu_is_omap243x())
omap_sram_size = 0x10000; /* 64K */
}
}
} else {
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1611() ||
cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
}
static u32 __init omap_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
l &= ~CONF_USB1_UNI_R;
omap_writel(l, USB_TRANSCEIVER_CTRL);
}
if (cpu_is_omap24xx())
omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
if (nwires == 0)
return 0;
/* external transceiver */
if (cpu_class_is_omap1()) {
omap_cfg_reg(USB1_TXD);
omap_cfg_reg(USB1_TXEN);
if (nwires != 3)
omap_cfg_reg(USB1_RCV);
}
if (cpu_is_omap15xx()) {
omap_cfg_reg(USB1_SEO);
omap_cfg_reg(USB1_SPEED);
// SUSP
} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
omap_cfg_reg(W13_1610_USB1_SE0);
omap_cfg_reg(R13_1610_USB1_SPEED);
// SUSP
} else if (cpu_is_omap1710()) {
omap_cfg_reg(R13_1710_USB1_SE0);
// SUSP
} else if (cpu_is_omap24xx()) {
/* NOTE: board-specific code must set up pin muxing for usb1,
* since each signal could come out on either of two balls.
*/
} else {
pr_debug("usb%d cpu unrecognized\n", 1);
return 0;
}
switch (nwires) {
case 2:
if (!cpu_is_omap24xx())
goto bad;
/* NOTE: board-specific code must override this setting if
* this TLL link is not using DP/DM
*/
syscon1 = 1;
omap2_usb_devconf_set(1, USB_BIDIR_TLL);
break;
case 3:
syscon1 = 2;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 4:
syscon1 = 1;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 6:
if (cpu_is_omap24xx())
goto bad;
syscon1 = 3;
omap_cfg_reg(USB1_VP);
omap_cfg_reg(USB1_VM);
if (!cpu_is_omap15xx()) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
l |= CONF_USB1_UNI_R;
omap_writel(l, USB_TRANSCEIVER_CTRL);
}
break;
default:
bad:
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
1, nwires);
}
return syscon1 << 20;
}
static u32 __init omap_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
l &= ~CONF_USB1_UNI_R;
omap_writel(l, USB_TRANSCEIVER_CTRL);
}
if (cpu_is_omap24xx())
omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
if (nwires == 0)
return 0;
if (cpu_class_is_omap1()) {
omap_cfg_reg(USB1_TXD);
omap_cfg_reg(USB1_TXEN);
if (nwires != 3)
omap_cfg_reg(USB1_RCV);
}
if (cpu_is_omap15xx()) {
omap_cfg_reg(USB1_SEO);
omap_cfg_reg(USB1_SPEED);
} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
omap_cfg_reg(W13_1610_USB1_SE0);
omap_cfg_reg(R13_1610_USB1_SPEED);
} else if (cpu_is_omap1710()) {
omap_cfg_reg(R13_1710_USB1_SE0);
} else if (cpu_is_omap24xx()) {
} else {
pr_debug("usb%d cpu unrecognized\n", 1);
return 0;
}
switch (nwires) {
case 2:
if (!cpu_is_omap24xx())
goto bad;
syscon1 = 1;
omap2_usb_devconf_set(1, USB_BIDIR_TLL);
break;
case 3:
syscon1 = 2;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 4:
syscon1 = 1;
if (cpu_is_omap24xx())
omap2_usb_devconf_set(1, USB_BIDIR);
break;
case 6:
if (cpu_is_omap24xx())
goto bad;
syscon1 = 3;
omap_cfg_reg(USB1_VP);
omap_cfg_reg(USB1_VM);
if (!cpu_is_omap15xx()) {
u32 l;
l = omap_readl(USB_TRANSCEIVER_CTRL);
l |= CONF_USB1_UNI_R;
omap_writel(l, USB_TRANSCEIVER_CTRL);
}
break;
default:
bad:
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
1, nwires);
}
return syscon1 << 20;
}
int __init omap1_clk_init(void)
{
struct omap_clk *c;
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
#ifdef CONFIG_DEBUG_LL
/*
* Resets some clocks that may be left on from bootloader,
* but leaves serial clocks on.
*/
omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
#endif
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap1710())
cpu_mask |= CK_1710;
if (cpu_is_omap16xx())
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
cpu_mask |= CK_1510;
if (cpu_is_omap7xx())
cpu_mask |= CK_7XX;
if (cpu_is_omap310())
cpu_mask |= CK_310;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
}
/* Pointers to these clocks are needed by code in clock.c */
api_ck_p = clk_get(NULL, "api_ck");
ck_dpll1_p = clk_get(NULL, "ck_dpll1");
ck_ref_p = clk_get(NULL, "ck_ref");
if (cpu_is_omap7xx())
ck_ref.rate = 13000000;
if (cpu_is_omap16xx() && crystal_type == 2)
ck_ref.rate = 19200000;
pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
/*
* Initially use the values set by bootloader. Determine PLL rate and
* recalculate dependent clocks as if kernel had changed PLL or
* divisors. See also omap1_clk_late_init() that can reprogram dpll1
* after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
if (pll_ctl_val & 0x10) {
/* PLL enabled, apply multiplier and divisor */
if (pll_ctl_val & 0xf80)
ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
} else {
/* PLL disabled, apply bypass divisor */
switch (pll_ctl_val & 0xc) {
case 0:
break;
case 0x4:
ck_dpll1.rate /= 2;
break;
default:
ck_dpll1.rate /= 4;
break;
}
}
}
static void __init omap_init_mmc(void)
{
const struct omap_mmc_config *mmc_conf;
const struct omap_mmc_conf *mmc;
/* NOTE: assumes MMC was never (wrongly) enabled */
mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
if (!mmc_conf)
return;
/* block 1 is always available and has just one pinout option */
mmc = &mmc_conf->mmc[0];
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
if (mmc->enabled)
(void) platform_device_register(&mmc_omap_device1);
#if defined(CONFIG_ARCH_OMAP243X) || defined(CONFIG_ARCH_OMAP34XX)
mmc = &mmc_conf->mmc[1];
if (mmc->enabled)
(void) platform_device_register(&mmc_omap_device2);
#endif
return;
}
if (mmc->enabled) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
omap_cfg_reg(G19_24XX_MMC_CLKO);
omap_cfg_reg(F20_24XX_MMC_DAT0);
omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
} else {
omap_cfg_reg(MMC_CMD);
omap_cfg_reg(MMC_CLK);
omap_cfg_reg(MMC_DAT0);
if (cpu_is_omap1710()) {
omap_cfg_reg(M15_1710_MMC_CLKI);
omap_cfg_reg(P19_1710_MMC_CMDDIR);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
}
if (mmc->wire4) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H14_24XX_MMC_DAT1);
omap_cfg_reg(E19_24XX_MMC_DAT2);
omap_cfg_reg(D19_24XX_MMC_DAT3);
omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
} else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
if (!mmc->nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
#if defined(CONFIG_ARCH_OMAP2420)
if (mmc->internal_clock) {
/*
* Use internal loop-back in MMC/SDIO
* Module Input Clock selection
*/
#ifdef CONFIG_ARCH_OMAP24XX
if (cpu_is_omap24xx()) {
u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24); /* not used in 243x */
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
#endif
}
#endif
mmc1_data.conf = *mmc;
(void) platform_device_register(&mmc_omap_device1);
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
mmc = &mmc_conf->mmc[1];
if (mmc->enabled) {
if (!mmc->nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
if (mmc->wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
}
/* These are needed for the level shifter */
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
}
/* Feedback clock must be set on OMAP-1710 MMC2 */
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
mmc2_data.conf = *mmc;
(void) platform_device_register(&mmc_omap_device2);
}
#endif
return;
}
static void __init omap_init_mmc(void)
{
const struct omap_mmc_config *mmc_conf;
const struct omap_mmc_conf *mmc;
/* NOTE: assumes MMC was never (wrongly) enabled */
mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
if (!mmc_conf)
return;
/* block 1 is always available and has just one pinout option */
mmc = &mmc_conf->mmc[0];
if (mmc->enabled) {
omap_cfg_reg(MMC_CMD);
omap_cfg_reg(MMC_CLK);
omap_cfg_reg(MMC_DAT0);
if (cpu_is_omap1710()) {
omap_cfg_reg(M15_1710_MMC_CLKI);
omap_cfg_reg(P19_1710_MMC_CMDDIR);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
if (mmc->wire4) {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
if (!mmc->nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
mmc1_conf = *mmc;
(void) platform_device_register(&mmc_omap_device1);
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
mmc = &mmc_conf->mmc[1];
if (mmc->enabled) {
if (!mmc->nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
if (mmc->wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
}
/* These are needed for the level shifter */
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
}
/* Feedback clock must be set on OMAP-1710 MMC2 */
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
mmc2_conf = *mmc;
(void) platform_device_register(&mmc_omap_device2);
}
#endif
return;
}
