Example #1
0
void initRunMode() {
	#if ENABLE_SLOTS
		setupSlots();
	#endif
	
	mcu_clearTimer();
	
	//TODO: Figure out that dest = destorig shit
	dest = destorig;
	
	#if !(ENABLE_SLOTS)
		queryReplyCRC = crc16_ccitt(&queryReply[0],2);
		queryReply[3] = (unsigned char) queryReplyCRC;
		queryReply[2] = (unsigned char) mcu_swapBytes(queryReplyCRC);
	#endif

	#if SENSOR_DATA_IN_ID
		// this branch is for sensor data in the id
		ackReply[2] = SENSOR_DATA_TYPE_ID;
		state = STATE_READ_SENSOR;
		timeToSample++;
	#else
		ackReplyCRC = crc16_ccitt(&ackReply[0], 14);
		ackReply[15] = (unsigned char) ackReplyCRC;
		ackReply[14] = (unsigned char) mcu_swapBytes(ackReplyCRC);
	#endif
	
	#if ENABLE_SESSIONS
		initialize_sessions();
	#endif

	state = STATE_READY;
}
Example #2
0
uint16_t XN297_UnscramblePayload(uint8_t *data, int len, const uint8_t *rxAddr)
{
    uint16_t crc = 0xb5d2;
    if (rxAddr) {
        for (int ii = 0; ii < RX_TX_ADDR_LEN; ++ii) {
            crc = crc16_ccitt(crc, rxAddr[RX_TX_ADDR_LEN - 1 - ii]);
        }
    }
    for (int ii = 0; ii < len; ++ii) {
        crc = crc16_ccitt(crc, data[ii]);
        data[ii] = bitReverse(data[ii] ^ xn297_data_scramble[ii]);
    }
    crc ^= xn297_crc_xorout[len];
    return crc;
}
Example #3
0
// Receive ISR callback
static void sumdDataReceive(uint16_t c, void *data)
{
    UNUSED(data);

    uint32_t sumdTime;
    static uint32_t sumdTimeLast;
    static uint8_t sumdIndex;

    sumdTime = micros();
    if ((sumdTime - sumdTimeLast) > 4000)
        sumdIndex = 0;
    sumdTimeLast = sumdTime;

    if (sumdIndex == 0) {
        if (c != SUMD_SYNCBYTE)
            return;
        else
        {
            sumdFrameDone = false; // lazy main loop didnt fetch the stuff
            crc = 0;
        }
    }
    if (sumdIndex == 2)
        sumdChannelCount = (uint8_t)c;
    if (sumdIndex < SUMD_BUFFSIZE)
        sumd[sumdIndex] = (uint8_t)c;
    sumdIndex++;
    if (sumdIndex < sumdChannelCount * 2 + 4)
        crc = crc16_ccitt(crc, (uint8_t)c);
    else
        if (sumdIndex == sumdChannelCount * 2 + 5) {
            sumdIndex = 0;
            sumdFrameDone = true;
        }
}
int
nffs_crc_flash(uint16_t initial_crc, uint8_t area_idx, uint32_t area_offset,
               uint32_t len, uint16_t *out_crc)
{
    uint32_t chunk_len;
    uint16_t crc;
    int rc;

    crc = initial_crc;

    /* Copy data in chunks small enough to fit in the flash buffer. */
    while (len > 0) {
        if (len > sizeof nffs_flash_buf) {
            chunk_len = sizeof nffs_flash_buf;
        } else {
            chunk_len = len;
        }

        rc = nffs_flash_read(area_idx, area_offset, nffs_flash_buf, chunk_len);
        if (rc != 0) {
            return rc;
        }

        crc = crc16_ccitt(crc, nffs_flash_buf, chunk_len);

        area_offset += chunk_len;
        len -= chunk_len;
    }

    *out_crc = crc;
    return 0;
}
Example #5
0
/*************************************************
* Function: AC_BuildMessage
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
void ICACHE_FLASH_ATTR
AC_BuildMessage(u8 u8MsgCode, u8 u8MsgId, 
    u8 *pu8Payload, u16 u16PayloadLen,
    AC_OptList *pstruOptList,
    u8 *pu8Msg, u16 *pu16Len)
{
    //协议组包函数
    ZC_MessageHead *pstruMsg = NULL;
    u16 u16OptLen = 0;
    u16 crc = 0;
    
    pstruMsg = (ZC_MessageHead *)pu8Msg;
    pstruMsg->MsgCode = u8MsgCode;
    pstruMsg->MsgId = u8MsgId;  

    pstruMsg->Version = 0;

    AC_BuildOption(pstruOptList, &pstruMsg->OptNum, (pu8Msg + sizeof(ZC_MessageHead)), &u16OptLen);
    memcpy((pu8Msg + sizeof(ZC_MessageHead) + u16OptLen), pu8Payload, u16PayloadLen);

    /*updata len*/
    pstruMsg->Payloadlen = ZC_HTONS(u16PayloadLen + u16OptLen);

    /*calc crc*/
    crc = crc16_ccitt((pu8Msg + sizeof(ZC_MessageHead)), (u16PayloadLen + u16OptLen));
    pstruMsg->TotalMsgCrc[0]=(crc&0xff00)>>8;
    pstruMsg->TotalMsgCrc[1]=(crc&0xff);


    *pu16Len = (u16)sizeof(ZC_MessageHead) + u16PayloadLen + u16OptLen;
}
Example #6
0
/*************************************************
* Function: ZC_StoreTokenKey
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
void ZC_StoreTokenKey(u8 *pu8Data)
{
    g_struZcConfigDb.struDeviceInfo.u32UnBcFlag = ZC_MAGIC_FLAG;   
    memcpy(g_struZcConfigDb.struCloudInfo.u8TokenKey, pu8Data, ZC_HS_SESSION_KEY_LEN);
    g_struZcConfigDb.u32Crc = crc16_ccitt(((u8 *)&g_struZcConfigDb) + 4, sizeof(g_struZcConfigDb) - 4);
    g_struProtocolController.pstruMoudleFun->pfunWriteFlash((u8*)&g_struZcConfigDb, sizeof(ZC_ConfigDB));
}
Example #7
0
/*
 * Write the configuration parameters to EEPROM
 */
void ConfigParms::commit(bool forced)
{
  if (_stationName[0] == '\0') {
    // It was probably not initialized.
    return;
  }
  if (!forced && !needCommit) {
    return;
  }

  //DIAGPRINTLN(F("ConfigParms::commit"));
  // Fill in the magic and CRC, and write to EEPROM
  const size_t crc_size = sizeof(uint16_t);
  const size_t magic_len = sizeof(magic);
  size_t size = magic_len + sizeof(*this) + crc_size;
  uint8_t buffer[size];

  strncpy_P((char *)buffer, magic, magic_len);
  memcpy(buffer + magic_len, (uint8_t *)this, sizeof(*this));
  uint16_t crc = crc16_ccitt(buffer, size - crc_size);
  *(uint16_t *)(buffer + size - crc_size) = crc;
  //dumpBuffer(buffer, size);

  eeprom_write_block((const void *)buffer, eepromAddr(), size);
  needCommit = false;
}
Example #8
0
/*
 * Read all of the config parameters from the EEPROM
 *
 * There are some sanity checks. If they fail then
 * it will call reset() instead.
 */
void ConfigParms::read()
{
  const size_t crc_size = sizeof(uint16_t);
  const size_t magic_len = sizeof(magic);
  size_t size = magic_len + sizeof(*this) + crc_size;
  uint8_t buffer[size];

  // Read the whole block from EEPROM in memory
  eeprom_read_block((void *)buffer, eepromAddr(), size);

  // Verify the checksum
  uint16_t crc = *(uint16_t *)(buffer + size - crc_size);
  uint16_t crc1 = crc16_ccitt(buffer, size - crc_size);

  if (strncmp_P((const char *)buffer, magic, magic_len) != 0) {
    //DIAGPRINTLN(F("ConfigParms::read - magic wrong"));
    goto do_reset;
  }
  if (crc != crc1) {
    goto do_reset;
  }

  // Initialize the ConfigParms instance with the info from EEPROM
  memcpy((uint8_t *)this, buffer + magic_len, sizeof(*this));
  return;

do_reset:
  reset();
}
Example #9
0
/*************************************************
* Function: ZC_ConfigReset
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
void ZC_ConfigReset()
{
    g_struZcConfigDb.struSwitchInfo.u32ServerAddrConfig = 0;            
    g_struZcConfigDb.struDeviceInfo.u32UnBcFlag = 0xFFFFFFFF;
    g_struZcConfigDb.u32Crc = crc16_ccitt(((u8 *)&g_struZcConfigDb) + 4, sizeof(g_struZcConfigDb) - 4);    
    g_struProtocolController.pstruMoudleFun->pfunWriteFlash((u8 *)&g_struZcConfigDb, sizeof(ZC_ConfigDB));
    g_struProtocolController.pstruMoudleFun->pfunRest();
}
Example #10
0
/*************************************************
* Function: ZC_StoreConnectionInfo
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
void ZC_StoreConnectionInfo(u8 *pu8Ssid, u8 *pu8Password)
{
    g_struZcConfigDb.struConnection.u32MagicFlag = ZC_MAGIC_FLAG;
    memcpy(g_struZcConfigDb.struConnection.u8Ssid, pu8Ssid, ZC_SSID_MAX_LEN);
    memcpy(g_struZcConfigDb.struConnection.u8Password, pu8Password, ZC_PASSWORD_MAX_LEN);
    g_struZcConfigDb.u32Crc = crc16_ccitt(((u8 *)&g_struZcConfigDb) + 4, sizeof(g_struZcConfigDb) - 4);
    g_struProtocolController.pstruMoudleFun->pfunWriteFlash((u8*)&g_struZcConfigDb, sizeof(ZC_ConfigDB));
}
Example #11
0
/*
  get CRC for a block
 */
uint16_t AP_Terrain::get_block_crc(struct grid_block &block)
{
    uint16_t saved_crc = block.crc;
    block.crc = 0;
    uint16_t ret = crc16_ccitt((const uint8_t *)&block, sizeof(block), 0);
    block.crc = saved_crc;
    return ret;
}
Example #12
0
void crc16_ccitt_wd_buf(const uint8_t *in, uint len,
			uint8_t *out, uint chunk_sz)
{
	uint16_t crc;

	crc = crc16_ccitt(0, in, len);
	crc = htons(crc);
	memcpy(out, &crc, sizeof(crc));
}
Example #13
0
static int l_crc16(lua_State *L)
{
    size_t size;
    const char *p_str = luaL_checklstring(L, 1, &size);

    uint16_t retval = crc16_ccitt( (uint8_t*) p_str, size);
    lua_pushinteger(L, (int) retval);
    return 1;
}
static uint16_t
nffs_crc_disk_inode_hdr(const struct nffs_disk_inode *disk_inode)
{
    uint16_t crc;

    crc = crc16_ccitt(0, disk_inode, NFFS_DISK_INODE_OFFSET_CRC);

    return crc;
}
uint16_t
nffs_crc_disk_block_hdr(const struct nffs_disk_block *disk_block)
{
    uint16_t crc;

    crc = crc16_ccitt(0, disk_block, NFFS_DISK_BLOCK_OFFSET_CRC);

    return crc;
}
Example #16
0
/*************************************************
* Function: ZC_StoreConnectionInfo
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
void ZC_StoreAccessInfo(u8 *pu8ServerIp, u8 *pu8ServerPort)
{
    g_struZcConfigDb.struConnection.u32MagicFlag = ZC_MAGIC_FLAG;
    g_struZcConfigDb.struSwitchInfo.u32ServerAddrConfig = 1;
    memcpy(&g_struZcConfigDb.struSwitchInfo.u32ServerIp, pu8ServerIp, ZC_SERVER_ADDR_MAX_LEN);
    memcpy(&g_struZcConfigDb.struSwitchInfo.u16ServerPort, pu8ServerPort, ZC_SERVER_PORT_MAX_LEN);
    g_struZcConfigDb.u32Crc = crc16_ccitt(((u8 *)&g_struZcConfigDb) + 4, sizeof(g_struZcConfigDb) - 4);
    g_struProtocolController.pstruMoudleFun->pfunWriteFlash((u8*)&g_struZcConfigDb, sizeof(ZC_ConfigDB));
}
Example #17
0
uint8_t XN297_WritePayload(uint8_t *data, int len, const uint8_t *rxAddr)
{
    uint8_t packet[NRF24L01_MAX_PAYLOAD_SIZE];
    uint16_t crc = 0xb5d2;
    for (int ii = 0; ii < RX_TX_ADDR_LEN; ++ii) {
        packet[ii] = rxAddr[RX_TX_ADDR_LEN - 1 - ii];
        crc = crc16_ccitt(crc, packet[ii]);
    }
    for (int ii = 0; ii < len; ++ii) {
        const uint8_t bOut = bitReverse(data[ii]);
        packet[ii + RX_TX_ADDR_LEN] = bOut ^ xn297_data_scramble[ii];
        crc = crc16_ccitt(crc, packet[ii + RX_TX_ADDR_LEN]);
    }
    crc ^= xn297_crc_xorout[len];
    packet[RX_TX_ADDR_LEN + len] = crc >> 8;
    packet[RX_TX_ADDR_LEN + len + 1] = crc & 0xff;
    return NRF24L01_WritePayload(packet, RX_TX_ADDR_LEN + len + 2);
}
Example #18
0
void crc16_ccitt_sbuf_append(sbuf_t *dst, uint8_t *start)
{
    uint16_t crc = 0;
    const uint8_t * const end = sbufPtr(dst);
    for (const uint8_t *ptr = start; ptr < end; ++ptr) {
        crc = crc16_ccitt(crc, *ptr);
    }
    sbufWriteU16(dst, crc);
}
Example #19
0
guint16 crc16_ccitt_tvb_offset(tvbuff_t *tvb, guint offset, guint len)
{
    const guint8 *buf;

    tvb_ensure_bytes_exist(tvb, offset, len);  /* len == -1 not allowed */
    buf = tvb_get_ptr(tvb, offset, len);

    return crc16_ccitt(buf, len);
}
Example #20
0
inline void crc16_ccitt_readReply(unsigned int numDataBytes)
{

  // shift everything over by 1 to accomodate leading "0" bit.
  // first, grab address of beginning of array
  readReply[numDataBytes + 2] = 0; // clear out this spot for the loner bit of
                                   // handle
  readReply[numDataBytes + 4] = 0; // clear out this spot for the loner bit of
                                   // crc
  bits = (unsigned short) &readReply[0];
  // shift all bytes and later use only data + handle
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  asm("RRC.b @R5+");
  // store loner bit in array[numDataBytes+2] position
  asm("RRC.b @R5+");
  // make first bit 0
  readReply[0] &= 0x7f;

  // compute crc on data + handle bytes
  readReplyCRC = crc16_ccitt(&readReply[0], numDataBytes + 2);
  readReply[numDataBytes + 4] = readReply[numDataBytes + 2];
  // XOR the MSB of CRC with loner bit.
  readReply[numDataBytes + 4] ^= __swap_bytes(readReplyCRC); // XOR happens with
                                                             // MSB of lower
                                                             // nibble
  // Just take the resulting bit, not the whole byte
  readReply[numDataBytes + 4] &= 0x80;

  unsigned short mask = __swap_bytes(readReply[numDataBytes + 4]);
  mask >>= 3;
  mask |= (mask >> 7);
  mask ^= 0x1020;
  mask >>= 1;  // this is because the loner bit pushes the CRC to the left by 1
  // but we don't shift the crc because it should get pushed out by 1 anyway
  readReplyCRC ^= mask;

  readReply[numDataBytes + 3] = (unsigned char) readReplyCRC;
  readReply[numDataBytes + 2] |= (unsigned char) (__swap_bytes(readReplyCRC) &
          0x7F);
}
void
nffs_crc_disk_block_fill(struct nffs_disk_block *disk_block, const void *data)
{
    uint16_t crc16;

    crc16 = nffs_crc_disk_block_hdr(disk_block);
    crc16 = crc16_ccitt(crc16, data, disk_block->ndb_data_len);

    disk_block->ndb_crc16 = crc16;
}
Example #22
0
uint16_t crc16_ccitt_update(uint16_t crc, const void *data, uint32_t length)
{
    const uint8_t *p = (const uint8_t *)data;
    const uint8_t *pend = p + length;

    for (; p != pend; p++) {
        crc = crc16_ccitt(crc, *p);
    }
    return crc;
}
void
nffs_crc_disk_inode_fill(struct nffs_disk_inode *disk_inode,
                         const char *filename)
{
    uint16_t crc16;

    crc16 = nffs_crc_disk_inode_hdr(disk_inode);
    crc16 = crc16_ccitt(crc16, filename, disk_inode->ndi_filename_len);

    disk_inode->ndi_crc16 = crc16;
}
Example #24
0
/** Send SBP messages.
 * Takes an SBP message payload, type and sender ID then writes a message to
 * the output stream using the supplied `write` function with the correct
 * framing and CRC.
 *
 * The supplied `write` function must have the prototype:
 *
 * ~~~
 * u32 write(u8 *buff, u32 n, void* context)
 * ~~~
 *
 * where `n` is the number of bytes to be written and `buff` is the buffer from
 * which to read the data to be written, and `context` is the arbitrary pointer
 * set by `sbp_state_set_io_context`. The function should return the number
 * of bytes successfully written which may be between 0 and `n`. Currently, if
 * the number of bytes written is different from `n` then `sbp_send_message`
 * will immediately return with an error.
 *
 * Note that `sbp_send_message` makes multiple calls to write and therefore if
 * a `write` call fails then this may result in a partial message being written
 * to the output. This should be caught by the CRC check on the receiving end
 * but will result in lost messages.
 *
 * \param write Function pointer to a function that writes `n` bytes from
 *              `buff` to the output stream  and returns the number of bytes
 *              successfully written.
 * \return `SBP_OK` (0) if successful, `SBP_WRITE_ERROR` if the message could
 *         not be sent or was only partially sent.
 */
s8 sbp_send_message(sbp_state_t *s, u16 msg_type, u16 sender_id, u8 len, u8 *payload,
                    u32 (*write)(u8 *buff, u32 n, void *context))
{
  /* Check our payload data pointer isn't NULL unless len = 0. */
  if (len != 0 && payload == 0)
    return SBP_NULL_ERROR;

  /* Check our write function pointer isn't NULL. */
  if (write == 0)
    return SBP_NULL_ERROR;

  u16 crc;

  u8 preamble = SBP_PREAMBLE;
  if ((*write)(&preamble, 1, s->io_context) != 1)
    return SBP_SEND_ERROR;

  if ((*write)((u8*)&msg_type, 2, s->io_context) != 2)
    return SBP_SEND_ERROR;

  if ((*write)((u8*)&sender_id, 2, s->io_context) != 2)
    return SBP_SEND_ERROR;

  if ((*write)(&len, 1, s->io_context) != 1)
    return SBP_SEND_ERROR;

  if (len > 0) {
    if ((*write)(payload, len, s->io_context) != len)
      return SBP_SEND_ERROR;
  }

  crc = crc16_ccitt((u8*)&(msg_type), 2, 0);
  crc = crc16_ccitt((u8*)&(sender_id), 2, crc);
  crc = crc16_ccitt(&(len), 1, crc);
  crc = crc16_ccitt(payload, len, crc);

  if ((*write)((u8*)&crc, 2, s->io_context) != 2)
    return SBP_SEND_ERROR;

  return SBP_OK;
}
/*************************************************
* Function: PCT_ModuleOtaFileChunkMsg
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
void PCT_ModuleOtaFileChunkMsg(PTC_ProtocolCon *pstruContoller, ZC_MessageHead *pstruMsg, u8 *pu8Msg)
{
    ZC_OtaFileChunkReq *pstruOta;
    u32 u32FileLen;
    u32 u32RetVal;
    u32 u32RecvOffset;
    u16 u16CalCrc;
    u16 u16RecvCrc;

    ZC_Printf("Ota File Chunk\n");
    
    pstruOta = (ZC_OtaFileChunkReq *)(pu8Msg);
    u32FileLen = ZC_HTONS(pstruMsg->Payloadlen) - sizeof(ZC_OtaFileChunkReq);
    u32RecvOffset = ZC_HTONL(pstruOta->u32Offset);
    
    /*check para*/
    if ((u32RecvOffset != pstruContoller->struOtaInfo.u32RecvOffset)
        || ((u32RecvOffset + u32FileLen) > pstruContoller->struOtaInfo.u32TotalLen)
      || (u32FileLen > ZC_OTA_MAX_CHUNK_LEN))
    {
        ZC_Printf("recv error %d,%d,%d,%d,\n", u32RecvOffset, 
            pstruContoller->struOtaInfo.u32RecvOffset,
            pstruContoller->struOtaInfo.u32TotalLen,
            u32FileLen);
        PCT_SendNotifyMsg(ZC_CODE_ERR);
        return;
    }
    //Check CRC
    u16CalCrc = crc16_ccitt((u8*)(pstruOta), ZC_HTONS(pstruMsg->Payloadlen));
    u16RecvCrc = (pstruMsg->TotalMsgCrc[0] << 8) + pstruMsg->TotalMsgCrc[1];

    if (u16CalCrc != u16RecvCrc)
    {
        PCT_SendNotifyMsg(ZC_CODE_ERR);
        return;
    }
 
    u32RetVal = pstruContoller->pstruMoudleFun->pfunUpdate((u8*)(pstruOta + 1), u32RecvOffset, u32FileLen);
    //u32RetVal = ZC_RET_OK;
    ZC_Printf("offset = %d, len = %d\n", u32RecvOffset, u32FileLen);

    if (ZC_RET_ERROR == u32RetVal)
    {
        ZC_Printf("OTA Fail\n");
        PCT_SendNotifyMsg(ZC_CODE_ERR);
        return;
    }

    /*update file offset*/
    pstruContoller->struOtaInfo.u32RecvOffset = pstruContoller->struOtaInfo.u32RecvOffset + u32FileLen;
    PCT_SendNotifyMsg(ZC_CODE_ACK);
}
Example #26
0
static int
nffs_write_fill_crc16_overwrite(struct nffs_disk_block *disk_block,
                                uint8_t src_area_idx, uint32_t src_area_offset,
                                uint16_t left_copy_len, uint16_t right_copy_len,
                                const void *new_data, uint16_t new_data_len)
{
    uint16_t block_off;
    uint16_t crc16;
    int rc;

    block_off = 0;

    crc16 = nffs_crc_disk_block_hdr(disk_block);
    block_off += sizeof *disk_block;

    /* Copy data from the start of the old block, in case the new data starts
     * at a non-zero offset.
     */
    if (left_copy_len > 0) {
        rc = nffs_crc_flash(crc16, src_area_idx, src_area_offset + block_off,
                            left_copy_len, &crc16);
        if (rc != 0) {
            return rc;
        }
        block_off += left_copy_len;
    }

    /* Write the new data into the data block.  This may extend the block's
     * length beyond its old value.
     */
    crc16 = crc16_ccitt(crc16, new_data, new_data_len);
    block_off += new_data_len;

    /* Copy data from the end of the old block, in case the new data doesn't
     * extend to the end of the block.
     */
    if (right_copy_len > 0) {
        rc = nffs_crc_flash(crc16, src_area_idx, src_area_offset + block_off,
                            right_copy_len, &crc16);
        if (rc != 0) {
            return rc;
        }
        block_off += right_copy_len;
    }

    assert(block_off == sizeof *disk_block + disk_block->ndb_data_len);

    disk_block->ndb_crc16 = crc16;

    return 0;
}
Example #27
0
int stream_next_bit(struct stream *s)
{
    int b;
    if (s->nr_index >= 5)
        return -1;
    s->index_offset++;
    if ((b = s->type->next_bit(s)) == -1)
        return -1;
    s->word = (s->word << 1) | b;
    if (++s->crc_bitoff == 16) {
        uint8_t b = mfm_decode_bits(bc_mfm, s->word);
        s->crc16_ccitt = crc16_ccitt(&b, 1, s->crc16_ccitt);
        s->crc_bitoff = 0;
    }
    return b;
}
Example #28
0
void printDebugPacket() {
    u16 crc = crc16_ccitt(pktbuf, 6);
    SSN = LOW;
    setCursor(1, 30);
    printf("%02x %02x %02x %02x", pktbuf[0], pktbuf[1], pktbuf[2], pktbuf[3]);
    setCursor(2, 30);
    printf("%02x %02x %02x %02x", pktbuf[4], pktbuf[5], pktbuf[6], pktbuf[7]);
    setCursor(3, 24);
    printf("%04x", crc);
    setCursor(4, 24);
    printf("%3u ", pktbuf[9]);
    setCursor(5, 30);
    printf("%3u ", pktbuf[8]);
    setCursor(6, 42);
    printf("%3u ", pktbuf[10]);
    SSN= HIGH;
}
/*************************************************
* Function: PCT_CheckCrc
* Description: 
* Author: cxy 
* Returns: 
* Parameter: 
* History:
*************************************************/
u32 PCT_CheckCrc(u8 *pu8Crc, u8 *pu8Data, u16 u16Len)
{
    u16 u16Crc;
    u16 u16RecvCrc;
    u16Crc = crc16_ccitt(pu8Data, u16Len);
    u16RecvCrc = (pu8Crc[0] << 8) + pu8Crc[1];
    if (u16Crc == u16RecvCrc)
    {
        return ZC_RET_OK;
    }
    else
    {
        ZC_Printf("Crc is error, recv = %d, calc = %d\n", u16RecvCrc, u16Crc);    
        
        return ZC_RET_ERROR;    
    }
}
Example #30
0
void assemblyPacket(packet_type_e command, const packet_data_u *data, uint8_t packet[MAX_PACKET_SIZE], uint8_t *packetSize)
{
    //  Fill header
    packet_header *header = (packet_header *)packet;
    memset(header, 0x00, HEADER_LENGTH);

    header->preamble = PREAMBLE;
    header->direction = DIRECTION_FROM_DEVICE;
    header->encrypted = ENCRYPTION_OFF;
    header->type = command;
    header->reserved = 0xFFFFFFFF;

    //  Copy data in packet
    uint8_t *dataField = &packet[10];
    unsigned int dataFieldSize = 0;

    switch (command) {
    case GET_DEVICE_ID:
        dataFieldSize = 8;
        memcpy(dataField, data->device_id, dataFieldSize);
        break;
    case GET_STATUS: {
        dataFieldSize = sizeof(device_status_s);
        memcpy(dataField, &data->device_status, dataFieldSize);
        break;
    }
    case GET_BUTTONS_STATE:
        dataFieldSize = 3 * sizeof(button_state_s);
        memcpy(dataField, data->buttons_state, dataFieldSize);
        break;
    default:
        *packetSize = 0;
        return;
    }

    //  Calculate packet size
    header->length = 6 + dataFieldSize;
    *packetSize = 4 + header->length + CRC_LEN;
    
    //  Calculate CRC over: length, encrypted, type, reserved, data
    uint16_t crc;
    crc = crc16_ccitt(&packet[2], (2 + header->length));
    memcpy(packet + HEADER_LENGTH + dataFieldSize, &crc, CRC_LEN);
}