int __init pbXX_simple_config_init(void)
{
#if AR7100_JUMPSTART_SWITCH_WORKS
#ifdef CONFIG_CUS100
u32 mask = 0;
#endif
int req;
#ifdef CONFIG_CUS100
mask = ar7100_reg_rd(AR7100_MISC_INT_MASK);
ar7100_reg_wr(AR7100_MISC_INT_MASK, mask | (1 << 2)); /* Enable GPIO interrupt mask */
ar7100_gpio_config_int (JUMPSTART_GPIO, INT_TYPE_LEVEL,INT_POL_ACTIVE_HIGH);
ar7100_gpio_intr_enable(JUMPSTART_GPIO);
ar7100_gpio_config_input(JUMPSTART_GPIO);
#else
/* configure GPIO 3 as level triggered interrupt */
ar7100_gpio_config_int (JUMPSTART_GPIO, INT_TYPE_LEVEL,INT_POL_ACTIVE_HIGH);
printk("%s (%s) JUMPSTART_GPIO: %d\n", __FILE__, __func__, JUMPSTART_GPIO);
#endif
req = request_irq (AR7100_GPIO_IRQn(JUMPSTART_GPIO), jumpstart_irq, 0,
"SW JUMPSTART", NULL);
if (req != 0) {
printk (KERN_ERR "unable to request IRQ for SWJUMPSTART GPIO (error %d)\n", req);
}
create_simple_config_led_proc_entry ();
#endif // AR7100_JUMPSTART_SWITCH_WORKS
return 0;
}
int __init ath_simple_config_init(void)
{
#if 0
#ifdef CONFIG_CUS100
u32 mask = 0;
#endif
int req, ret;
ret = misc_register(&athfr_miscdev);
if (ret < 0) {
printk("*** ath misc_register failed %d *** \n", ret);
return -1;
}
#ifdef CONFIG_CUS100
mask = ath_reg_rd(ATH_MISC_INT_MASK);
ath_reg_wr(ATH_MISC_INT_MASK, mask | (1 << 2));
ath_gpio_config_int(JUMPSTART_GPIO, INT_TYPE_LEVEL,
INT_POL_ACTIVE_HIGH);
ath_gpio_intr_enable(JUMPSTART_GPIO);
ath_gpio_config_input(JUMPSTART_GPIO);
#else
ath_gpio_config_input(JUMPSTART_GPIO);
/* configure Jumpstart GPIO as level triggered interrupt */
ath_gpio_config_int(JUMPSTART_GPIO, INT_TYPE_LEVEL,
INT_POL_ACTIVE_LOW);
printk("%s JUMPSTART_GPIO: %d\n", __func__, JUMPSTART_GPIO);
#ifndef CONFIG_MACH_AR934x
ath_reg_rmw_clear(ATH_GPIO_FUNCTIONS, (1 << 2));
ath_reg_rmw_clear(ATH_GPIO_FUNCTIONS, (1 << 16));
ath_reg_rmw_clear(ATH_GPIO_FUNCTIONS, (1 << 20));
#endif
#endif
req = request_irq(ATH_GPIO_IRQn(JUMPSTART_GPIO), jumpstart_irq, 0,
"SW JUMPSTART/FACTORY RESET", NULL);
if (req != 0) {
printk("request_irq for jumpstart failed (error %d)\n", req);
misc_deregister(&athfr_miscdev);
ath_gpio_intr_shutdown(ATH_GPIO_IRQn(JUMPSTART_GPIO));
return -1;
}
#if !defined(CONFIG_I2S) && defined(AP_USB_LED_GPIO)
ath_gpio_config_output(AP_USB_LED_GPIO);
#endif
init_waitqueue_head(&ath_fr_wq);
#endif
create_simple_config_led_proc_entry();
return 0;
}
int __init pbXX_simple_config_init(void)
{
#ifdef JUMPSTART
int req;
/* configure GPIO 3 as level triggered interrupt */
ar7100_gpio_config_int(JUMPSTART_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_HIGH);
req = request_irq(AR7100_GPIO_IRQn(JUMPSTART_GPIO), jumpstart_irq, 0, "SW JUMPSTART", NULL);
if (req != 0) {
printk(KERN_ERR "unable to request IRQ for SWJUMPSTART GPIO (error %d)\n", req);
}
#endif
create_simple_config_led_proc_entry();
return 0;
}
int __init ar7240_simple_config_init(void)
{
int req;
/* restore factory default and system led */
dev_t dev;
int rt;
int ar7240_gpio_major = gpio_major;
int ar7240_gpio_minor = gpio_minor;
init_timer(&rst_timer);
rst_timer.function = check_rst;
#ifdef CONFIG_PID_MR302001
printk("\n\nWhoops! This kernel is for product mr3020 v1.0!\n\n");
#endif
#ifdef CONFIG_PID_WR74104
printk("\n\nWhoops! This kernel is for product wr741 v4.0!\n\n");
#endif
#ifdef CONFIG_PID_MR322001
printk("\n\nWhoops! This kernel is for product mr3220 v1.0!\n\n");
#endif
#ifdef CONFIG_PID_MR322002
printk("\n\nWhoops! This kernel is for product mr3220 v2.0!\n\n");
#endif
#ifdef CONFIG_PID_WR70301
printk("\n\nWhoops! This kernel is for product wr703 v1.0!\n\n");
#endif
#ifdef SUPPORT_HARDWARE_MULTI_MODE
/* added by ZCF, 20110420 */
init_sysMode();
init_timer(&sysMode_timer);
sysMode_timer.function = check_sysMode;
mod_timer(&sysMode_timer, jiffies + 1 * HZ);
#endif
#ifndef JUMPSTART_RST_MULTIPLEXED
#ifdef JUMPSTART_GPIO
init_timer(&wps_timer);
wps_timer.function = check_wps;
/* This is NECESSARY, lsz 090109 */
ar7240_gpio_config_input(JUMPSTART_GPIO);
/* configure JUMPSTART_GPIO as level triggered interrupt */
ar7240_gpio_config_int (JUMPSTART_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_HIGH);
req = request_irq (AR7240_GPIO_IRQn(JUMPSTART_GPIO), jumpstart_irq, 0,
"SW_JUMPSTART", NULL);
if (req != 0)
{
printk (KERN_ERR "unable to request IRQ for SWJUMPSTART GPIO (error %d)\n", req);
}
#endif
#endif
#ifdef GPIO_INTERNET_LED_BIT
g_internetLedPin = GPIO_INTERNET_LED_BIT;
#endif
#ifdef AP_USB_LED_GPIO
ar7240_gpio_config_output(AP_USB_LED_GPIO);
/* init Internet LED status (off) */
ar7240_gpio_out_val(AP_USB_LED_GPIO, USB_LED_OFF);
#endif
#ifdef GPIO_WLAN_LED_BIT
/* init WLAN LED status (off) */
ar7240_gpio_out_val(WLAN_LED_GPIO, WLAN_LED_OFF);
#endif
#ifdef SYS_LED_GPIO
/* configure SYS_LED_GPIO as output led */
ar7240_gpio_config_output(SYS_LED_GPIO);
//ar7240_gpio_out_val(SYS_LED_GPIO, SYS_LED_OFF);
#endif
#ifdef GPIO_SLOW_ETH_LED
init_timer(&slow_led_timer);
slow_led_timer.function = slow_led_expire;
mod_timer(&slow_led_timer, jiffies + 1 * HZ);
#endif
#ifdef GPIO_JUMPSTART_LED_BIT
/* configure gpio as outputs */
ar7240_gpio_config_output (TRICOLOR_LED_GREEN_PIN);
/* switch off the led */
ar7240_gpio_out_val(TRICOLOR_LED_GREEN_PIN, OFF);
#endif
#ifdef GPIO_USB_POWER_SUPPORT
/* configure gpio as outputs */
ar7240_gpio_config_output (SYS_USB_POWER_GPIO);
/* power on usb modem */
ar7240_gpio_out_val(SYS_USB_POWER_GPIO, USB_POWER_ON);
#endif
create_simple_config_led_proc_entry ();
ar7240_gpio_config_input(RST_DFT_GPIO);
/* configure GPIO RST_DFT_GPIO as level triggered interrupt */
ar7240_gpio_config_int (RST_DFT_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_HIGH);
rt = request_irq (AR7240_GPIO_IRQn(RST_DFT_GPIO), rst_irq, 0,
"RESTORE_FACTORY_DEFAULT", NULL);
if (rt != 0)
{
printk (KERN_ERR "unable to request IRQ for RESTORE_FACTORY_DEFAULT GPIO (error %d)\n", rt);
}
if (ar7240_gpio_major)
{
dev = MKDEV(ar7240_gpio_major, ar7240_gpio_minor);
rt = register_chrdev_region(dev, 1, "ar7240_gpio_chrdev");
}
else
{
rt = alloc_chrdev_region(&dev, ar7240_gpio_minor, 1, "ar7240_gpio_chrdev");
ar7240_gpio_major = MAJOR(dev);
}
if (rt < 0)
{
printk(KERN_WARNING "ar7240_gpio_chrdev : can`t get major %d\n", ar7240_gpio_major);
return rt;
}
cdev_init (&gpio_device_cdev, &gpio_device_op);
rt = cdev_add(&gpio_device_cdev, dev, 1);
if (rt < 0)
printk(KERN_NOTICE "Error %d adding ar7240_gpio_chrdev ", rt);
return 0;
}
int __init ar7240_simple_config_init(void)
{
int req;
/* restore factory default and system led */
dev_t dev;
int rt;
int current_wifi_value;
int ar7240_gpio_major = gpio_major;
int ar7240_gpio_minor = gpio_minor;
init_timer(&rst_timer);
rst_timer.function = check_rst;
/* config gpio 11, 12, 14, 15, 16, 17 as normal gpio function */
/* gpio11 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION2, 0xff<<24);
/* gpio12 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION3, 0xff<<0);
/* gpio14 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION3, 0xff<<16);
/* gpio15 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION3, 0xff<<24);
/* gpio16 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION4, 0xff<<0);
/* gpio17 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION4, 0xff<<8);
#ifndef CONFIG_MUX_RESET_WPS_BUTTON
/* This is NECESSARY, lsz 090109 */
ath_gpio_config_input(WPS_BUTTON_GPIO);
/* configure JUMPSTART_GPIO as level triggered interrupt */
ath_gpio_config_int (WPS_BUTTON_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_LOW);
req = request_irq (ATH_GPIO_IRQn(WPS_BUTTON_GPIO), wpsStart_irq, 0,
"SW_WPSSTART", NULL);
if (req != 0)
{
printk (KERN_ERR "unable to request IRQ for SWWPSSTART GPIO (error %d)\n", req);
}
#endif
create_simple_config_led_proc_entry ();
ath_gpio_config_input(RST_DFT_GPIO);
/* configure GPIO RST_DFT_GPIO as level triggered interrupt */
ath_gpio_config_int (RST_DFT_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_LOW);
rt = request_irq (ATH_GPIO_IRQn(RST_DFT_GPIO), rst_irq, 0,
"RESTORE_FACTORY_DEFAULT", NULL);
if (rt != 0)
{
printk (KERN_ERR "unable to request IRQ for RESTORE_FACTORY_DEFAULT GPIO (error %d)\n", rt);
}
/* wifi switch! */
ath_gpio_config_input(WIFI_RADIO_SW_GPIO);
current_wifi_value = ath_reg_rd(ATH_GPIO_IN) & (1 << WIFI_RADIO_SW_GPIO);
/* configure GPIO RST_DFT_GPIO as level triggered interrupt */
if(current_wifi_value == 0)
{
ignore_wifibutton = 1;
ath_gpio_config_int (WIFI_RADIO_SW_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_LOW);
}
else
{
ignore_wifibutton =0;
ath_gpio_config_int (WIFI_RADIO_SW_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_HIGH);
}
req = request_irq (ATH_GPIO_IRQn(WIFI_RADIO_SW_GPIO), wifi_sw_irq, 0,
"WIFI_RADIO_SWITCH", NULL);
if (req != 0)
{
printk (KERN_ERR "unable to request IRQ for WIFI_RADIO_SWITCH GPIO (error %d)\n", req);
}
if (ar7240_gpio_major)
{
dev = MKDEV(ar7240_gpio_major, ar7240_gpio_minor);
rt = register_chrdev_region(dev, 1, "ar7240_gpio_chrdev");
}
else
{
rt = alloc_chrdev_region(&dev, ar7240_gpio_minor, 1, "ar7240_gpio_chrdev");
ar7240_gpio_major = MAJOR(dev);
}
if (rt < 0)
{
printk(KERN_WARNING "ar7240_gpio_chrdev : can`t get major %d\n", ar7240_gpio_major);
return rt;
}
cdev_init (&gpio_device_cdev, &gpio_device_op);
rt = cdev_add(&gpio_device_cdev, dev, 1);
if (rt < 0)
printk(KERN_NOTICE "Error %d adding ar7240_gpio_chrdev ", rt);
#ifdef AP_USB_LED_GPIO
ath_gpio_config_output(AP_USB_LED_GPIO);
#endif
#ifdef AP_USB_1_LED_GPIO
ath_gpio_config_output(AP_USB_1_LED_GPIO);
#endif
ath_gpio_config_output(SYS_LED_GPIO);
/* for USB 3G by lyj, 31Aug11 */
#ifdef USB_POWER_SW_GPIO
ath_gpio_config_output(USB_POWER_SW_GPIO);
#endif
#ifdef USB_1_POWER_SW_GPIO
ath_gpio_config_output(USB_1_POWER_SW_GPIO);
#endif
/* s27 will use the gpio 18 19 as ethernet led */
#ifdef CONFIG_SUPPORT_S17
/* GPIO18-19 by lyj, 27Sep11 */
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION4, 0xff<<16);
ath_reg_rmw_clear(ATH_GPIO_OUT_FUNCTION4, 0xff<<24);
/* config GPIO18-19 as output by lyj, 27Sep11 */
ath_gpio_config_output(18);
ath_gpio_config_output(19);
/* set GPIO18-19, for AR9344 art (LNA) by lyj, 27Sep11 */
ath_reg_rmw_set(ATH_GPIO_OUT_FUNCTION4, 0x2f2e0000);
#endif
ath_gpio_out_val(SYS_LED_GPIO, SYS_LED_OFF);
#ifdef AP_USB_LED_GPIO
ath_gpio_out_val(AP_USB_LED_GPIO, USB_LED_OFF);
#endif
#ifdef AP_USB_1_LED_GPIO
ath_gpio_out_val(AP_USB_1_LED_GPIO, USB_1_LED_OFF);
#endif
ath_gpio_out_val (TRICOLOR_LED_GREEN_PIN, OFF);
/* for USB 3G by lyj, 31Aug11 */
#ifdef USB_POWER_SW_GPIO
ath_gpio_out_val(USB_POWER_SW_GPIO, USB_POWER_ON);
#endif
#ifdef USB_1_POWER_SW_GPIO
ath_gpio_out_val(USB_1_POWER_SW_GPIO, USB_1_POWER_ON);
#endif
return 0;
}
int __init ath_simple_config_init(void)
{
#ifdef CONFIG_CUS100
u32 mask = 0;
#endif
#ifdef JUMPSTART_GPIO
int req;
#endif
int ret;
#ifdef AP_RESET_GPIO
int req2;
#endif
ret = misc_register(&athfr_miscdev);
if (ret < 0) {
printk("*** ath misc_register failed %d *** \n", ret);
return -1;
}
#ifdef AP_RESET_GPIO
ath_gpio_config_input(AP_RESET_GPIO);
ath_gpio_config_int(AP_RESET_GPIO, INT_TYPE_LEVEL, INT_POL_ACTIVE_LOW);
printk("%s (%s) AP_RESET_GPIO: %d\n", __FILE__, __func__, AP_RESET_GPIO);
#endif
#ifdef JUMPSTART_GPIO
#ifdef CONFIG_CUS100
mask = ath_reg_rd(ATH_MISC_INT_MASK);
ath_reg_wr(ATH_MISC_INT_MASK, mask | (1 << 2));
ath_gpio_config_int(JUMPSTART_GPIO, INT_TYPE_LEVEL,
INT_POL_ACTIVE_HIGH);
ath_gpio_intr_enable(JUMPSTART_GPIO);
ath_gpio_config_input(JUMPSTART_GPIO);
#else
ath_gpio_config_input(JUMPSTART_GPIO);
/* configure Jumpstart GPIO as level triggered interrupt */
ath_gpio_config_int(JUMPSTART_GPIO, INT_TYPE_LEVEL,
INT_POL_ACTIVE_LOW);
printk("%s (%s) JUMPSTART_GPIO: %d\n", __FILE__, __func__,
JUMPSTART_GPIO);
#ifndef CONFIG_MACH_AR934x
ath_reg_rmw_clear(ATH_GPIO_FUNCTIONS, (1 << 2));
ath_reg_rmw_clear(ATH_GPIO_FUNCTIONS, (1 << 16));
ath_reg_rmw_clear(ATH_GPIO_FUNCTIONS, (1 << 20));
#endif
#endif
req = request_irq(ATH_GPIO_IRQn(JUMPSTART_GPIO), jumpstart_irq, 0,
#ifdef AP_RESET_GPIO
"SW JUMPSTART", NULL);
#else
"SW JUMPSTART/FACTORY RESET", NULL);
#endif
if (req != 0) {
printk("request_irq for jumpstart failed (error %d)\n", req);
misc_deregister(&athfr_miscdev);
ath_gpio_intr_shutdown(ATH_GPIO_IRQn(JUMPSTART_GPIO));
return -1;
}
#endif /* #ifdef JUMPSTART_GPIO */
#ifdef AP_RESET_GPIO
req2 = request_irq(ATH_GPIO_IRQn(AP_RESET_GPIO), ath_reset_irq, 0,
"FACTORY RESET", NULL);
if (req2 != 0) {
printk("request_irq for factory reset failed (error %d)\n", req);
misc_deregister(&athfr_miscdev);
free_irq(req, NULL);
return -1;
}
#endif
#ifdef ATH_S17INT_GPIO
ath_gpio_config_input(ATH_S17INT_GPIO);
/* configure S17 interrupt GPIO as level triggered interrupt */
ath_gpio_config_int(ATH_S17INT_GPIO, INT_TYPE_LEVEL,
INT_POL_ACTIVE_LOW);
printk("%s (%s) ATH_S17INT_GPIO: %d\n", __FILE__, __func__,
ATH_S17INT_GPIO);
#endif
#if !defined(CONFIG_I2S) && defined(AP_USB_LED_GPIO)
ath_gpio_config_output(AP_USB_LED_GPIO);
#endif
init_waitqueue_head(&ath_fr_wq);
#ifdef WPS_LED_GPIO
create_simple_config_led_proc_entry();
#endif
#ifdef POWER_ON_GLED_GPIO
printk("%s (%s) POWER_ON_GLED_GPIO: %d\n", __FILE__, __func__, POWER_ON_GLED_GPIO);
ath_gpio_config_output(POWER_ON_GLED_GPIO);
ath_gpio_out_val(POWER_ON_GLED_GPIO, POWER_LED_ON);
#endif
#ifdef POWER_ON_RLED_GPIO
printk("%s (%s) POWER_ON_RLED_GPIO: %d\n", __FILE__, __func__, POWER_ON_RLED_GPIO);
ath_gpio_config_output(POWER_ON_RLED_GPIO);
ath_gpio_out_val(POWER_ON_RLED_GPIO, POWER_LED_OFF);
OS_INIT_TIMER(NULL, &power_on_timer, power_led_blink, NULL);
OS_SET_TIMER(&power_on_timer, POWER_LED_BLINK_INTERVAL);
#endif
return 0;
}
