HRESULT CControlSurfaceProbe::MidiInShortMsg( DWORD dwShortMsg )
{
// TODO: Handle a MIDI short message which has just been sent
// *from* the surface. In other words, the user has just moved
// a fader or pressed a button; the surface sent a MIDI message;
// SONAR received the message, and routed back into this DLL.
// A typical implementation of this would be:
// [1] "Crack" the MIDI message to determine its type (note, CC, etc.)
// [2] Confirm that the message did actually come from the surface.
// (The user may have daisy-chained gear, and you may have been
// given data sent from some other device.)
// [3] Based on the type of message and the state of the surface
// module, update a SONAR mixer or transport parameter, i.e., make
// a call to m_pMixer->SetMixParam or m_pTransport->SetTransportState.
// Or, particularly if your surface has buttons, you might respond by
// setting some internal state, i.e.,
// m_bEffectSelected = TRUE;
CCriticalSectionAuto csa( &m_cs );
return S_OK;
}
HRESULT CControlSurfaceProbe::RefreshSurface( DWORD fdwRefresh, DWORD dwCookie )
{
CCriticalSectionAuto csa( &m_cs );
m_dwUpdateCount++;
return S_OK;
}
HRESULT CMackieControlBase::Connect( IUnknown* pUnk, HWND hwndApp )
{
// TRACE("CMackieControlBase::Connect()\n");
// Note: You will probably not need to change this implementation.
// The wizard has already generated code to obtain all of the ISonarXXX
// interfaces that are available.
CCriticalSectionAuto csa( &m_cs );
HRESULT hr = S_OK;
releaseSonarInterfaces();
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarMidiOut, (void**)&m_pMidiOut ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarKeyboard, (void**)&m_pKeyboard ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarCommands, (void**)&m_pCommands ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarProject, (void**)&m_pProject ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarMixer, (void**)&m_pMixer ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarTransport, (void**)&m_pTransport ) ))
return hr;
if (FAILED( pUnk->QueryInterface( IID_ISonarIdentity, (void**)&m_pSonarIdentity ) ))
{
// Don't worry of this fails, it means it's an old version of SONAR
TRACE("No ISonarIdentity interface available\n");
m_pSonarIdentity = NULL; // Just in case
// In this case, use our internal id generator
m_dwUniqueId = m_cState.GetNextUniqueId();
}
else if ( FAILED ( hr = m_pSonarIdentity->GetUniqueSurfaceId( this, &m_dwUniqueId ) ) )
return hr;
if ( FAILED( pUnk->QueryInterface( IID_ISonarMixer2, (void**)&m_pMixer2) ) )
m_pMixer2 = NULL;
if ( FAILED( pUnk->QueryInterface( IID_ISonarParamMapping, (void**)&m_pParamMapping ) ) )
m_pParamMapping = NULL;
if ( FAILED( pUnk->QueryInterface( IID_ISonarIdentity2, (void**)&m_pSonarIdentity2 ) ) )
m_pSonarIdentity2 = NULL;
else if ( FAILED ( hr = m_pSonarIdentity2->GetSupportedRefreshFlags( &m_dwSupportedRefreshFlags ) ) )
return hr;
// Call the child class OnConnect()...
OnConnect();
// OK, now we're connected
m_bConnected = true;
return hr;
}
bool MainThreadTaskManager::addTask(MainThreadTask * task)
{
ACSWrapper csa(&m_lock);
if(m_shutdown)
return false;
m_tasks.push_back(task);
m_empty = false;
return true;
}
void CControlSurfaceProbe::SetValue( SONAR_MIXER_STRIP eMixerStrip, DWORD dwStripNum, SONAR_MIXER_PARAM eMixerParam, DWORD dwParamNum, float fValue )
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pMixer)
return;
m_pMixer->SetMixParam(eMixerStrip, dwStripNum, eMixerParam, dwParamNum, fValue, MIX_TOUCH_NORMAL);
}
void CControlSurfaceProbe::SetStripNum(DWORD dwStripNum)
{
CCriticalSectionAuto csa( &m_cs );
m_dwStripNum = dwStripNum;
if ( m_pSonarParamMapping )
m_pSonarParamMapping->OnContextSwitch( m_dwSurfaceID );
}
void CControlSurfaceProbe::SetTransportState(SONAR_TRANSPORT_STATE eTransportState, bool bEnable)
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pTransport)
return;
HRESULT hr = m_pTransport->SetTransportState(eTransportState, (bEnable) ? TRUE : FALSE);
}
void CControlSurfaceProbe::SetMixerStrip(SONAR_MIXER_STRIP eMixerStrip)
{
CCriticalSectionAuto csa( &m_cs );
m_eMixerStrip = eMixerStrip;
if ( m_pSonarParamMapping )
m_pSonarParamMapping->OnContextSwitch( m_dwSurfaceID );
}
HRESULT CACTController::Connect( IUnknown* pUnk, HWND hwndApp )
{
// Note: You will probably not need to change this implementation.
// The wizard has already generated code to obtain all of the ISonarXXX
// interfaces that are available.
CCriticalSectionAuto csa( &m_cs );
HRESULT hr = S_OK;
releaseSonarInterfaces();
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarMidiOut, (void**)&m_pMidiOut ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarKeyboard, (void**)&m_pKeyboard ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarCommands, (void**)&m_pCommands ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarProject, (void**)&m_pProject ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarMixer, (void**)&m_pMixer ) ))
return hr;
if (FAILED( hr = pUnk->QueryInterface( IID_ISonarTransport, (void**)&m_pTransport ) ))
return hr;
// try to obtain the optional ISonarIdentity Interface from the host
hr = pUnk->QueryInterface( IID_ISonarIdentity, (void**)&m_pSonarIdentity );
if ( SUCCEEDED( hr ))
{
// Obtain a unique instance ID. This ID will be the same for this surface each time
// the host is restarted as long as the same surfaces are active in the host.
m_dwSurfaceId = 0;
hr = m_pSonarIdentity->GetUniqueSurfaceId( reinterpret_cast<IControlSurface*>(this), &m_dwSurfaceId );
if ( FAILED( hr ))
return hr;
}
if (FAILED( pUnk->QueryInterface( IID_ISonarParamMapping, (void**)&m_pSonarParamMapping ) ))
{
// Just in case
m_pSonarParamMapping = NULL;
}
if (FAILED( pUnk->QueryInterface( IID_ISonarMixer2, (void**)&m_pSonarMixer2 ) ))
{
// Just in case
m_pSonarMixer2 = NULL;
}
// Call the child class OnConnect()...
OnConnect();
// OK, now we're connected
m_bConnected = true;
return hr;
}
HRESULT CMackieControlXT::GetSizeMax( ULARGE_INTEGER* pcbSize )
{
CCriticalSectionAuto csa( &m_cs );
// Assign the size of the data you write to the registry in Save() to pcbSize->LowPart
pcbSize->LowPart = 0;
pcbSize->HighPart = 0;
return S_OK;
}
//////////////////////////////////////////////////////////////////
// Return the count of ACT parameters you are maintaining
HRESULT CSampleSurface::GetDynamicControlCount( DWORD* pdwCount )
{
if (!pdwCount)
return E_POINTER;
CSFKCriticalSectionAuto csa( m_cs );
*pdwCount = 0;
return S_OK;
}
HRESULT C$$Safe_root$$::Disconnect()
{
// Note: You will probably not need to change this implementation.
// The wizard has already generated code to release all ISonarXXX
// interfaces currently held.
CCriticalSectionAuto csa( &m_cs );
releaseSonarInterfaces();
return S_OK;
}
CMackieControlBase::~CMackieControlBase()
{
// TRACE("CMackieControlBase::~CMackieControlBase()\n");
CCriticalSectionAuto csa(m_cState.GetCS());
m_cState.RemoveUnit(this);
releaseSonarInterfaces();
::DeleteCriticalSection( &m_cs );
::InterlockedDecrement( &g_lComponents );
}
CMackieControlBase::CMackieControlBase() :
m_cRef( 1 ),
m_bDirty( FALSE ),
m_dwUniqueId( 0 ),
m_pMidiOut( NULL ),
m_pKeyboard( NULL ),
m_pCommands( NULL ),
m_pProject( NULL ),
m_pMixer( NULL ),
m_pMixer2( NULL ),
m_pParamMapping( NULL ),
m_pTransport( NULL ),
m_pSonarIdentity( NULL ),
m_pSonarIdentity2( NULL ),
m_dwSupportedRefreshFlags( 0 ),
m_hwndApp( NULL )
{
// TRACE("CMackieControlBase::CMackieControlBase()\n");
::InterlockedIncrement( &g_lComponents );
::InitializeCriticalSection( &m_cs );
m_bConnected = false;
m_dwRefreshCount = 0;
m_bExpectedDeviceType = 0x00;
m_bDeviceType = 0x00;
m_bHaveSerialNumber = false;
::memset(m_bSerialNumber, 0, LEN_SERIAL_NUMBER);
m_dwUnitStripNumOffset = 0;
m_bBindMuteSoloArm = false;
// We don't use all of these, but it makes indexing easier
for (int n = 0; n < NUM_SWITCH_AND_LED_IDS; n++)
{
m_bSwitches[n] = false;
m_bLEDs[n] = 0xFF;
}
m_bRefreshWhenDone = false;
m_bForceRefreshWhenDone = false;
m_bRefreshAllWhenDone = false;
m_bForceRefreshAllWhenDone = false;
CCriticalSectionAuto csa(m_cState.GetCS());
m_cState.AddUnit(this);
// Load the plugin mappings here so that we can locate the .ini file correctly
m_cState.LoadPluginMappings();
UpdateToolbarDisplay(true);
}
HRESULT CMackieControlXT::Save( IStream* pStm, BOOL bClearDirty )
{
CCriticalSectionAuto csa( &m_cs );
// Here you should write any data to pStm which you wish to store.
// Typically you will write values for all of your properties.
// Save() and Load() are used for the host application to provide "Presets"
// and to persist your effect in application project files.
// Valid IPersistStream::Write() errors include only STG_E_MEDIUMFULL
// and STG_E_CANTSAVE. Don't simply return whatever IStream::Write() returned.
return S_OK;
}
HRESULT CMackieControlXT::Load( IStream* pStm )
{
CCriticalSectionAuto csa( &m_cs );
// Here you should read the data using the format you used in Save().
// Save() and Load() are used for the host application to provide "Presets"
// and to persist your effect in application project files.
// Note: IStream::Read() can return S_FALSE, so don't use SUCCEEDED()
// Valid IPersistStream::Load() errors include only E_OUTOFMEMORY and
// E_FAIL. Don't simply return whatever IStream::Read() returned.
return S_OK;
}
void CControlSurfaceProbe::GetMetersValues(CString *str)
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pVUMeters)
{
*str = _T("m_pVUMeters is NULL");
return;
}
DWORD dwCount = 0;
HRESULT hr = m_pVUMeters->GetMeterChannelCount(m_eMixerStrip, m_dwStripNum, &dwCount);
if (FAILED(hr))
{
*str = _T("GetMeterChannelCount FAILED");
return;
}
if (!m_pIdentity)
{
*str = "m_pIdentity is NULL";
return;
}
float *fVals = new float[dwCount];
hr = m_pVUMeters->GetMeterValues(m_eMixerStrip, m_dwStripNum, m_dwSurfaceID, fVals, &dwCount);
if (FAILED(hr))
{
*str = _T("GetMeterValues FAILED");
}
else
{
CString tmp;
str->Empty();
for (DWORD n = 0; n < dwCount; n++)
{
double dB = -60 + 60 * fVals[n];
tmp.Format(_T("%.2fdB\r\n"), dB );
*str += tmp;
}
}
delete[] fVals;
}
void CMackieControlMaster::OnConnect()
{
// TRACE("CMackieControlMaster::OnConnect()\n");
// Tell the XT section too
CMackieControlXT::OnConnect();
// Wire these up now that we have a valid m_pMixer
m_SwMasterFader.Setup(m_pMixer, m_pTransport);
m_SwMasterFaderPan.Setup(m_pMixer, m_pTransport);
CCriticalSectionAuto csa(m_cState.GetCS());
ReconfigureMaster(true);
}
HRESULT CControlSurfaceProbe::GetNoEchoMask( WORD* pwMask, BOOL* pbNoEchoSysx )
{
if (NULL == pwMask || NULL == pbNoEchoSysx)
return E_POINTER;
CCriticalSectionAuto csa( &m_cs );
// TODO: Tell SONAR about any channels (or sysx) that do not require echo.
*pwMask = 0;
*pbNoEchoSysx = FALSE;
return S_OK;
}
HRESULT CMackieControlBase::GetNoEchoMask( WORD* pwMask, BOOL* pbNoEchoSysx )
{
if (NULL == pwMask || NULL == pbNoEchoSysx)
return E_POINTER;
CCriticalSectionAuto csa( &m_cs );
// since the Mackie is a dedicated Mixer Control Surface, we'll just grab
// the whole port... All channels and Sysex
*pwMask = 0xFFFF;
*pbNoEchoSysx = TRUE;
return S_OK;
}
CMackieControlMaster::CMackieControlMaster()
{
// TRACE("CMackieControlMaster::CMackieControlMaster()\n");
m_bExpectedDeviceType = 0x14;
m_bWasInEQFreqGainMode = false;
m_eCurrentTransportDir = DIR_FORWARD;
m_fTransportTimeout = 0;
m_bKeyRepeatKey = 0;
m_fKeyRepeatTimeout = 0;
int n = 0;
// Wire everything up together
for (n = 0; n < NUM_VSELECT_DISPLAY_CELLS; n++)
m_cVSelectDisplay[n].Setup(this, 0x0A + NUM_VSELECT_DISPLAY_CELLS - n - 1);
for (n = 0; n < NUM_TIME_CODE_DISPLAY_CELLS; n++)
m_cTimeCodeDisplay[n].Setup(this, NUM_TIME_CODE_DISPLAY_CELLS - n - 1);
m_HwMasterFader.Setup(this, 8);
CCriticalSectionAuto csa(m_cState.GetCS());
// Default user key and foot bindings
m_cState.SetUserFunctionKey(0, CMD_VIEW_NEW_EXPLORER);
m_cState.SetUserFunctionKey(1, CMD_VIEW_NEW_LOOP_CONSTR);
m_cState.SetUserFunctionKey(2, CMD_VIEW_CONSOLE);
m_cState.SetUserFunctionKey(3, CMD_VIEW_NEW_EVENT_LIST);
m_cState.SetUserFunctionKey(4, CMD_VIEW_NEW_PIANO_ROLL);
m_cState.SetUserFunctionKey(5, CMD_VIEW_VIDEO);
m_cState.SetUserFunctionKey(6, CMD_VIEW_NEW_STAFF);
m_cState.SetUserFunctionKey(7, CMD_VIEW_NEW_LYRICS);
m_cState.SetUserFootSwitch(0, CMD_REALTIME_PLAY);
m_cState.SetUserFootSwitch(1, CMD_REALTIME_RECORD);
TIMECAPS timeDevCaps;
timeGetDevCaps(&timeDevCaps, sizeof(timeDevCaps));
TRACE("timeDevCaps.wPeriodMin = %d\n", timeDevCaps.wPeriodMin);
m_wTransportTimerPeriod = max(timeDevCaps.wPeriodMin, 10);
m_wKeyRepeatTimerPeriod = max(timeDevCaps.wPeriodMin, 10);
m_bTransportTimerActive = false;
m_bKeyRepeatTimerActive = false;
}
HRESULT CACTController::Disconnect()
{
// Note: You will probably not need to change this implementation.
// The wizard has already generated code to release all ISonarXXX
// interfaces currently held.
CCriticalSectionAuto csa( &m_cs );
// Call the child class OnDisonnect()...
OnDisconnect();
// We're no longer connected
m_bConnected = false;
releaseSonarInterfaces();
return S_OK;
}
HRESULT CControlSurfaceProbe::MidiInLongMsg( DWORD cbLongMsg, const BYTE* pbLongMsg )
{
if (NULL == pbLongMsg)
return E_POINTER;
if (0 == cbLongMsg)
return S_OK; // nothing to do
CCriticalSectionAuto csa( &m_cs );
// TODO: Handle a MIDI long (SysX) message which has just been sent
// *from* the surface. In other words, the user has just moved
// a fader or pressed a button; the surface sent a MIDI message;
// SONAR received the message, and routed back into this DLL.
// See MidiInShortMsg for notes on how this method might be implemented.
return S_OK;
}
void CControlSurfaceProbe::GetValue(SONAR_MIXER_STRIP eMixerStrip, DWORD dwStripNum, SONAR_MIXER_PARAM eMixerParam, DWORD dwParamNum, float* pfValue, CString *str)
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pMixer)
{
*str = _T("m_pMixer is NULL");
return;
}
HRESULT hr = m_pMixer->GetMixParam(eMixerStrip, dwStripNum, eMixerParam, dwParamNum, pfValue);
if (FAILED(hr))
{
*str = _T("GetMixParam FAILED");
return;
}
str->Format(_T("%.2f"), *pfValue);
}
void CMackieControlXT::OnConnect()
{
// TRACE("CMackieControlXT::OnConnect()\n");
// Wire these up now that we have a valid m_pMixer
for (int n = 0; n < NUM_MAIN_CHANNELS; n++)
{
m_SwStrip[n].Setup(m_pMixer, m_pTransport, m_dwUniqueId);
m_SwVPot[n].Setup(m_pMixer, m_pTransport);
m_SwRec[n].Setup(m_pMixer, m_pTransport);
m_SwSolo[n].Setup(m_pMixer, m_pTransport);
m_SwMute[n].Setup(m_pMixer, m_pTransport);
m_SwArchive[n].Setup(m_pMixer, m_pTransport);
m_SwInputEcho[n].Setup(m_pMixer, m_pTransport);
m_SwFader[n].Setup(m_pMixer, m_pTransport);
}
CCriticalSectionAuto csa(m_cState.GetCS());
ReconfigureXT(true);
}
HRESULT CMackieControlBase::RefreshSurface( DWORD fdwRefresh, DWORD dwCookie )
{
CCriticalSectionAuto csa( &m_cs );
if (!m_bConnected)
return S_OK;
if (fdwRefresh != 0 ||
dwCookie == (DWORD)&m_bMsgRefresh ||
dwCookie == (DWORD)&m_bMsgForceRefresh ||
dwCookie == (DWORD)&m_bMsgRefreshAll ||
dwCookie == (DWORD)&m_bMsgForceRefreshAll)
{
m_dwRefreshCount++;
bool bForceSend = (dwCookie == (DWORD)&m_bMsgForceRefresh || dwCookie == (DWORD)&m_bMsgForceRefreshAll);
// Detected the surface yet?
if (!m_bHaveSerialNumber)
{
if (m_bExpectedDeviceType != 0x00)
QuerySerialNumber(m_bExpectedDeviceType);
}
else
{
OnRefreshSurface(fdwRefresh, bForceSend);
}
}
else if (dwCookie == (DWORD)&m_bMsgSetAllFadersToDefault)
{
if (m_bHaveSerialNumber)
SetAllFadersToDefault();
}
else if (dwCookie == (DWORD)&m_bMsgSetAllVPotsToDefault)
{
if (m_bHaveSerialNumber)
SetAllVPotsToDefault();
}
return S_OK;
}
HRESULT CMackieControlBase::MidiInShortMsg( DWORD dwShortMsg )
{
CCriticalSectionAuto csa( &m_cs );
if (!m_bConnected)
return S_OK;
if (!m_bHaveSerialNumber)
return S_OK;
ClearRefreshFlags();
BYTE bStatus = (BYTE)(dwShortMsg & 0xFF);
BYTE bD1 = (BYTE)((dwShortMsg >> 8) & 0xFF);
BYTE bD2 = (BYTE)((dwShortMsg >> 16) & 0xFF);
OnMidiInShort(bStatus, bD1, bD2);
DispatchRefreshRequest();
return S_OK;
}
void CControlSurfaceProbe::GetArm(CString *str)
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pMixer)
{
*str = "m_pMixer is NULL";
return;
}
BOOL bVal;
HRESULT hr = m_pMixer->GetArmMixParam(m_eMixerStrip, m_dwStripNum, m_eMixerParam, m_dwParamNum, &bVal);
if (FAILED(hr))
{
*str = "GetArmMixParam FAILED";
return;
}
*str = (bVal) ? "True" : "False";
}
void CControlSurfaceProbe::GetNumMeters(CString *str)
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pVUMeters)
{
*str = _T("m_pVUMeters is NULL");
return;
}
DWORD dwCount = 0;
HRESULT hr = m_pVUMeters->GetMeterChannelCount(m_eMixerStrip, m_dwStripNum, &dwCount);
if (FAILED(hr))
{
*str = _T("GetMeterChannelCount FAILED");
return;
}
str->Format(_T("%u"), dwCount);
}
void CControlSurfaceProbe::GetTransportState(SONAR_TRANSPORT_STATE eTransportState, CString *str)
{
CCriticalSectionAuto csa( &m_cs );
if (!m_pTransport)
{
*str = "m_pTransport is NULL";
return;
}
BOOL bValue;
HRESULT hr = m_pTransport->GetTransportState(eTransportState, &bValue);
if (FAILED(hr))
{
*str = "GetTransportState FAILED";
return;
}
*str = (bValue) ? "1" : "0";
}
