C++ (Cpp) decode_light Examples

Example #1

File: mapblock_mesh.cpp Project: gourytch/freeminer

/*
	Calculate non-smooth lighting at face of node.
	Single light bank.
*/
static u8 getFaceLight(enum LightBank bank, MapNode n, MapNode n2,
		v3s16 face_dir, INodeDefManager *ndef)
{
	u8 light;
	u8 l1 = n.getLight(bank, ndef);
	u8 l2 = n2.getLight(bank, ndef);
	if(l1 > l2)
		light = l1;
	else
		light = l2;

	// Boost light level for light sources
	u8 light_source = MYMAX(ndef->get(n).light_source,
			ndef->get(n2).light_source);
	if(light_source > light)
		light = light_source;

	return decode_light(light);
}

Example #2

File: mapblock_mesh.cpp Project: 0151n/minetest

/*
	Calculate non-smooth lighting at interior of node.
	Single light bank.
*/
static u8 getInteriorLight(enum LightBank bank, MapNode n, s32 increment,
		MeshMakeData *data)
{
	INodeDefManager *ndef = data->m_gamedef->ndef();
	u8 light = n.getLight(bank, ndef);

	while(increment > 0)
	{
		light = undiminish_light(light);
		--increment;
	}
	while(increment < 0)
	{
		light = diminish_light(light);
		++increment;
	}

	return decode_light(light);
}

Example #3

File: particles.cpp Project: Gael-de-Sailly/minetest

void Particle::updateLight()
{
	u8 light = 0;
	bool pos_ok;

	v3s16 p = v3s16(
		floor(m_pos.X+0.5),
		floor(m_pos.Y+0.5),
		floor(m_pos.Z+0.5)
	);
	MapNode n = m_env->getClientMap().getNodeNoEx(p, &pos_ok);
	if (pos_ok)
		light = n.getLightBlend(m_env->getDayNightRatio(), m_gamedef->ndef());
	else
		light = blend_light(m_env->getDayNightRatio(), LIGHT_SUN, 0);

	u8 m_light = decode_light(light + m_glow);
	m_color.set(255,
		m_light * m_base_color.getRed() / 255,
		m_light * m_base_color.getGreen() / 255,
		m_light * m_base_color.getBlue() / 255);
}

Example #4

File: mapblock_mesh.cpp Project: andrew889/minetest-1

/*
	Calculate non-smooth lighting at face of node.
	Single light bank.
*/
static u8 getFaceLight(enum LightBank bank, MapNode n, MapNode n2,
		v3s16 face_dir, MeshMakeData *data)
{
	INodeDefManager *ndef = data->m_gamedef->ndef();

	u8 light;
	u8 l1 = n.getLight(bank, ndef);
	u8 l2 = n2.getLight(bank, ndef);
	if(l1 > l2)
		light = l1;
	else
		light = l2;

	// Boost light level for light sources
	u8 light_source = MYMAX(ndef->get(n).light_source,
			ndef->get(n2).light_source);
	//if(light_source >= light)
		//return decode_light(undiminish_light(light_source));
	if(light_source > light)
		//return decode_light(light_source);
		light = light_source;

	// Make some nice difference to different sides

	// This makes light come from a corner
	/*if(face_dir.X == 1 || face_dir.Z == 1 || face_dir.Y == -1)
		light = diminish_light(diminish_light(light));
	else if(face_dir.X == -1 || face_dir.Z == -1)
		light = diminish_light(light);*/

	// All neighboring faces have different shade (like in minecraft)
	if(face_dir.X == 1 || face_dir.X == -1 || face_dir.Y == -1)
		light = diminish_light(diminish_light(light));
	else if(face_dir.Z == 1 || face_dir.Z == -1)
		light = diminish_light(light);

	return decode_light(light);
}

Example #5

File: mapblock_mesh.cpp Project: andrew889/minetest-1

/*
	Calculate smooth lighting at the XYZ- corner of p.
	Single light bank.
*/
static u8 getSmoothLight(enum LightBank bank, v3s16 p, MeshMakeData *data)
{
	static v3s16 dirs8[8] = {
		v3s16(0,0,0),
		v3s16(0,0,1),
		v3s16(0,1,0),
		v3s16(0,1,1),
		v3s16(1,0,0),
		v3s16(1,1,0),
		v3s16(1,0,1),
		v3s16(1,1,1),
	};

	INodeDefManager *ndef = data->m_gamedef->ndef();

	u16 ambient_occlusion = 0;
	u16 light = 0;
	u16 light_count = 0;
	u8 light_source_max = 0;
	for(u32 i=0; i<8; i++)
	{
		MapNode n = data->m_vmanip.getNodeNoEx(p - dirs8[i]);
		const ContentFeatures &f = ndef->get(n);
		if(f.light_source > light_source_max)
			light_source_max = f.light_source;
		// Check f.solidness because fast-style leaves look
		// better this way
		if(f.param_type == CPT_LIGHT && f.solidness != 2)
		{
			light += decode_light(n.getLight(bank, ndef));
			light_count++;
		}
		else if(n.getContent() != CONTENT_IGNORE)
		{
			ambient_occlusion++;
		}
	}

	if(light_count == 0)
		return 255;
	
	light /= light_count;

	// Boost brightness around light sources
	if(decode_light(light_source_max) >= light)
		//return decode_light(undiminish_light(light_source_max));
		return decode_light(light_source_max);

	if(ambient_occlusion > 4)
	{
		//ambient_occlusion -= 4;
		//light = (float)light / ((float)ambient_occlusion * 0.5 + 1.0);
		float light_amount = (8 - ambient_occlusion) / 4.0;
		float light_f = (float)light / 255.0;
		light_f = pow(light_f, 2.2f); // gamma -> linear space
		light_f = light_f * light_amount;
		light_f = pow(light_f, 1.0f/2.2f); // linear -> gamma space
		if(light_f > 1.0)
			light_f = 1.0;
		light = 255.0 * light_f + 0.5;
	}

	return light;
}

Example #6

File: content_mapblock.cpp Project: lesliev/minetest

void mapblock_mesh_generate_special(MeshMakeData *data,
		MeshCollector &collector)
{
	INodeDefManager *nodedef = data->m_gamedef->ndef();

	// 0ms
	//TimeTaker timer("mapblock_mesh_generate_special()");

	/*
		Some settings
	*/
	bool new_style_water = g_settings->getBool("new_style_water");
	
	float node_liquid_level = 1.0;
	if(new_style_water)
		node_liquid_level = 0.85;
	
	v3s16 blockpos_nodes = data->m_blockpos*MAP_BLOCKSIZE;

	for(s16 z=0; z<MAP_BLOCKSIZE; z++)
	for(s16 y=0; y<MAP_BLOCKSIZE; y++)
	for(s16 x=0; x<MAP_BLOCKSIZE; x++)
	{
		v3s16 p(x,y,z);

		MapNode n = data->m_vmanip.getNodeNoEx(blockpos_nodes+p);
		const ContentFeatures &f = nodedef->get(n);

		// Only solidness=0 stuff is drawn here
		if(f.solidness != 0)
			continue;
		
		switch(f.drawtype){
		default:
			infostream<<"Got "<<f.drawtype<<std::endl;
			assert(0);
			break;
		case NDT_AIRLIKE:
			break;
		case NDT_LIQUID:
		{
			/*
				Add water sources to mesh if using new style
			*/
			TileSpec tile_liquid = f.special_tiles[0];
			AtlasPointer &pa_liquid = tile_liquid.texture;

			bool top_is_air = false;
			MapNode n = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y+1,z));
			if(n.getContent() == CONTENT_AIR)
				top_is_air = true;
			
			if(top_is_air == false)
				continue;

			u16 l = getInteriorLight(n, 0, data);
			video::SColor c = MapBlock_LightColor(f.alpha, l);
			
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
						pa_liquid.x0(), pa_liquid.y1()),
				video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
						pa_liquid.x1(), pa_liquid.y1()),
				video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c,
						pa_liquid.x1(), pa_liquid.y0()),
				video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c,
						pa_liquid.x0(), pa_liquid.y0()),
			};

			v3f offset(p.X, p.Y + (-0.5+node_liquid_level)*BS, p.Z);
			for(s32 i=0; i<4; i++)
			{
				vertices[i].Pos += offset;
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(tile_liquid, vertices, 4, indices, 6);
		break;}
		case NDT_FLOWINGLIQUID:
		{
			/*
				Add flowing liquid to mesh
			*/
			TileSpec tile_liquid = f.special_tiles[0];
			TileSpec tile_liquid_bfculled = f.special_tiles[1];
			AtlasPointer &pa_liquid = tile_liquid.texture;

			bool top_is_same_liquid = false;
			MapNode ntop = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y+1,z));
			content_t c_flowing = nodedef->getId(f.liquid_alternative_flowing);
			content_t c_source = nodedef->getId(f.liquid_alternative_source);
			if(ntop.getContent() == c_flowing || ntop.getContent() == c_source)
				top_is_same_liquid = true;
			
			u16 l = 0;
			// If this liquid emits light and doesn't contain light, draw
			// it at what it emits, for an increased effect
			u8 light_source = nodedef->get(n).light_source;
			if(light_source != 0){
				//l = decode_light(undiminish_light(light_source));
				l = decode_light(light_source);
				l = l | (l<<8);
			}
			// Use the light of the node on top if possible
			else if(nodedef->get(ntop).param_type == CPT_LIGHT)
				l = getInteriorLight(ntop, 0, data);
			// Otherwise use the light of this node (the liquid)
			else
				l = getInteriorLight(n, 0, data);
			video::SColor c = MapBlock_LightColor(f.alpha, l);
			
			// Neighbor liquid levels (key = relative position)
			// Includes current node
			core::map<v3s16, f32> neighbor_levels;
			core::map<v3s16, content_t> neighbor_contents;
			core::map<v3s16, u8> neighbor_flags;
			const u8 neighborflag_top_is_same_liquid = 0x01;
			v3s16 neighbor_dirs[9] = {
				v3s16(0,0,0),
				v3s16(0,0,1),
				v3s16(0,0,-1),
				v3s16(1,0,0),
				v3s16(-1,0,0),
				v3s16(1,0,1),
				v3s16(-1,0,-1),
				v3s16(1,0,-1),
				v3s16(-1,0,1),
			};
			for(u32 i=0; i<9; i++)
			{
				content_t content = CONTENT_AIR;
				float level = -0.5 * BS;
				u8 flags = 0;
				// Check neighbor
				v3s16 p2 = p + neighbor_dirs[i];
				MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
				if(n2.getContent() != CONTENT_IGNORE)
				{
					content = n2.getContent();

					if(n2.getContent() == c_source)
						level = (-0.5+node_liquid_level) * BS;
					else if(n2.getContent() == c_flowing)
						level = (-0.5 + ((float)(n2.param2&LIQUID_LEVEL_MASK)
								+ 0.5) / 8.0 * node_liquid_level) * BS;

					// Check node above neighbor.
					// NOTE: This doesn't get executed if neighbor
					//       doesn't exist
					p2.Y += 1;
					n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
					if(n2.getContent() == c_source ||
							n2.getContent() == c_flowing)
						flags |= neighborflag_top_is_same_liquid;
				}
				
				neighbor_levels.insert(neighbor_dirs[i], level);
				neighbor_contents.insert(neighbor_dirs[i], content);
				neighbor_flags.insert(neighbor_dirs[i], flags);
			}

			// Corner heights (average between four liquids)
			f32 corner_levels[4];
			
			v3s16 halfdirs[4] = {
				v3s16(0,0,0),
				v3s16(1,0,0),
				v3s16(1,0,1),
				v3s16(0,0,1),
			};
			for(u32 i=0; i<4; i++)
			{
				v3s16 cornerdir = halfdirs[i];
				float cornerlevel = 0;
				u32 valid_count = 0;
				u32 air_count = 0;
				for(u32 j=0; j<4; j++)
				{
					v3s16 neighbordir = cornerdir - halfdirs[j];
					content_t content = neighbor_contents[neighbordir];
					// If top is liquid, draw starting from top of node
					if(neighbor_flags[neighbordir] &
							neighborflag_top_is_same_liquid)
					{
						cornerlevel = 0.5*BS;
						valid_count = 1;
						break;
					}
					// Source is always the same height
					else if(content == c_source)
					{
						cornerlevel = (-0.5+node_liquid_level)*BS;
						valid_count = 1;
						break;
					}
					// Flowing liquid has level information
					else if(content == c_flowing)
					{
						cornerlevel += neighbor_levels[neighbordir];
						valid_count++;
					}
					else if(content == CONTENT_AIR)
					{
						air_count++;
					}
				}
				if(air_count >= 2)
					cornerlevel = -0.5*BS;
				else if(valid_count > 0)
					cornerlevel /= valid_count;
				corner_levels[i] = cornerlevel;
			}

			/*
				Generate sides
			*/

			v3s16 side_dirs[4] = {
				v3s16(1,0,0),
				v3s16(-1,0,0),
				v3s16(0,0,1),
				v3s16(0,0,-1),
			};
			s16 side_corners[4][2] = {
				{1, 2},
				{3, 0},
				{2, 3},
				{0, 1},
			};
			for(u32 i=0; i<4; i++)
			{
				v3s16 dir = side_dirs[i];

				/*
					If our topside is liquid and neighbor's topside
					is liquid, don't draw side face
				*/
				if(top_is_same_liquid &&
						neighbor_flags[dir] & neighborflag_top_is_same_liquid)
					continue;

				content_t neighbor_content = neighbor_contents[dir];
				const ContentFeatures &n_feat = nodedef->get(neighbor_content);
				
				// Don't draw face if neighbor is blocking the view
				if(n_feat.solidness == 2)
					continue;
				
				bool neighbor_is_same_liquid = (neighbor_content == c_source
						|| neighbor_content == c_flowing);
				
				// Don't draw any faces if neighbor same is liquid and top is
				// same liquid
				if(neighbor_is_same_liquid == true
						&& top_is_same_liquid == false)
					continue;

				// Use backface culled material if neighbor doesn't have a
				// solidness of 0
				const TileSpec *current_tile = &tile_liquid;
				if(n_feat.solidness != 0 || n_feat.visual_solidness != 0)
					current_tile = &tile_liquid_bfculled;
				
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_liquid.x0(), pa_liquid.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_liquid.x1(), pa_liquid.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_liquid.x1(), pa_liquid.y0()),
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_liquid.x0(), pa_liquid.y0()),
				};
				
				/*
					If our topside is liquid, set upper border of face
					at upper border of node
				*/
				if(top_is_same_liquid)
				{
					vertices[2].Pos.Y = 0.5*BS;
					vertices[3].Pos.Y = 0.5*BS;
				}
				/*
					Otherwise upper position of face is corner levels
				*/
				else
				{
					vertices[2].Pos.Y = corner_levels[side_corners[i][0]];
					vertices[3].Pos.Y = corner_levels[side_corners[i][1]];
				}
				
				/*
					If neighbor is liquid, lower border of face is corner
					liquid levels
				*/
				if(neighbor_is_same_liquid)
				{
					vertices[0].Pos.Y = corner_levels[side_corners[i][1]];
					vertices[1].Pos.Y = corner_levels[side_corners[i][0]];
				}
				/*
					If neighbor is not liquid, lower border of face is
					lower border of node
				*/
				else
				{
					vertices[0].Pos.Y = -0.5*BS;
					vertices[1].Pos.Y = -0.5*BS;
				}
				
				for(s32 j=0; j<4; j++)
				{
					if(dir == v3s16(0,0,1))
						vertices[j].Pos.rotateXZBy(0);
					if(dir == v3s16(0,0,-1))
						vertices[j].Pos.rotateXZBy(180);
					if(dir == v3s16(-1,0,0))
						vertices[j].Pos.rotateXZBy(90);
					if(dir == v3s16(1,0,-0))
						vertices[j].Pos.rotateXZBy(-90);
						
					// Do this to not cause glitches when two liquids are
					// side-by-side
					/*if(neighbor_is_same_liquid == false){
						vertices[j].Pos.X *= 0.98;
						vertices[j].Pos.Z *= 0.98;
					}*/

					vertices[j].Pos += intToFloat(p, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(*current_tile, vertices, 4, indices, 6);
			}
			
			/*
				Generate top side, if appropriate
			*/
			
			if(top_is_same_liquid == false)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_liquid.x0(), pa_liquid.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_liquid.x1(), pa_liquid.y1()),
					video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c,
							pa_liquid.x1(), pa_liquid.y0()),
					video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c,
							pa_liquid.x0(), pa_liquid.y0()),
				};
				
				// To get backface culling right, the vertices need to go
				// clockwise around the front of the face. And we happened to
				// calculate corner levels in exact reverse order.
				s32 corner_resolve[4] = {3,2,1,0};

				for(s32 i=0; i<4; i++)
				{
					//vertices[i].Pos.Y += liquid_level;
					//vertices[i].Pos.Y += neighbor_levels[v3s16(0,0,0)];
					s32 j = corner_resolve[i];
					vertices[i].Pos.Y += corner_levels[j];
					vertices[i].Pos += intToFloat(p, BS);
				}
				
				// Default downwards-flowing texture animation goes from 
				// -Z towards +Z, thus the direction is +Z.
				// Rotate texture to make animation go in flow direction
				// Positive if liquid moves towards +Z
				int dz = (corner_levels[side_corners[2][0]] +
						corner_levels[side_corners[2][1]] <
						corner_levels[side_corners[3][0]] +
						corner_levels[side_corners[3][1]]);
				// Positive if liquid moves towards +X
				int dx = (corner_levels[side_corners[0][0]] +
						corner_levels[side_corners[0][1]] <
						corner_levels[side_corners[1][0]] +
						corner_levels[side_corners[1][1]]);
				// -X
				if(-dx >= abs(dz))
				{
					v2f t = vertices[0].TCoords;
					vertices[0].TCoords = vertices[1].TCoords;
					vertices[1].TCoords = vertices[2].TCoords;
					vertices[2].TCoords = vertices[3].TCoords;
					vertices[3].TCoords = t;
				}
				// +X
				if(dx >= abs(dz))
				{
					v2f t = vertices[0].TCoords;
					vertices[0].TCoords = vertices[3].TCoords;
					vertices[3].TCoords = vertices[2].TCoords;
					vertices[2].TCoords = vertices[1].TCoords;
					vertices[1].TCoords = t;
				}
				// -Z
				if(-dz >= abs(dx))
				{
					v2f t = vertices[0].TCoords;
					vertices[0].TCoords = vertices[3].TCoords;
					vertices[3].TCoords = vertices[2].TCoords;
					vertices[2].TCoords = vertices[1].TCoords;
					vertices[1].TCoords = t;
					t = vertices[0].TCoords;
					vertices[0].TCoords = vertices[3].TCoords;
					vertices[3].TCoords = vertices[2].TCoords;
					vertices[2].TCoords = vertices[1].TCoords;
					vertices[1].TCoords = t;
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(tile_liquid, vertices, 4, indices, 6);
			}
		break;}
		case NDT_GLASSLIKE:
		{
			TileSpec tile = getNodeTile(n, p, v3s16(0,0,0), data);
			AtlasPointer ap = tile.texture;

			u16 l = getInteriorLight(n, 1, data);
			video::SColor c = MapBlock_LightColor(255, l);

			for(u32 j=0; j<6; j++)
			{
				// Check this neighbor
				v3s16 n2p = blockpos_nodes + p + g_6dirs[j];
				MapNode n2 = data->m_vmanip.getNodeNoEx(n2p);
				// Don't make face if neighbor is of same type
				if(n2.getContent() == n.getContent())
					continue;

				// The face at Z+
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c,
						ap.x0(), ap.y1()),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c,
						ap.x1(), ap.y1()),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c,
						ap.x1(), ap.y0()),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c,
						ap.x0(), ap.y0()),
				};
				
				// Rotations in the g_6dirs format
				if(j == 0) // Z+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(0);
				else if(j == 1) // Y+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(-90);
				else if(j == 2) // X+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-90);
				else if(j == 3) // Z-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(180);
				else if(j == 4) // Y-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(90);
				else if(j == 5) // X-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(90);

				for(u16 i=0; i<4; i++){
					vertices[i].Pos += intToFloat(p, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(tile, vertices, 4, indices, 6);
			}
		break;}
		case NDT_ALLFACES:
		{
			TileSpec tile_leaves = getNodeTile(n, p,
					v3s16(0,0,0), data);
			AtlasPointer pa_leaves = tile_leaves.texture;

			u16 l = getInteriorLight(n, 1, data);
			video::SColor c = MapBlock_LightColor(255, l);

			v3f pos = intToFloat(p, BS);
			aabb3f box(-BS/2,-BS/2,-BS/2,BS/2,BS/2,BS/2);
			box.MinEdge += pos;
			box.MaxEdge += pos;
			makeCuboid(&collector, box, &tile_leaves, 1, c, NULL);
		break;}
		case NDT_ALLFACES_OPTIONAL:
			// This is always pre-converted to something else
			assert(0);
			break;
		case NDT_TORCHLIKE:
		{
			v3s16 dir = n.getWallMountedDir(nodedef);
			
			u8 tileindex = 0;
			if(dir == v3s16(0,-1,0)){
				tileindex = 0; // floor
			} else if(dir == v3s16(0,1,0)){
				tileindex = 1; // ceiling
			// For backwards compatibility
			} else if(dir == v3s16(0,0,0)){
				tileindex = 0; // floor
			} else {
				tileindex = 2; // side
			}

			TileSpec tile = getNodeTileN(n, p, tileindex, data);
			tile.material_flags &= ~MATERIAL_FLAG_BACKFACE_CULLING;
			tile.material_flags |= MATERIAL_FLAG_CRACK_OVERLAY;

			AtlasPointer ap = tile.texture;

			video::SColor c(255,255,255,255);

			// Wall at X+ of node
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,-BS/2,0, 0,0,0, c,
						ap.x0(), ap.y1()),
				video::S3DVertex(BS/2,-BS/2,0, 0,0,0, c,
						ap.x1(), ap.y1()),
				video::S3DVertex(BS/2,BS/2,0, 0,0,0, c,
						ap.x1(), ap.y0()),
				video::S3DVertex(-BS/2,BS/2,0, 0,0,0, c,
						ap.x0(), ap.y0()),
			};

			for(s32 i=0; i<4; i++)
			{
				if(dir == v3s16(1,0,0))
					vertices[i].Pos.rotateXZBy(0);
				if(dir == v3s16(-1,0,0))
					vertices[i].Pos.rotateXZBy(180);
				if(dir == v3s16(0,0,1))
					vertices[i].Pos.rotateXZBy(90);
				if(dir == v3s16(0,0,-1))
					vertices[i].Pos.rotateXZBy(-90);
				if(dir == v3s16(0,-1,0))
					vertices[i].Pos.rotateXZBy(45);
				if(dir == v3s16(0,1,0))
					vertices[i].Pos.rotateXZBy(-45);

				vertices[i].Pos += intToFloat(p, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(tile, vertices, 4, indices, 6);
		break;}
		case NDT_SIGNLIKE:
		{
			TileSpec tile = getNodeTileN(n, p, 0, data);
			tile.material_flags &= ~MATERIAL_FLAG_BACKFACE_CULLING;
			tile.material_flags |= MATERIAL_FLAG_CRACK_OVERLAY;
			AtlasPointer ap = tile.texture;

			u16 l = getInteriorLight(n, 0, data);
			video::SColor c = MapBlock_LightColor(255, l);
				
			float d = (float)BS/16;
			// Wall at X+ of node
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(BS/2-d,BS/2,BS/2, 0,0,0, c,
						ap.x0(), ap.y0()),
				video::S3DVertex(BS/2-d,BS/2,-BS/2, 0,0,0, c,
						ap.x1(), ap.y0()),
				video::S3DVertex(BS/2-d,-BS/2,-BS/2, 0,0,0, c,
						ap.x1(), ap.y1()),
				video::S3DVertex(BS/2-d,-BS/2,BS/2, 0,0,0, c,
						ap.x0(), ap.y1()),
			};

			v3s16 dir = n.getWallMountedDir(nodedef);

			for(s32 i=0; i<4; i++)
			{
				if(dir == v3s16(1,0,0))
					vertices[i].Pos.rotateXZBy(0);
				if(dir == v3s16(-1,0,0))
					vertices[i].Pos.rotateXZBy(180);
				if(dir == v3s16(0,0,1))
					vertices[i].Pos.rotateXZBy(90);
				if(dir == v3s16(0,0,-1))
					vertices[i].Pos.rotateXZBy(-90);
				if(dir == v3s16(0,-1,0))
					vertices[i].Pos.rotateXYBy(-90);
				if(dir == v3s16(0,1,0))
					vertices[i].Pos.rotateXYBy(90);

				vertices[i].Pos += intToFloat(p, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(tile, vertices, 4, indices, 6);
		break;}
		case NDT_PLANTLIKE:
		{
			TileSpec tile = getNodeTileN(n, p, 0, data);
			tile.material_flags |= MATERIAL_FLAG_CRACK_OVERLAY;
			AtlasPointer ap = tile.texture;
			
			u16 l = getInteriorLight(n, 1, data);
			video::SColor c = MapBlock_LightColor(255, l);

			for(u32 j=0; j<4; j++)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2*f.visual_scale,-BS/2,0, 0,0,0, c,
						ap.x0(), ap.y1()),
					video::S3DVertex( BS/2*f.visual_scale,-BS/2,0, 0,0,0, c,
						ap.x1(), ap.y1()),
					video::S3DVertex( BS/2*f.visual_scale,
						-BS/2 + f.visual_scale*BS,0, 0,0,0, c,
						ap.x1(), ap.y0()),
					video::S3DVertex(-BS/2*f.visual_scale,
						-BS/2 + f.visual_scale*BS,0, 0,0,0, c,
						ap.x0(), ap.y0()),
				};

				if(j == 0)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(45);
				}
				else if(j == 1)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-45);
				}
				else if(j == 2)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(135);
				}
				else if(j == 3)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-135);
				}

				for(u16 i=0; i<4; i++)
				{
					vertices[i].Pos *= f.visual_scale;
					vertices[i].Pos += intToFloat(p, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(tile, vertices, 4, indices, 6);
			}
		break;}
		case NDT_FENCELIKE:
		{
			TileSpec tile = getNodeTile(n, p, v3s16(0,0,0), data);
			TileSpec tile_nocrack = tile;
			tile_nocrack.material_flags &= ~MATERIAL_FLAG_CRACK;
			
			// A hack to put wood the right way around in the posts
			ITextureSource *tsrc = data->m_gamedef->tsrc();
			TileSpec tile_rot = tile;
			tile_rot.texture = tsrc->getTexture(tsrc->getTextureName(
					tile.texture.id) + "^[transformR90");
					
			u16 l = getInteriorLight(n, 1, data);
			video::SColor c = MapBlock_LightColor(255, l);

			const f32 post_rad=(f32)BS/8;
			const f32 bar_rad=(f32)BS/16;
			const f32 bar_len=(f32)(BS/2)-post_rad;

			v3f pos = intToFloat(p, BS);

			// The post - always present
			aabb3f post(-post_rad,-BS/2,-post_rad,post_rad,BS/2,post_rad);
			post.MinEdge += pos;
			post.MaxEdge += pos;
			f32 postuv[24]={
					6/16.,6/16.,10/16.,10/16.,
					6/16.,6/16.,10/16.,10/16.,
					0/16.,0,4/16.,1,
					4/16.,0,8/16.,1,
					8/16.,0,12/16.,1,
					12/16.,0,16/16.,1};
			makeCuboid(&collector, post, &tile_rot, 1, c, postuv);

			// Now a section of fence, +X, if there's a post there
			v3s16 p2 = p;
			p2.X++;
			MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
			const ContentFeatures *f2 = &nodedef->get(n2);
			if(f2->drawtype == NDT_FENCELIKE)
			{
				aabb3f bar(-bar_len+BS/2,-bar_rad+BS/4,-bar_rad,
						bar_len+BS/2,bar_rad+BS/4,bar_rad);
				bar.MinEdge += pos;
				bar.MaxEdge += pos;
				f32 xrailuv[24]={
					0/16.,2/16.,16/16.,4/16.,
					0/16.,4/16.,16/16.,6/16.,
					6/16.,6/16.,8/16.,8/16.,
					10/16.,10/16.,12/16.,12/16.,
					0/16.,8/16.,16/16.,10/16.,
					0/16.,14/16.,16/16.,16/16.};
				makeCuboid(&collector, bar, &tile_nocrack, 1,
						c, xrailuv);
				bar.MinEdge.Y -= BS/2;
				bar.MaxEdge.Y -= BS/2;
				makeCuboid(&collector, bar, &tile_nocrack, 1,
						c, xrailuv);
			}

			// Now a section of fence, +Z, if there's a post there
			p2 = p;
			p2.Z++;
			n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
			f2 = &nodedef->get(n2);
			if(f2->drawtype == NDT_FENCELIKE)
			{
				aabb3f bar(-bar_rad,-bar_rad+BS/4,-bar_len+BS/2,
						bar_rad,bar_rad+BS/4,bar_len+BS/2);
				bar.MinEdge += pos;
				bar.MaxEdge += pos;
				f32 zrailuv[24]={
					3/16.,1/16.,5/16.,5/16., // cannot rotate; stretch
					4/16.,1/16.,6/16.,5/16., // for wood texture instead
					0/16.,9/16.,16/16.,11/16.,
					0/16.,6/16.,16/16.,8/16.,
					6/16.,6/16.,8/16.,8/16.,
					10/16.,10/16.,12/16.,12/16.};
				makeCuboid(&collector, bar, &tile_nocrack, 1,
						c, zrailuv);
				bar.MinEdge.Y -= BS/2;
				bar.MaxEdge.Y -= BS/2;
				makeCuboid(&collector, bar, &tile_nocrack, 1,
						c, zrailuv);
			}
		break;}
		case NDT_RAILLIKE:
		{
			bool is_rail_x [] = { false, false };  /* x-1, x+1 */
			bool is_rail_z [] = { false, false };  /* z-1, z+1 */

			bool is_rail_z_minus_y [] = { false, false };  /* z-1, z+1; y-1 */
			bool is_rail_x_minus_y [] = { false, false };  /* x-1, z+1; y-1 */
			bool is_rail_z_plus_y [] = { false, false };  /* z-1, z+1; y+1 */
			bool is_rail_x_plus_y [] = { false, false };  /* x-1, x+1; y+1 */

			MapNode n_minus_x = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x-1,y,z));
			MapNode n_plus_x = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x+1,y,z));
			MapNode n_minus_z = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y,z-1));
			MapNode n_plus_z = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y,z+1));
			MapNode n_plus_x_plus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x+1, y+1, z));
			MapNode n_plus_x_minus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x+1, y-1, z));
			MapNode n_minus_x_plus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x-1, y+1, z));
			MapNode n_minus_x_minus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x-1, y-1, z));
			MapNode n_plus_z_plus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x, y+1, z+1));
			MapNode n_minus_z_plus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x, y+1, z-1));
			MapNode n_plus_z_minus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x, y-1, z+1));
			MapNode n_minus_z_minus_y = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x, y-1, z-1));
			
			content_t thiscontent = n.getContent();
			if(n_minus_x.getContent() == thiscontent)
				is_rail_x[0] = true;
			if (n_minus_x_minus_y.getContent() == thiscontent)
				is_rail_x_minus_y[0] = true;
			if(n_minus_x_plus_y.getContent() == thiscontent)
				is_rail_x_plus_y[0] = true;

			if(n_plus_x.getContent() == thiscontent)
				is_rail_x[1] = true;
			if (n_plus_x_minus_y.getContent() == thiscontent)
				is_rail_x_minus_y[1] = true;
			if(n_plus_x_plus_y.getContent() == thiscontent)
				is_rail_x_plus_y[1] = true;

			if(n_minus_z.getContent() == thiscontent)
				is_rail_z[0] = true;
			if (n_minus_z_minus_y.getContent() == thiscontent)
				is_rail_z_minus_y[0] = true;
			if(n_minus_z_plus_y.getContent() == thiscontent)
				is_rail_z_plus_y[0] = true;

			if(n_plus_z.getContent() == thiscontent)
				is_rail_z[1] = true;
			if (n_plus_z_minus_y.getContent() == thiscontent)
				is_rail_z_minus_y[1] = true;
			if(n_plus_z_plus_y.getContent() == thiscontent)
				is_rail_z_plus_y[1] = true;

			bool is_rail_x_all[] = {false, false};
			bool is_rail_z_all[] = {false, false};
			is_rail_x_all[0]=is_rail_x[0] || is_rail_x_minus_y[0] || is_rail_x_plus_y[0];
			is_rail_x_all[1]=is_rail_x[1] || is_rail_x_minus_y[1] || is_rail_x_plus_y[1];
			is_rail_z_all[0]=is_rail_z[0] || is_rail_z_minus_y[0] || is_rail_z_plus_y[0];
			is_rail_z_all[1]=is_rail_z[1] || is_rail_z_minus_y[1] || is_rail_z_plus_y[1];

			// reasonable default, flat straight unrotated rail
			bool is_straight = true;
			int adjacencies = 0;
			int angle = 0;
			u8 tileindex = 0;

			// check for sloped rail
			if (is_rail_x_plus_y[0] || is_rail_x_plus_y[1] || is_rail_z_plus_y[0] || is_rail_z_plus_y[1])
			{
				adjacencies = 5; //5 means sloped
				is_straight = true; // sloped is always straight
			}
			else
			{
				// is really straight, rails on both sides
				is_straight = (is_rail_x_all[0] && is_rail_x_all[1]) || (is_rail_z_all[0] && is_rail_z_all[1]);
				adjacencies = is_rail_x_all[0] + is_rail_x_all[1] + is_rail_z_all[0] + is_rail_z_all[1];
			}

			switch (adjacencies) {
			case 1:
				if(is_rail_x_all[0] || is_rail_x_all[1])
					angle = 90;
				break;
			case 2:
				if(!is_straight)
					tileindex = 1; // curved
				if(is_rail_x_all[0] && is_rail_x_all[1])
					angle = 90;
				if(is_rail_z_all[0] && is_rail_z_all[1]){
					if (n_minus_z_plus_y.getContent() == thiscontent) angle = 180;
				}
				else if(is_rail_x_all[0] && is_rail_z_all[0])
					angle = 270;
				else if(is_rail_x_all[0] && is_rail_z_all[1])
					angle = 180;
				else if(is_rail_x_all[1] && is_rail_z_all[1])
					angle = 90;
				break;
			case 3:
				// here is where the potential to 'switch' a junction is, but not implemented at present
				tileindex = 2; // t-junction
				if(!is_rail_x_all[1])
					angle=180;
				if(!is_rail_z_all[0])
					angle=90;
				if(!is_rail_z_all[1])
					angle=270;
				break;
			case 4:
				tileindex = 3; // crossing
				break;
			case 5: //sloped
				if(is_rail_z_plus_y[0])
					angle = 180;
				if(is_rail_x_plus_y[0])
					angle = 90;
				if(is_rail_x_plus_y[1])
					angle = -90;
				break;
			default:
				break;
			}

			TileSpec tile = getNodeTileN(n, p, tileindex, data);
			tile.material_flags &= ~MATERIAL_FLAG_BACKFACE_CULLING;
			tile.material_flags |= MATERIAL_FLAG_CRACK_OVERLAY;

			AtlasPointer ap = tile.texture;
			
			u16 l = getInteriorLight(n, 0, data);
			video::SColor c = MapBlock_LightColor(255, l);

			float d = (float)BS/64;
			
			char g=-1;
			if (is_rail_x_plus_y[0] || is_rail_x_plus_y[1] || is_rail_z_plus_y[0] || is_rail_z_plus_y[1])
				g=1; //Object is at a slope

			video::S3DVertex vertices[4] =
			{
					video::S3DVertex(-BS/2,-BS/2+d,-BS/2, 0,0,0, c,
							ap.x0(), ap.y1()),
					video::S3DVertex(BS/2,-BS/2+d,-BS/2, 0,0,0, c,
							ap.x1(), ap.y1()),
					video::S3DVertex(BS/2,g*BS/2+d,BS/2, 0,0,0, c,
							ap.x1(), ap.y0()),
					video::S3DVertex(-BS/2,g*BS/2+d,BS/2, 0,0,0, c,
							ap.x0(), ap.y0()),
			};

			for(s32 i=0; i<4; i++)
			{
				if(angle != 0)
					vertices[i].Pos.rotateXZBy(angle);
				vertices[i].Pos += intToFloat(p, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			collector.append(tile, vertices, 4, indices, 6);
		break;}
		case NDT_NODEBOX:
		{
			TileSpec tiles[6];
			for(int i = 0; i < 6; i++)
			{
				tiles[i] = getNodeTileN(n, p, i, data);
			}

			u16 l = getInteriorLight(n, 0, data);
			video::SColor c = MapBlock_LightColor(255, l);

			v3f pos = intToFloat(p, BS);

			std::vector<aabb3f> boxes = n.getNodeBoxes(nodedef);
			for(std::vector<aabb3f>::iterator
					i = boxes.begin();
					i != boxes.end(); i++)
			{
				aabb3f box = *i;
				box.MinEdge += pos;
				box.MaxEdge += pos;

				// Compute texture coords
				f32 tx1 = (i->MinEdge.X/BS)+0.5;
				f32 ty1 = (i->MinEdge.Y/BS)+0.5;
				f32 tz1 = (i->MinEdge.Z/BS)+0.5;
				f32 tx2 = (i->MaxEdge.X/BS)+0.5;
				f32 ty2 = (i->MaxEdge.Y/BS)+0.5;
				f32 tz2 = (i->MaxEdge.Z/BS)+0.5;
				f32 txc[24] = {
					// up
					tx1, 1-tz2, tx2, 1-tz1,
					// down
					tx1, tz1, tx2, tz2,
					// right
					tz1, 1-ty2, tz2, 1-ty1,
					// left
					1-tz2, 1-ty2, 1-tz1, 1-ty1,
					// back
					1-tx2, 1-ty2, 1-tx1, 1-ty1,
					// front
					tx1, 1-ty2, tx2, 1-ty1,
				};

				makeCuboid(&collector, box, tiles, 6, c, txc);
			}
		break;}
		}
	}
}

Example #7

File: clientmap.cpp Project: 0gb-us/minetest

int ClientMap::getBackgroundBrightness(float max_d, u32 daylight_factor,
		int oldvalue, bool *sunlight_seen_result)
{
	const bool debugprint = false;
	INodeDefManager *ndef = m_gamedef->ndef();
	static v3f z_directions[50] = {
		v3f(-100, 0, 0)
	};
	static f32 z_offsets[sizeof(z_directions)/sizeof(*z_directions)] = {
		-1000,
	};
	if(z_directions[0].X < -99){
		for(u32 i=0; i<sizeof(z_directions)/sizeof(*z_directions); i++){
			z_directions[i] = v3f(
				0.01 * myrand_range(-100, 100),
				1.0,
				0.01 * myrand_range(-100, 100)
			);
			z_offsets[i] = 0.01 * myrand_range(0,100);
		}
	}
	if(debugprint)
		std::cerr<<"In goes "<<PP(m_camera_direction)<<", out comes ";
	int sunlight_seen_count = 0;
	float sunlight_min_d = max_d*0.8;
	if(sunlight_min_d > 35*BS)
		sunlight_min_d = 35*BS;
	std::vector<int> values;
	for(u32 i=0; i<sizeof(z_directions)/sizeof(*z_directions); i++){
		v3f z_dir = z_directions[i];
		z_dir.normalize();
		core::CMatrix4<f32> a;
		a.buildRotateFromTo(v3f(0,1,0), z_dir);
		v3f dir = m_camera_direction;
		a.rotateVect(dir);
		int br = 0;
		float step = BS*1.5;
		if(max_d > 35*BS)
			step = max_d / 35 * 1.5;
		float off = step * z_offsets[i];
		bool sunlight_seen_now = false;
		bool ok = getVisibleBrightness(this, m_camera_position, dir,
				step, 1.0, max_d*0.6+off, max_d, ndef, daylight_factor,
				sunlight_min_d,
				&br, &sunlight_seen_now);
		if(sunlight_seen_now)
			sunlight_seen_count++;
		if(!ok)
			continue;
		values.push_back(br);
		// Don't try too much if being in the sun is clear
		if(sunlight_seen_count >= 20)
			break;
	}
	int brightness_sum = 0;
	int brightness_count = 0;
	std::sort(values.begin(), values.end());
	u32 num_values_to_use = values.size();
	if(num_values_to_use >= 10)
		num_values_to_use -= num_values_to_use/2;
	else if(num_values_to_use >= 7)
		num_values_to_use -= num_values_to_use/3;
	u32 first_value_i = (values.size() - num_values_to_use) / 2;
	if(debugprint){
		for(u32 i=0; i < first_value_i; i++)
			std::cerr<<values[i]<<" ";
		std::cerr<<"[";
	}
	for(u32 i=first_value_i; i < first_value_i+num_values_to_use; i++){
		if(debugprint)
			std::cerr<<values[i]<<" ";
		brightness_sum += values[i];
		brightness_count++;
	}
	if(debugprint){
		std::cerr<<"]";
		for(u32 i=first_value_i+num_values_to_use; i < values.size(); i++)
			std::cerr<<values[i]<<" ";
	}
	int ret = 0;
	if(brightness_count == 0){
		MapNode n = getNodeNoEx(floatToInt(m_camera_position, BS));
		if(ndef->get(n).param_type == CPT_LIGHT){
			ret = decode_light(n.getLightBlend(daylight_factor, ndef));
		} else {
			ret = oldvalue;
			//ret = blend_light(255, 0, daylight_factor);
		}
	} else {
		/*float pre = (float)brightness_sum / (float)brightness_count;
		float tmp = pre;
		const float d = 0.2;
		pre *= 1.0 + d*2;
		pre -= tmp * d;
		int preint = pre;
		ret = MYMAX(0, MYMIN(255, preint));*/
		ret = brightness_sum / brightness_count;
	}
	if(debugprint)
		std::cerr<<"Result: "<<ret<<" sunlight_seen_count="
				<<sunlight_seen_count<<std::endl;
	*sunlight_seen_result = (sunlight_seen_count > 0);
	return ret;
}

Example #8

File: clientmap.cpp Project: 0gb-us/minetest

static bool getVisibleBrightness(Map *map, v3f p0, v3f dir, float step,
		float step_multiplier, float start_distance, float end_distance,
		INodeDefManager *ndef, u32 daylight_factor, float sunlight_min_d,
		int *result, bool *sunlight_seen)
{
	int brightness_sum = 0;
	int brightness_count = 0;
	float distance = start_distance;
	dir.normalize();
	v3f pf = p0;
	pf += dir * distance;
	int noncount = 0;
	bool nonlight_seen = false;
	bool allow_allowing_non_sunlight_propagates = false;
	bool allow_non_sunlight_propagates = false;
	// Check content nearly at camera position
	{
		v3s16 p = floatToInt(p0 /*+ dir * 3*BS*/, BS);
		MapNode n = map->getNodeNoEx(p);
		if(ndef->get(n).param_type == CPT_LIGHT &&
				!ndef->get(n).sunlight_propagates)
			allow_allowing_non_sunlight_propagates = true;
	}
	// If would start at CONTENT_IGNORE, start closer
	{
		v3s16 p = floatToInt(pf, BS);
		MapNode n = map->getNodeNoEx(p);
		if(n.getContent() == CONTENT_IGNORE){
			float newd = 2*BS;
			pf = p0 + dir * 2*newd;
			distance = newd;
			sunlight_min_d = 0;
		}
	}
	for(int i=0; distance < end_distance; i++){
		pf += dir * step;
		distance += step;
		step *= step_multiplier;
		
		v3s16 p = floatToInt(pf, BS);
		MapNode n = map->getNodeNoEx(p);
		if(allow_allowing_non_sunlight_propagates && i == 0 &&
				ndef->get(n).param_type == CPT_LIGHT &&
				!ndef->get(n).sunlight_propagates){
			allow_non_sunlight_propagates = true;
		}
		if(ndef->get(n).param_type != CPT_LIGHT ||
				(!ndef->get(n).sunlight_propagates &&
					!allow_non_sunlight_propagates)){
			nonlight_seen = true;
			noncount++;
			if(noncount >= 4)
				break;
			continue;
		}
		if(distance >= sunlight_min_d && *sunlight_seen == false
				&& nonlight_seen == false)
			if(n.getLight(LIGHTBANK_DAY, ndef) == LIGHT_SUN)
				*sunlight_seen = true;
		noncount = 0;
		brightness_sum += decode_light(n.getLightBlend(daylight_factor, ndef));
		brightness_count++;
	}
	*result = 0;
	if(brightness_count == 0)
		return false;
	*result = brightness_sum / brightness_count;
	/*std::cerr<<"Sampled "<<brightness_count<<" points; result="
			<<(*result)<<std::endl;*/
	return true;
}

Example #9

File: mapblock_mesh.cpp Project: asiekierka/minetest-delta

void getTileInfo(
		// Input:
		v3s16 blockpos_nodes,
		v3s16 p,
		v3s16 face_dir,
		u32 daynight_ratio,
		VoxelManipulator &vmanip,
		NodeModMap &temp_mods,
		bool smooth_lighting,
		// Output:
		bool &makes_face,
		v3s16 &p_corrected,
		v3s16 &face_dir_corrected,
		u8 *lights,
		TileSpec &tile
	)
{
	MapNode n0 = vmanip.getNodeNoEx(blockpos_nodes + p);
	MapNode n1 = vmanip.getNodeNoEx(blockpos_nodes + p + face_dir);
	TileSpec tile0 = getNodeTile(n0, p, face_dir, temp_mods);
	TileSpec tile1 = getNodeTile(n1, p + face_dir, -face_dir, temp_mods);
	
	// This is hackish
	u8 content0 = getNodeContent(p, n0, temp_mods);
	u8 content1 = getNodeContent(p + face_dir, n1, temp_mods);
	u8 mf = face_contents(content0, content1);

	if(mf == 0)
	{
		makes_face = false;
		return;
	}

	makes_face = true;
	
	if(mf == 1)
	{
		tile = tile0;
		p_corrected = p;
		face_dir_corrected = face_dir;
	}
	else
	{
		tile = tile1;
		p_corrected = p + face_dir;
		face_dir_corrected = -face_dir;
	}
	
	if(smooth_lighting == false)
	{
		lights[0] = lights[1] = lights[2] = lights[3] =
				decode_light(getFaceLight(daynight_ratio, n0, n1, face_dir));
	}
	else
	{
		v3s16 vertex_dirs[4];
		getNodeVertexDirs(face_dir_corrected, vertex_dirs);
		for(u16 i=0; i<4; i++)
		{
			lights[i] = getSmoothLight(blockpos_nodes + p_corrected,
					vertex_dirs[i], vmanip, daynight_ratio);
		}
	}
	
	return;
}

Example #10

File: mapblock_mesh.cpp Project: gourytch/freeminer

/*
	Calculate smooth lighting at the XYZ- corner of p.
	Both light banks
*/
static u16 getSmoothLightCombined(v3s16 p, MeshMakeData *data)
{
	static const v3s16 dirs8[8] = {
		v3s16(0,0,0),
		v3s16(0,0,1),
		v3s16(0,1,0),
		v3s16(0,1,1),
		v3s16(1,0,0),
		v3s16(1,1,0),
		v3s16(1,0,1),
		v3s16(1,1,1),
	};

	INodeDefManager *ndef = data->m_gamedef->ndef();

	u16 ambient_occlusion = 0;
	u16 light_count = 0;
	u8 light_source_max = 0;
	u16 light_day = 0;
	u16 light_night = 0;

	for (u32 i = 0; i < 8; i++)
	{
		MapNode n = data->m_vmanip.getNodeNoEx(p - dirs8[i]);

		// if it's CONTENT_IGNORE we can't do any light calculations
		if (n.getContent() == CONTENT_IGNORE) {
			continue;
		}

		const ContentFeatures &f = ndef->get(n);
		if (f.light_source > light_source_max)
			light_source_max = f.light_source;
		// Check f.solidness because fast-style leaves look better this way
		if (f.param_type == CPT_LIGHT && f.solidness != 2) {
			light_day += decode_light(n.getLight(LIGHTBANK_DAY, ndef));
			light_night += decode_light(n.getLight(LIGHTBANK_NIGHT, ndef));
			light_count++;
		} else {
			ambient_occlusion++;
		}
	}

	if(light_count == 0)
		return 0xffff;

	light_day /= light_count;
	light_night /= light_count;

	// Boost brightness around light sources
	bool skip_ambient_occlusion_day = false;
	if(decode_light(light_source_max) >= light_day) {
		light_day = decode_light(light_source_max);
		skip_ambient_occlusion_day = true;
	}

	bool skip_ambient_occlusion_night = false;
	if(decode_light(light_source_max) >= light_night) {
		light_night = decode_light(light_source_max);
		skip_ambient_occlusion_night = true;
	}

	if (ambient_occlusion > 4)
	{
		//table of precalculated gamma space multiply factors
		//light^2.2 * factor (0.75, 0.5, 0.25, 0.0), so table holds factor ^ (1 / 2.2)
		static const float light_amount[4] = { 0.877424315, 0.729740053, 0.532520545, 0.0 };

		//calculate table index for gamma space multiplier
		ambient_occlusion -= 5;

		if (!skip_ambient_occlusion_day)
			light_day = rangelim(core::round32(light_day*light_amount[ambient_occlusion]), 0, 255);
		if (!skip_ambient_occlusion_night)
			light_night = rangelim(core::round32(light_night*light_amount[ambient_occlusion]), 0, 255);
	}

	return light_day | (light_night << 8);
}

Example #11

File: mapblock_mesh.cpp Project: 4aiman/Magichet-stable

/*
	Calculate smooth lighting at the XYZ- corner of p.
	Both light banks
*/
static u16 getSmoothLightCombined(v3s16 p, MeshMakeData *data)
{
	static const v3s16 dirs8[8] = {
		v3s16(0,0,0),
		v3s16(0,0,1),
		v3s16(0,1,0),
		v3s16(0,1,1),
		v3s16(1,0,0),
		v3s16(1,1,0),
		v3s16(1,0,1),
		v3s16(1,1,1),
	};

	INodeDefManager *ndef = data->m_gamedef->ndef();

	u16 ambient_occlusion = 0;
	u16 light_count = 0;
	u8 light_source_max = 0;
	u16 light_day = 0;
	u16 light_night = 0;

	for (u32 i = 0; i < 8; i++)
	{
		const MapNode &n = data->m_vmanip.getNodeRefUnsafeCheckFlags(p - dirs8[i]);

		// if it's CONTENT_IGNORE we can't do any light calculations
		if (n.getContent() == CONTENT_IGNORE) {
			continue;
		}

		const ContentFeatures &f = ndef->get(n);
		if (f.light_source > light_source_max)
			light_source_max = f.light_source;
		// Check f.solidness because fast-style leaves look better this way
		if (f.param_type == CPT_LIGHT && f.solidness != 2) {
			light_day += decode_light(n.getLightNoChecks(LIGHTBANK_DAY, &f));
			light_night += decode_light(n.getLightNoChecks(LIGHTBANK_NIGHT, &f));
			light_count++;
		} else {
			ambient_occlusion++;
		}
	}

	if(light_count == 0)
		return 0xffff;

	light_day /= light_count;
	light_night /= light_count;

	// Boost brightness around light sources
	bool skip_ambient_occlusion_day = false;
	if(decode_light(light_source_max) >= light_day) {
		light_day = decode_light(light_source_max);
		skip_ambient_occlusion_day = true;
	}

	bool skip_ambient_occlusion_night = false;
	if(decode_light(light_source_max) >= light_night) {
		light_night = decode_light(light_source_max);
		skip_ambient_occlusion_night = true;
	}

	if (ambient_occlusion > 4)
	{
		static const float ao_gamma = rangelim(
			g_settings->getFloat("ambient_occlusion_gamma"), 0.25, 4.0);

		// Table of gamma space multiply factors.
		static const float light_amount[3] = {
			powf(0.75, 1.0 / ao_gamma),
			powf(0.5,  1.0 / ao_gamma),
			powf(0.25, 1.0 / ao_gamma)
		};

		//calculate table index for gamma space multiplier
		ambient_occlusion -= 5;

		if (!skip_ambient_occlusion_day)
			light_day = rangelim(core::round32(light_day*light_amount[ambient_occlusion]), 0, 255);
		if (!skip_ambient_occlusion_night)
			light_night = rangelim(core::round32(light_night*light_amount[ambient_occlusion]), 0, 255);
	}

	return light_day | (light_night << 8);
}

Example #12

File: content_mapblock.cpp Project: asiekierka/minetest-delta

void mapblock_mesh_generate_special(MeshMakeData *data,
		MeshCollector &collector)
{
	// 0ms
	//TimeTaker timer("mapblock_mesh_generate_special()");

	/*
		Some settings
	*/
	bool new_style_water = g_settings.getBool("new_style_water");
	bool new_style_leaves = g_settings.getBool("new_style_leaves");
	//bool smooth_lighting = g_settings.getBool("smooth_lighting");
	bool invisible_stone = g_settings.getBool("invisible_stone");
	
	float node_water_level = 1.0;
	if(new_style_water)
		node_water_level = 0.85;
	
	v3s16 blockpos_nodes = data->m_blockpos*MAP_BLOCKSIZE;

	// Flowing water material
	video::SMaterial material_water1;
	material_water1.setFlag(video::EMF_LIGHTING, false);
	material_water1.setFlag(video::EMF_BACK_FACE_CULLING, false);
	material_water1.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_water1.setFlag(video::EMF_FOG_ENABLE, true);
	material_water1.MaterialType = video::EMT_TRANSPARENT_VERTEX_ALPHA;
	AtlasPointer pa_water1 = g_texturesource->getTexture(
			g_texturesource->getTextureId("water.png"));
	material_water1.setTexture(0, pa_water1.atlas);

	// New-style leaves material
	video::SMaterial material_leaves1;
	material_leaves1.setFlag(video::EMF_LIGHTING, false);
	//material_leaves1.setFlag(video::EMF_BACK_FACE_CULLING, false);
	material_leaves1.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_leaves1.setFlag(video::EMF_FOG_ENABLE, true);
	material_leaves1.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
	AtlasPointer pa_leaves1 = g_texturesource->getTexture(
			g_texturesource->getTextureId("leaves.png"));
	material_leaves1.setTexture(0, pa_leaves1.atlas);

	// Glass material
	video::SMaterial material_glass;
	material_glass.setFlag(video::EMF_LIGHTING, false);
	material_glass.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_glass.setFlag(video::EMF_FOG_ENABLE, true);
	material_glass.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
	AtlasPointer pa_glass = g_texturesource->getTexture(
			g_texturesource->getTextureId("glass.png"));
	material_glass.setTexture(0, pa_glass.atlas);

	// Wood material
	video::SMaterial material_wood;
	material_wood.setFlag(video::EMF_LIGHTING, false);
	material_wood.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_wood.setFlag(video::EMF_FOG_ENABLE, true);
	material_wood.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
	AtlasPointer pa_wood = g_texturesource->getTexture(
			g_texturesource->getTextureId("wood.png"));
	material_wood.setTexture(0, pa_wood.atlas);

	// General ground material for special output
	// Texture is modified just before usage
	video::SMaterial material_general;
	material_general.setFlag(video::EMF_LIGHTING, false);
	material_general.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_general.setFlag(video::EMF_FOG_ENABLE, true);
	material_general.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;


	// Papyrus material
	video::SMaterial material_papyrus;
	material_papyrus.setFlag(video::EMF_LIGHTING, false);
	material_papyrus.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_papyrus.setFlag(video::EMF_FOG_ENABLE, true);
	material_papyrus.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
	AtlasPointer pa_papyrus = g_texturesource->getTexture(
			g_texturesource->getTextureId("papyrus.png"));
	material_papyrus.setTexture(0, pa_papyrus.atlas);
	for(s16 z=0; z<MAP_BLOCKSIZE; z++)
	for(s16 y=0; y<MAP_BLOCKSIZE; y++)
	for(s16 x=0; x<MAP_BLOCKSIZE; x++)
	{
		v3s16 p(x,y,z);

		MapNode n = data->m_vmanip.getNodeNoEx(blockpos_nodes+p);
		
		/*
			Add torches to mesh
		*/
		if(n.d == CONTENT_TORCH)
		{
			video::SColor c(255,255,255,255);

			// Wall at X+ of node
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,-BS/2,0, 0,0,0, c, 0,1),
				video::S3DVertex(BS/2,-BS/2,0, 0,0,0, c, 1,1),
				video::S3DVertex(BS/2,BS/2,0, 0,0,0, c, 1,0),
				video::S3DVertex(-BS/2,BS/2,0, 0,0,0, c, 0,0),
			};

			v3s16 dir = unpackDir(n.dir);

			for(s32 i=0; i<4; i++)
			{
				if(dir == v3s16(1,0,0))
					vertices[i].Pos.rotateXZBy(0);
				if(dir == v3s16(-1,0,0))
					vertices[i].Pos.rotateXZBy(180);
				if(dir == v3s16(0,0,1))
					vertices[i].Pos.rotateXZBy(90);
				if(dir == v3s16(0,0,-1))
					vertices[i].Pos.rotateXZBy(-90);
				if(dir == v3s16(0,-1,0))
					vertices[i].Pos.rotateXZBy(45);
				if(dir == v3s16(0,1,0))
					vertices[i].Pos.rotateXZBy(-45);

				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			// Set material
			video::SMaterial material;
			material.setFlag(video::EMF_LIGHTING, false);
			material.setFlag(video::EMF_BACK_FACE_CULLING, false);
			material.setFlag(video::EMF_BILINEAR_FILTER, false);
			//material.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL;
			material.MaterialType
					= video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;

			if(dir == v3s16(0,-1,0))
				material.setTexture(0,
						g_texturesource->getTextureRaw("torch_on_floor.png"));
			else if(dir == v3s16(0,1,0))
				material.setTexture(0,
						g_texturesource->getTextureRaw("torch_on_ceiling.png"));
			// For backwards compatibility
			else if(dir == v3s16(0,0,0))
				material.setTexture(0,
						g_texturesource->getTextureRaw("torch_on_floor.png"));
			else
				material.setTexture(0, 
						g_texturesource->getTextureRaw("torch.png"));

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(material, vertices, 4, indices, 6);
		}
		/*
			Signs on walls
		*/
		else if(n.d == CONTENT_SIGN_WALL)
		{
			u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio));
			video::SColor c(255,l,l,l);
				
			float d = (float)BS/16;
			// Wall at X+ of node
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(BS/2-d,-BS/2,-BS/2, 0,0,0, c, 0,1),
				video::S3DVertex(BS/2-d,-BS/2,BS/2, 0,0,0, c, 1,1),
				video::S3DVertex(BS/2-d,BS/2,BS/2, 0,0,0, c, 1,0),
				video::S3DVertex(BS/2-d,BS/2,-BS/2, 0,0,0, c, 0,0),
			};

			v3s16 dir = unpackDir(n.dir);

			for(s32 i=0; i<4; i++)
			{
				if(dir == v3s16(1,0,0))
					vertices[i].Pos.rotateXZBy(0);
				if(dir == v3s16(-1,0,0))
					vertices[i].Pos.rotateXZBy(180);
				if(dir == v3s16(0,0,1))
					vertices[i].Pos.rotateXZBy(90);
				if(dir == v3s16(0,0,-1))
					vertices[i].Pos.rotateXZBy(-90);
				if(dir == v3s16(0,-1,0))
					vertices[i].Pos.rotateXYBy(-90);
				if(dir == v3s16(0,1,0))
					vertices[i].Pos.rotateXYBy(90);

				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			// Set material
			video::SMaterial material;
			material.setFlag(video::EMF_LIGHTING, false);
			material.setFlag(video::EMF_BACK_FACE_CULLING, false);
			material.setFlag(video::EMF_BILINEAR_FILTER, false);
			material.setFlag(video::EMF_FOG_ENABLE, true);
			//material.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL;
			material.MaterialType
					= video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;

			material.setTexture(0, 
					g_texturesource->getTextureRaw("sign_wall.png"));

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(material, vertices, 4, indices, 6);
		}
		/*
			Add flowing water to mesh
		*/
		else if(n.d == CONTENT_WATER)
		{
			bool top_is_water = false;
			MapNode ntop = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y+1,z));
			if(ntop.d == CONTENT_WATER || ntop.d == CONTENT_WATERSOURCE)
				top_is_water = true;
			
			u8 l = 0;
			// Use the light of the node on top if possible
			if(content_features(ntop.d).param_type == CPT_LIGHT)
				l = decode_light(ntop.getLightBlend(data->m_daynight_ratio));
			// Otherwise use the light of this node (the water)
			else
				l = decode_light(n.getLightBlend(data->m_daynight_ratio));
			video::SColor c(WATER_ALPHA,l,l,l);
			
			// Neighbor water levels (key = relative position)
			// Includes current node
			core::map<v3s16, f32> neighbor_levels;
			core::map<v3s16, u8> neighbor_contents;
			core::map<v3s16, u8> neighbor_flags;
			const u8 neighborflag_top_is_water = 0x01;
			v3s16 neighbor_dirs[9] = {
				v3s16(0,0,0),
				v3s16(0,0,1),
				v3s16(0,0,-1),
				v3s16(1,0,0),
				v3s16(-1,0,0),
				v3s16(1,0,1),
				v3s16(-1,0,-1),
				v3s16(1,0,-1),
				v3s16(-1,0,1),
			};
			for(u32 i=0; i<9; i++)
			{
				u8 content = CONTENT_AIR;
				float level = -0.5 * BS;
				u8 flags = 0;
				// Check neighbor
				v3s16 p2 = p + neighbor_dirs[i];
				MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
				if(n2.d != CONTENT_IGNORE)
				{
					content = n2.d;

					if(n2.d == CONTENT_WATERSOURCE)
						level = (-0.5+node_water_level) * BS;
					else if(n2.d == CONTENT_WATER)
						level = (-0.5 + ((float)n2.param2 + 0.5) / 8.0
								* node_water_level) * BS;

					// Check node above neighbor.
					// NOTE: This doesn't get executed if neighbor
					//       doesn't exist
					p2.Y += 1;
					n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
					if(n2.d == CONTENT_WATERSOURCE || n2.d == CONTENT_WATER)
						flags |= neighborflag_top_is_water;
				}
				
				neighbor_levels.insert(neighbor_dirs[i], level);
				neighbor_contents.insert(neighbor_dirs[i], content);
				neighbor_flags.insert(neighbor_dirs[i], flags);
			}

			//float water_level = (-0.5 + ((float)n.param2 + 0.5) / 8.0) * BS;
			//float water_level = neighbor_levels[v3s16(0,0,0)];

			// Corner heights (average between four waters)
			f32 corner_levels[4];
			
			v3s16 halfdirs[4] = {
				v3s16(0,0,0),
				v3s16(1,0,0),
				v3s16(1,0,1),
				v3s16(0,0,1),
			};
			for(u32 i=0; i<4; i++)
			{
				v3s16 cornerdir = halfdirs[i];
				float cornerlevel = 0;
				u32 valid_count = 0;
				for(u32 j=0; j<4; j++)
				{
					v3s16 neighbordir = cornerdir - halfdirs[j];
					u8 content = neighbor_contents[neighbordir];
					// Special case for source nodes
					if(content == CONTENT_WATERSOURCE)
					{
						cornerlevel = (-0.5+node_water_level)*BS;
						valid_count = 1;
						break;
					}
					else if(content == CONTENT_WATER)
					{
						cornerlevel += neighbor_levels[neighbordir];
						valid_count++;
					}
					else if(content == CONTENT_AIR)
					{
						cornerlevel += -0.5*BS;
						valid_count++;
					}
				}
				if(valid_count > 0)
					cornerlevel /= valid_count;
				corner_levels[i] = cornerlevel;
			}

			/*
				Generate sides
			*/

			v3s16 side_dirs[4] = {
				v3s16(1,0,0),
				v3s16(-1,0,0),
				v3s16(0,0,1),
				v3s16(0,0,-1),
			};
			s16 side_corners[4][2] = {
				{1, 2},
				{3, 0},
				{2, 3},
				{0, 1},
			};
			for(u32 i=0; i<4; i++)
			{
				v3s16 dir = side_dirs[i];

				/*
					If our topside is water and neighbor's topside
					is water, don't draw side face
				*/
				if(top_is_water &&
						neighbor_flags[dir] & neighborflag_top_is_water)
					continue;

				u8 neighbor_content = neighbor_contents[dir];
				
				// Don't draw face if neighbor is not air or water
				if(neighbor_content != CONTENT_AIR
						&& neighbor_content != CONTENT_WATER)
					continue;
				
				bool neighbor_is_water = (neighbor_content == CONTENT_WATER);
				
				// Don't draw any faces if neighbor is water and top is water
				if(neighbor_is_water == true && top_is_water == false)
					continue;
				
				video::S3DVertex vertices[4] =
				{
					/*video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c, 0,1),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c, 1,1),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c, 1,0),
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c, 0,0),*/
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_water1.x0(), pa_water1.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_water1.x1(), pa_water1.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_water1.x1(), pa_water1.y0()),
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_water1.x0(), pa_water1.y0()),
				};
				
				/*
					If our topside is water, set upper border of face
					at upper border of node
				*/
				if(top_is_water)
				{
					vertices[2].Pos.Y = 0.5*BS;
					vertices[3].Pos.Y = 0.5*BS;
				}
				/*
					Otherwise upper position of face is corner levels
				*/
				else
				{
					vertices[2].Pos.Y = corner_levels[side_corners[i][0]];
					vertices[3].Pos.Y = corner_levels[side_corners[i][1]];
				}
				
				/*
					If neighbor is water, lower border of face is corner
					water levels
				*/
				if(neighbor_is_water)
				{
					vertices[0].Pos.Y = corner_levels[side_corners[i][1]];
					vertices[1].Pos.Y = corner_levels[side_corners[i][0]];
				}
				/*
					If neighbor is not water, lower border of face is
					lower border of node
				*/
				else
				{
					vertices[0].Pos.Y = -0.5*BS;
					vertices[1].Pos.Y = -0.5*BS;
				}
				
				for(s32 j=0; j<4; j++)
				{
					if(dir == v3s16(0,0,1))
						vertices[j].Pos.rotateXZBy(0);
					if(dir == v3s16(0,0,-1))
						vertices[j].Pos.rotateXZBy(180);
					if(dir == v3s16(-1,0,0))
						vertices[j].Pos.rotateXZBy(90);
					if(dir == v3s16(1,0,-0))
						vertices[j].Pos.rotateXZBy(-90);

					vertices[j].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_water1, vertices, 4, indices, 6);
			}
			
			/*
				Generate top side, if appropriate
			*/
			
			if(top_is_water == false)
			{
				video::S3DVertex vertices[4] =
				{
					/*video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c, 0,1),
					video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c, 1,1),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c, 1,0),
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c, 0,0),*/
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_water1.x0(), pa_water1.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_water1.x1(), pa_water1.y1()),
					video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c,
							pa_water1.x1(), pa_water1.y0()),
					video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c,
							pa_water1.x0(), pa_water1.y0()),
				};
				
				// This fixes a strange bug
				s32 corner_resolve[4] = {3,2,1,0};

				for(s32 i=0; i<4; i++)
				{
					//vertices[i].Pos.Y += water_level;
					//vertices[i].Pos.Y += neighbor_levels[v3s16(0,0,0)];
					s32 j = corner_resolve[i];
					vertices[i].Pos.Y += corner_levels[j];
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_water1, vertices, 4, indices, 6);
			}
		}
		/*
			Add water sources to mesh if using new style
		*/
		else if(n.d == CONTENT_WATERSOURCE && new_style_water)
		{
			//bool top_is_water = false;
			bool top_is_air = false;
			MapNode n = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y+1,z));
			/*if(n.d == CONTENT_WATER || n.d == CONTENT_WATERSOURCE)
				top_is_water = true;*/
			if(n.d == CONTENT_AIR)
				top_is_air = true;
			
			/*if(top_is_water == true)
				continue;*/
			if(top_is_air == false)
				continue;

			u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio));
			video::SColor c(WATER_ALPHA,l,l,l);
			
			video::S3DVertex vertices[4] =
			{
				/*video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c, 0,1),
				video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c, 1,1),
				video::S3DVertex(BS/2,0,BS/2, 0,0,0, c, 1,0),
				video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c, 0,0),*/
				video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
						pa_water1.x0(), pa_water1.y1()),
				video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
						pa_water1.x1(), pa_water1.y1()),
				video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c,
						pa_water1.x1(), pa_water1.y0()),
				video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c,
						pa_water1.x0(), pa_water1.y0()),
			};

			for(s32 i=0; i<4; i++)
			{
				vertices[i].Pos.Y += (-0.5+node_water_level)*BS;
				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(material_water1, vertices, 4, indices, 6);
		}
		/*
			Add leaves if using new style
		*/
		else if(n.d == CONTENT_LEAVES && new_style_leaves)
		{
			/*u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio));*/
			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio)));
			video::SColor c(255,l,l,l);

			for(u32 j=0; j<6; j++)
			{
				video::S3DVertex vertices[4] =
				{
					/*video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c, 0,1),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c, 1,1),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c, 1,0),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c, 0,0),*/
					video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x0(), pa_leaves1.y1()),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x1(), pa_leaves1.y1()),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x1(), pa_leaves1.y0()),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x0(), pa_leaves1.y0()),
				};

				if(j == 0)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(0);
				}
				else if(j == 1)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(180);
				}
				else if(j == 2)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-90);
				}
				else if(j == 3)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(90);
				}
				else if(j == 4)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(-90);
				}
				else if(j == 5)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(90);
				}

				for(u16 i=0; i<4; i++)
				{
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_leaves1, vertices, 4, indices, 6);
			}
		}
		/*
			Add glass
		*/
		else if(n.d == CONTENT_GLASS)
		{
			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio)));
			video::SColor c(255,l,l,l);

			for(u32 j=0; j<6; j++)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_glass.x0(), pa_glass.y1()),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_glass.x1(), pa_glass.y1()),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c,
						pa_glass.x1(), pa_glass.y0()),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c,
						pa_glass.x0(), pa_glass.y0()),
				};

				if(j == 0)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(0);
				}
				else if(j == 1)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(180);
				}
				else if(j == 2)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-90);
				}
				else if(j == 3)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(90);
				}
				else if(j == 4)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(-90);
				}
				else if(j == 5)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(90);
				}

				for(u16 i=0; i<4; i++)
				{
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_glass, vertices, 4, indices, 6);
			}
		}
		/*
			Add fence
		*/
		else if(n.d == CONTENT_FENCE)
		{
			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio)));
			video::SColor c(255,l,l,l);

			const f32 post_rad=(f32)BS/10;
			const f32 bar_rad=(f32)BS/20;
			const f32 bar_len=(f32)(BS/2)-post_rad;

			// The post - always present
			v3f pos = intToFloat(p+blockpos_nodes, BS);
			f32 postuv[24]={
					0.4,0.4,0.6,0.6,
					0.35,0,0.65,1,
					0.35,0,0.65,1,
					0.35,0,0.65,1,
					0.35,0,0.65,1,
					0.4,0.4,0.6,0.6};
			makeCuboid(material_wood, &collector,
				&pa_wood, c, pos,
				post_rad,BS/2,post_rad, postuv);

			// Now a section of fence, +X, if there's a post there
			v3s16 p2 = p;
			p2.X++;
			MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
			if(n2.d == CONTENT_FENCE)
			{
				pos = intToFloat(p+blockpos_nodes, BS);
				pos.X += BS/2;
				pos.Y += BS/4;
				f32 xrailuv[24]={
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6};
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_len,bar_rad,bar_rad, xrailuv);

				pos.Y -= BS/2;
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_len,bar_rad,bar_rad, xrailuv);
			}

			// Now a section of fence, +Z, if there's a post there
			p2 = p;
			p2.Z++;
			n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
			if(n2.d == CONTENT_FENCE)
			{
				pos = intToFloat(p+blockpos_nodes, BS);
				pos.Z += BS/2;
				pos.Y += BS/4;
				f32 zrailuv[24]={
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6};
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_rad,bar_rad,bar_len, zrailuv);
				pos.Y -= BS/2;
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_rad,bar_rad,bar_len, zrailuv);

			}

		}
#if 1
		/*
			Add stones with minerals if stone is invisible
		*/
		else if(n.d == CONTENT_STONE && invisible_stone && n.getMineral() != MINERAL_NONE)
		{
			for(u32 j=0; j<6; j++)
			{
				// NOTE: Hopefully g_6dirs[j] is the right direction...
				v3s16 dir = g_6dirs[j];
				/*u8 l = 0;
				MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + dir);
				if(content_features(n2.d).param_type == CPT_LIGHT)
					l = decode_light(n2.getLightBlend(data->m_daynight_ratio));
				else
					l = 255;*/
				u8 l = 255;
				video::SColor c(255,l,l,l);
				
				// Get the right texture
				TileSpec ts = n.getTile(dir);
				AtlasPointer ap = ts.texture;
				material_general.setTexture(0, ap.atlas);
				video::S3DVertex vertices[4] =
 				{
					/*video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c, 0,1),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c, 1,1),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c, 1,0),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c, 0,0),*/
					video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c,
						ap.x0(), ap.y1()),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c,
						ap.x1(), ap.y1()),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c,
						ap.x1(), ap.y0()),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c,
						ap.x0(), ap.y0()),
				};

				if(j == 0)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(0);
				}
				else if(j == 1)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(180);
				}
				else if(j == 2)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-90);
				}
				else if(j == 3)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(90);
				}
				else if(j == 4)

				for(u16 i=0; i<4; i++)
				{
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_general, vertices, 4, indices, 6);
			}
		}
#endif
		else if(n.d == CONTENT_PAPYRUS)
		{
			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio)));
			video::SColor c(255,l,l,l);

			for(u32 j=0; j<4; j++)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,-BS/2,0, 0,0,0, c,
						pa_papyrus.x0(), pa_papyrus.y1()),
					video::S3DVertex(BS/2,-BS/2,0, 0,0,0, c,
						pa_papyrus.x1(), pa_papyrus.y1()),
					video::S3DVertex(BS/2,BS/2,0, 0,0,0, c,
						pa_papyrus.x1(), pa_papyrus.y0()),
					video::S3DVertex(-BS/2,BS/2,0, 0,0,0, c,
						pa_papyrus.x0(), pa_papyrus.y0()),
				};

				if(j == 0)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(45);
				}
				else if(j == 1)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-45);
				}
				else if(j == 2)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(135);
				}
				else if(j == 3)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-135);
				}

				for(u16 i=0; i<4; i++)
				{
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_papyrus, vertices, 4, indices, 6);
			}
		}
		else if(n.d == CONTENT_RAIL)
		{
			u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio));
			video::SColor c(255,l,l,l);

			bool is_rail_x [] = { false, false };  /* x-1, x+1 */
			bool is_rail_z [] = { false, false };  /* z-1, z+1 */

			MapNode n_minus_x = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x-1,y,z));
			MapNode n_plus_x = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x+1,y,z));
			MapNode n_minus_z = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y,z-1));
			MapNode n_plus_z = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y,z+1));

			if(n_minus_x.d == CONTENT_RAIL)
				is_rail_x[0] = true;
			if(n_plus_x.d == CONTENT_RAIL)
				is_rail_x[1] = true;
			if(n_minus_z.d == CONTENT_RAIL)
				is_rail_z[0] = true;
			if(n_plus_z.d == CONTENT_RAIL)
				is_rail_z[1] = true;

			float d = (float)BS/16;
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,-BS/2+d,-BS/2, 0,0,0, c,
					0, 1),
				video::S3DVertex(BS/2,-BS/2+d,-BS/2, 0,0,0, c,
					1, 1),
				video::S3DVertex(BS/2,-BS/2+d,BS/2, 0,0,0, c,
					1, 0),
				video::S3DVertex(-BS/2,-BS/2+d,BS/2, 0,0,0, c,
					0, 0),
			};

			video::SMaterial material_rail;
			material_rail.setFlag(video::EMF_LIGHTING, false);
			material_rail.setFlag(video::EMF_BACK_FACE_CULLING, false);
			material_rail.setFlag(video::EMF_BILINEAR_FILTER, false);
			material_rail.setFlag(video::EMF_FOG_ENABLE, true);
			material_rail.MaterialType
					= video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;

			int adjacencies = is_rail_x[0] + is_rail_x[1] + is_rail_z[0] + is_rail_z[1];

			// Assign textures
			if(adjacencies < 2)
				material_rail.setTexture(0, g_texturesource->getTextureRaw("rail.png"));
			else if(adjacencies == 2)
			{
				if((is_rail_x[0] && is_rail_x[1]) || (is_rail_z[0] && is_rail_z[1]))
					material_rail.setTexture(0, g_texturesource->getTextureRaw("rail.png"));
				else
					material_rail.setTexture(0, g_texturesource->getTextureRaw("rail_curved.png"));
			}
			else if(adjacencies == 3)
				material_rail.setTexture(0, g_texturesource->getTextureRaw("rail_t_junction.png"));
			else if(adjacencies == 4)
				material_rail.setTexture(0, g_texturesource->getTextureRaw("rail_crossing.png"));

			// Rotate textures
			int angle = 0;

			if(adjacencies == 1)
			{
				if(is_rail_x[0] || is_rail_x[1])
					angle = 90;
			}
			else if(adjacencies == 2)
			{
				if(is_rail_x[0] && is_rail_x[1])
					angle = 90;
				else if(is_rail_x[0] && is_rail_z[0])
					angle = 270;
				else if(is_rail_x[0] && is_rail_z[1])
					angle = 180;
				else if(is_rail_x[1] && is_rail_z[1])
					angle = 90;
			}
			else if(adjacencies == 3)
			{
				if(!is_rail_x[0])
					angle=0;
				if(!is_rail_x[1])
					angle=180;
				if(!is_rail_z[0])
					angle=90;
				if(!is_rail_z[1])
					angle=270;
			}

			if(angle != 0) {
				for(u16 i=0; i<4; i++)
					vertices[i].Pos.rotateXZBy(angle);
			}

			for(s32 i=0; i<4; i++)
			{
				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			collector.append(material_rail, vertices, 4, indices, 6);
		}
	}
}

Example #13

File: content_mapblock.cpp Project: bcmpinc/minetest

void mapblock_mesh_generate_special(MeshMakeData *data,
		MeshCollector &collector, IGameDef *gamedef)
{
	INodeDefManager *nodedef = gamedef->ndef();

	// 0ms
	//TimeTaker timer("mapblock_mesh_generate_special()");

	/*
		Some settings
	*/
	bool new_style_water = g_settings->getBool("new_style_water");
	
	float node_liquid_level = 1.0;
	if(new_style_water)
		node_liquid_level = 0.85;
	
	v3s16 blockpos_nodes = data->m_blockpos*MAP_BLOCKSIZE;

	/*// General ground material for special output
	// Texture is modified just before usage
	video::SMaterial material_general;
	material_general.setFlag(video::EMF_LIGHTING, false);
	material_general.setFlag(video::EMF_BILINEAR_FILTER, false);
	material_general.setFlag(video::EMF_FOG_ENABLE, true);
	material_general.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;*/

	for(s16 z=0; z<MAP_BLOCKSIZE; z++)
	for(s16 y=0; y<MAP_BLOCKSIZE; y++)
	for(s16 x=0; x<MAP_BLOCKSIZE; x++)
	{
		v3s16 p(x,y,z);

		MapNode n = data->m_vmanip.getNodeNoEx(blockpos_nodes+p);
		const ContentFeatures &f = nodedef->get(n);

		// Only solidness=0 stuff is drawn here
		if(f.solidness != 0)
			continue;
		
		switch(f.drawtype){
		default:
			infostream<<"Got "<<f.drawtype<<std::endl;
			assert(0);
			break;
		case NDT_AIRLIKE:
			break;
		case NDT_LIQUID:
		{
			/*
				Add water sources to mesh if using new style
			*/
			assert(nodedef->get(n).special_materials[0]);
			//assert(nodedef->get(n).special_materials[1]);
			assert(nodedef->get(n).special_aps[0]);

			video::SMaterial &liquid_material =
					*nodedef->get(n).special_materials[0];
			/*video::SMaterial &liquid_material_bfculled =
					*nodedef->get(n).special_materials[1];*/
			AtlasPointer &pa_liquid1 =
					*nodedef->get(n).special_aps[0];

			bool top_is_air = false;
			MapNode n = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y+1,z));
			if(n.getContent() == CONTENT_AIR)
				top_is_air = true;
			
			if(top_is_air == false)
				continue;

			u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio, nodedef));
			video::SColor c = MapBlock_LightColor(
					nodedef->get(n).alpha, l);
			
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
						pa_liquid1.x0(), pa_liquid1.y1()),
				video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
						pa_liquid1.x1(), pa_liquid1.y1()),
				video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c,
						pa_liquid1.x1(), pa_liquid1.y0()),
				video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c,
						pa_liquid1.x0(), pa_liquid1.y0()),
			};

			for(s32 i=0; i<4; i++)
			{
				vertices[i].Pos.Y += (-0.5+node_liquid_level)*BS;
				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(liquid_material, vertices, 4, indices, 6);
		break;}
		case NDT_FLOWINGLIQUID:
		{
			/*
				Add flowing liquid to mesh
			*/
			assert(nodedef->get(n).special_materials[0]);
			assert(nodedef->get(n).special_materials[1]);
			assert(nodedef->get(n).special_aps[0]);

			video::SMaterial &liquid_material =
					*nodedef->get(n).special_materials[0];
			video::SMaterial &liquid_material_bfculled =
					*nodedef->get(n).special_materials[1];
			AtlasPointer &pa_liquid1 =
					*nodedef->get(n).special_aps[0];

			bool top_is_same_liquid = false;
			MapNode ntop = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y+1,z));
			content_t c_flowing = nodedef->getId(nodedef->get(n).liquid_alternative_flowing);
			content_t c_source = nodedef->getId(nodedef->get(n).liquid_alternative_source);
			if(ntop.getContent() == c_flowing || ntop.getContent() == c_source)
				top_is_same_liquid = true;
			
			u8 l = 0;
			// Use the light of the node on top if possible
			if(nodedef->get(ntop).param_type == CPT_LIGHT)
				l = decode_light(ntop.getLightBlend(data->m_daynight_ratio, nodedef));
			// Otherwise use the light of this node (the liquid)
			else
				l = decode_light(n.getLightBlend(data->m_daynight_ratio, nodedef));
			video::SColor c = MapBlock_LightColor(
					nodedef->get(n).alpha, l);
			
			// Neighbor liquid levels (key = relative position)
			// Includes current node
			core::map<v3s16, f32> neighbor_levels;
			core::map<v3s16, content_t> neighbor_contents;
			core::map<v3s16, u8> neighbor_flags;
			const u8 neighborflag_top_is_same_liquid = 0x01;
			v3s16 neighbor_dirs[9] = {
				v3s16(0,0,0),
				v3s16(0,0,1),
				v3s16(0,0,-1),
				v3s16(1,0,0),
				v3s16(-1,0,0),
				v3s16(1,0,1),
				v3s16(-1,0,-1),
				v3s16(1,0,-1),
				v3s16(-1,0,1),
			};
			for(u32 i=0; i<9; i++)
			{
				content_t content = CONTENT_AIR;
				float level = -0.5 * BS;
				u8 flags = 0;
				// Check neighbor
				v3s16 p2 = p + neighbor_dirs[i];
				MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
				if(n2.getContent() != CONTENT_IGNORE)
				{
					content = n2.getContent();

					if(n2.getContent() == c_source)
						level = (-0.5+node_liquid_level) * BS;
					else if(n2.getContent() == c_flowing)
						level = (-0.5 + ((float)(n2.param2&LIQUID_LEVEL_MASK)
								+ 0.5) / 8.0 * node_liquid_level) * BS;

					// Check node above neighbor.
					// NOTE: This doesn't get executed if neighbor
					//       doesn't exist
					p2.Y += 1;
					n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
					if(n2.getContent() == c_source ||
							n2.getContent() == c_flowing)
						flags |= neighborflag_top_is_same_liquid;
				}
				
				neighbor_levels.insert(neighbor_dirs[i], level);
				neighbor_contents.insert(neighbor_dirs[i], content);
				neighbor_flags.insert(neighbor_dirs[i], flags);
			}

			// Corner heights (average between four liquids)
			f32 corner_levels[4];
			
			v3s16 halfdirs[4] = {
				v3s16(0,0,0),
				v3s16(1,0,0),
				v3s16(1,0,1),
				v3s16(0,0,1),
			};
			for(u32 i=0; i<4; i++)
			{
				v3s16 cornerdir = halfdirs[i];
				float cornerlevel = 0;
				u32 valid_count = 0;
				u32 air_count = 0;
				for(u32 j=0; j<4; j++)
				{
					v3s16 neighbordir = cornerdir - halfdirs[j];
					content_t content = neighbor_contents[neighbordir];
					// If top is liquid, draw starting from top of node
					if(neighbor_flags[neighbordir] &
							neighborflag_top_is_same_liquid)
					{
						cornerlevel = 0.5*BS;
						valid_count = 1;
						break;
					}
					// Source is always the same height
					else if(content == c_source)
					{
						cornerlevel = (-0.5+node_liquid_level)*BS;
						valid_count = 1;
						break;
					}
					// Flowing liquid has level information
					else if(content == c_flowing)
					{
						cornerlevel += neighbor_levels[neighbordir];
						valid_count++;
					}
					else if(content == CONTENT_AIR)
					{
						air_count++;
					}
				}
				if(air_count >= 2)
					cornerlevel = -0.5*BS;
				else if(valid_count > 0)
					cornerlevel /= valid_count;
				corner_levels[i] = cornerlevel;
			}

			/*
				Generate sides
			*/

			v3s16 side_dirs[4] = {
				v3s16(1,0,0),
				v3s16(-1,0,0),
				v3s16(0,0,1),
				v3s16(0,0,-1),
			};
			s16 side_corners[4][2] = {
				{1, 2},
				{3, 0},
				{2, 3},
				{0, 1},
			};
			for(u32 i=0; i<4; i++)
			{
				v3s16 dir = side_dirs[i];

				/*
					If our topside is liquid and neighbor's topside
					is liquid, don't draw side face
				*/
				if(top_is_same_liquid &&
						neighbor_flags[dir] & neighborflag_top_is_same_liquid)
					continue;

				content_t neighbor_content = neighbor_contents[dir];
				const ContentFeatures &n_feat = nodedef->get(neighbor_content);
				
				// Don't draw face if neighbor is blocking the view
				if(n_feat.solidness == 2)
					continue;
				
				bool neighbor_is_same_liquid = (neighbor_content == c_source
						|| neighbor_content == c_flowing);
				
				// Don't draw any faces if neighbor same is liquid and top is
				// same liquid
				if(neighbor_is_same_liquid == true
						&& top_is_same_liquid == false)
					continue;

				// Use backface culled material if neighbor doesn't have a
				// solidness of 0
				video::SMaterial *current_material = &liquid_material;
				if(n_feat.solidness != 0 || n_feat.visual_solidness != 0)
					current_material = &liquid_material_bfculled;
				
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_liquid1.x0(), pa_liquid1.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_liquid1.x1(), pa_liquid1.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_liquid1.x1(), pa_liquid1.y0()),
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_liquid1.x0(), pa_liquid1.y0()),
				};
				
				/*
					If our topside is liquid, set upper border of face
					at upper border of node
				*/
				if(top_is_same_liquid)
				{
					vertices[2].Pos.Y = 0.5*BS;
					vertices[3].Pos.Y = 0.5*BS;
				}
				/*
					Otherwise upper position of face is corner levels
				*/
				else
				{
					vertices[2].Pos.Y = corner_levels[side_corners[i][0]];
					vertices[3].Pos.Y = corner_levels[side_corners[i][1]];
				}
				
				/*
					If neighbor is liquid, lower border of face is corner
					liquid levels
				*/
				if(neighbor_is_same_liquid)
				{
					vertices[0].Pos.Y = corner_levels[side_corners[i][1]];
					vertices[1].Pos.Y = corner_levels[side_corners[i][0]];
				}
				/*
					If neighbor is not liquid, lower border of face is
					lower border of node
				*/
				else
				{
					vertices[0].Pos.Y = -0.5*BS;
					vertices[1].Pos.Y = -0.5*BS;
				}
				
				for(s32 j=0; j<4; j++)
				{
					if(dir == v3s16(0,0,1))
						vertices[j].Pos.rotateXZBy(0);
					if(dir == v3s16(0,0,-1))
						vertices[j].Pos.rotateXZBy(180);
					if(dir == v3s16(-1,0,0))
						vertices[j].Pos.rotateXZBy(90);
					if(dir == v3s16(1,0,-0))
						vertices[j].Pos.rotateXZBy(-90);
						
					// Do this to not cause glitches when two liquids are
					// side-by-side
					/*if(neighbor_is_same_liquid == false){
						vertices[j].Pos.X *= 0.98;
						vertices[j].Pos.Z *= 0.98;
					}*/

					vertices[j].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(*current_material, vertices, 4, indices, 6);
			}
			
			/*
				Generate top side, if appropriate
			*/
			
			if(top_is_same_liquid == false)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,0,BS/2, 0,0,0, c,
							pa_liquid1.x0(), pa_liquid1.y1()),
					video::S3DVertex(BS/2,0,BS/2, 0,0,0, c,
							pa_liquid1.x1(), pa_liquid1.y1()),
					video::S3DVertex(BS/2,0,-BS/2, 0,0,0, c,
							pa_liquid1.x1(), pa_liquid1.y0()),
					video::S3DVertex(-BS/2,0,-BS/2, 0,0,0, c,
							pa_liquid1.x0(), pa_liquid1.y0()),
				};
				
				// This fixes a strange bug
				s32 corner_resolve[4] = {3,2,1,0};

				for(s32 i=0; i<4; i++)
				{
					//vertices[i].Pos.Y += liquid_level;
					//vertices[i].Pos.Y += neighbor_levels[v3s16(0,0,0)];
					s32 j = corner_resolve[i];
					vertices[i].Pos.Y += corner_levels[j];
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(liquid_material, vertices, 4, indices, 6);
			}
		break;}
		case NDT_GLASSLIKE:
		{
			video::SMaterial material_glass;
			material_glass.setFlag(video::EMF_LIGHTING, false);
			material_glass.setFlag(video::EMF_BILINEAR_FILTER, false);
			material_glass.setFlag(video::EMF_FOG_ENABLE, true);
			material_glass.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			AtlasPointer pa_glass = f.tiles[0].texture;
			material_glass.setTexture(0, pa_glass.atlas);

			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio, nodedef)));
			video::SColor c = MapBlock_LightColor(255, l);

			for(u32 j=0; j<6; j++)
			{
				// Check this neighbor
				v3s16 n2p = blockpos_nodes + p + g_6dirs[j];
				MapNode n2 = data->m_vmanip.getNodeNoEx(n2p);
				// Don't make face if neighbor is of same type
				if(n2.getContent() == n.getContent())
					continue;

				// The face at Z+
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_glass.x0(), pa_glass.y1()),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_glass.x1(), pa_glass.y1()),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c,
						pa_glass.x1(), pa_glass.y0()),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c,
						pa_glass.x0(), pa_glass.y0()),
				};
				
				// Rotations in the g_6dirs format
				if(j == 0) // Z+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(0);
				else if(j == 1) // Y+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(-90);
				else if(j == 2) // X+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-90);
				else if(j == 3) // Z-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(180);
				else if(j == 4) // Y-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(90);
				else if(j == 5) // X-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(90);

				for(u16 i=0; i<4; i++){
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_glass, vertices, 4, indices, 6);
			}
		break;}
		case NDT_ALLFACES:
		{
			video::SMaterial material_leaves1;
			material_leaves1.setFlag(video::EMF_LIGHTING, false);
			material_leaves1.setFlag(video::EMF_BILINEAR_FILTER, false);
			material_leaves1.setFlag(video::EMF_FOG_ENABLE, true);
			material_leaves1.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			AtlasPointer pa_leaves1 = f.tiles[0].texture;
			material_leaves1.setTexture(0, pa_leaves1.atlas);

			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio, nodedef)));
			video::SColor c = MapBlock_LightColor(255, l);

			for(u32 j=0; j<6; j++)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x0(), pa_leaves1.y1()),
					video::S3DVertex(BS/2,-BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x1(), pa_leaves1.y1()),
					video::S3DVertex(BS/2,BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x1(), pa_leaves1.y0()),
					video::S3DVertex(-BS/2,BS/2,BS/2, 0,0,0, c,
						pa_leaves1.x0(), pa_leaves1.y0()),
				};

				// Rotations in the g_6dirs format
				if(j == 0) // Z+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(0);
				else if(j == 1) // Y+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(-90);
				else if(j == 2) // X+
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-90);
				else if(j == 3) // Z-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(180);
				else if(j == 4) // Y-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateYZBy(90);
				else if(j == 5) // X-
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(90);

				for(u16 i=0; i<4; i++){
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_leaves1, vertices, 4, indices, 6);
			}
		break;}
		case NDT_ALLFACES_OPTIONAL:
			// This is always pre-converted to something else
			assert(0);
			break;
		case NDT_TORCHLIKE:
		{
			v3s16 dir = unpackDir(n.param2);
			
			AtlasPointer ap(0);
			if(dir == v3s16(0,-1,0)){
				ap = f.tiles[0].texture; // floor
			} else if(dir == v3s16(0,1,0)){
				ap = f.tiles[1].texture; // ceiling
			// For backwards compatibility
			} else if(dir == v3s16(0,0,0)){
				ap = f.tiles[0].texture; // floor
			} else {
				ap = f.tiles[2].texture; // side
			}

			// Set material
			video::SMaterial material;
			material.setFlag(video::EMF_LIGHTING, false);
			material.setFlag(video::EMF_BACK_FACE_CULLING, false);
			material.setFlag(video::EMF_BILINEAR_FILTER, false);
			material.setFlag(video::EMF_FOG_ENABLE, true);
			//material.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL;
			material.MaterialType
					= video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			material.setTexture(0, ap.atlas);

			video::SColor c(255,255,255,255);

			// Wall at X+ of node
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,-BS/2,0, 0,0,0, c,
						ap.x0(), ap.y1()),
				video::S3DVertex(BS/2,-BS/2,0, 0,0,0, c,
						ap.x1(), ap.y1()),
				video::S3DVertex(BS/2,BS/2,0, 0,0,0, c,
						ap.x1(), ap.y0()),
				video::S3DVertex(-BS/2,BS/2,0, 0,0,0, c,
						ap.x0(), ap.y0()),
			};

			for(s32 i=0; i<4; i++)
			{
				if(dir == v3s16(1,0,0))
					vertices[i].Pos.rotateXZBy(0);
				if(dir == v3s16(-1,0,0))
					vertices[i].Pos.rotateXZBy(180);
				if(dir == v3s16(0,0,1))
					vertices[i].Pos.rotateXZBy(90);
				if(dir == v3s16(0,0,-1))
					vertices[i].Pos.rotateXZBy(-90);
				if(dir == v3s16(0,-1,0))
					vertices[i].Pos.rotateXZBy(45);
				if(dir == v3s16(0,1,0))
					vertices[i].Pos.rotateXZBy(-45);

				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(material, vertices, 4, indices, 6);
		break;}
		case NDT_SIGNLIKE:
		{
			// Set material
			video::SMaterial material;
			material.setFlag(video::EMF_LIGHTING, false);
			material.setFlag(video::EMF_BACK_FACE_CULLING, false);
			material.setFlag(video::EMF_BILINEAR_FILTER, false);
			material.setFlag(video::EMF_FOG_ENABLE, true);
			material.MaterialType
					= video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			AtlasPointer ap = f.tiles[0].texture;
			material.setTexture(0, ap.atlas);

			u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio, nodedef));
			video::SColor c = MapBlock_LightColor(255, l);
				
			float d = (float)BS/16;
			// Wall at X+ of node
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(BS/2-d,-BS/2,-BS/2, 0,0,0, c,
						ap.x0(), ap.y1()),
				video::S3DVertex(BS/2-d,-BS/2,BS/2, 0,0,0, c,
						ap.x1(), ap.y1()),
				video::S3DVertex(BS/2-d,BS/2,BS/2, 0,0,0, c,
						ap.x1(), ap.y0()),
				video::S3DVertex(BS/2-d,BS/2,-BS/2, 0,0,0, c,
						ap.x0(), ap.y0()),
			};

			v3s16 dir = unpackDir(n.param2);

			for(s32 i=0; i<4; i++)
			{
				if(dir == v3s16(1,0,0))
					vertices[i].Pos.rotateXZBy(0);
				if(dir == v3s16(-1,0,0))
					vertices[i].Pos.rotateXZBy(180);
				if(dir == v3s16(0,0,1))
					vertices[i].Pos.rotateXZBy(90);
				if(dir == v3s16(0,0,-1))
					vertices[i].Pos.rotateXZBy(-90);
				if(dir == v3s16(0,-1,0))
					vertices[i].Pos.rotateXYBy(-90);
				if(dir == v3s16(0,1,0))
					vertices[i].Pos.rotateXYBy(90);

				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			// Add to mesh collector
			collector.append(material, vertices, 4, indices, 6);
		break;}
		case NDT_PLANTLIKE:
		{
			video::SMaterial material_papyrus;
			material_papyrus.setFlag(video::EMF_LIGHTING, false);
			material_papyrus.setFlag(video::EMF_BILINEAR_FILTER, false);
			material_papyrus.setFlag(video::EMF_FOG_ENABLE, true);
			material_papyrus.MaterialType=video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			AtlasPointer pa_papyrus = f.tiles[0].texture;
			material_papyrus.setTexture(0, pa_papyrus.atlas);
			
			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio, nodedef)));
			video::SColor c = MapBlock_LightColor(255, l);

			for(u32 j=0; j<4; j++)
			{
				video::S3DVertex vertices[4] =
				{
					video::S3DVertex(-BS/2*f.visual_scale,-BS/2,0, 0,0,0, c,
						pa_papyrus.x0(), pa_papyrus.y1()),
					video::S3DVertex( BS/2*f.visual_scale,-BS/2,0, 0,0,0, c,
						pa_papyrus.x1(), pa_papyrus.y1()),
					video::S3DVertex( BS/2*f.visual_scale,
						-BS/2 + f.visual_scale*BS,0, 0,0,0, c,
						pa_papyrus.x1(), pa_papyrus.y0()),
					video::S3DVertex(-BS/2*f.visual_scale,
						-BS/2 + f.visual_scale*BS,0, 0,0,0, c,
						pa_papyrus.x0(), pa_papyrus.y0()),
				};

				if(j == 0)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(45);
				}
				else if(j == 1)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-45);
				}
				else if(j == 2)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(135);
				}
				else if(j == 3)
				{
					for(u16 i=0; i<4; i++)
						vertices[i].Pos.rotateXZBy(-135);
				}

				for(u16 i=0; i<4; i++)
				{
					vertices[i].Pos *= f.visual_scale;
					vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
				}

				u16 indices[] = {0,1,2,2,3,0};
				// Add to mesh collector
				collector.append(material_papyrus, vertices, 4, indices, 6);
			}
		break;}
		case NDT_FENCELIKE:
		{
			video::SMaterial material_wood;
			material_wood.setFlag(video::EMF_LIGHTING, false);
			material_wood.setFlag(video::EMF_BILINEAR_FILTER, false);
			material_wood.setFlag(video::EMF_FOG_ENABLE, true);
			material_wood.MaterialType = video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			AtlasPointer pa_wood = f.tiles[0].texture;
			material_wood.setTexture(0, pa_wood.atlas);

			u8 l = decode_light(undiminish_light(n.getLightBlend(data->m_daynight_ratio, nodedef)));
			video::SColor c = MapBlock_LightColor(255, l);

			const f32 post_rad=(f32)BS/10;
			const f32 bar_rad=(f32)BS/20;
			const f32 bar_len=(f32)(BS/2)-post_rad;

			// The post - always present
			v3f pos = intToFloat(p+blockpos_nodes, BS);
			f32 postuv[24]={
					0.4,0.4,0.6,0.6,
					0.35,0,0.65,1,
					0.35,0,0.65,1,
					0.35,0,0.65,1,
					0.35,0,0.65,1,
					0.4,0.4,0.6,0.6};
			makeCuboid(material_wood, &collector,
				&pa_wood, c, pos,
				post_rad,BS/2,post_rad, postuv);

			// Now a section of fence, +X, if there's a post there
			v3s16 p2 = p;
			p2.X++;
			MapNode n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
			const ContentFeatures *f2 = &nodedef->get(n2);
			if(f2->drawtype == NDT_FENCELIKE)
			{
				pos = intToFloat(p+blockpos_nodes, BS);
				pos.X += BS/2;
				pos.Y += BS/4;
				f32 xrailuv[24]={
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6};
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_len,bar_rad,bar_rad, xrailuv);

				pos.Y -= BS/2;
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_len,bar_rad,bar_rad, xrailuv);
			}

			// Now a section of fence, +Z, if there's a post there
			p2 = p;
			p2.Z++;
			n2 = data->m_vmanip.getNodeNoEx(blockpos_nodes + p2);
			f2 = &nodedef->get(n2);
			if(f2->drawtype == NDT_FENCELIKE)
			{
				pos = intToFloat(p+blockpos_nodes, BS);
				pos.Z += BS/2;
				pos.Y += BS/4;
				f32 zrailuv[24]={
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6,
					0,0.4,1,0.6};
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_rad,bar_rad,bar_len, zrailuv);
				pos.Y -= BS/2;
				makeCuboid(material_wood, &collector,
					&pa_wood, c, pos,
					bar_rad,bar_rad,bar_len, zrailuv);

			}
		break;}
		case NDT_RAILLIKE:
		{
			bool is_rail_x [] = { false, false };  /* x-1, x+1 */
			bool is_rail_z [] = { false, false };  /* z-1, z+1 */

			MapNode n_minus_x = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x-1,y,z));
			MapNode n_plus_x = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x+1,y,z));
			MapNode n_minus_z = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y,z-1));
			MapNode n_plus_z = data->m_vmanip.getNodeNoEx(blockpos_nodes + v3s16(x,y,z+1));
			
			content_t thiscontent = n.getContent();
			if(n_minus_x.getContent() == thiscontent)
				is_rail_x[0] = true;
			if(n_plus_x.getContent() == thiscontent)
				is_rail_x[1] = true;
			if(n_minus_z.getContent() == thiscontent)
				is_rail_z[0] = true;
			if(n_plus_z.getContent() == thiscontent)
				is_rail_z[1] = true;

			int adjacencies = is_rail_x[0] + is_rail_x[1] + is_rail_z[0] + is_rail_z[1];

			// Assign textures
			AtlasPointer ap = f.tiles[0].texture; // straight
			if(adjacencies < 2)
				ap = f.tiles[0].texture; // straight
			else if(adjacencies == 2)
			{
				if((is_rail_x[0] && is_rail_x[1]) || (is_rail_z[0] && is_rail_z[1]))
					ap = f.tiles[0].texture; // straight
				else
					ap = f.tiles[1].texture; // curved
			}
			else if(adjacencies == 3)
				ap = f.tiles[2].texture; // t-junction
			else if(adjacencies == 4)
				ap = f.tiles[3].texture; // crossing
			
			video::SMaterial material_rail;
			material_rail.setFlag(video::EMF_LIGHTING, false);
			material_rail.setFlag(video::EMF_BACK_FACE_CULLING, false);
			material_rail.setFlag(video::EMF_BILINEAR_FILTER, false);
			material_rail.setFlag(video::EMF_FOG_ENABLE, true);
			material_rail.MaterialType
					= video::EMT_TRANSPARENT_ALPHA_CHANNEL_REF;
			material_rail.setTexture(0, ap.atlas);

			u8 l = decode_light(n.getLightBlend(data->m_daynight_ratio, nodedef));
			video::SColor c = MapBlock_LightColor(255, l);

			float d = (float)BS/16;
			video::S3DVertex vertices[4] =
			{
				video::S3DVertex(-BS/2,-BS/2+d,-BS/2, 0,0,0, c,
						ap.x0(), ap.y1()),
				video::S3DVertex(BS/2,-BS/2+d,-BS/2, 0,0,0, c,
						ap.x1(), ap.y1()),
				video::S3DVertex(BS/2,-BS/2+d,BS/2, 0,0,0, c,
						ap.x1(), ap.y0()),
				video::S3DVertex(-BS/2,-BS/2+d,BS/2, 0,0,0, c,
						ap.x0(), ap.y0()),
			};

			// Rotate textures
			int angle = 0;

			if(adjacencies == 1)
			{
				if(is_rail_x[0] || is_rail_x[1])
					angle = 90;
			}
			else if(adjacencies == 2)
			{
				if(is_rail_x[0] && is_rail_x[1])
					angle = 90;
				else if(is_rail_x[0] && is_rail_z[0])
					angle = 270;
				else if(is_rail_x[0] && is_rail_z[1])
					angle = 180;
				else if(is_rail_x[1] && is_rail_z[1])
					angle = 90;
			}
			else if(adjacencies == 3)
			{
				if(!is_rail_x[0])
					angle=0;
				if(!is_rail_x[1])
					angle=180;
				if(!is_rail_z[0])
					angle=90;
				if(!is_rail_z[1])
					angle=270;
			}

			if(angle != 0) {
				for(u16 i=0; i<4; i++)
					vertices[i].Pos.rotateXZBy(angle);
			}

			for(s32 i=0; i<4; i++)
			{
				vertices[i].Pos += intToFloat(p + blockpos_nodes, BS);
			}

			u16 indices[] = {0,1,2,2,3,0};
			collector.append(material_rail, vertices, 4, indices, 6);
		break;}
		}
	}
}

Example #14

File: camera.cpp Project: Jobava/Voxelands

void Camera::update(LocalPlayer* player, f32 frametime, v2u32 screensize)
{
	// Set player node transformation
	m_playernode->setPosition(player->getPosition());
	m_playernode->setRotation(v3f(0, -1 * player->getYaw(), 0));
	m_playernode->updateAbsolutePosition();

	// Set head node transformation
	m_headnode->setPosition(player->getEyeOffset());
	m_headnode->setRotation(v3f(player->getPitch(), 0, 0));
	m_headnode->updateAbsolutePosition();

	// Compute relative camera position and target
	v3f rel_cam_pos = v3f(0,0,0);
	v3f rel_cam_target = v3f(0,0,1);
	v3f rel_cam_up = v3f(0,1,0);

	if (m_view_bobbing_state != 0 && m_view_bobbing_anim != 0) {
		f32 bobfrac = my_modf(m_view_bobbing_anim * 2);
		f32 bobdir = (m_view_bobbing_anim < 0.5) ? 1.0 : -1.0;
		f32 bobknob = 1.2;
		f32 bobtmp = sin(pow(bobfrac, bobknob) * PI);

		v3f bobvec = v3f(
			0.3 * bobdir * sin(bobfrac * PI),
			-0.28 * bobtmp * bobtmp,
			0.);

		float f = 1.0;
		f *= m_view_bobbing_amount;
		rel_cam_pos += bobvec * f;
		rel_cam_target += bobvec * f;
		rel_cam_target.Z -= 0.005 * bobvec.Z * f;
		rel_cam_up.rotateXYBy(-0.03 * bobdir * bobtmp * PI * f);

	}

	// Compute absolute camera position and target
	m_headnode->getAbsoluteTransformation().transformVect(m_camera_position, rel_cam_pos);
	m_headnode->getAbsoluteTransformation().rotateVect(m_camera_direction, rel_cam_target - rel_cam_pos);

	v3f abs_cam_up;
	m_headnode->getAbsoluteTransformation().rotateVect(abs_cam_up, rel_cam_up);

	// Update offset if too far away from the center of the map

	m_camera_offset.X += CAMERA_OFFSET_STEP*
			(((s16)(m_camera_position.X/BS) - m_camera_offset.X)/CAMERA_OFFSET_STEP);
	m_camera_offset.Y += CAMERA_OFFSET_STEP*
			(((s16)(m_camera_position.Y/BS) - m_camera_offset.Y)/CAMERA_OFFSET_STEP);
	m_camera_offset.Z += CAMERA_OFFSET_STEP*
			(((s16)(m_camera_position.Z/BS) - m_camera_offset.Z)/CAMERA_OFFSET_STEP);

	// Set camera node transformation
	m_cameranode->setPosition(m_camera_position-intToFloat(m_camera_offset, BS));
	m_cameranode->setUpVector(abs_cam_up);
	// *100.0 helps in large map coordinates
	m_cameranode->setTarget(m_camera_position-intToFloat(m_camera_offset, BS) + 100 * m_camera_direction);

	// FOV and aspect ratio
	m_aspect = (f32)screensize.X / (f32) screensize.Y;
	m_fov_y = m_fov * PI / 180.0;
	m_fov_x = 2 * atan(0.5 * m_aspect * tan(m_fov_y));
	m_cameranode->setAspectRatio(m_aspect);
	m_cameranode->setFOV(m_fov_y);

	// Position the wielded item
	v3f wield_position = m_wieldnode_baseposition;
	v3f wield_rotation = m_wieldnode_baserotation;
	if (m_digging_button != -1) {
		f32 digfrac = m_digging_anim;
		wield_position.X -= 30 * sin(pow(digfrac, 0.8f) * PI);
		wield_position.Y += 15 * sin(digfrac * 2 * PI);
		wield_position.Z += 5 * digfrac;

		// Euler angles are PURE EVIL, so why not use quaternions?
		core::quaternion quat_begin(wield_rotation * core::DEGTORAD);
		core::quaternion quat_end(v3f(90, -10, -130) * core::DEGTORAD);
		core::quaternion quat_slerp;
		quat_slerp.slerp(quat_begin, quat_end, sin(digfrac * PI));
		quat_slerp.toEuler(wield_rotation);
		wield_rotation *= core::RADTODEG;
	}else{
		f32 bobfrac = my_modf(m_view_bobbing_anim);
		wield_position.X -= sin(bobfrac*PI*2.0) * 3.0;
		wield_position.Y += sin(my_modf(bobfrac*2.0)*PI) * 3.0;
	}
	m_wieldnode->setPosition(wield_position);
	m_wieldnode->setRotation(wield_rotation);

	u8 li = decode_light(player->light);
	// Set brightness one lower than incoming light
	diminish_light(li);
	m_wieldnode->updateLight(li);

	// Render distance feedback loop
	updateViewingRange(frametime);

	// If the player seems to be walking on solid ground,
	// view bobbing is enabled and free_move is off,
	// start (or continue) the view bobbing animation.
	v3f speed = player->getSpeed();
	if (
		(hypot(speed.X, speed.Z) > BS)
		&& (player->touching_ground)
		&& m_view_bobbing == true
		&& player->control.free == false
	) {
		// Start animation
		m_view_bobbing_state = 1;
		m_view_bobbing_speed = MYMIN(speed.getLength(), 60)*1.2;
	}else if (m_view_bobbing_state == 1) {
		// Stop animation
		m_view_bobbing_state = 2;
		m_view_bobbing_speed = 60;
	}
}

Example #15

File: itemdef.cpp Project: AngelCry/minetest

    ClientCached* createClientCachedDirect(const std::string &name,
                                           IGameDef *gamedef) const
    {
        infostream<<"Lazily creating item texture and mesh for \""
                  <<name<<"\""<<std::endl;

        // This is not thread-safe
        assert(get_current_thread_id() == m_main_thread);

        // Skip if already in cache
        ClientCached *cc = NULL;
        m_clientcached.get(name, &cc);
        if(cc)
            return cc;

        ITextureSource *tsrc = gamedef->getTextureSource();
        INodeDefManager *nodedef = gamedef->getNodeDefManager();
        IrrlichtDevice *device = tsrc->getDevice();
        video::IVideoDriver *driver = device->getVideoDriver();
        const ItemDefinition *def = &get(name);

        // Create new ClientCached
        cc = new ClientCached();

        bool need_node_mesh = false;

        // Create an inventory texture
        cc->inventory_texture = NULL;
        if(def->inventory_image != "")
        {
            cc->inventory_texture = tsrc->getTextureRaw(def->inventory_image);
        }
        else if(def->type == ITEM_NODE)
        {
            need_node_mesh = true;
        }

        // Create a wield mesh
        assert(cc->wield_mesh == NULL);
        if(def->type == ITEM_NODE && def->wield_image == "")
        {
            need_node_mesh = true;
        }
        else if(def->wield_image != "" || def->inventory_image != "")
        {
            // Extrude the wield image into a mesh

            std::string imagename;
            if(def->wield_image != "")
                imagename = def->wield_image;
            else
                imagename = def->inventory_image;

            cc->wield_mesh = createExtrudedMesh(
                                 tsrc->getTextureRaw(imagename),
                                 driver,
                                 def->wield_scale * v3f(40.0, 40.0, 4.0));
            if(cc->wield_mesh == NULL)
            {
                infostream<<"ItemDefManager: WARNING: "
                          <<"updateTexturesAndMeshes(): "
                          <<"Unable to create extruded mesh for item "
                          <<def->name<<std::endl;
            }
        }

        if(need_node_mesh)
        {
            /*
            	Get node properties
            */
            content_t id = nodedef->getId(def->name);
            const ContentFeatures &f = nodedef->get(id);

            u8 param1 = 0;
            if(f.param_type == CPT_LIGHT)
                param1 = 0xee;

            /*
            	Make a mesh from the node
            */
            MeshMakeData mesh_make_data(gamedef);
            MapNode mesh_make_node(id, param1, 0);
            mesh_make_data.fillSingleNode(&mesh_make_node);
            MapBlockMesh mapblock_mesh(&mesh_make_data);

            scene::IMesh *node_mesh = mapblock_mesh.getMesh();
            assert(node_mesh);
            video::SColor c(255, 255, 255, 255);
            if(g_settings->getS32("enable_shaders") != 0)
                c = MapBlock_LightColor(255, 0xffff, decode_light(f.light_source));
            setMeshColor(node_mesh, c);

            /*
            	Scale and translate the mesh so it's a unit cube
            	centered on the origin
            */
            scaleMesh(node_mesh, v3f(1.0/BS, 1.0/BS, 1.0/BS));
            translateMesh(node_mesh, v3f(-1.0, -1.0, -1.0));

            /*
            	Draw node mesh into a render target texture
            */
            if(cc->inventory_texture == NULL)
            {
                core::dimension2d<u32> dim(64,64);
                std::string rtt_texture_name = "INVENTORY_"
                                               + def->name + "_RTT";
                v3f camera_position(0, 1.0, -1.5);
                camera_position.rotateXZBy(45);
                v3f camera_lookat(0, 0, 0);
                core::CMatrix4<f32> camera_projection_matrix;
                // Set orthogonal projection
                camera_projection_matrix.buildProjectionMatrixOrthoLH(
                    1.65, 1.65, 0, 100);

                video::SColorf ambient_light(0.2,0.2,0.2);
                v3f light_position(10, 100, -50);
                video::SColorf light_color(0.5,0.5,0.5);
                f32 light_radius = 1000;

                cc->inventory_texture = generateTextureFromMesh(
                                            node_mesh, device, dim, rtt_texture_name,
                                            camera_position,
                                            camera_lookat,
                                            camera_projection_matrix,
                                            ambient_light,
                                            light_position,
                                            light_color,
                                            light_radius);

                // render-to-target didn't work
                if(cc->inventory_texture == NULL)
                {
                    cc->inventory_texture =
                        tsrc->getTextureRaw(f.tiledef[0].name);
                }
            }
            else
            {
                if (m_driver == 0)
                    m_driver = driver;

                m_extruded_textures.push_back(cc->inventory_texture);
            }

            /*
            	Use the node mesh as the wield mesh
            */

            // Scale to proper wield mesh proportions
            scaleMesh(node_mesh, v3f(30.0, 30.0, 30.0)
                      * def->wield_scale);

            cc->wield_mesh = node_mesh;
            cc->wield_mesh->grab();

            //no way reference count can be smaller than 2 in this place!
            assert(cc->wield_mesh->getReferenceCount() >= 2);
        }

        // Put in cache
        m_clientcached.set(name, cc);

        return cc;
    }