/* c_irq_handler - custom irq handler called by assembly irq handler
after state has been saved/restored appropriately.
Parameters: None
*/
void c_irq_handler(){
unsigned stamp;
mmio_t oscr = (mmio_t)OSCR;
mmio_t ossr = (mmio_t)OSSR;
mmio_t osmr0 = (mmio_t)OSMR_0;
if(*ossr & OSSR_M0){
//keep global time by checking if oscr has overlapped start_time
if(lastoscr<start_time && *oscr>=start_time){
rollovercount++;
}
lastoscr = *oscr;
dotime(&stamp);
//set next interrupt for 10ms later
*osmr0 = *oscr + OSTMR_FREQ/100;
//unset interrupts
*ossr |= OSSR_M0;
//update devices and switch to highest prio task
dev_update((unsigned long)stamp);
dispatch_save();
}
if(*ossr & OSSR_M1)
*ossr |= OSSR_M1;
if(*ossr & OSSR_M2)
*ossr |= OSSR_M2;
if(*ossr & OSSR_M3)
*ossr |= OSSR_M3;
}
void irq_handler(void) {
disable_interrupts();
irq_time ++;
dev_update(irq_time);
reg_set(OSTMR_OSSR_ADDR, OSTMR_OSSR_M0);
reg_write(OSTMR_OSCR_ADDR, TIMER_CLEAR);
/* Wait for timer to reset */
while(((volatile unsigned)reg_read(INT_ICPR_ADDR) >>INT_OSTMR_0) & 0x1);
dispatch_save();
}
// This function is called on all IRQ interrupts
void timer_inc(void)
{
uint32_t ossr;
/* increment the number of the timer ticks */
++num_timer_tick;
/* add clocks to OSMR */
osmr_count += CLOCKS_PER_TICK;
reg_write(OSTMR_OSMR_ADDR(0), osmr_count);
/* acknowledge interupt and set OSSR */
ossr = reg_read(OSTMR_OSSR_ADDR);
ossr |= OSTMR_OSSR_M0;
reg_write(OSTMR_OSSR_ADDR, ossr);
/* wake up any tasks waiting on devices */
dev_update(num_timer_tick * MS_PER_TICK);
}
//dispatch the handler
void C_IRQ_handler(){
/* Check that a time interrupt has occured, if not, ignore it */
/* Check if interrupt controller irq pending reg. bit 26 is set */
if((reg_read(OSTMR_OSSR_ADDR) & OSTMR_OSSR_M0) && (reg_read(INT_ICPR_ADDR) >> INT_OSTMR_0)) {
// Increment time by 10ms
sys_time += 10;
//clear the OSCR
reg_write(OSTMR_OSCR_ADDR, 0);
// Writing a 1 to the bit acknowledges the match and hence, clears that bit
reg_set(OSTMR_OSSR_ADDR, OSTMR_OSSR_M0);
dev_update(sys_time);
}
}
/* IRQ_Handler updates system time whenever OS timer match 0 IRQ is serviced */
void irq_handler() {
// ensure the irq is that from the match0 and counter0
if (reg_read(INT_ICPR_ADDR) & (1 << 26)) {
// update the current time
current_time += 10;
//handshake
reg_set(OSTMR_OSSR_ADDR,OSTMR_OSSR_M0);
// call again in 10 millis
unsigned new_time = (unsigned)CLOCK_TO_10_MILLI + reg_read(OSTMR_OSCR_ADDR);
reg_write(OSTMR_OSMR_ADDR(0), new_time);
if (task_created) {
dev_update(current_time);
}
}
}
struct resp_data handle_server_msg(struct server_msg server_messege,
struct status_data *status)
{
struct resp_data resp_server;
switch(server_messege.srv_cmd)
{
case 0:
dev_update();
break;
case 1:
dev_restart();
break;
case 2:
*status = dev_status_handle();
break;
case 3:
dev_log();
break;
default:
uagent_printf(MSG_ERROR,"No such server command!");
}
resp_server.srv_cmd = server_messege.srv_cmd;
return resp_server;
}
