static int test_post_bind(struct udevice *dev)
{
dm_testdrv_op_count[DM_TEST_OP_POST_BIND]++;
ut_assert(!device_active(dev));
return 0;
}
/**
* check_vidconsole_output() - Run a text console test
*
* @uts: Test state
* @rot: Console rotation (0, 90, 180, 270)
* @wrap_size: Expected size of compressed frame buffer for the wrap test
* @scroll_size: Same for the scroll test
* @return 0 on success
*/
static int check_vidconsole_output(struct unit_test_state *uts, int rot,
int wrap_size, int scroll_size)
{
struct udevice *dev, *con;
struct sandbox_sdl_plat *plat;
int i;
ut_assertok(uclass_find_device(UCLASS_VIDEO, 0, &dev));
ut_assert(!device_active(dev));
plat = dev_get_platdata(dev);
plat->rot = rot;
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
ut_asserteq(46, compress_frame_buffer(dev));
/* Check display wrap */
for (i = 0; i < 120; i++)
vidconsole_put_char(con, 'A' + i % 50);
ut_asserteq(wrap_size, compress_frame_buffer(dev));
/* Check display scrolling */
for (i = 0; i < SCROLL_LINES; i++) {
vidconsole_put_char(con, 'A' + i % 50);
vidconsole_put_char(con, '\n');
}
ut_asserteq(scroll_size, compress_frame_buffer(dev));
/* If we scroll enough, the screen becomes blank again */
for (i = 0; i < SCROLL_LINES; i++)
vidconsole_put_char(con, '\n');
ut_asserteq(46, compress_frame_buffer(dev));
return 0;
}
/* Test that we can use the swapcase device correctly */
static int dm_test_pci_swapcase(struct unit_test_state *uts)
{
struct udevice *emul, *swap;
ulong io_addr, mem_addr;
char *ptr;
/* Check that asking for the device automatically fires up PCI */
ut_assertok(uclass_get_device(UCLASS_PCI_EMUL, 0, &emul));
ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap));
ut_assert(device_active(swap));
/* First test I/O */
io_addr = dm_pci_read_bar32(swap, 0);
outb(2, io_addr);
ut_asserteq(2, inb(io_addr));
/*
* Now test memory mapping - note we must unmap and remap to cause
* the swapcase emulation to see our data and response.
*/
mem_addr = dm_pci_read_bar32(swap, 1);
ptr = map_sysmem(mem_addr, 20);
strcpy(ptr, "This is a TesT");
unmap_sysmem(ptr);
ptr = map_sysmem(mem_addr, 20);
ut_asserteq_str("tHIS IS A tESt", ptr);
unmap_sysmem(ptr);
return 0;
}
static int eth_write_hwaddr(struct udevice *dev)
{
struct eth_pdata *pdata = dev->platdata;
int ret = 0;
if (!dev || !device_active(dev))
return -EINVAL;
/* seq is valid since the device is active */
if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
if (!is_valid_ethaddr(pdata->enetaddr)) {
printf("\nError: %s address %pM illegal value\n",
dev->name, pdata->enetaddr);
return -EINVAL;
}
/*
* Drivers are allowed to decide not to implement this at
* run-time. E.g. Some devices may use it and some may not.
*/
ret = eth_get_ops(dev)->write_hwaddr(dev);
if (ret == -ENOSYS)
ret = 0;
if (ret)
printf("\nWarning: %s failed to set MAC address\n",
dev->name);
}
return ret;
}
/**
* show_osd() - Display information about a OSD device
*
* Display a device's ID (sequence number), and whether it is active (i.e.
* probed) or not.
*
* @osd: OSD device to print information for
*/
static void show_osd(struct udevice *osd)
{
printf("OSD %d:\t%s", osd->req_seq, osd->name);
if (device_active(osd))
printf(" (active %d)", osd->seq);
printf("\n");
}
int eth_rx(void)
{
struct udevice *current;
uchar *packet;
int flags;
int ret;
int i;
current = eth_get_dev();
if (!current)
return -ENODEV;
if (!device_active(current))
return -EINVAL;
/* Process up to 32 packets at one time */
flags = ETH_RECV_CHECK_DEVICE;
for (i = 0; i < 32; i++) {
ret = eth_get_ops(current)->recv(current, flags, &packet);
flags = 0;
if (ret > 0)
net_process_received_packet(packet, ret);
if (ret >= 0 && eth_get_ops(current)->free_pkt)
eth_get_ops(current)->free_pkt(current, packet, ret);
if (ret <= 0)
break;
}
if (ret == -EAGAIN)
ret = 0;
if (ret < 0) {
/* We cannot completely return the error at present */
debug("%s: recv() returned error %d\n", __func__, ret);
}
return ret;
}
static int get_function(struct udevice *dev, int offset, bool skip_unused,
const char **namep)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct dm_gpio_ops *ops = gpio_get_ops(dev);
BUILD_BUG_ON(GPIOF_COUNT != ARRAY_SIZE(gpio_function));
if (!device_active(dev))
return -ENODEV;
if (offset < 0 || offset >= uc_priv->gpio_count)
return -EINVAL;
if (namep)
*namep = uc_priv->name[offset];
if (skip_unused && !uc_priv->name[offset])
return GPIOF_UNUSED;
if (ops->get_function) {
int ret;
ret = ops->get_function(dev, offset);
if (ret < 0)
return ret;
if (ret >= ARRAY_SIZE(gpio_function))
return -ENODATA;
return ret;
}
return GPIOF_UNKNOWN;
}
static int test_post_probe(struct udevice *dev)
{
struct udevice *prev = list_entry(dev->uclass_node.prev,
struct udevice, uclass_node);
struct dm_test_uclass_perdev_priv *priv = dev_get_uclass_priv(dev);
struct uclass *uc = dev->uclass;
dm_testdrv_op_count[DM_TEST_OP_POST_PROBE]++;
ut_assert(priv);
ut_assert(device_active(dev));
priv->base_add = 0;
if (dms->skip_post_probe)
return 0;
if (&prev->uclass_node != &uc->dev_head) {
struct dm_test_uclass_perdev_priv *prev_uc_priv
= dev_get_uclass_priv(prev);
struct dm_test_pdata *pdata = prev->platdata;
ut_assert(pdata);
ut_assert(prev_uc_priv);
priv->base_add = prev_uc_priv->base_add + pdata->ping_add;
}
return 0;
}
void
wskbd_input(device_t dev, u_int type, int value)
{
struct wskbd_softc *sc = device_private(dev);
#if NWSDISPLAY > 0
int num, i;
#endif
if (sc->sc_repeating) {
sc->sc_repeating = 0;
callout_stop(&sc->sc_repeat_ch);
}
device_active(dev, DVA_HARDWARE);
#if NWSDISPLAY > 0
/*
* If /dev/wskbdN is not connected in event mode translate and
* send upstream.
*/
if (sc->sc_translating) {
num = wskbd_translate(sc->id, type, value);
if (num > 0) {
if (sc->sc_base.me_dispdv != NULL) {
#ifdef WSDISPLAY_SCROLLSUPPORT
if (sc->id->t_symbols [0] != KS_Print_Screen) {
wsdisplay_scroll(sc->sc_base.
me_dispdv, WSDISPLAY_SCROLL_RESET);
}
#endif
for (i = 0; i < num; i++)
wsdisplay_kbdinput(
sc->sc_base.me_dispdv,
sc->id->t_symbols[i]);
}
if (sc->sc_keyrepeat_data.del1 != 0) {
sc->sc_repeating = num;
callout_schedule(&sc->sc_repeat_ch,
mstohz(sc->sc_keyrepeat_data.del1));
}
}
return;
}
#endif
wskbd_deliver_event(sc, type, value);
#if defined(WSKBD_EVENT_AUTOREPEAT)
/* Repeat key presses if set. */
if (type == WSCONS_EVENT_KEY_DOWN && sc->sc_keyrepeat_data.del1 != 0) {
sc->sc_repeat_type = type;
sc->sc_repeat_value = value;
sc->sc_repeating = 1;
callout_schedule(&sc->sc_repeat_ch,
mstohz(sc->sc_keyrepeat_data.del1));
}
#endif /* defined(WSKBD_EVENT_AUTOREPEAT) */
}
/* Test that we can find block devices without probing them */
static int dm_test_blk_find(struct unit_test_state *uts)
{
struct udevice *blk, *dev;
ut_assertok(blk_create_device(gd->dm_root, "sandbox_host_blk", "test",
IF_TYPE_HOST, 1, 512, 2, &blk));
ut_asserteq(-ENODEV, blk_find_device(IF_TYPE_HOST, 0, &dev));
ut_assertok(blk_find_device(IF_TYPE_HOST, 1, &dev));
ut_asserteq_ptr(blk, dev);
ut_asserteq(false, device_active(dev));
/* Now activate it */
ut_assertok(blk_get_device(IF_TYPE_HOST, 1, &dev));
ut_asserteq_ptr(blk, dev);
ut_asserteq(true, device_active(dev));
return 0;
}
struct mmc *mmc_get_mmc_dev(struct udevice *dev)
{
struct mmc_uclass_priv *upriv;
if (!device_active(dev))
return NULL;
upriv = dev_get_uclass_priv(dev);
return upriv->mmc;
}
/* Test obtaining an LED by label */
static int dm_test_led_label(struct unit_test_state *uts)
{
struct udevice *dev, *cmp;
ut_assertok(led_get_by_label("sandbox:red", &dev));
ut_asserteq(1, device_active(dev));
ut_assertok(uclass_get_device(UCLASS_LED, 1, &cmp));
ut_asserteq_ptr(dev, cmp);
ut_assertok(led_get_by_label("sandbox:green", &dev));
ut_asserteq(1, device_active(dev));
ut_assertok(uclass_get_device(UCLASS_LED, 2, &cmp));
ut_asserteq_ptr(dev, cmp);
ut_asserteq(-ENODEV, led_get_by_label("sandbox:blue", &dev));
return 0;
}
int eth_is_active(struct udevice *dev)
{
struct eth_device_priv *priv;
if (!dev || !device_active(dev))
return 0;
priv = dev_get_uclass_priv(dev);
return priv->state == ETH_STATE_ACTIVE;
}
/*
* Typically this will just store a device pointer.
* In case it was not probed, we will attempt to do so.
* dev may be NULL to unset the active device.
*/
void eth_set_dev(struct udevice *dev)
{
if (dev && !device_active(dev)) {
eth_errno = device_probe(dev);
if (eth_errno)
dev = NULL;
}
eth_get_uclass_priv()->current = dev;
}
static int test_pre_probe(struct udevice *dev)
{
struct dm_test_uclass_perdev_priv *priv = dev_get_uclass_priv(dev);
dm_testdrv_op_count[DM_TEST_OP_PRE_PROBE]++;
ut_assert(priv);
ut_assert(device_active(dev));
return 0;
}
static int dm_test_uclass_devices_get_by_name(struct unit_test_state *uts)
{
struct udevice *finddev;
struct udevice *testdev;
int ret, findret;
/*
* For each test device found in fdt like: "a-test", "b-test", etc.,
* use its name and try to get it by uclass_get_device_by_name().
* On success check if:
* - returned finddev' is active
* - current 'testdev' name is equal to the returned 'finddev' name
* - current 'testdev' pointer is equal to the returned 'finddev'
*
* We asserts that the 'testdev' is active on each loop entry, so we
* could be sure that the 'finddev' is activated too, but for sure
* we check it again.
*
* We assume that, each uclass's device name is unique, so if not, then
* this will fail on checking condition: testdev == finddev, since the
* uclass_get_device_by_name(), returns the first device by given name.
*/
for (ret = uclass_first_device(UCLASS_TEST_FDT, &testdev);
testdev;
ret = uclass_next_device(&testdev)) {
ut_assertok(ret);
ut_assert(testdev);
ut_assert(device_active(testdev));
findret = uclass_get_device_by_name(UCLASS_TEST_FDT,
testdev->name,
&finddev);
ut_assertok(findret);
ut_assert(finddev);
ut_assert(device_active(finddev));
ut_asserteq_str(testdev->name, finddev->name);
ut_asserteq_ptr(testdev, finddev);
}
return 0;
}
void video_sync_all(void)
{
struct udevice *dev;
for (uclass_find_first_device(UCLASS_VIDEO, &dev);
dev;
uclass_find_next_device(&dev)) {
if (device_active(dev))
video_sync(dev);
}
}
/* Set passive state without calling stop on the driver */
void eth_halt_state_only(void)
{
struct udevice *current;
struct eth_device_priv *priv;
current = eth_get_dev();
if (!current || !device_active(current))
return;
priv = current->uclass_priv;
priv->state = ETH_STATE_PASSIVE;
}
/* Select the video console driver to use for a video device */
static int select_vidconsole(struct unit_test_state *uts, const char *drv_name)
{
struct sandbox_sdl_plat *plat;
struct udevice *dev;
ut_assertok(uclass_find_device(UCLASS_VIDEO, 0, &dev));
ut_assert(!device_active(dev));
plat = dev_get_platdata(dev);
plat->vidconsole_drv_name = "vidconsole0";
return 0;
}
/* Set active state without calling start on the driver */
int eth_init_state_only(void)
{
struct udevice *current;
struct eth_device_priv *priv;
current = eth_get_dev();
if (!current || !device_active(current))
return -EINVAL;
priv = current->uclass_priv;
priv->state = ETH_STATE_ACTIVE;
return 0;
}
static int dm_test_uclass_devices_get(struct unit_test_state *uts)
{
struct udevice *dev;
int ret;
for (ret = uclass_first_device(UCLASS_TEST, &dev);
dev;
ret = uclass_next_device(&dev)) {
ut_assert(!ret);
ut_assert(dev);
ut_assert(device_active(dev));
}
return 0;
}
int eth_send(void *packet, int length)
{
struct udevice *current;
int ret;
current = eth_get_dev();
if (!current)
return -ENODEV;
if (!device_active(current))
return -EINVAL;
ret = eth_get_ops(current)->send(current, packet, length);
if (ret < 0) {
/* We cannot completely return the error at present */
debug("%s: send() returned error %d\n", __func__, ret);
}
return ret;
}
/* Test scrolling TrueType console */
static int dm_test_video_truetype_scroll(struct unit_test_state *uts)
{
struct sandbox_sdl_plat *plat;
struct udevice *dev, *con;
const char *test_string = "Criticism may not be agreeable, but it is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things. Some see private enterprise as a predatory target to be shot, others as a cow to be milked, but few are those who see it as a sturdy horse pulling the wagon. The \aprice OF\b\bof greatness\n\tis responsibility.\n\nBye";
const char *s;
ut_assertok(uclass_find_device(UCLASS_VIDEO, 0, &dev));
ut_assert(!device_active(dev));
plat = dev_get_platdata(dev);
plat->font_size = 100;
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
for (s = test_string; *s; s++)
vidconsole_put_char(con, *s);
ut_asserteq(33849, compress_frame_buffer(dev));
return 0;
}
/* Test TrueType backspace, within and across lines */
static int dm_test_video_truetype_bs(struct unit_test_state *uts)
{
struct sandbox_sdl_plat *plat;
struct udevice *dev, *con;
const char *test_string = "...Criticism may or may\b\b\b\b\b\bnot be agreeable, but seldom it is necessary\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bit is necessary. It fulfils the same function as pain in the human body. It calls attention to an unhealthy state of things.";
const char *s;
ut_assertok(uclass_find_device(UCLASS_VIDEO, 0, &dev));
ut_assert(!device_active(dev));
plat = dev_get_platdata(dev);
plat->font_size = 100;
ut_assertok(uclass_get_device(UCLASS_VIDEO, 0, &dev));
ut_assertok(uclass_get_device(UCLASS_VIDEO_CONSOLE, 0, &con));
for (s = test_string; *s; s++)
vidconsole_put_char(con, *s);
ut_asserteq(34871, compress_frame_buffer(dev));
return 0;
}
/* We need to renumber the GPIOs when any driver is probed/removed */
static int gpio_renumber(struct udevice *removed_dev)
{
struct gpio_dev_priv *uc_priv;
struct udevice *dev;
struct uclass *uc;
unsigned base;
int ret;
ret = uclass_get(UCLASS_GPIO, &uc);
if (ret)
return ret;
/* Ensure that we have a base for each bank */
base = 0;
uclass_foreach_dev(dev, uc) {
if (device_active(dev) && dev != removed_dev) {
uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_base = base;
base += uc_priv->gpio_count;
}
}
return 0;
}
int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
const char *drv_name, const char *dev_name,
struct udevice **busp, struct spi_slave **devp)
{
struct udevice *bus, *dev;
struct dm_spi_slave_platdata *plat;
bool created = false;
int ret;
ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
if (ret) {
printf("Invalid bus %d (err=%d)\n", busnum, ret);
return ret;
}
ret = spi_find_chip_select(bus, cs, &dev);
/*
* If there is no such device, create one automatically. This means
* that we don't need a device tree node or platform data for the
* SPI flash chip - we will bind to the correct driver.
*/
if (ret == -ENODEV && drv_name) {
debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
__func__, dev_name, busnum, cs, drv_name);
ret = device_bind_driver(bus, drv_name, dev_name, &dev);
if (ret)
return ret;
plat = dev_get_parent_platdata(dev);
plat->cs = cs;
plat->max_hz = speed;
plat->mode = mode;
created = true;
} else if (ret) {
printf("Invalid chip select %d:%d (err=%d)\n", busnum, cs,
ret);
return ret;
}
if (!device_active(dev)) {
struct spi_slave *slave;
ret = device_probe(dev);
if (ret)
goto err;
slave = dev_get_parent_priv(dev);
slave->dev = dev;
}
plat = dev_get_parent_platdata(dev);
if (!speed) {
speed = plat->max_hz;
mode = plat->mode;
}
ret = spi_set_speed_mode(bus, speed, mode);
if (ret)
goto err;
*busp = bus;
*devp = dev_get_parent_priv(dev);
debug("%s: bus=%p, slave=%p\n", __func__, bus, *devp);
return 0;
err:
debug("%s: Error path, created=%d, device '%s'\n", __func__,
created, dev->name);
if (created) {
device_remove(dev);
device_unbind(dev);
}
return ret;
}
/* Test that we can find GPIOs using phandles */
static int dm_test_gpio_phandles(struct dm_test_state *dms)
{
struct gpio_desc desc, desc_list[8], desc_list2[8];
struct udevice *dev, *gpio_a, *gpio_b;
ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev));
ut_asserteq_str("a-test", dev->name);
ut_assertok(gpio_request_by_name(dev, "test-gpios", 1, &desc, 0));
ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio_a));
ut_assertok(uclass_get_device(UCLASS_GPIO, 2, &gpio_b));
ut_asserteq_str("base-gpios", gpio_a->name);
ut_asserteq(true, !!device_active(gpio_a));
ut_asserteq_ptr(gpio_a, desc.dev);
ut_asserteq(4, desc.offset);
/* GPIOF_INPUT is the sandbox GPIO driver default */
ut_asserteq(GPIOF_INPUT, gpio_get_function(gpio_a, 4, NULL));
ut_assertok(dm_gpio_free(dev, &desc));
ut_asserteq(-ENOENT, gpio_request_by_name(dev, "test-gpios", 3, &desc,
0));
ut_asserteq_ptr(NULL, desc.dev);
ut_asserteq(desc.offset, 0);
ut_asserteq(-ENOENT, gpio_request_by_name(dev, "test-gpios", 5, &desc,
0));
/* Last GPIO is ignord as it comes after <0> */
ut_asserteq(3, gpio_request_list_by_name(dev, "test-gpios", desc_list,
ARRAY_SIZE(desc_list), 0));
ut_asserteq(-EBUSY, gpio_request_list_by_name(dev, "test-gpios",
desc_list2,
ARRAY_SIZE(desc_list2),
0));
ut_assertok(gpio_free_list(dev, desc_list, 3));
ut_asserteq(3, gpio_request_list_by_name(dev, "test-gpios", desc_list,
ARRAY_SIZE(desc_list),
GPIOD_IS_OUT |
GPIOD_IS_OUT_ACTIVE));
ut_asserteq_ptr(gpio_a, desc_list[0].dev);
ut_asserteq(1, desc_list[0].offset);
ut_asserteq_ptr(gpio_a, desc_list[1].dev);
ut_asserteq(4, desc_list[1].offset);
ut_asserteq_ptr(gpio_b, desc_list[2].dev);
ut_asserteq(5, desc_list[2].offset);
ut_asserteq(1, dm_gpio_get_value(desc_list));
ut_assertok(gpio_free_list(dev, desc_list, 3));
ut_asserteq(6, gpio_request_list_by_name(dev, "test2-gpios", desc_list,
ARRAY_SIZE(desc_list), 0));
/* This was set to output previously, so still will be */
ut_asserteq(GPIOF_OUTPUT, gpio_get_function(gpio_a, 1, NULL));
/* Active low should invert the input value */
ut_asserteq(GPIOF_INPUT, gpio_get_function(gpio_b, 6, NULL));
ut_asserteq(1, dm_gpio_get_value(&desc_list[2]));
ut_asserteq(GPIOF_INPUT, gpio_get_function(gpio_b, 7, NULL));
ut_asserteq(GPIOF_OUTPUT, gpio_get_function(gpio_b, 8, NULL));
ut_asserteq(0, dm_gpio_get_value(&desc_list[4]));
ut_asserteq(GPIOF_OUTPUT, gpio_get_function(gpio_b, 9, NULL));
ut_asserteq(1, dm_gpio_get_value(&desc_list[5]));
return 0;
}
int eth_init(void)
{
char *ethact = getenv("ethact");
char *ethrotate = getenv("ethrotate");
struct udevice *current = NULL;
struct udevice *old_current;
int ret = -ENODEV;
/*
* When 'ethrotate' variable is set to 'no' and 'ethact' variable
* is already set to an ethernet device, we should stick to 'ethact'.
*/
if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
if (ethact) {
current = eth_get_dev_by_name(ethact);
if (!current)
return -EINVAL;
}
}
if (!current) {
current = eth_get_dev();
if (!current) {
printf("No ethernet found.\n");
return -ENODEV;
}
}
old_current = current;
do {
if (current) {
debug("Trying %s\n", current->name);
if (device_active(current)) {
ret = eth_get_ops(current)->start(current);
if (ret >= 0) {
struct eth_device_priv *priv =
current->uclass_priv;
priv->state = ETH_STATE_ACTIVE;
return 0;
}
} else {
ret = eth_errno;
}
debug("FAIL\n");
} else {
debug("PROBE FAIL\n");
}
/*
* If ethrotate is enabled, this will change "current",
* otherwise we will drop out of this while loop immediately
*/
eth_try_another(0);
/* This will ensure the new "current" attempted to probe */
current = eth_get_dev();
} while (old_current != current);
return ret;
}
/*
* Typically this will just store a device pointer.
* In case it was not probed, we will attempt to do so.
* dev may be NULL to unset the active device.
*/
static void eth_set_dev(struct udevice *dev)
{
if (dev && !device_active(dev))
eth_errno = device_probe(dev);
eth_get_uclass_priv()->current = dev;
}
