int usb_emul_control(struct udevice *emul, struct usb_device *udev,
unsigned long pipe, void *buffer, int length,
struct devrequest *setup)
{
struct dm_usb_ops *ops = usb_get_emul_ops(emul);
struct usb_dev_platdata *plat;
int ret;
/* We permit getting the descriptor before we are probed */
plat = dev_get_parent_platdata(emul);
if (!ops->control)
return -ENOSYS;
debug("%s: dev=%s\n", __func__, emul->name);
if (pipe == usb_rcvctrlpipe(udev, 0)) {
switch (setup->request) {
case USB_REQ_GET_DESCRIPTOR: {
return usb_emul_get_descriptor(plat, setup->value,
buffer, length);
}
default:
ret = device_probe(emul);
if (ret)
return ret;
return ops->control(emul, udev, pipe, buffer, length,
setup);
}
} else if (pipe == usb_snddefctrl(udev)) {
switch (setup->request) {
case USB_REQ_SET_ADDRESS:
debug(" ** set address %s %d\n", emul->name,
setup->value);
plat->devnum = setup->value;
return 0;
default:
debug("requestsend =%x\n", setup->request);
break;
}
} else if (pipe == usb_sndctrlpipe(udev, 0)) {
switch (setup->request) {
case USB_REQ_SET_CONFIGURATION:
plat->configno = setup->value;
return 0;
default:
ret = device_probe(emul);
if (ret)
return ret;
return ops->control(emul, udev, pipe, buffer, length,
setup);
}
}
debug("pipe=%lx\n", pipe);
return -EIO;
}
/* Test that we can bind, probe, remove, unbind a driver */
static int dm_test_lifecycle(struct unit_test_state *uts)
{
struct dm_test_state *dms = uts->priv;
int op_count[DM_TEST_OP_COUNT];
struct udevice *dev, *test_dev;
int pingret;
int ret;
memcpy(op_count, dm_testdrv_op_count, sizeof(op_count));
ut_assertok(device_bind_by_name(dms->root, false, &driver_info_manual,
&dev));
ut_assert(dev);
ut_assert(dm_testdrv_op_count[DM_TEST_OP_BIND]
== op_count[DM_TEST_OP_BIND] + 1);
ut_assert(!dev->priv);
/* Probe the device - it should fail allocating private data */
dms->force_fail_alloc = 1;
ret = device_probe(dev);
ut_assert(ret == -ENOMEM);
ut_assert(dm_testdrv_op_count[DM_TEST_OP_PROBE]
== op_count[DM_TEST_OP_PROBE] + 1);
ut_assert(!dev->priv);
/* Try again without the alloc failure */
dms->force_fail_alloc = 0;
ut_assertok(device_probe(dev));
ut_assert(dm_testdrv_op_count[DM_TEST_OP_PROBE]
== op_count[DM_TEST_OP_PROBE] + 2);
ut_assert(dev->priv);
/* This should be device 3 in the uclass */
ut_assertok(uclass_find_device(UCLASS_TEST, 3, &test_dev));
ut_assert(dev == test_dev);
/* Try ping */
ut_assertok(test_ping(dev, 100, &pingret));
ut_assert(pingret == 102);
/* Now remove device 3 */
ut_asserteq(0, dm_testdrv_op_count[DM_TEST_OP_PRE_REMOVE]);
ut_assertok(device_remove(dev));
ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_PRE_REMOVE]);
ut_asserteq(0, dm_testdrv_op_count[DM_TEST_OP_UNBIND]);
ut_asserteq(0, dm_testdrv_op_count[DM_TEST_OP_PRE_UNBIND]);
ut_assertok(device_unbind(dev));
ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_UNBIND]);
ut_asserteq(1, dm_testdrv_op_count[DM_TEST_OP_PRE_UNBIND]);
return 0;
}
static void serial_find_console_or_panic(void)
{
#ifdef CONFIG_OF_CONTROL
int node;
/* Check for a chosen console */
node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path");
if (node < 0)
node = fdtdec_get_alias_node(gd->fdt_blob, "console");
if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &cur_dev))
return;
/*
* If the console is not marked to be bound before relocation, bind
* it anyway.
*/
if (node > 0 &&
!lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &cur_dev)) {
if (!device_probe(cur_dev))
return;
cur_dev = NULL;
}
#endif
/*
* Failing that, get the device with sequence number 0, or in extremis
* just the first serial device we can find. But we insist on having
* a console (even if it is silent).
*/
if (uclass_get_device_by_seq(UCLASS_SERIAL, 0, &cur_dev) &&
(uclass_first_device(UCLASS_SERIAL, &cur_dev) || !cur_dev))
panic("No serial driver found");
}
static void
vtpci_probe_and_attach_child(struct vtpci_softc *sc)
{
device_t dev, child;
dev = sc->vtpci_dev;
child = sc->vtpci_child_dev;
if (child == NULL)
return;
if (device_get_state(child) != DS_NOTPRESENT)
return;
if (device_probe(child) != 0)
return;
vtpci_set_status(dev, VIRTIO_CONFIG_STATUS_DRIVER);
if (device_attach(child) != 0) {
vtpci_set_status(dev, VIRTIO_CONFIG_STATUS_FAILED);
vtpci_reset(sc);
vtpci_release_child_resources(sc);
/* Reset status for future attempt. */
vtpci_set_status(dev, VIRTIO_CONFIG_STATUS_ACK);
} else {
vtpci_set_status(dev, VIRTIO_CONFIG_STATUS_DRIVER_OK);
VIRTIO_ATTACH_COMPLETED(child);
}
}
/* Test that the bus ops are called when a child is probed/removed */
static int dm_test_bus_parent_ops(struct dm_test_state *dms)
{
struct dm_test_parent_data *parent_data;
struct udevice *bus, *dev;
struct uclass *uc;
test_state = dms;
ut_assertok(uclass_get_device(UCLASS_TEST_BUS, 0, &bus));
ut_assertok(uclass_get(UCLASS_TEST_FDT, &uc));
uclass_foreach_dev(dev, uc) {
/* Ignore these if they are not on this bus */
if (dev->parent != bus)
continue;
ut_asserteq_ptr(NULL, dev_get_parentdata(dev));
ut_assertok(device_probe(dev));
parent_data = dev_get_parentdata(dev);
ut_asserteq(FLAG_CHILD_PROBED, parent_data->flag);
}
uclass_foreach_dev(dev, uc) {
/* Ignore these if they are not on this bus */
if (dev->parent != bus)
continue;
parent_data = dev_get_parentdata(dev);
ut_asserteq(FLAG_CHILD_PROBED, parent_data->flag);
ut_assertok(device_remove(dev));
ut_asserteq_ptr(NULL, dev_get_parentdata(dev));
ut_asserteq_ptr(dms->removed, dev);
}
test_state = NULL;
return 0;
}
int __weak soc_clk_dump(void)
{
#if defined(CONFIG_DM) && defined(CONFIG_CLK)
struct udevice *dev;
struct uclass *uc;
struct clk clk;
int ret;
/* Device addresses start at 1 */
ret = uclass_get(UCLASS_CLK, &uc);
if (ret)
return ret;
uclass_foreach_dev(dev, uc) {
memset(&clk, 0, sizeof(clk));
ret = device_probe(dev);
if (ret) {
printf("%-30.30s : ? Hz\n", dev->name);
continue;
}
ret = clk_request(dev, &clk);
if (ret) {
printf("%-30.30s : ? Hz\n", dev->name);
continue;
}
printf("%-30.30s : %lu Hz\n", dev->name, clk_get_rate(&clk));
clk_free(&clk);
}
/*
* Test that the bus' uclass' child_pre_probe() is called before the
* device's probe() method
*/
static int dm_test_bus_child_pre_probe_uclass(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
int child_count;
/*
* See testfdt_drv_probe() which effectively checks that the uclass
* flag is set before that method is called
*/
ut_assertok(uclass_get_device(UCLASS_TEST_BUS, 0, &bus));
for (device_find_first_child(bus, &dev), child_count = 0;
dev;
device_find_next_child(&dev)) {
struct dm_test_priv *priv = dev_get_priv(dev);
/* Check that things happened in the right order */
ut_asserteq_ptr(NULL, priv);
ut_assertok(device_probe(dev));
priv = dev_get_priv(dev);
ut_assert(priv != NULL);
ut_asserteq(1, priv->uclass_flag);
ut_asserteq(1, priv->uclass_total);
child_count++;
}
ut_asserteq(3, child_count);
return 0;
}
int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp)
{
struct udevice *dev;
debug("%s: Searching bus '%s' for address %02x: ", __func__,
bus->name, chip_addr);
for (device_find_first_child(bus, &dev); dev;
device_find_next_child(&dev)) {
struct dm_i2c_chip store;
struct dm_i2c_chip *chip = dev_get_parentdata(dev);
int ret;
if (!chip) {
chip = &store;
i2c_chip_ofdata_to_platdata(gd->fdt_blob,
dev->of_offset, chip);
}
if (chip->chip_addr == chip_addr) {
ret = device_probe(dev);
debug("found, ret=%d\n", ret);
if (ret)
return ret;
*devp = dev;
return 0;
}
}
debug("not found\n");
return i2c_bind_driver(bus, chip_addr, devp);
}
static int syscon_probe_by_ofnode(ofnode node, struct udevice **devp)
{
struct udevice *dev, *parent;
int ret;
/* found node with "syscon" compatible, not bounded to SYSCON UCLASS */
if (!ofnode_device_is_compatible(node, "syscon")) {
dev_dbg(dev, "invalid compatible for syscon device\n");
return -EINVAL;
}
/* bound to driver with same ofnode or to root if not found */
if (device_find_global_by_ofnode(node, &parent))
parent = dm_root();
/* force bound to syscon class */
ret = device_bind_driver_to_node(parent, "syscon",
ofnode_get_name(node),
node, &dev);
if (ret) {
dev_dbg(dev, "unable to bound syscon device\n");
return ret;
}
ret = device_probe(dev);
if (ret) {
dev_dbg(dev, "unable to probe syscon device\n");
return ret;
}
*devp = dev;
return 0;
}
int dm_init(void)
{
int ret;
if (gd->dm_root) {
dm_warn("Virtual root driver already exists!\n");
return -EINVAL;
}
INIT_LIST_HEAD(&DM_UCLASS_ROOT_NON_CONST);
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
fix_drivers();
fix_uclass();
#endif
ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);
if (ret)
return ret;
#if CONFIG_IS_ENABLED(OF_CONTROL)
DM_ROOT_NON_CONST->of_offset = 0;
#endif
ret = device_probe(DM_ROOT_NON_CONST);
if (ret)
return ret;
return 0;
}
/*
* Find the udevice that either has the name passed in as devname or has an
* alias named devname.
*/
struct udevice *eth_get_dev_by_name(const char *devname)
{
int seq = -1;
char *endp = NULL;
const char *startp = NULL;
struct udevice *it;
struct uclass *uc;
int len = strlen("eth");
/* Must be longer than 3 to be an alias */
if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
startp = devname + len;
seq = simple_strtoul(startp, &endp, 10);
}
uclass_get(UCLASS_ETH, &uc);
uclass_foreach_dev(it, uc) {
/*
* We need the seq to be valid, so try to probe it.
* If the probe fails, the seq will not match since it will be
* -1 instead of what we are looking for.
* We don't care about errors from probe here. Either they won't
* match an alias or it will match a literal name and we'll pick
* up the error when we try to probe again in eth_set_dev().
*/
if (device_probe(it))
continue;
/* Check for the name or the sequence number to match */
if (strcmp(it->name, devname) == 0 ||
(endp > startp && it->seq == seq))
return it;
}
return NULL;
}
/* Test that the bus can store data about each child */
static int test_bus_parent_data(struct unit_test_state *uts)
{
struct dm_test_parent_data *parent_data;
struct udevice *bus, *dev;
struct uclass *uc;
int value;
ut_assertok(uclass_get_device(UCLASS_TEST_BUS, 0, &bus));
/* Check that parent data is allocated */
ut_assertok(device_find_child_by_seq(bus, 0, true, &dev));
ut_asserteq_ptr(NULL, dev_get_parent_priv(dev));
ut_assertok(device_get_child_by_seq(bus, 0, &dev));
parent_data = dev_get_parent_priv(dev);
ut_assert(NULL != parent_data);
/* Check that it starts at 0 and goes away when device is removed */
parent_data->sum += 5;
ut_asserteq(5, parent_data->sum);
device_remove(dev);
ut_asserteq_ptr(NULL, dev_get_parent_priv(dev));
/* Check that we can do this twice */
ut_assertok(device_get_child_by_seq(bus, 0, &dev));
parent_data = dev_get_parent_priv(dev);
ut_assert(NULL != parent_data);
parent_data->sum += 5;
ut_asserteq(5, parent_data->sum);
/* Add parent data to all children */
ut_assertok(uclass_get(UCLASS_TEST_FDT, &uc));
value = 5;
uclass_foreach_dev(dev, uc) {
/* Ignore these if they are not on this bus */
if (dev->parent != bus) {
ut_asserteq_ptr(NULL, dev_get_parent_priv(dev));
continue;
}
ut_assertok(device_probe(dev));
parent_data = dev_get_parent_priv(dev);
parent_data->sum = value;
value += 5;
}
/* Check it is still there */
value = 5;
uclass_foreach_dev(dev, uc) {
/* Ignore these if they are not on this bus */
if (dev->parent != bus)
continue;
parent_data = dev_get_parent_priv(dev);
ut_asserteq(value, parent_data->sum);
value += 5;
}
return 0;
}
/**
* connman_device_register:
* @device: device structure
*
* Register device with the system
*/
int connman_device_register(struct connman_device *device)
{
__connman_storage_load_device(device);
device->offlinemode = __connman_profile_get_offlinemode();
return device_probe(device);
}
int axi_sandbox_get_emul(struct udevice *bus, ulong address,
enum axi_size_t size, struct udevice **emulp)
{
struct udevice *dev;
u32 reg[2];
uint offset;
switch (size) {
case AXI_SIZE_8:
offset = 1;
break;
case AXI_SIZE_16:
offset = 2;
break;
case AXI_SIZE_32:
offset = 4;
break;
default:
debug("%s: Unknown AXI transfer size '%d'", bus->name, size);
offset = 0;
}
/*
* Note: device_find_* don't activate the devices; they're activated
* as-needed below.
*/
for (device_find_first_child(bus, &dev);
dev;
device_find_next_child(&dev)) {
int ret;
ret = dev_read_u32_array(dev, "reg", reg, ARRAY_SIZE(reg));
if (ret) {
debug("%s: Could not read 'reg' property of %s\n",
bus->name, dev->name);
continue;
}
/*
* Does the transfer's address fall into this device's address
* space?
*/
if (address >= reg[0] && address <= reg[0] + reg[1] - offset) {
/* If yes, activate it... */
if (device_probe(dev)) {
debug("%s: Could not activate %s\n",
bus->name, dev->name);
return -ENODEV;
}
/* ...and return it */
*emulp = dev;
return 0;
}
}
return -ENODEV;
}
/*
* Typically this will just store a device pointer.
* In case it was not probed, we will attempt to do so.
* dev may be NULL to unset the active device.
*/
void eth_set_dev(struct udevice *dev)
{
if (dev && !device_active(dev)) {
eth_errno = device_probe(dev);
if (eth_errno)
dev = NULL;
}
eth_get_uclass_priv()->current = dev;
}
int mp_init_cpu(struct udevice *cpu, void *unused)
{
/*
* Multiple APs are brought up simultaneously and they may get the same
* seq num in the uclass_resolve_seq() during device_probe(). To avoid
* this, set req_seq to the reg number in the device tree in advance.
*/
cpu->req_seq = fdtdec_get_int(gd->fdt_blob, cpu->of_offset, "reg", -1);
return device_probe(cpu);
}
/**
* _rproc_probe_dev() - iteration helper to probe a rproc device
* @dev: device to probe
* @uc_pdata: uclass data allocated for the device
* @data: unused
*
* Return: 0 if all ok, else appropriate error value.
*/
static int _rproc_probe_dev(struct udevice *dev,
struct dm_rproc_uclass_pdata *uc_pdata,
const void *data)
{
int ret;
ret = device_probe(dev);
if (ret)
debug("%s: Failed to initialize - %d\n", dev->name, ret);
return ret;
}
/*
* Create a block device for a handle
*
* @handle handle
* @interface block io protocol
* @return 0 = success
*/
static int efi_bl_bind(efi_handle_t handle, void *interface)
{
struct udevice *bdev, *parent = dm_root();
int ret, devnum;
char *name;
struct efi_object *obj = efi_search_obj(handle);
struct efi_block_io *io = interface;
int disks;
struct efi_blk_priv *priv;
EFI_PRINT("%s: handle %p, interface %p\n", __func__, handle, io);
if (!obj)
return -ENOENT;
devnum = blk_find_max_devnum(IF_TYPE_EFI);
if (devnum == -ENODEV)
devnum = 0;
else if (devnum < 0)
return devnum;
name = calloc(1, 18); /* strlen("efiblk#2147483648") + 1 */
if (!name)
return -ENOMEM;
sprintf(name, "efiblk#%d", devnum);
/* Create driver model udevice for the EFI block io device */
ret = blk_create_device(parent, "efi_blk", name, IF_TYPE_EFI, devnum,
io->media->block_size,
(lbaint_t)io->media->last_block, &bdev);
if (ret)
return ret;
if (!bdev)
return -ENOENT;
/* Allocate priv */
ret = device_probe(bdev);
if (ret)
return ret;
EFI_PRINT("%s: block device '%s' created\n", __func__, bdev->name);
priv = bdev->priv;
priv->handle = handle;
priv->io = interface;
ret = blk_prepare_device(bdev);
/* Create handles for the partions of the block device */
disks = efi_bl_bind_partitions(handle, bdev);
EFI_PRINT("Found %d partitions\n", disks);
return 0;
}
int usb_emul_bulk(struct udevice *emul, struct usb_device *udev,
unsigned long pipe, void *buffer, int length)
{
struct dm_usb_ops *ops = usb_get_emul_ops(emul);
int ret;
/* We permit getting the descriptor before we are probed */
if (!ops->bulk)
return -ENOSYS;
debug("%s: dev=%s\n", __func__, emul->name);
ret = device_probe(emul);
if (ret)
return ret;
return ops->bulk(emul, udev, pipe, buffer, length);
}
int mp_init_cpu(struct udevice *cpu, void *unused)
{
struct cpu_platdata *plat = dev_get_parent_platdata(cpu);
/*
* Multiple APs are brought up simultaneously and they may get the same
* seq num in the uclass_resolve_seq() during device_probe(). To avoid
* this, set req_seq to the reg number in the device tree in advance.
*/
cpu->req_seq = fdtdec_get_int(gd->fdt_blob, dev_of_offset(cpu), "reg",
-1);
plat->ucode_version = microcode_read_rev();
plat->device_id = gd->arch.x86_device;
return device_probe(cpu);
}
static void serial_find_console_or_panic(void)
{
struct udevice *dev;
#ifdef CONFIG_OF_CONTROL
int node;
/* Check for a chosen console */
node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path");
if (node < 0)
node = fdt_path_offset(gd->fdt_blob, "console");
if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &dev)) {
gd->cur_serial_dev = dev;
return;
}
/*
* If the console is not marked to be bound before relocation, bind
* it anyway.
*/
if (node > 0 &&
!lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &dev)) {
if (!device_probe(dev)) {
gd->cur_serial_dev = dev;
return;
}
}
#endif
/*
* Try to use CONFIG_CONS_INDEX if available (it is numbered from 1!).
*
* Failing that, get the device with sequence number 0, or in extremis
* just the first serial device we can find. But we insist on having
* a console (even if it is silent).
*/
#ifdef CONFIG_CONS_INDEX
#define INDEX (CONFIG_CONS_INDEX - 1)
#else
#define INDEX 0
#endif
if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
(uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
panic("No serial driver found");
#undef INDEX
gd->cur_serial_dev = dev;
}
/**
* This test case is trying to test the following scenario:
* - All ethernet devices are not probed
* - "ethaddr" for all ethernet devices are not set
* - "ethact" is set to a valid ethernet device name
*
* With Sandbox default test configuration, all ethernet devices are
* probed after power-up, so we have to manually create such scenario:
* - Remove all ethernet devices
* - Remove all "ethaddr" environment variables
* - Set "ethact" to the first ethernet device
*
* Do a ping test to see if anything goes wrong.
*/
static int dm_test_eth_act(struct unit_test_state *uts)
{
struct udevice *dev[DM_TEST_ETH_NUM];
const char *ethname[DM_TEST_ETH_NUM] = {"eth@10002000", "eth@10003000",
"sbe5", "eth@10004000"};
const char *addrname[DM_TEST_ETH_NUM] = {"ethaddr", "eth5addr",
"eth3addr", "eth1addr"};
char ethaddr[DM_TEST_ETH_NUM][18];
int i;
memset(ethaddr, '\0', sizeof(ethaddr));
net_ping_ip = string_to_ip("1.1.2.2");
/* Prepare the test scenario */
for (i = 0; i < DM_TEST_ETH_NUM; i++) {
ut_assertok(uclass_find_device_by_name(UCLASS_ETH,
ethname[i], &dev[i]));
ut_assertok(device_remove(dev[i], DM_REMOVE_NORMAL));
/* Invalidate MAC address */
strncpy(ethaddr[i], env_get(addrname[i]), 17);
/* Must disable access protection for ethaddr before clearing */
env_set(".flags", addrname[i]);
env_set(addrname[i], NULL);
}
/* Set ethact to "eth@10002000" */
env_set("ethact", ethname[0]);
/* Segment fault might happen if something is wrong */
ut_asserteq(-ENODEV, net_loop(PING));
for (i = 0; i < DM_TEST_ETH_NUM; i++) {
/* Restore the env */
env_set(".flags", addrname[i]);
env_set(addrname[i], ethaddr[i]);
/* Probe the device again */
ut_assertok(device_probe(dev[i]));
}
env_set(".flags", NULL);
env_set("ethact", NULL);
return 0;
}
int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp)
{
struct udevice *dev;
struct uclass *uc;
int ret;
*devp = NULL;
ret = uclass_get(UCLASS_SYSCON, &uc);
if (ret)
return ret;
uclass_foreach_dev(dev, uc) {
if (dev->driver_data == driver_data) {
*devp = dev;
return device_probe(dev);
}
}
return -ENODEV;
}
static int serial_check_stdout(const void *blob, struct udevice **devp)
{
int node;
/* Check for a chosen console */
node = fdtdec_get_chosen_node(blob, "stdout-path");
if (node < 0) {
const char *str, *p, *name;
/*
* Deal with things like
* stdout-path = "serial0:115200n8";
*
* We need to look up the alias and then follow it to the
* correct node.
*/
str = fdtdec_get_chosen_prop(blob, "stdout-path");
if (str) {
p = strchr(str, ':');
name = fdt_get_alias_namelen(blob, str,
p ? p - str : strlen(str));
if (name)
node = fdt_path_offset(blob, name);
}
}
if (node < 0)
node = fdt_path_offset(blob, "console");
if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, devp))
return 0;
/*
* If the console is not marked to be bound before relocation, bind it
* anyway.
*/
if (node > 0 && !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
devp)) {
if (!device_probe(*devp))
return 0;
}
return -ENODEV;
}
int notrace dm_timer_init(void)
{
__maybe_unused const void *blob = gd->fdt_blob;
struct udevice *dev = NULL;
int node = -ENOENT;
int ret;
if (gd->timer)
return 0;
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
/* Check for a chosen timer to be used for tick */
node = fdtdec_get_chosen_node(blob, "tick-timer");
#endif
if (node < 0) {
/* No chosen timer, trying first available timer */
ret = uclass_first_device_err(UCLASS_TIMER, &dev);
if (ret)
return ret;
} else {
if (uclass_get_device_by_of_offset(UCLASS_TIMER, node, &dev)) {
/*
* If the timer is not marked to be bound before
* relocation, bind it anyway.
*/
if (node > 0 &&
!lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
&dev)) {
ret = device_probe(dev);
if (ret)
return ret;
}
}
}
if (dev) {
gd->timer = dev;
return 0;
}
return -ENODEV;
}
int scsi_scan_dev(struct udevice *dev, bool verbose)
{
struct scsi_platdata *uc_plat; /* scsi controller platdata */
int ret;
int i;
int lun;
/* probe SCSI controller driver */
ret = device_probe(dev);
if (ret)
return ret;
/* Get controller platdata */
uc_plat = dev_get_uclass_platdata(dev);
for (i = 0; i < uc_plat->max_id; i++)
for (lun = 0; lun < uc_plat->max_lun; lun++)
do_scsi_scan_one(dev, i, lun, verbose);
return 0;
}
int dm_init(void)
{
int ret;
if (gd->dm_root) {
dm_warn("Virtual root driver already exists!\n");
return -EINVAL;
}
INIT_LIST_HEAD(&DM_UCLASS_ROOT_NON_CONST);
ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);
if (ret)
return ret;
#ifdef CONFIG_OF_CONTROL
DM_ROOT_NON_CONST->of_offset = 0;
#endif
ret = device_probe(DM_ROOT_NON_CONST);
if (ret)
return ret;
return 0;
}
int blk_get_device(int if_type, int devnum, struct udevice **devp)
{
struct uclass *uc;
struct udevice *dev;
int ret;
ret = uclass_get(UCLASS_BLK, &uc);
if (ret)
return ret;
uclass_foreach_dev(dev, uc) {
struct blk_desc *desc = dev_get_uclass_platdata(dev);
debug("%s: if_type=%d, devnum=%d: %s, %d, %d\n", __func__,
if_type, devnum, dev->name, desc->if_type, desc->devnum);
if (desc->if_type == if_type && desc->devnum == devnum) {
*devp = dev;
return device_probe(dev);
}
}
return -ENODEV;
}
static int i2c_bind_driver(struct udevice *bus, uint chip_addr, uint offset_len,
struct udevice **devp)
{
struct dm_i2c_chip *chip;
char name[30], *str;
struct udevice *dev;
int ret;
snprintf(name, sizeof(name), "generic_%x", chip_addr);
str = strdup(name);
if (!str)
return -ENOMEM;
ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
if (ret)
goto err_bind;
/* Tell the device what we know about it */
chip = dev_get_parent_platdata(dev);
chip->chip_addr = chip_addr;
chip->offset_len = offset_len;
ret = device_probe(dev);
debug("%s: device_probe: ret=%d\n", __func__, ret);
if (ret)
goto err_probe;
*devp = dev;
return 0;
err_probe:
/*
* If the device failed to probe, unbind it. There is nothing there
* on the bus so we don't want to leave it lying around
*/
device_unbind(dev);
err_bind:
free(str);
return ret;
}
static int dm_test_children(struct unit_test_state *uts)
{
struct dm_test_state *dms = uts->priv;
struct udevice *top[NODE_COUNT];
struct udevice *child[NODE_COUNT];
struct udevice *grandchild[NODE_COUNT];
struct udevice *dev;
int total;
int ret;
int i;
/* We don't care about the numbering for this test */
dms->skip_post_probe = 1;
ut_assert(NODE_COUNT > 5);
/* First create 10 top-level children */
ut_assertok(create_children(uts, dms->root, NODE_COUNT, 0, top));
/* Now a few have their own children */
ut_assertok(create_children(uts, top[2], NODE_COUNT, 2, NULL));
ut_assertok(create_children(uts, top[5], NODE_COUNT, 5, child));
/* And grandchildren */
for (i = 0; i < NODE_COUNT; i++)
ut_assertok(create_children(uts, child[i], NODE_COUNT, 50 * i,
i == 2 ? grandchild : NULL));
/* Check total number of devices */
total = NODE_COUNT * (3 + NODE_COUNT);
ut_asserteq(total, dm_testdrv_op_count[DM_TEST_OP_BIND]);
/* Try probing one of the grandchildren */
ut_assertok(uclass_get_device(UCLASS_TEST,
NODE_COUNT * 3 + 2 * NODE_COUNT, &dev));
ut_asserteq_ptr(grandchild[0], dev);
/*
* This should have probed the child and top node also, for a total
* of 3 nodes.
*/
ut_asserteq(3, dm_testdrv_op_count[DM_TEST_OP_PROBE]);
/* Probe the other grandchildren */
for (i = 1; i < NODE_COUNT; i++)
ut_assertok(device_probe(grandchild[i]));
ut_asserteq(2 + NODE_COUNT, dm_testdrv_op_count[DM_TEST_OP_PROBE]);
/* Probe everything */
for (ret = uclass_first_device(UCLASS_TEST, &dev);
dev;
ret = uclass_next_device(&dev))
;
ut_assertok(ret);
ut_asserteq(total, dm_testdrv_op_count[DM_TEST_OP_PROBE]);
/* Remove a top-level child and check that the children are removed */
ut_assertok(device_remove(top[2]));
ut_asserteq(NODE_COUNT + 1, dm_testdrv_op_count[DM_TEST_OP_REMOVE]);
dm_testdrv_op_count[DM_TEST_OP_REMOVE] = 0;
/* Try one with grandchildren */
ut_assertok(uclass_get_device(UCLASS_TEST, 5, &dev));
ut_asserteq_ptr(dev, top[5]);
ut_assertok(device_remove(dev));
ut_asserteq(1 + NODE_COUNT * (1 + NODE_COUNT),
dm_testdrv_op_count[DM_TEST_OP_REMOVE]);
/* Try the same with unbind */
ut_assertok(device_unbind(top[2]));
ut_asserteq(NODE_COUNT + 1, dm_testdrv_op_count[DM_TEST_OP_UNBIND]);
dm_testdrv_op_count[DM_TEST_OP_UNBIND] = 0;
/* Try one with grandchildren */
ut_assertok(uclass_get_device(UCLASS_TEST, 5, &dev));
ut_asserteq_ptr(dev, top[6]);
ut_assertok(device_unbind(top[5]));
ut_asserteq(1 + NODE_COUNT * (1 + NODE_COUNT),
dm_testdrv_op_count[DM_TEST_OP_UNBIND]);
return 0;
}
