static int cyttsp5_loader_release(struct device *dev)
{
struct cyttsp5_core_data *cd = dev_get_drvdata(dev);
struct cyttsp5_loader_data *ld = cyttsp5_get_loader_data(dev);
int rc = 0;
#if CYTTSP5_FW_UPGRADE
cmd->unsubscribe_attention(dev, CY_ATTEN_IRQ, CY_MODULE_LOADER,
cyttsp5_loader_attention, CY_MODE_BOOTLOADER);
cmd->unsubscribe_attention(dev, CY_ATTEN_LOADER, CY_MODULE_LOADER,
cyttsp5_fw_upgrade_cb, CY_MODE_UNKNOWN);
#endif
#ifdef CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP568_MANUAL_TTCONFIG_UPGRADE
device_remove_bin_file(dev, &bin_attr_config_data);
device_remove_file(dev, &dev_attr_config_loading);
kfree(ld->config_data);
#endif
#ifdef CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP568_BINARY_FW_UPGRADE
device_remove_file(dev, &dev_attr_manual_upgrade);
#endif
#ifdef CONFIG_TOUCHSCREEN_CYPRESS_CYTTSP568_PLATFORM_FW_UPGRADE
device_remove_file(dev, &dev_attr_forced_upgrade);
#endif
cd->cyttsp5_dynamic_data[CY_MODULE_LOADER] = NULL;
kfree(ld);
return rc;
}
static int __init olpc_bat_init(void)
{
int ret = 0;
uint8_t status;
if (!olpc_platform_info.ecver)
return -ENXIO;
/*
* We've seen a number of EC protocol changes; this driver requires
* the latest EC protocol, supported by 0x44 and above.
*/
if (olpc_platform_info.ecver < 0x44) {
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
"battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
if (ret)
return ret;
/* Ignore the status. It doesn't actually matter */
bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0);
if (IS_ERR(bat_pdev))
return PTR_ERR(bat_pdev);
ret = power_supply_register(&bat_pdev->dev, &olpc_ac);
if (ret)
goto ac_failed;
olpc_bat.name = bat_pdev->name;
ret = power_supply_register(&bat_pdev->dev, &olpc_bat);
if (ret)
goto battery_failed;
ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
if (ret)
goto eeprom_failed;
ret = device_create_file(olpc_bat.dev, &olpc_bat_error);
if (ret)
goto error_failed;
goto success;
error_failed:
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
eeprom_failed:
power_supply_unregister(&olpc_bat);
battery_failed:
power_supply_unregister(&olpc_ac);
ac_failed:
platform_device_unregister(bat_pdev);
success:
return ret;
}
void usb_remove_sysfs_dev_files(struct usb_device *udev)
{
struct device *dev = &udev->dev;
remove_power_attributes(dev);
remove_persist_attributes(dev);
device_remove_bin_file(dev, &dev_bin_attr_descriptors);
}
void wlcore_sysfs_free(struct wl1271 *wl)
{
device_remove_bin_file(wl->dev, &fwlog_attr);
device_remove_file(wl->dev, &dev_attr_hw_pg_ver);
device_remove_file(wl->dev, &dev_attr_bt_coex_state);
}
static void __exit olpc_bat_exit(void)
{
device_remove_file(olpc_bat.dev, &olpc_bat_error);
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
}
void remove_sysfs_files() { int thread_id = corral_getThreadID();
corral_atomic_begin();
__hv_assume ((sysfs_lock) == (0));
sysfs_lock = thread_id;
corral_atomic_end();
device_remove_bin_file();
sysfs_lock = 0;
}
static int olpc_battery_remove(struct platform_device *pdev)
{
device_remove_file(&olpc_bat->dev, &olpc_bat_error);
device_remove_bin_file(&olpc_bat->dev, &olpc_bat_eeprom);
power_supply_unregister(olpc_bat);
power_supply_unregister(olpc_ac);
return 0;
}
static int __init olpc_bat_init(void)
{
int ret = 0;
uint8_t status;
if (!olpc_platform_info.ecver)
return -ENXIO;
if (olpc_platform_info.ecver < 0x44) {
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
"battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
if (ret)
return ret;
bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0);
if (IS_ERR(bat_pdev))
return PTR_ERR(bat_pdev);
ret = power_supply_register(&bat_pdev->dev, &olpc_ac);
if (ret)
goto ac_failed;
olpc_bat.name = bat_pdev->name;
ret = power_supply_register(&bat_pdev->dev, &olpc_bat);
if (ret)
goto battery_failed;
ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
if (ret)
goto eeprom_failed;
ret = device_create_file(olpc_bat.dev, &olpc_bat_error);
if (ret)
goto error_failed;
goto success;
error_failed:
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
eeprom_failed:
power_supply_unregister(&olpc_bat);
battery_failed:
power_supply_unregister(&olpc_ac);
ac_failed:
platform_device_unregister(bat_pdev);
success:
return ret;
}
int chp_add_cmg_attr(struct channel_path *chp)
{
int ret;
ret = device_create_bin_file(&chp->dev, &chp_measurement_chars_attr);
if (ret)
return ret;
ret = device_create_bin_file(&chp->dev, &chp_measurement_attr);
if (ret)
device_remove_bin_file(&chp->dev, &chp_measurement_chars_attr);
return ret;
}
void remove_sysfs_files() {
noReorderBegin();
want_sysfs = 5;
atomicBegin();
assume(sysfs_lock == 0);
sysfs_lock = 5;
want_sysfs = 0;
atomicEnd();
noReorderEnd();
device_remove_bin_file();
unlock(sysfs_lock);
}
void usb_remove_sysfs_dev_files(struct usb_device *udev)
{
struct device *dev = &udev->dev;
usb_remove_ep_files(&udev->ep0);
device_remove_file(dev, &dev_attr_manufacturer);
device_remove_file(dev, &dev_attr_product);
device_remove_file(dev, &dev_attr_serial);
remove_power_attributes(dev);
device_remove_bin_file(dev, &dev_bin_attr_descriptors);
sysfs_remove_group(&dev->kobj, &dev_attr_grp);
}
static void
mic_remove(struct pci_dev *pdev)
{
int32_t brdnum;
bd_info_t *bd_info;
if (mic_data.dd_numdevs - 1 < 0)
return;
mic_data.dd_numdevs--;
brdnum = mic_data.dd_numdevs;
/* Make sure boards are shutdown and not available. */
bd_info = mic_data.dd_bi[brdnum];
spin_lock_bh(&bd_info->bi_ctx.sysfs_lock);
sysfs_put(bd_info->bi_ctx.sysfs_state);
bd_info->bi_ctx.sysfs_state = NULL;
spin_unlock_bh(&bd_info->bi_ctx.sysfs_lock);
if (bd_info->bi_ctx.bi_psmi.enabled) {
device_remove_bin_file(bd_info->bi_sysfsdev, &mic_psmi_ptes_attr);
sysfs_remove_group(&bd_info->bi_sysfsdev->kobj, &psmi_attr_group);
}
sysfs_remove_group(&bd_info->bi_sysfsdev->kobj, &bd_attr_group);
free_sysfs_entries(&bd_info->bi_ctx);
device_destroy(mic_lindata.dd_class,
mic_lindata.dd_dev + 2 + bd_info->bi_ctx.bi_id);
adapter_stop_device(&bd_info->bi_ctx, 1, 0);
/*
* Need to wait for reset since accessing the card while GDDR training
* is ongoing by adapter_remove(..) below for example can be fatal.
*/
wait_for_reset(&bd_info->bi_ctx);
mic_disable_interrupts(&bd_info->bi_ctx);
if (!bd_info->bi_ctx.msie) {
free_irq(bd_info->bi_ctx.bi_pdev->irq, &bd_info->bi_ctx);
#ifdef CONFIG_PCI_MSI
} else {
free_irq(bd_info->bi_msix_entries[0].vector, &bd_info->bi_ctx);
pci_disable_msix(bd_info->bi_ctx.bi_pdev);
#endif
}
adapter_remove(&bd_info->bi_ctx);
release_mem_region(bd_info->bi_ctx.aper.pa, bd_info->bi_ctx.aper.len);
release_mem_region(bd_info->bi_ctx.mmio.pa, bd_info->bi_ctx.mmio.len);
pci_disable_device(bd_info->bi_ctx.bi_pdev);
kfree(bd_info);
}
static void __exit hdmi_module_exit(void)
{
__inf("hdmi_module_exit\n");
printk("%s %s %d\n",__FILE__,__func__,__LINE__);
device_remove_bin_file(hdmi_edid_sysfs_dev, &dev_attr_edid);
platform_driver_unregister(&hdmi_driver);
platform_device_unregister(&hdmi_device);
class_destroy(hdmi_class);
cdev_del(my_cdev);
}
void c2port_device_unregister(struct c2port_device *c2dev)
{
if (!c2dev)
return;
dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name);
device_remove_bin_file(c2dev->dev, &c2port_bin_attrs);
spin_lock_irq(&c2port_idr_lock);
idr_remove(&c2port_idr, c2dev->id);
spin_unlock_irq(&c2port_idr_lock);
device_destroy(c2port_class, c2dev->id);
kfree(c2dev);
}
void chp_remove_cmg_attr(struct channel_path *chp)
{
device_remove_bin_file(&chp->dev, &chp_measurement_chars_attr);
device_remove_bin_file(&chp->dev, &chp_measurement_attr);
}
void remove_sysfs_files() {
lock(sysfs_lock);
device_remove_bin_file();
unlock(sysfs_lock);
}
static int olpc_battery_probe(struct platform_device *pdev)
{
int ret;
uint8_t status;
/*
* We've seen a number of EC protocol changes; this driver requires
* the latest EC protocol, supported by 0x44 and above.
*/
if (olpc_platform_info.ecver < 0x44) {
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
"battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
if (ret)
return ret;
/* Ignore the status. It doesn't actually matter */
olpc_ac = power_supply_register(&pdev->dev, &olpc_ac_desc, NULL);
if (IS_ERR(olpc_ac))
return PTR_ERR(olpc_ac);
if (olpc_board_at_least(olpc_board_pre(0xd0))) { /* XO-1.5 */
olpc_bat_desc.properties = olpc_xo15_bat_props;
olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo15_bat_props);
} else { /* XO-1 */
olpc_bat_desc.properties = olpc_xo1_bat_props;
olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo1_bat_props);
}
olpc_bat = power_supply_register(&pdev->dev, &olpc_bat_desc, NULL);
if (IS_ERR(olpc_bat)) {
ret = PTR_ERR(olpc_bat);
goto battery_failed;
}
ret = device_create_bin_file(&olpc_bat->dev, &olpc_bat_eeprom);
if (ret)
goto eeprom_failed;
ret = device_create_file(&olpc_bat->dev, &olpc_bat_error);
if (ret)
goto error_failed;
if (olpc_ec_wakeup_available()) {
device_set_wakeup_capable(&olpc_ac->dev, true);
device_set_wakeup_capable(&olpc_bat->dev, true);
}
return 0;
error_failed:
device_remove_bin_file(&olpc_bat->dev, &olpc_bat_eeprom);
eeprom_failed:
power_supply_unregister(olpc_bat);
battery_failed:
power_supply_unregister(olpc_ac);
return ret;
}
