pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
{
struct udevice *dev;
if (pci_find_device_id(ids, index, &dev))
return -1;
return dm_pci_get_bdf(dev);
}
void scsi_init(void)
{
int busdevfunc = -1;
int i;
/*
* Find a device from the list, this driver will support a single
* controller.
*/
for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
/* get PCI Device ID */
#ifdef CONFIG_DM_PCI
struct udevice *dev;
int ret;
ret = dm_pci_find_device(scsi_device_list[i].vendor,
scsi_device_list[i].device, 0, &dev);
if (!ret) {
busdevfunc = dm_pci_get_bdf(dev);
break;
}
#else
busdevfunc = pci_find_device(scsi_device_list[i].vendor,
scsi_device_list[i].device,
0);
#endif
if (busdevfunc != -1)
break;
}
if (busdevfunc == -1) {
printf("Error: SCSI Controller(s) ");
for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
printf("%04X:%04X ",
scsi_device_list[i].vendor,
scsi_device_list[i].device);
}
printf("not found\n");
return;
}
#ifdef DEBUG
else {
printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
scsi_device_list[i].vendor,
scsi_device_list[i].device,
(busdevfunc >> 16) & 0xFF,
(busdevfunc >> 11) & 0x1F,
(busdevfunc >> 8) & 0x7);
}
#endif
bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci");
scsi_low_level_init(busdevfunc);
scsi_scan(true);
bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI);
}
static int create_pirq_routing_table(struct udevice *dev)
{
struct irq_router *priv = dev_get_priv(dev);
const void *blob = gd->fdt_blob;
int node;
int len, count;
const u32 *cell;
struct irq_routing_table *rt;
struct irq_info *slot, *slot_base;
int irq_entries = 0;
int i;
int ret;
node = dev->of_offset;
/* extract the bdf from fdt_pci_addr */
priv->bdf = dm_pci_get_bdf(dev->parent);
ret = fdt_stringlist_search(blob, node, "intel,pirq-config", "pci");
if (!ret) {
priv->config = PIRQ_VIA_PCI;
} else {
ret = fdt_stringlist_search(blob, node, "intel,pirq-config",
"ibase");
if (!ret)
priv->config = PIRQ_VIA_IBASE;
else
return -EINVAL;
}
ret = fdtdec_get_int(blob, node, "intel,pirq-link", -1);
if (ret == -1)
return ret;
priv->link_base = ret;
priv->irq_mask = fdtdec_get_int(blob, node,
"intel,pirq-mask", PIRQ_BITMAP);
if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) {
/* Reserve IRQ9 for SCI */
priv->irq_mask &= ~(1 << 9);
}
if (priv->config == PIRQ_VIA_IBASE) {
int ibase_off;
ibase_off = fdtdec_get_int(blob, node, "intel,ibase-offset", 0);
if (!ibase_off)
return -EINVAL;
/*
* Here we assume that the IBASE register has already been
* properly configured by U-Boot before.
*
* By 'valid' we mean:
* 1) a valid memory space carved within system memory space
* assigned to IBASE register block.
* 2) memory range decoding is enabled.
* Hence we don't do any santify test here.
*/
dm_pci_read_config32(dev->parent, ibase_off, &priv->ibase);
priv->ibase &= ~0xf;
}
priv->actl_8bit = fdtdec_get_bool(blob, node, "intel,actl-8bit");
priv->actl_addr = fdtdec_get_int(blob, node, "intel,actl-addr", 0);
cell = fdt_getprop(blob, node, "intel,pirq-routing", &len);
if (!cell || len % sizeof(struct pirq_routing))
return -EINVAL;
count = len / sizeof(struct pirq_routing);
rt = calloc(1, sizeof(struct irq_routing_table));
if (!rt)
return -ENOMEM;
/* Populate the PIRQ table fields */
rt->signature = PIRQ_SIGNATURE;
rt->version = PIRQ_VERSION;
rt->rtr_bus = PCI_BUS(priv->bdf);
rt->rtr_devfn = (PCI_DEV(priv->bdf) << 3) | PCI_FUNC(priv->bdf);
rt->rtr_vendor = PCI_VENDOR_ID_INTEL;
rt->rtr_device = PCI_DEVICE_ID_INTEL_ICH7_31;
slot_base = rt->slots;
/* Now fill in the irq_info entries in the PIRQ table */
for (i = 0; i < count;
i++, cell += sizeof(struct pirq_routing) / sizeof(u32)) {
struct pirq_routing pr;
pr.bdf = fdt_addr_to_cpu(cell[0]);
pr.pin = fdt_addr_to_cpu(cell[1]);
pr.pirq = fdt_addr_to_cpu(cell[2]);
debug("irq_info %d: b.d.f %x.%x.%x INT%c PIRQ%c\n",
i, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf),
PCI_FUNC(pr.bdf), 'A' + pr.pin - 1,
'A' + pr.pirq);
slot = check_dup_entry(slot_base, irq_entries,
PCI_BUS(pr.bdf), PCI_DEV(pr.bdf));
if (slot) {
debug("found entry for bus %d device %d, ",
PCI_BUS(pr.bdf), PCI_DEV(pr.bdf));
if (slot->irq[pr.pin - 1].link) {
debug("skipping\n");
/*
* Sanity test on the routed PIRQ pin
*
* If they don't match, show a warning to tell
* there might be something wrong with the PIRQ
* routing information in the device tree.
*/
if (slot->irq[pr.pin - 1].link !=
LINK_N2V(pr.pirq, priv->link_base))
debug("WARNING: Inconsistent PIRQ routing information\n");
continue;
}
} else {
slot = slot_base + irq_entries++;
}
debug("writing INT%c\n", 'A' + pr.pin - 1);
fill_irq_info(priv, slot, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf),
pr.pin, pr.pirq);
}
rt->size = irq_entries * sizeof(struct irq_info) + 32;
/* Fix up the table checksum */
rt->checksum = table_compute_checksum(rt, rt->size);
pirq_routing_table = rt;
return 0;
}