C++ (Cpp) do_battery_test Examples

Example #1

File: battery.c Project: 9elements/fwts

static int battery_test1(fwts_framework *fw)
{
	uint32_t count = 0;
	uint32_t i;

	fwts_log_info(fw,
	   "This test reports which (if any) batteries there are in the system. "
	   "In addition, for charging or discharging batteries, the test validates "
	   "that the reported 'current capacity' properly increments/decrements "
	   "in line with the charge/discharge state. "
	   "This test also stresses the battery state reporting codepath "
	   "in the ACPI BIOS, and any warnings given by the ACPI interpreter "
	   "will be reported.");

	if (fwts_battery_get_count(fw, &count) != FWTS_OK) {
		fwts_log_info(fw, "No battery information present: cannot test.");
		return FWTS_OK;
	}

	fwts_log_info(fw, "Found %" PRIu32 " batteries.", count);

	for (i = 0; i < count; i++)
		do_battery_test(fw, i);

	return FWTS_OK;
}

Example #2

File: oneac.c Project: sbutler/nut

int instcmd(const char *cmdname, const char *extra)
{
	int i;

	upsdebugx(2, "In instcmd with %s and extra %s.", cmdname, extra);

	if (!strcasecmp(cmdname, "test.failure.start")) {
		ser_send(upsfd,"%s%s",SIM_PWR_FAIL,COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "shutdown.return")) {

		i = atoi(dstate_getinfo("ups.delay.shutdown"));

		if ((strncmp (UpsFamily, FAMILY_OZ, FAMILY_SIZE) == 0) ||
			(strncmp (UpsFamily, FAMILY_OB, FAMILY_SIZE) == 0))
		{
			upsdebugx(3, "Shutdown using %c%d...", DELAYED_SHUTDOWN_PREFIX, i);
			ser_send(upsfd,"%c%d%s",DELAYED_SHUTDOWN_PREFIX, i, COMMAND_END);
		}
		else
		{
			upsdebugx(3, "Shutdown using %c%03d...",DELAYED_SHUTDOWN_PREFIX, i);
			ser_send(upsfd,"%c%03d%s",DELAYED_SHUTDOWN_PREFIX, i, COMMAND_END);
		}

		return STAT_INSTCMD_HANDLED;
	}
	
	if(!strcasecmp(cmdname, "shutdown.reboot")) {
		ser_send(upsfd, "%s", SHUTDOWN);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "shutdown.stop")) {
		ser_send(upsfd,"%c%s",DELAYED_SHUTDOWN_PREFIX,COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "test.battery.start.quick")) {
		do_battery_test();
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "test.battery.start.deep")) {
		ser_send(upsfd, "%s%s", TEST_BATT_DEEP, COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "test.battery.stop")) 
	{
		if ((strncmp (UpsFamily, FAMILY_EG, FAMILY_SIZE) == 0) ||
			(strncmp (UpsFamily, FAMILY_ON, FAMILY_SIZE) == 0))
		{
			ser_send(upsfd,"%s00%s",BAT_TEST_PREFIX,COMMAND_END);
		}
		else
		{
			ser_send(upsfd,"%c%s",TEST_ABORT,COMMAND_END);
		}			
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "reset.input.minmax")) {
		ser_send(upsfd,"%c%s",RESET_MIN_MAX, COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "beeper.enable")) {
		ser_send(upsfd,"%c%c%s",SETX_BUZZER_PREFIX, BUZZER_ENABLED,COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "beeper.disable")) {
		ser_send(upsfd,"%c%c%s",SETX_BUZZER_PREFIX,BUZZER_DISABLED,COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "beeper.mute")) {
		ser_send(upsfd,"%c%c%s",SETX_BUZZER_PREFIX, BUZZER_MUTED, COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	if (!strcasecmp(cmdname, "test.panel.start")) {
		ser_send(upsfd,"%s%s",TEST_INDICATORS, COMMAND_END);
		return STAT_INSTCMD_HANDLED;
	}

	upslogx(LOG_NOTICE, "instcmd: unknown command [%s]", cmdname);
	return STAT_INSTCMD_UNKNOWN;
}