C++ (Cpp) dprec_mmp_dump_ovl_layer Examples

Example #1

File: external_display.c Project: 4Fwolf/signal75-kernel-3.10.61

int ext_disp_config_input_multiple(ext_disp_input_config* input, int idx)
{
	int ret = 0;
	int i=0;
	int layer =0;
	///EXT_DISP_FUNC();
	
	disp_ddp_path_config *data_config;	

	if((is_hdmi_active() == false) || (pgc->state != EXTD_INIT && pgc->state != EXTD_RESUME) )
	{
		EXT_DISP_LOG("[Donglei]config ext disp is already sleeped, hdmi_active:%d, state:%d\n", is_hdmi_active(), pgc->state);	
		MMProfileLogEx(ddp_mmp_get_events()->Extd_ErrorInfo, MMProfileFlagPulse, Config, idx );
		return -2;
	}

    _ext_disp_path_lock();

	// all dirty should be cleared in dpmgr_path_get_last_config()
	data_config = dpmgr_path_get_last_config(pgc->dpmgr_handle);
    
	// hope we can use only 1 input struct for input config, just set layer number
	if(_should_config_ovl_input())
	{
		for(i = 0;i<HW_OVERLAY_COUNT;i++)
		{	
			if(input[i].dirty)
			{	
				ret = _convert_disp_input_to_ovl(&(data_config->ovl_config[input[i].layer]), &input[i]);
				dprec_mmp_dump_ovl_layer(&(data_config->ovl_config[input[i].layer]), input[i].layer, 2);
			}

			if (init_roi == 1)
			{
				LCM_PARAMS *lcm_param = extd_drv_get_params(pgc->plcm);
				memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
				
				if(lcm_param != NULL)
				{
					EXT_DISP_LOG("set dest w:%d, h:%d\n", lcm_param->width, lcm_param->height);
					data_config->dst_w = lcm_param->width;
					data_config->dst_h = lcm_param->height;
				}
				
				data_config->dst_dirty = 1;
				data_config->rdma_config.address = 0;
			}
			data_config->ovl_dirty = 1;	
		}
	}
	else
	{
		OVL_CONFIG_STRUCT  ovl_config;
		_convert_disp_input_to_ovl(&ovl_config, input);
		dprec_mmp_dump_ovl_layer(&ovl_config, input->layer, 2);

		ret = _convert_disp_input_to_rdma(&(data_config->rdma_config), input);
		if (data_config->rdma_config.address)
		{
			data_config->rdma_dirty = 1;
		}
	}

	if(_should_wait_path_idle())
	{
		dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/2);
	}

	memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
	ret = dpmgr_path_config(pgc->dpmgr_handle, data_config, ext_disp_cmdq_enabled()? pgc->cmdq_handle_config : NULL);

	// this is used for decouple mode, to indicate whether we need to trigger ovl
	pgc->need_trigger_overlay = 1;
	init_roi = 0;

	_ext_disp_path_unlock();
	if (data_config->ovl_dirty)
	{
		EXT_DISP_LOG("config_input_multiple idx:%d -w:%d, h:%d, pitch:%d\n", idx ,data_config->ovl_config[0].src_w, data_config->ovl_config[0].src_h, data_config->ovl_config[0].src_pitch);	
	}else{
		EXT_DISP_LOG("config_input_multiple idx:%d -w:%d, h:%d, pitch:%d, mva:%p\n", idx ,data_config->rdma_config.width, data_config->rdma_config.height, data_config->rdma_config.pitch, data_config->rdma_config.address);
	}
		
	return ret;
}

Example #2

File: extd_ddp.c Project: AudioGod/MediaTek-HelioX10-Kernel

int ext_disp_config_input_multiple(ext_disp_input_config* input, int idx)
{
	int ret = 0;
	int i=0;
	int layer =0;
	///DISPFUNC();
	
	disp_ddp_path_config *data_config;	

	if((is_hdmi_active() == false) || (pgc->state != EXTD_RESUME) )
	{
		DISPMSG("config ext disp is already sleeped\n");	
		MMProfileLogEx(ddp_mmp_get_events()->Extd_ErrorInfo, MMProfileFlagPulse, Config, idx );
		return 0;
	}

    _ext_disp_path_lock();

	// all dirty should be cleared in dpmgr_path_get_last_config()
	data_config = dpmgr_path_get_last_config(pgc->dpmgr_handle);
	data_config->dst_dirty = 0;
	data_config->ovl_dirty = 0;
	data_config->rdma_dirty = 0;
	data_config->wdma_dirty = 0;

    
	// hope we can use only 1 input struct for input config, just set layer number
	if(_should_config_ovl_input())
	{
		for(i = 0;i<HW_OVERLAY_COUNT;i++)
		{	///dprec_logger_start(DPREC_LOGGER_PRIMARY_CONFIG, input->layer|(input->layer_en<<16), input->addr);


			if(input[i].dirty)
			{
				dprec_mmp_dump_ovl_layer(&(data_config->ovl_config[input[i].layer]), input[i].layer, 2);
				ret = _convert_disp_input_to_ovl(&(data_config->ovl_config[input[i].layer]), &input[i]);
			}
/*
			else
			{
                data_config->ovl_config[input[i].layer].layer_en = input[i].layer_en;
                data_config->ovl_config[input[i].layer].layer = input[i].layer;
			}
*/
			data_config->ovl_dirty = 1;	

			
			///dprec_logger_done(DPREC_LOGGER_PRIMARY_CONFIG, input->src_x, input->src_y);

		}
	}
	else
	{
		ret = _convert_disp_input_to_rdma(&(data_config->rdma_config), input);
		data_config->rdma_dirty= 1;
	}

	if(_should_wait_path_idle())
	{
		dpmgr_wait_event_timeout(pgc->dpmgr_handle, DISP_PATH_EVENT_FRAME_DONE, HZ/2);
	}

	memcpy(&(data_config->dispif_config), &(extd_dpi_params.dispif_config), sizeof(LCM_PARAMS));
	ret = dpmgr_path_config(pgc->dpmgr_handle, data_config, ext_disp_cmdq_enabled()? pgc->cmdq_handle_config : NULL);

	// this is used for decouple mode, to indicate whether we need to trigger ovl
	pgc->need_trigger_overlay = 1;

	_ext_disp_path_unlock();
	DISPMSG("config_input_multiple idx %x -w %d, h %d\n", idx ,data_config->ovl_config[0].src_w, data_config->ovl_config[0].src_h);	
	return ret;
}