C++ (Cpp) drawOffsetBar Examples

Example #1

File: LCDST7565.cpp Project: nakoustix/ThereMIDIn

void LCDST7565::drawHome()
{
	this->clear();
	if(synth->config->enabled)
		drawMenuButton(BUT_NOTE, 1);
	else
		drawMenuButton(BUT_NOTE_NOT, 1);
	if(midi->configuration()->enabled )
		drawMenuButton(BUT_MIDI, 0);
	else
		drawMenuButton(BUT_MIDI_NOT, 0);
	drawMenuButton(BUT_MENU, 3);

	drawOffsetBar( CT_PITCH );
	drawOffsetBar( CT_VOLUME );

	this->display();

}

Example #2

File: menu_model_inputs_mixes.cpp Project: RonDePrez/opentx

void menuModelMixOne(uint8_t event)
{
  if (event == EVT_KEY_LONG(KEY_MENU)) {
    pushMenu(menuChannelsView);
    killEvents(event);
  }

  TITLE(s_currCh ? STR_INSERTMIX : STR_EDITMIX);
  MixData *md2 = mixAddress(s_currIdx) ;
  putsChn(lcdLastPos+1*FW, 0, md2->destCh+1,0);

  SUBMENU_NOTITLE(MIX_FIELD_COUNT, {0, 0, 0, 0, 0, CASE_CURVES(1) CASE_FLIGHT_MODES((MAX_FLIGHT_MODES-1) | NAVIGATION_LINE_BY_LINE) 0, 0 /*, ...*/});

#if MENU_COLUMNS > 1
  lcd_vline(MENU_COLUMN2_X-4, FH+1, LCD_H-FH-1);
  SET_SCROLLBAR_X(0);
#endif

  int8_t sub = m_posVert;
  int8_t editMode = s_editMode;

  for (int k=0; k<MENU_COLUMNS*(LCD_LINES-1); k++) {
    coord_t y;
    coord_t COLUMN_X;
    if (k >= LCD_LINES-1) {
      y = 1 + (k-LCD_LINES+2)*FH;
      COLUMN_X = MENU_COLUMN2_X;
    }
    else {
      y = 1 + (k+1)*FH;
      COLUMN_X = 0;
    }
    int8_t i = k;
    
#if MENU_COLUMNS < 2
    i = i + s_pgOfs;
#endif

    LcdFlags attr = (sub==i ? (editMode>0 ? BLINK|INVERS : INVERS) : 0);
    switch(i) {
      case MIX_FIELD_NAME:
        editSingleName(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MIXNAME, md2->name, sizeof(md2->name), event, attr);
        break;
      case MIX_FIELD_SOURCE:
        lcd_putsColumnLeft(COLUMN_X, y, NO_INDENT(STR_SOURCE));
        putsMixerSource(COLUMN_X+MIXES_2ND_COLUMN, y, md2->srcRaw, STREXPANDED|attr);
        if (attr) CHECK_INCDEC_MODELSOURCE(event, md2->srcRaw, 1, MIXSRC_LAST);
        break;
      case MIX_FIELD_WEIGHT:
        lcd_putsColumnLeft(COLUMN_X, y, STR_WEIGHT);
        gvarWeightItem(COLUMN_X+MIXES_2ND_COLUMN, y, md2, attr|LEFT, event);
        break;
      case MIX_FIELD_OFFSET:
      {
        lcd_putsColumnLeft(COLUMN_X, y, NO_INDENT(STR_OFFSET));
        u_int8int16_t offset;
        MD_OFFSET_TO_UNION(md2, offset);
        offset.word = GVAR_MENU_ITEM(COLUMN_X+MIXES_2ND_COLUMN, y, offset.word, GV_RANGELARGE_OFFSET_NEG, GV_RANGELARGE_OFFSET, attr|LEFT, 0, event);
        MD_UNION_TO_OFFSET(offset, md2);
        drawOffsetBar(COLUMN_X+MIXES_2ND_COLUMN+22, y, md2);
        break;
      }

      case MIX_FIELD_TRIM:
        lcd_putsColumnLeft(COLUMN_X, y, STR_TRIM);
        menu_lcd_onoff(COLUMN_X+MIXES_2ND_COLUMN, y, !md2->carryTrim, attr);
        if (attr) md2->carryTrim = !checkIncDecModel(event, !md2->carryTrim, 0, 1);
        break;

#if defined(CURVES)
      case MIX_FIELD_CURVE:
      {
        lcd_putsColumnLeft(COLUMN_X, y, STR_CURVE);
        editCurveRef(COLUMN_X+MIXES_2ND_COLUMN, y, md2->curve, event, attr);
        break;
      }
#endif
#if defined(FLIGHT_MODES)
      case MIX_FIELD_FLIGHT_PHASE:
        md2->flightModes = editFlightModes(COLUMN_X+MIXES_2ND_COLUMN, y, event, md2->flightModes, attr);
        break;
#endif
      case MIX_FIELD_SWITCH:
        md2->swtch = switchMenuItem(COLUMN_X+MIXES_2ND_COLUMN, y, md2->swtch, attr, event);
        break;
      case MIX_FIELD_WARNING:
        lcd_putsColumnLeft(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MIXWARNING);
        if (md2->mixWarn)
          lcd_outdezAtt(COLUMN_X+MIXES_2ND_COLUMN, y, md2->mixWarn, attr|LEFT);
        else
          lcd_putsAtt(COLUMN_X+MIXES_2ND_COLUMN, y, STR_OFF, attr);
        if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, md2->mixWarn, 3);
        break;
      case MIX_FIELD_MLTPX:
        md2->mltpx = selectMenuItem(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MULTPX, STR_VMLTPX, md2->mltpx, 0, 2, attr, event);
        break;
      case MIX_FIELD_DELAY_UP:
        md2->delayUp = EDIT_DELAY(COLUMN_X, y, event, attr, STR_DELAYUP, md2->delayUp);
        break;
      case MIX_FIELD_DELAY_DOWN:
        md2->delayDown = EDIT_DELAY(COLUMN_X, y, event, attr, STR_DELAYDOWN, md2->delayDown);
        break;
      case MIX_FIELD_SLOW_UP:
        md2->speedUp = EDIT_DELAY(COLUMN_X, y, event, attr, STR_SLOWUP, md2->speedUp);
        break;
      case MIX_FIELD_SLOW_DOWN:
        md2->speedDown = EDIT_DELAY(COLUMN_X, y, event, attr, STR_SLOWDOWN, md2->speedDown);
        break;
    }
  }
}