int main()
{
printf("Expected result: Program should print \"deadlock prevented!\" and exit.\n");
printf("... valgrind won't run clean if exit() is called without calls to _destroy(). This is fine.\n");
printf("... this program should print right away and exit. If it takes longer than a second, it likely deadlocked.\n");
drm_setmode(DEADLOCK_PREVENTION);
drm_init(&m1);
drm_init(&m2);
pthread_t t1, t2;
pthread_create(&t1, NULL, count_up, NULL);
pthread_create(&t2, NULL, count_down, NULL);
pthread_join(t1, NULL);
pthread_join(t2, NULL);
drm_destroy(&m1);
drm_destroy(&m2);
drm_cleanup();
printf("%d\n", x);
return 0;
}
int main()
{
printf("Expected result: Program should print \"Deadlock detected! Edges: 1 -> 2, 2 -> 1\", where 1 and 2 will be specific thread_ids.\n");
printf("... after that, the program should output a non-zero number (usually a number close to 100000 or -100000).\n");
printf("... as you run your program multiple times, the number should vary between positive and negative.\n");
printf(" ...remember, the thread you send the signal to should be random, so you will be switching between killing the\n");
printf(" count_up() and the count_down() threads.\n");
printf("\n");
printf("... this program should exit within a second or two and exit. If it takes longer than 5 seconds, it likely deadlocked.\n");
printf("... due to how valgrind handles signals, the tester may not work under valgrind.\n");
printf("\n");
drm_setmode(DEADLOCK_DETECTION);
drm_init(&m1);
drm_init(&m2);
pthread_t t1, t2;
pthread_create(&t1, NULL, count_up, NULL);
pthread_create(&t2, NULL, count_down, NULL);
pthread_join(t1, NULL);
pthread_join(t2, NULL);
drm_destroy(&m1);
drm_destroy(&m2);
drm_cleanup();
printf("%d\n", x);
return 0;
}
static HRESULT WINAPI
drm_create_adapter( int fd,
ID3DAdapter9 **ppAdapter )
{
struct d3dadapter9drm_context *ctx = CALLOC_STRUCT(d3dadapter9drm_context);
HRESULT hr;
int i, different_device;
const struct drm_conf_ret *throttle_ret = NULL;
const struct drm_conf_ret *dmabuf_ret = NULL;
driOptionCache defaultInitOptions;
driOptionCache userInitOptions;
int throttling_value_user = -2;
#if !GALLIUM_STATIC_TARGETS
const char *paths[] = {
getenv("D3D9_DRIVERS_PATH"),
getenv("D3D9_DRIVERS_DIR"),
PIPE_SEARCH_DIR
};
#endif
if (!ctx) { return E_OUTOFMEMORY; }
ctx->base.destroy = drm_destroy;
fd = loader_get_user_preferred_fd(fd, &different_device);
ctx->fd = fd;
ctx->base.linear_framebuffer = !!different_device;
#if GALLIUM_STATIC_TARGETS
ctx->base.hal = dd_create_screen(fd);
#else
/* use pipe-loader to dlopen appropriate drm driver */
if (!pipe_loader_drm_probe_fd(&ctx->dev, fd, FALSE)) {
ERR("Failed to probe drm fd %d.\n", fd);
FREE(ctx);
close(fd);
return D3DERR_DRIVERINTERNALERROR;
}
/* use pipe-loader to create a drm screen (hal) */
ctx->base.hal = NULL;
for (i = 0; !ctx->base.hal && i < Elements(paths); ++i) {
if (!paths[i]) { continue; }
ctx->base.hal = pipe_loader_create_screen(ctx->dev, paths[i]);
}
#endif
if (!ctx->base.hal) {
ERR("Unable to load requested driver.\n");
drm_destroy(&ctx->base);
return D3DERR_DRIVERINTERNALERROR;
}
#if GALLIUM_STATIC_TARGETS
dmabuf_ret = dd_configuration(DRM_CONF_SHARE_FD);
throttle_ret = dd_configuration(DRM_CONF_THROTTLE);
#else
dmabuf_ret = pipe_loader_configuration(ctx->dev, DRM_CONF_SHARE_FD);
throttle_ret = pipe_loader_configuration(ctx->dev, DRM_CONF_THROTTLE);
#endif // GALLIUM_STATIC_TARGETS
if (!dmabuf_ret || !dmabuf_ret->val.val_bool) {
ERR("The driver is not capable of dma-buf sharing."
"Abandon to load nine state tracker\n");
drm_destroy(&ctx->base);
return D3DERR_DRIVERINTERNALERROR;
}
if (throttle_ret && throttle_ret->val.val_int != -1) {
ctx->base.throttling = TRUE;
ctx->base.throttling_value = throttle_ret->val.val_int;
} else
ctx->base.throttling = FALSE;
driParseOptionInfo(&defaultInitOptions, __driConfigOptionsNine);
driParseConfigFiles(&userInitOptions, &defaultInitOptions, 0, "nine");
if (driCheckOption(&userInitOptions, "throttle_value", DRI_INT)) {
throttling_value_user = driQueryOptioni(&userInitOptions, "throttle_value");
if (throttling_value_user == -1)
ctx->base.throttling = FALSE;
else if (throttling_value_user >= 0) {
ctx->base.throttling = TRUE;
ctx->base.throttling_value = throttling_value_user;
}
}
if (driCheckOption(&userInitOptions, "vblank_mode", DRI_ENUM))
ctx->base.vblank_mode = driQueryOptioni(&userInitOptions, "vblank_mode");
else
ctx->base.vblank_mode = 1;
if (driCheckOption(&userInitOptions, "thread_submit", DRI_BOOL)) {
ctx->base.thread_submit = driQueryOptionb(&userInitOptions, "thread_submit");
if (ctx->base.thread_submit && (throttling_value_user == -2 || throttling_value_user == 0)) {
ctx->base.throttling_value = 0;
} else if (ctx->base.thread_submit) {
DBG("You have set a non standard throttling value in combination with thread_submit."
"We advise to use a throttling value of -2/0");
}
if (ctx->base.thread_submit && !different_device)
DBG("You have set thread_submit but do not use a different device than the server."
"You should not expect any benefit.");
}
driDestroyOptionCache(&userInitOptions);
driDestroyOptionInfo(&defaultInitOptions);
#if GALLIUM_STATIC_TARGETS
ctx->base.ref = ninesw_create_screen(ctx->base.hal);
#else
/* wrap it to create a software screen that can share resources */
if (pipe_loader_sw_probe_wrapped(&ctx->swdev, ctx->base.hal)) {
ctx->base.ref = NULL;
for (i = 0; !ctx->base.ref && i < Elements(paths); ++i) {
if (!paths[i]) { continue; }
ctx->base.ref = pipe_loader_create_screen(ctx->swdev, paths[i]);
}
}
#endif
if (!ctx->base.ref) {
ERR("Couldn't wrap drm screen to swrast screen. Software devices "
"will be unavailable.\n");
}
/* read out PCI info */
read_descriptor(&ctx->base, fd);
/* create and return new ID3DAdapter9 */
hr = NineAdapter9_new(&ctx->base, (struct NineAdapter9 **)ppAdapter);
if (FAILED(hr)) {
drm_destroy(&ctx->base);
return hr;
}
return D3D_OK;
}
static HRESULT WINAPI
drm_create_adapter( int fd,
ID3DAdapter9 **ppAdapter )
{
struct d3dadapter9drm_context *ctx = CALLOC_STRUCT(d3dadapter9drm_context);
HRESULT hr;
bool different_device;
driOptionCache defaultInitOptions;
driOptionCache userInitOptions;
int throttling_value_user = -2;
int override_vendorid = -1;
if (!ctx) { return E_OUTOFMEMORY; }
ctx->base.destroy = drm_destroy;
/* Although the fd is provided from external source, mesa/nine
* takes ownership of it. */
fd = loader_get_user_preferred_fd(fd, &different_device);
ctx->fd = fd;
ctx->base.linear_framebuffer = different_device;
if (!pipe_loader_drm_probe_fd(&ctx->dev, fd)) {
ERR("Failed to probe drm fd %d.\n", fd);
FREE(ctx);
close(fd);
return D3DERR_DRIVERINTERNALERROR;
}
ctx->base.hal = pipe_loader_create_screen(ctx->dev);
if (!ctx->base.hal) {
ERR("Unable to load requested driver.\n");
drm_destroy(&ctx->base);
return D3DERR_DRIVERINTERNALERROR;
}
if (!ctx->base.hal->get_param(ctx->base.hal, PIPE_CAP_DMABUF)) {
ERR("The driver is not capable of dma-buf sharing."
"Abandon to load nine state tracker\n");
drm_destroy(&ctx->base);
return D3DERR_DRIVERINTERNALERROR;
}
/* Previously was set to PIPE_CAP_MAX_FRAMES_IN_FLIGHT,
* but the change of value of this cap to 1 seems to cause
* regressions. */
ctx->base.throttling_value = 2;
ctx->base.throttling = ctx->base.throttling_value > 0;
driParseOptionInfo(&defaultInitOptions, __driConfigOptionsNine);
driParseConfigFiles(&userInitOptions, &defaultInitOptions, 0, "nine", NULL);
if (driCheckOption(&userInitOptions, "throttle_value", DRI_INT)) {
throttling_value_user = driQueryOptioni(&userInitOptions, "throttle_value");
if (throttling_value_user == -1)
ctx->base.throttling = FALSE;
else if (throttling_value_user >= 0) {
ctx->base.throttling = TRUE;
ctx->base.throttling_value = throttling_value_user;
}
}
if (driCheckOption(&userInitOptions, "vblank_mode", DRI_ENUM))
ctx->base.vblank_mode = driQueryOptioni(&userInitOptions, "vblank_mode");
else
ctx->base.vblank_mode = 1;
if (driCheckOption(&userInitOptions, "thread_submit", DRI_BOOL))
ctx->base.thread_submit = driQueryOptionb(&userInitOptions, "thread_submit");
else
ctx->base.thread_submit = different_device;
if (driCheckOption(&userInitOptions, "override_vendorid", DRI_INT)) {
override_vendorid = driQueryOptioni(&userInitOptions, "override_vendorid");
}
if (driCheckOption(&userInitOptions, "discard_delayed_release", DRI_BOOL))
ctx->base.discard_delayed_release = driQueryOptionb(&userInitOptions, "discard_delayed_release");
else
ctx->base.discard_delayed_release = TRUE;
if (driCheckOption(&userInitOptions, "tearfree_discard", DRI_BOOL))
ctx->base.tearfree_discard = driQueryOptionb(&userInitOptions, "tearfree_discard");
else
ctx->base.tearfree_discard = FALSE;
if (ctx->base.tearfree_discard && !ctx->base.discard_delayed_release) {
ERR("tearfree_discard requires discard_delayed_release\n");
ctx->base.tearfree_discard = FALSE;
}
if (driCheckOption(&userInitOptions, "csmt_force", DRI_INT))
ctx->base.csmt_force = driQueryOptioni(&userInitOptions, "csmt_force");
else
ctx->base.csmt_force = -1;
if (driCheckOption(&userInitOptions, "dynamic_texture_workaround", DRI_BOOL))
ctx->base.dynamic_texture_workaround = driQueryOptionb(&userInitOptions, "dynamic_texture_workaround");
else
ctx->base.dynamic_texture_workaround = FALSE;
if (driCheckOption(&userInitOptions, "shader_inline_constants", DRI_BOOL))
ctx->base.shader_inline_constants = driQueryOptionb(&userInitOptions, "shader_inline_constants");
else
ctx->base.shader_inline_constants = FALSE;
driDestroyOptionCache(&userInitOptions);
driDestroyOptionInfo(&defaultInitOptions);
/* wrap it to create a software screen that can share resources */
if (pipe_loader_sw_probe_wrapped(&ctx->swdev, ctx->base.hal))
ctx->base.ref = pipe_loader_create_screen(ctx->swdev);
if (!ctx->base.ref) {
ERR("Couldn't wrap drm screen to swrast screen. Software devices "
"will be unavailable.\n");
}
/* read out PCI info */
read_descriptor(&ctx->base, fd, override_vendorid);
/* create and return new ID3DAdapter9 */
hr = NineAdapter9_new(&ctx->base, (struct NineAdapter9 **)ppAdapter);
if (FAILED(hr)) {
drm_destroy(&ctx->base);
return hr;
}
return D3D_OK;
}
