void
gen6_gs_visitor::visit(ir_end_primitive *)
{
this->current_annotation = "gen6 end primitive";
/* Calling EndPrimitive() is optional for point output. In this case we set
* the PrimEnd flag when we process EmitVertex().
*/
if (c->gp->program.OutputType == GL_POINTS)
return;
/* Otherwise we know that the last vertex we have processed was the last
* vertex in the primitive and we need to set its PrimEnd flag, so do this
* unless we haven't emitted that vertex at all (vertex_count != 0).
*
* Notice that we have already incremented vertex_count when we processed
* the last emit_vertex, so we need to take that into account in the
* comparison below (hence the num_output_vertices + 1 in the comparison
* below).
*/
unsigned num_output_vertices = c->gp->program.VerticesOut;
emit(CMP(dst_null_d(), this->vertex_count, src_reg(num_output_vertices + 1),
BRW_CONDITIONAL_L));
vec4_instruction *inst = emit(CMP(dst_null_d(),
this->vertex_count, 0u,
BRW_CONDITIONAL_NEQ));
inst->predicate = BRW_PREDICATE_NORMAL;
emit(IF(BRW_PREDICATE_NORMAL));
{
/* vertex_output_offset is already pointing at the first entry of the
* next vertex. So subtract 1 to modify the flags for the previous
* vertex.
*/
src_reg offset(this, glsl_type::uint_type);
emit(ADD(dst_reg(offset), this->vertex_output_offset, src_reg(-1)));
src_reg dst(this->vertex_output);
dst.reladdr = ralloc(mem_ctx, src_reg);
memcpy(dst.reladdr, &offset, sizeof(src_reg));
emit(OR(dst_reg(dst), dst, URB_WRITE_PRIM_END));
emit(ADD(dst_reg(this->prim_count), this->prim_count, 1u));
/* Set the first vertex flag to indicate that the next vertex will start
* a primitive.
*/
emit(MOV(dst_reg(this->first_vertex), URB_WRITE_PRIM_START));
}
emit(BRW_OPCODE_ENDIF);
}
void
vec4_tcs_visitor::emit_thread_end()
{
vec4_instruction *inst;
current_annotation = "thread end";
if (nir->info->tcs.vertices_out % 2) {
emit(BRW_OPCODE_ENDIF);
}
if (devinfo->gen == 7) {
struct brw_tcs_prog_data *tcs_prog_data =
(struct brw_tcs_prog_data *) prog_data;
current_annotation = "release input vertices";
/* Synchronize all threads, so we know that no one is still
* using the input URB handles.
*/
if (tcs_prog_data->instances > 1) {
dst_reg header = dst_reg(this, glsl_type::uvec4_type);
emit(TCS_OPCODE_CREATE_BARRIER_HEADER, header);
emit(SHADER_OPCODE_BARRIER, dst_null_ud(), src_reg(header));
}
/* Make thread 0 (invocations <1, 0>) release pairs of ICP handles.
* We want to compare the bottom half of invocation_id with 0, but
* use that truth value for the top half as well. Unfortunately,
* we don't have stride in the vec4 world, nor UV immediates in
* align16, so we need an opcode to get invocation_id<0,4,0>.
*/
set_condmod(BRW_CONDITIONAL_Z,
emit(TCS_OPCODE_SRC0_010_IS_ZERO, dst_null_d(),
invocation_id));
emit(IF(BRW_PREDICATE_NORMAL));
for (unsigned i = 0; i < key->input_vertices; i += 2) {
/* If we have an odd number of input vertices, the last will be
* unpaired. We don't want to use an interleaved URB write in
* that case.
*/
const bool is_unpaired = i == key->input_vertices - 1;
dst_reg header(this, glsl_type::uvec4_type);
emit(TCS_OPCODE_RELEASE_INPUT, header, brw_imm_ud(i),
brw_imm_ud(is_unpaired));
}
emit(BRW_OPCODE_ENDIF);
}
if (unlikely(INTEL_DEBUG & DEBUG_SHADER_TIME))
emit_shader_time_end();
inst = emit(TCS_OPCODE_THREAD_END);
inst->base_mrf = 14;
inst->mlen = 2;
}
void
vec4_tcs_visitor::emit_prolog()
{
invocation_id = src_reg(this, glsl_type::uint_type);
emit(TCS_OPCODE_GET_INSTANCE_ID, dst_reg(invocation_id));
/* HS threads are dispatched with the dispatch mask set to 0xFF.
* If there are an odd number of output vertices, then the final
* HS instance dispatched will only have its bottom half doing real
* work, and so we need to disable the upper half:
*/
if (nir->info->tcs.vertices_out % 2) {
emit(CMP(dst_null_d(), invocation_id,
brw_imm_ud(nir->info->tcs.vertices_out), BRW_CONDITIONAL_L));
/* Matching ENDIF is in emit_thread_end() */
emit(IF(BRW_PREDICATE_NORMAL));
}
}
void
vec4_gs_visitor::visit(ir_emit_vertex *ir)
{
this->current_annotation = "emit vertex: safety check";
/* To ensure that we don't output more vertices than the shader specified
* using max_vertices, do the logic inside a conditional of the form "if
* (vertex_count < MAX)"
*/
unsigned num_output_vertices = c->gp->program.VerticesOut;
emit(CMP(dst_null_d(), this->vertex_count,
src_reg(num_output_vertices), BRW_CONDITIONAL_L));
emit(IF(BRW_PREDICATE_NORMAL));
{
/* If we're outputting 32 control data bits or less, then we can wait
* until the shader is over to output them all. Otherwise we need to
* output them as we go. Now is the time to do it, since we're about to
* output the vertex_count'th vertex, so it's guaranteed that the
* control data bits associated with the (vertex_count - 1)th vertex are
* correct.
*/
if (c->control_data_header_size_bits > 32) {
this->current_annotation = "emit vertex: emit control data bits";
/* Only emit control data bits if we've finished accumulating a batch
* of 32 bits. This is the case when:
*
* (vertex_count * bits_per_vertex) % 32 == 0
*
* (in other words, when the last 5 bits of vertex_count *
* bits_per_vertex are 0). Assuming bits_per_vertex == 2^n for some
* integer n (which is always the case, since bits_per_vertex is
* always 1 or 2), this is equivalent to requiring that the last 5-n
* bits of vertex_count are 0:
*
* vertex_count & (2^(5-n) - 1) == 0
*
* 2^(5-n) == 2^5 / 2^n == 32 / bits_per_vertex, so this is
* equivalent to:
*
* vertex_count & (32 / bits_per_vertex - 1) == 0
*/
vec4_instruction *inst =
emit(AND(dst_null_d(), this->vertex_count,
(uint32_t) (32 / c->control_data_bits_per_vertex - 1)));
inst->conditional_mod = BRW_CONDITIONAL_Z;
emit(IF(BRW_PREDICATE_NORMAL));
{
emit_control_data_bits();
/* Reset control_data_bits to 0 so we can start accumulating a new
* batch.
*
* Note: in the case where vertex_count == 0, this neutralizes the
* effect of any call to EndPrimitive() that the shader may have
* made before outputting its first vertex.
*/
inst = emit(MOV(dst_reg(this->control_data_bits), 0u));
inst->force_writemask_all = true;
}
emit(BRW_OPCODE_ENDIF);
}
this->current_annotation = "emit vertex: vertex data";
emit_vertex();
/* In stream mode we have to set control data bits for all vertices
* unless we have disabled control data bits completely (which we do
* do for GL_POINTS outputs that don't use streams).
*/
if (c->control_data_header_size_bits > 0 &&
c->prog_data.control_data_format ==
GEN7_GS_CONTROL_DATA_FORMAT_GSCTL_SID) {
this->current_annotation = "emit vertex: Stream control data bits";
set_stream_control_data_bits(ir->stream_id());
}
this->current_annotation = "emit vertex: increment vertex count";
emit(ADD(dst_reg(this->vertex_count), this->vertex_count,
src_reg(1u)));
}
emit(BRW_OPCODE_ENDIF);
this->current_annotation = NULL;
}
/**
* Write out a batch of 32 control data bits from the control_data_bits
* register to the URB.
*
* The current value of the vertex_count register determines which DWORD in
* the URB receives the control data bits. The control_data_bits register is
* assumed to contain the correct data for the vertex that was most recently
* output, and all previous vertices that share the same DWORD.
*
* This function takes care of ensuring that if no vertices have been output
* yet, no control bits are emitted.
*/
void
vec4_gs_visitor::emit_control_data_bits()
{
assert(c->control_data_bits_per_vertex != 0);
/* Since the URB_WRITE_OWORD message operates with 128-bit (vec4 sized)
* granularity, we need to use two tricks to ensure that the batch of 32
* control data bits is written to the appropriate DWORD in the URB. To
* select which vec4 we are writing to, we use the "slot {0,1} offset"
* fields of the message header. To select which DWORD in the vec4 we are
* writing to, we use the channel mask fields of the message header. To
* avoid penalizing geometry shaders that emit a small number of vertices
* with extra bookkeeping, we only do each of these tricks when
* c->prog_data.control_data_header_size_bits is large enough to make it
* necessary.
*
* Note: this means that if we're outputting just a single DWORD of control
* data bits, we'll actually replicate it four times since we won't do any
* channel masking. But that's not a problem since in this case the
* hardware only pays attention to the first DWORD.
*/
enum brw_urb_write_flags urb_write_flags = BRW_URB_WRITE_OWORD;
if (c->control_data_header_size_bits > 32)
urb_write_flags = urb_write_flags | BRW_URB_WRITE_USE_CHANNEL_MASKS;
if (c->control_data_header_size_bits > 128)
urb_write_flags = urb_write_flags | BRW_URB_WRITE_PER_SLOT_OFFSET;
/* If vertex_count is 0, then no control data bits have been accumulated
* yet, so we should do nothing.
*/
emit(CMP(dst_null_d(), this->vertex_count, 0u, BRW_CONDITIONAL_NEQ));
emit(IF(BRW_PREDICATE_NORMAL));
{
/* If we are using either channel masks or a per-slot offset, then we
* need to figure out which DWORD we are trying to write to, using the
* formula:
*
* dword_index = (vertex_count - 1) * bits_per_vertex / 32
*
* Since bits_per_vertex is a power of two, and is known at compile
* time, this can be optimized to:
*
* dword_index = (vertex_count - 1) >> (6 - log2(bits_per_vertex))
*/
src_reg dword_index(this, glsl_type::uint_type);
if (urb_write_flags) {
src_reg prev_count(this, glsl_type::uint_type);
emit(ADD(dst_reg(prev_count), this->vertex_count, 0xffffffffu));
unsigned log2_bits_per_vertex =
_mesa_fls(c->control_data_bits_per_vertex);
emit(SHR(dst_reg(dword_index), prev_count,
(uint32_t) (6 - log2_bits_per_vertex)));
}
/* Start building the URB write message. The first MRF gets a copy of
* R0.
*/
int base_mrf = 1;
dst_reg mrf_reg(MRF, base_mrf);
src_reg r0(retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD));
vec4_instruction *inst = emit(MOV(mrf_reg, r0));
inst->force_writemask_all = true;
if (urb_write_flags & BRW_URB_WRITE_PER_SLOT_OFFSET) {
/* Set the per-slot offset to dword_index / 4, to that we'll write to
* the appropriate OWORD within the control data header.
*/
src_reg per_slot_offset(this, glsl_type::uint_type);
emit(SHR(dst_reg(per_slot_offset), dword_index, 2u));
emit(GS_OPCODE_SET_WRITE_OFFSET, mrf_reg, per_slot_offset, 1u);
}
if (urb_write_flags & BRW_URB_WRITE_USE_CHANNEL_MASKS) {
/* Set the channel masks to 1 << (dword_index % 4), so that we'll
* write to the appropriate DWORD within the OWORD. We need to do
* this computation with force_writemask_all, otherwise garbage data
* from invocation 0 might clobber the mask for invocation 1 when
* GS_OPCODE_PREPARE_CHANNEL_MASKS tries to OR the two masks
* together.
*/
src_reg channel(this, glsl_type::uint_type);
inst = emit(AND(dst_reg(channel), dword_index, 3u));
inst->force_writemask_all = true;
src_reg one(this, glsl_type::uint_type);
inst = emit(MOV(dst_reg(one), 1u));
inst->force_writemask_all = true;
src_reg channel_mask(this, glsl_type::uint_type);
inst = emit(SHL(dst_reg(channel_mask), one, channel));
inst->force_writemask_all = true;
emit(GS_OPCODE_PREPARE_CHANNEL_MASKS, dst_reg(channel_mask),
channel_mask);
emit(GS_OPCODE_SET_CHANNEL_MASKS, mrf_reg, channel_mask);
}
/* Store the control data bits in the message payload and send it. */
dst_reg mrf_reg2(MRF, base_mrf + 1);
inst = emit(MOV(mrf_reg2, this->control_data_bits));
inst->force_writemask_all = true;
inst = emit(GS_OPCODE_URB_WRITE);
inst->urb_write_flags = urb_write_flags;
/* We need to increment Global Offset by 256-bits to make room for
* Broadwell's extra "Vertex Count" payload at the beginning of the
* URB entry. Since this is an OWord message, Global Offset is counted
* in 128-bit units, so we must set it to 2.
*/
if (brw->gen >= 8)
inst->offset = 2;
inst->base_mrf = base_mrf;
inst->mlen = 2;
}
emit(BRW_OPCODE_ENDIF);
}
void
gen6_gs_visitor::xfb_program(unsigned vertex, unsigned num_verts)
{
struct brw_gs_prog_data *prog_data =
(struct brw_gs_prog_data *) &c->prog_data;
unsigned binding;
unsigned num_bindings = prog_data->num_transform_feedback_bindings;
src_reg sol_temp(this, glsl_type::uvec4_type);
/* Check for buffer overflow: we need room to write the complete primitive
* (all vertices). Otherwise, avoid writing any vertices for it
*/
emit(ADD(dst_reg(sol_temp), this->sol_prim_written, 1u));
emit(MUL(dst_reg(sol_temp), sol_temp, src_reg(num_verts)));
emit(ADD(dst_reg(sol_temp), sol_temp, this->svbi));
emit(CMP(dst_null_d(), sol_temp, this->max_svbi, BRW_CONDITIONAL_LE));
emit(IF(BRW_PREDICATE_NORMAL));
{
/* Avoid overwriting MRF 1 as it is used as URB write message header */
dst_reg mrf_reg(MRF, 2);
this->current_annotation = "gen6: emit SOL vertex data";
/* For each vertex, generate code to output each varying using the
* appropriate binding table entry.
*/
for (binding = 0; binding < num_bindings; ++binding) {
unsigned char varying =
prog_data->transform_feedback_bindings[binding];
/* Set up the correct destination index for this vertex */
vec4_instruction *inst = emit(GS_OPCODE_SVB_SET_DST_INDEX,
mrf_reg,
this->destination_indices);
inst->sol_vertex = vertex % num_verts;
/* From the Sandybridge PRM, Volume 2, Part 1, Section 4.5.1:
*
* "Prior to End of Thread with a URB_WRITE, the kernel must
* ensure that all writes are complete by sending the final
* write as a committed write."
*/
bool final_write = binding == (unsigned) num_bindings - 1 &&
inst->sol_vertex == num_verts - 1;
/* Compute offset of this varying for the current vertex
* in vertex_output
*/
this->current_annotation = output_reg_annotation[varying];
src_reg data(this->vertex_output);
data.reladdr = ralloc(mem_ctx, src_reg);
int offset = get_vertex_output_offset_for_varying(vertex, varying);
emit(MOV(dst_reg(this->vertex_output_offset), offset));
memcpy(data.reladdr, &this->vertex_output_offset, sizeof(src_reg));
data.type = output_reg[varying].type;
/* PSIZ, LAYER and VIEWPORT are packed in different channels of the
* same slot, so make sure we write the appropriate channel
*/
if (varying == VARYING_SLOT_PSIZ)
data.swizzle = BRW_SWIZZLE_WWWW;
else if (varying == VARYING_SLOT_LAYER)
data.swizzle = BRW_SWIZZLE_YYYY;
else if (varying == VARYING_SLOT_VIEWPORT)
data.swizzle = BRW_SWIZZLE_ZZZZ;
else
data.swizzle = prog_data->transform_feedback_swizzles[binding];
/* Write data */
inst = emit(GS_OPCODE_SVB_WRITE, mrf_reg, data, sol_temp);
inst->sol_binding = binding;
inst->sol_final_write = final_write;
if (final_write) {
/* This is the last vertex of the primitive, then increment
* SO num primitive counter and destination indices.
*/
emit(ADD(dst_reg(this->destination_indices),
this->destination_indices,
src_reg(num_verts)));
emit(ADD(dst_reg(this->sol_prim_written),
this->sol_prim_written, 1u));
}
}
this->current_annotation = NULL;
}
emit(BRW_OPCODE_ENDIF);
}
void
gen6_gs_visitor::xfb_write()
{
unsigned num_verts;
struct brw_gs_prog_data *prog_data =
(struct brw_gs_prog_data *) &c->prog_data;
if (!prog_data->num_transform_feedback_bindings)
return;
switch (c->prog_data.output_topology) {
case _3DPRIM_POINTLIST:
num_verts = 1;
break;
case _3DPRIM_LINELIST:
case _3DPRIM_LINESTRIP:
case _3DPRIM_LINELOOP:
num_verts = 2;
break;
case _3DPRIM_TRILIST:
case _3DPRIM_TRIFAN:
case _3DPRIM_TRISTRIP:
case _3DPRIM_RECTLIST:
num_verts = 3;
break;
case _3DPRIM_QUADLIST:
case _3DPRIM_QUADSTRIP:
case _3DPRIM_POLYGON:
num_verts = 3;
break;
default:
unreachable("Unexpected primitive type in Gen6 SOL program.");
}
this->current_annotation = "gen6 thread end: svb writes init";
emit(MOV(dst_reg(this->vertex_output_offset), 0u));
emit(MOV(dst_reg(this->sol_prim_written), 0u));
/* Check that at least one primitive can be written
*
* Note: since we use the binding table to keep track of buffer offsets
* and stride, the GS doesn't need to keep track of a separate pointer
* into each buffer; it uses a single pointer which increments by 1 for
* each vertex. So we use SVBI0 for this pointer, regardless of whether
* transform feedback is in interleaved or separate attribs mode.
*/
src_reg sol_temp(this, glsl_type::uvec4_type);
emit(ADD(dst_reg(sol_temp), this->svbi, src_reg(num_verts)));
/* Compare SVBI calculated number with the maximum value, which is
* in R1.4 (previously saved in this->max_svbi) for gen6.
*/
emit(CMP(dst_null_d(), sol_temp, this->max_svbi, BRW_CONDITIONAL_LE));
emit(IF(BRW_PREDICATE_NORMAL));
{
src_reg destination_indices_uw =
retype(destination_indices, BRW_REGISTER_TYPE_UW);
vec4_instruction *inst = emit(MOV(dst_reg(destination_indices_uw),
brw_imm_v(0x00020100))); /* (0, 1, 2) */
inst->force_writemask_all = true;
emit(ADD(dst_reg(this->destination_indices),
this->destination_indices,
this->svbi));
}
emit(BRW_OPCODE_ENDIF);
/* Write transform feedback data for all processed vertices. */
for (int i = 0; i < c->gp->program.VerticesOut; i++) {
emit(MOV(dst_reg(sol_temp), i));
emit(CMP(dst_null_d(), sol_temp, this->vertex_count,
BRW_CONDITIONAL_L));
emit(IF(BRW_PREDICATE_NORMAL));
{
xfb_program(i, num_verts);
}
emit(BRW_OPCODE_ENDIF);
}
}
void
gen6_gs_visitor::emit_thread_end()
{
/* Make sure the current primitive is ended: we know it is not ended when
* first_vertex is not zero. This is only relevant for outputs other than
* points because in the point case we set PrimEnd on all vertices.
*/
if (c->gp->program.OutputType != GL_POINTS) {
emit(CMP(dst_null_d(), this->first_vertex, 0u, BRW_CONDITIONAL_Z));
emit(IF(BRW_PREDICATE_NORMAL));
{
visit((ir_end_primitive *) NULL);
}
emit(BRW_OPCODE_ENDIF);
}
/* Here we have to:
* 1) Emit an FF_SYNC messsage to obtain an initial VUE handle.
* 2) Loop over all buffered vertex data and write it to corresponding
* URB entries.
* 3) Allocate new VUE handles for all vertices other than the first.
* 4) Send a final EOT message.
*/
/* MRF 0 is reserved for the debugger, so start with message header
* in MRF 1.
*/
int base_mrf = 1;
/* In the process of generating our URB write message contents, we
* may need to unspill a register or load from an array. Those
* reads would use MRFs 14-15.
*/
int max_usable_mrf = 13;
/* Issue the FF_SYNC message and obtain the initial VUE handle. */
emit(CMP(dst_null_d(), this->vertex_count, 0u, BRW_CONDITIONAL_G));
emit(IF(BRW_PREDICATE_NORMAL));
{
this->current_annotation = "gen6 thread end: ff_sync";
vec4_instruction *inst;
if (c->prog_data.gen6_xfb_enabled) {
src_reg sol_temp(this, glsl_type::uvec4_type);
emit(GS_OPCODE_FF_SYNC_SET_PRIMITIVES,
dst_reg(this->svbi),
this->vertex_count,
this->prim_count,
sol_temp);
inst = emit(GS_OPCODE_FF_SYNC,
dst_reg(this->temp), this->prim_count, this->svbi);
} else {
inst = emit(GS_OPCODE_FF_SYNC,
dst_reg(this->temp), this->prim_count, src_reg(0u));
}
inst->base_mrf = base_mrf;
/* Loop over all buffered vertices and emit URB write messages */
this->current_annotation = "gen6 thread end: urb writes init";
src_reg vertex(this, glsl_type::uint_type);
emit(MOV(dst_reg(vertex), 0u));
emit(MOV(dst_reg(this->vertex_output_offset), 0u));
this->current_annotation = "gen6 thread end: urb writes";
emit(BRW_OPCODE_DO);
{
emit(CMP(dst_null_d(), vertex, this->vertex_count, BRW_CONDITIONAL_GE));
inst = emit(BRW_OPCODE_BREAK);
inst->predicate = BRW_PREDICATE_NORMAL;
/* First we prepare the message header */
emit_urb_write_header(base_mrf);
/* Then add vertex data to the message in interleaved fashion */
int slot = 0;
bool complete = false;
do {
int mrf = base_mrf + 1;
/* URB offset is in URB row increments, and each of our MRFs is half
* of one of those, since we're doing interleaved writes.
*/
int urb_offset = slot / 2;
for (; slot < prog_data->vue_map.num_slots; ++slot) {
int varying = prog_data->vue_map.slot_to_varying[slot];
current_annotation = output_reg_annotation[varying];
/* Compute offset of this slot for the current vertex
* in vertex_output
*/
src_reg data(this->vertex_output);
data.reladdr = ralloc(mem_ctx, src_reg);
memcpy(data.reladdr, &this->vertex_output_offset,
sizeof(src_reg));
/* Copy this slot to the appropriate message register */
dst_reg reg = dst_reg(MRF, mrf);
reg.type = output_reg[varying].type;
data.type = reg.type;
vec4_instruction *inst = emit(MOV(reg, data));
inst->force_writemask_all = true;
mrf++;
emit(ADD(dst_reg(this->vertex_output_offset),
this->vertex_output_offset, 1u));
/* If this was max_usable_mrf, we can't fit anything more into
* this URB WRITE.
*/
if (mrf > max_usable_mrf) {
slot++;
break;
}
}
complete = slot >= prog_data->vue_map.num_slots;
emit_urb_write_opcode(complete, base_mrf, mrf, urb_offset);
} while (!complete);
/* Skip over the flags data item so that vertex_output_offset points
* to the first data item of the next vertex, so that we can start
* writing the next vertex.
*/
emit(ADD(dst_reg(this->vertex_output_offset),
this->vertex_output_offset, 1u));
emit(ADD(dst_reg(vertex), vertex, 1u));
}
emit(BRW_OPCODE_WHILE);
if (c->prog_data.gen6_xfb_enabled)
xfb_write();
}
emit(BRW_OPCODE_ENDIF);
/* Finally, emit EOT message.
*
* In gen6 we need to end the thread differently depending on whether we have
* emitted at least one vertex or not. In case we did, the EOT message must
* always include the COMPLETE flag or else the GPU hangs. If we have not
* produced any output we can't use the COMPLETE flag.
*
* However, this would lead us to end the program with an ENDIF opcode,
* which we want to avoid, so what we do is that we always request a new
* VUE handle every time we do a URB WRITE, even for the last vertex we emit.
* With this we make sure that whether we have emitted at least one vertex
* or none at all, we have to finish the thread without writing to the URB,
* which works for both cases by setting the COMPLETE and UNUSED flags in
* the EOT message.
*/
this->current_annotation = "gen6 thread end: EOT";
if (c->prog_data.gen6_xfb_enabled) {
/* When emitting EOT, set SONumPrimsWritten Increment Value. */
src_reg data(this, glsl_type::uint_type);
emit(AND(dst_reg(data), this->sol_prim_written, src_reg(0xffffu)));
emit(SHL(dst_reg(data), data, src_reg(16u)));
emit(GS_OPCODE_SET_DWORD_2, dst_reg(MRF, base_mrf), data);
}
vec4_instruction *inst = emit(GS_OPCODE_THREAD_END);
inst->urb_write_flags = BRW_URB_WRITE_COMPLETE | BRW_URB_WRITE_UNUSED;
inst->base_mrf = base_mrf;
inst->mlen = 1;
}
void
gen6_gs_visitor::visit(ir_emit_vertex *)
{
this->current_annotation = "gen6 emit vertex";
/* Honor max_vertex layout indication in geometry shader by ignoring any
* vertices coming after c->gp->program.VerticesOut.
*/
unsigned num_output_vertices = c->gp->program.VerticesOut;
emit(CMP(dst_null_d(), this->vertex_count, src_reg(num_output_vertices),
BRW_CONDITIONAL_L));
emit(IF(BRW_PREDICATE_NORMAL));
{
/* Buffer all output slots for this vertex in vertex_output */
for (int slot = 0; slot < prog_data->vue_map.num_slots; ++slot) {
int varying = prog_data->vue_map.slot_to_varying[slot];
if (varying != VARYING_SLOT_PSIZ) {
dst_reg dst(this->vertex_output);
dst.reladdr = ralloc(mem_ctx, src_reg);
memcpy(dst.reladdr, &this->vertex_output_offset, sizeof(src_reg));
emit_urb_slot(dst, varying);
} else {
/* The PSIZ slot can pack multiple varyings in different channels
* and emit_urb_slot() will produce a MOV instruction for each of
* them. Since we are writing to an array, that will translate to
* possibly multiple MOV instructions with an array destination and
* each will generate a scratch write with the same offset into
* scratch space (thus, each one overwriting the previous). This is
* not what we want. What we will do instead is emit PSIZ to a
* a regular temporary register, then move that resgister into the
* array. This way we only have one instruction with an array
* destination and we only produce a single scratch write.
*/
dst_reg tmp = dst_reg(src_reg(this, glsl_type::uvec4_type));
emit_urb_slot(tmp, varying);
dst_reg dst(this->vertex_output);
dst.reladdr = ralloc(mem_ctx, src_reg);
memcpy(dst.reladdr, &this->vertex_output_offset, sizeof(src_reg));
vec4_instruction *inst = emit(MOV(dst, src_reg(tmp)));
inst->force_writemask_all = true;
}
emit(ADD(dst_reg(this->vertex_output_offset),
this->vertex_output_offset, 1u));
}
/* Now buffer flags for this vertex */
dst_reg dst(this->vertex_output);
dst.reladdr = ralloc(mem_ctx, src_reg);
memcpy(dst.reladdr, &this->vertex_output_offset, sizeof(src_reg));
if (c->gp->program.OutputType == GL_POINTS) {
/* If we are outputting points, then every vertex has PrimStart and
* PrimEnd set.
*/
emit(MOV(dst, (_3DPRIM_POINTLIST << URB_WRITE_PRIM_TYPE_SHIFT) |
URB_WRITE_PRIM_START | URB_WRITE_PRIM_END));
emit(ADD(dst_reg(this->prim_count), this->prim_count, 1u));
} else {
/* Otherwise, we can only set the PrimStart flag, which we have stored
* in the first_vertex register. We will have to wait until we execute
* EndPrimitive() or we end the thread to set the PrimEnd flag on a
* vertex.
*/
emit(OR(dst, this->first_vertex,
(c->prog_data.output_topology << URB_WRITE_PRIM_TYPE_SHIFT)));
emit(MOV(dst_reg(this->first_vertex), 0u));
}
emit(ADD(dst_reg(this->vertex_output_offset),
this->vertex_output_offset, 1u));
/* Update vertex count */
emit(ADD(dst_reg(this->vertex_count), this->vertex_count, 1u));
}
emit(BRW_OPCODE_ENDIF);
}
