Example #1
0
/*
 * dump_section - dump the current section
 */
void Dump_section( void )
/***********************/
{
    section_dbg_header  sdh;

    Wread( &sdh, sizeof( section_dbg_header ) );
    Wdputs( "Section " );
    Putdec( sdh.section_id );
    Wdputs( " (off=" );
    Puthex( Curr_sectoff, 8 );
    Wdputslc( ")\n" );
    Wdputslc( "=========================\n" );
    Dump_header( (char *)&sdh.mod_offset, sdh_msg );
    Wdputslc( "\n" );
    currSect = sdh.section_id;

    if( Debug_options & MODULE_INFO ) {
        dump_module_info( &sdh );
    }
    if( Debug_options & GLOBAL_INFO ) {
        dump_global_info( &sdh );
    }
    if( Debug_options & ADDR_INFO ) {
        dump_addr_info( &sdh );
    }
} /* dump_section */
Example #2
0
void cassidy_host_continue(struct adns_continuation *cr, err_t ugh)
{
    if(ugh) {
        DBG_log("cassidy error: %s", ugh);
        /* continuation is freed by dnskey */
        return;
    }
    struct addrinfo *ai = sort_addr_info(cr->ipanswers);
    dump_addr_info(ai);
    cr->ipanswers = ai;
}
Example #3
0
int
main(void)
{
	struct api_signature *sig = NULL;
	int load_type, load_unit, load_slice, load_partition;
	int i;
	const char * loaderdev;

	/*
	 * If we can't find the magic signature and related info, exit with a
	 * unique error code that U-Boot reports as "## Application terminated,
	 * rc = 0xnnbadab1". Hopefully 'badab1' looks enough like "bad api" to
	 * provide a clue. It's better than 0xffffffff anyway.
	 */
	if (!api_search_sig(&sig))
		return (0x01badab1);

	syscall_ptr = sig->syscall;
	if (syscall_ptr == NULL)
		return (0x02badab1);

	if (sig->version > API_SIG_VERSION)
		return (0x03badab1);

        /* Clear BSS sections */
	bzero(__sbss_start, __sbss_end - __sbss_start);
	bzero(__bss_start, _end - __bss_start);

	/*
	 * Initialise the heap as early as possible.  Once this is done,
	 * alloc() is usable. The stack is buried inside us, so this is safe.
	 */
	uboot_heap_start = round_page((uintptr_t)end);
	uboot_heap_end   = uboot_heap_start + 512 * 1024;
	setheap((void *)uboot_heap_start, (void *)uboot_heap_end);

	/*
	 * Set up console.
	 */
	cons_probe();
	printf("Compatible U-Boot API signature found @%x\n", (uint32_t)sig);

	printf("\n");
	printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
	printf("(%s, %s)\n", bootprog_maker, bootprog_date);
	printf("\n");

	dump_sig(sig);
	dump_addr_info();

	meminfo();

	/*
	 * Enumerate U-Boot devices
	 */
	if ((devs_no = ub_dev_enum()) == 0)
		panic("no U-Boot devices found");
	printf("Number of U-Boot devices: %d\n", devs_no);

	get_load_device(&load_type, &load_unit, &load_slice, &load_partition);

	/*
	 * March through the device switch probing for things.
	 */
	for (i = 0; devsw[i] != NULL; i++) {

		if (devsw[i]->dv_init == NULL)
			continue;
		if ((devsw[i]->dv_init)() != 0)
			continue;

		printf("Found U-Boot device: %s\n", devsw[i]->dv_name);

		currdev.d_dev = devsw[i];
		currdev.d_type = currdev.d_dev->dv_type;
		currdev.d_unit = 0;

		if ((load_type == -1 || (load_type & DEV_TYP_STOR)) &&
		    strcmp(devsw[i]->dv_name, "disk") == 0) {
			if (probe_disks(i, load_type, load_unit, load_slice, 
			    load_partition) == 0)
				break;
		}

		if ((load_type == -1 || (load_type & DEV_TYP_NET)) &&
		    strcmp(devsw[i]->dv_name, "net") == 0)
			break;
	}

	/*
	 * If we couldn't find a boot device, return an error to u-boot.
	 * U-boot may be running a boot script that can try something different
	 * so returning an error is better than forcing a reboot.
	 */
	if (devsw[i] == NULL) {
		printf("No boot device found!\n");
		return (0xbadef1ce);
	}

	env_setenv("currdev", EV_VOLATILE, uboot_fmtdev(&currdev),
	    uboot_setcurrdev, env_nounset);
	env_setenv("loaddev", EV_VOLATILE, uboot_fmtdev(&currdev),
	    env_noset, env_nounset);

	setenv("LINES", "24", 1);		/* optional */
	setenv("prompt", "loader>", 1);

	archsw.arch_loadaddr = uboot_loadaddr;
	archsw.arch_getdev = uboot_getdev;
	archsw.arch_copyin = uboot_copyin;
	archsw.arch_copyout = uboot_copyout;
	archsw.arch_readin = uboot_readin;
	archsw.arch_autoload = uboot_autoload;

	interact();				/* doesn't return */

	return (0);
}
Example #4
0
int
main(void)
{
	struct api_signature *sig = NULL;
	int diskdev, i, netdev, usedev;
	struct open_file f;
	const char * loaderdev;

	if (!api_search_sig(&sig))
		return (-1);

	syscall_ptr = sig->syscall;
	if (syscall_ptr == NULL)
		return (-2);

	if (sig->version > API_SIG_VERSION)
		return (-3);

        /* Clear BSS sections */
	bzero(__sbss_start, __sbss_end - __sbss_start);
	bzero(__bss_start, _end - __bss_start);

	/*
         * Set up console.
         */
	cons_probe();

	printf("Compatible API signature found @%x\n", (uint32_t)sig);

	dump_sig(sig);
	dump_addr_info();

	/*
	 * Initialise the heap as early as possible.  Once this is done,
	 * alloc() is usable. The stack is buried inside us, so this is
	 * safe.
	 */
	setheap((void *)end, (void *)(end + 512 * 1024));

	/*
	 * Enumerate U-Boot devices
	 */
	if ((devs_no = ub_dev_enum()) == 0)
		panic("no U-Boot devices found");
	printf("Number of U-Boot devices: %d\n", devs_no);

	printf("\n");
	printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
	printf("(%s, %s)\n", bootprog_maker, bootprog_date);
	meminfo();

	/*
	 * March through the device switch probing for things -- sort of.
	 *
	 * The devsw array will have one or two items in it. If
	 * LOADER_DISK_SUPPORT is defined the first item will be a disk (which
	 * may not actually work if u-boot didn't supply one). If
	 * LOADER_NET_SUPPORT is defined the next item will be a network
	 * interface.  Again it may not actually work at the u-boot level.
	 *
	 * The original logic was to always use a disk if it could be
	 * successfully opened, otherwise use the network interface.  Now that
	 * logic is amended to first check whether the u-boot environment
	 * contains a loaderdev variable which tells us which device to use.  If
	 * it does, we use it and skip the original (second) loop which "probes"
	 * for a device. We still loop over the devsw just in case it ever gets
	 * expanded to hold more than 2 devices (but then unit numbers, which
	 * don't currently exist, may come into play).  If the device named by
	 * loaderdev isn't found, fall back using to the old "probe" loop.
	 *
	 * The original probe loop still effectively behaves as it always has:
	 * the first usable disk device is choosen, and a network device is used
	 * only if no disk device is found.  The logic has been reworked so that
	 * it examines (and thus lists) every potential device along the way
	 * instead of breaking out of the loop when the first device is found.
	 */
	loaderdev = ub_env_get("loaderdev");
	usedev = -1;
	if (loaderdev != NULL) {
		for (i = 0; devsw[i] != NULL; i++) {
			if (strcmp(loaderdev, devsw[i]->dv_name) == 0) {
				if (devsw[i]->dv_init == NULL)
					continue;
				if ((devsw[i]->dv_init)() != 0)
					continue;
				usedev = i;
				goto have_device;
			}
		}
		printf("U-Boot env contains 'loaderdev=%s', "
		    "device not found.\n", loaderdev);
	}
	printf("Probing for bootable devices...\n");
	diskdev = -1;
	netdev = -1;
	for (i = 0; devsw[i] != NULL; i++) {

		if (devsw[i]->dv_init == NULL)
			continue;
		if ((devsw[i]->dv_init)() != 0)
			continue;

		printf("Bootable device: %s\n", devsw[i]->dv_name);

		if (strncmp(devsw[i]->dv_name, "disk",
		    strlen(devsw[i]->dv_name)) == 0) {
			f.f_devdata = &currdev;
			currdev.d_dev = devsw[i];
			currdev.d_type = currdev.d_dev->dv_type;
			currdev.d_unit = 0;
			currdev.d_disk.slice = 0;
			if (devsw[i]->dv_open(&f, &currdev) == 0) {
				devsw[i]->dv_close(&f);
				if (diskdev == -1)
					diskdev = i;
			}
		} else if (strncmp(devsw[i]->dv_name, "net",
		    strlen(devsw[i]->dv_name)) == 0) {
			if (netdev == -1)
				netdev = i;
		}
	}

	if (diskdev != -1)
		usedev = diskdev;
	else if (netdev != -1)
		usedev = netdev;
	else
		panic("No bootable devices found!\n");

have_device:

	currdev.d_dev = devsw[usedev];
	currdev.d_type = devsw[usedev]->dv_type;
	currdev.d_unit = 0;
	if (currdev.d_type == DEV_TYP_STOR)
		currdev.d_disk.slice = 0;

	printf("Current device: %s\n", currdev.d_dev->dv_name);

	env_setenv("currdev", EV_VOLATILE, uboot_fmtdev(&currdev),
	    uboot_setcurrdev, env_nounset);
	env_setenv("loaddev", EV_VOLATILE, uboot_fmtdev(&currdev),
	    env_noset, env_nounset);

	setenv("LINES", "24", 1);		/* optional */
	setenv("prompt", "loader>", 1);

	archsw.arch_getdev = uboot_getdev;
	archsw.arch_copyin = uboot_copyin;
	archsw.arch_copyout = uboot_copyout;
	archsw.arch_readin = uboot_readin;
	archsw.arch_autoload = uboot_autoload;

	interact();				/* doesn't return */

	return (0);
}
Example #5
0
int main(int argc, char *argv[])
{
    err_t err = NULL;
    struct addrinfo hints, *result1, *result2;
    unsigned char buffer1[1024];
    unsigned int  buffer1_len = sizeof(buffer1);
    unsigned int  serial_size;
    int i,s;

#ifdef HAVE_EFENCE
    EF_PROTECT_FREE=1;
#endif

    initproctitle(argc, argv);
    progname = argv[0];
    leak_detective = 1;

    tool_init_log();
    cur_debugging |= DBG_DNS;

    zero(&hints);
    hints.ai_family = AF_UNSPEC;    /* Allow IPv4 or IPv6 */
    hints.ai_socktype = SOCK_DGRAM; /* Datagram socket */
    hints.ai_flags = AI_PASSIVE;    /* For wildcard IP address */
    hints.ai_protocol = 0;          /* Any protocol */
    hints.ai_canonname = NULL;
    hints.ai_addr = NULL;
    hints.ai_next = NULL;

    if(argc==1) {
        printf("usage: %s [name]...\n", progname);
        exit(10);
    }

    for(i=1; i < argc; i++) {
        DBG_log("looking up: %s\n", argv[i]);
        s = getaddrinfo(argv[i], NULL, &hints, &result1);
        if(s!=0) {
            printf("lookup: %s a/aaaa lookup error: %s\n"
                             , argv[i], gai_strerror(s));
            continue;
        }
        /* sort things so they come out consistently */
        result1 = sort_addr_info(result1);
        dump_addr_info(result1);

        /* now serialize it into the buffer */
        serial_size = serialize_addr_info(result1, buffer1, buffer1_len);
        freeaddrinfo(result1);

        DBG_log("serialized size=%u\n", serial_size);
        result2 = deserialize_addr_info(buffer1, serial_size);
        dump_addr_info(result2);

        osw_freeaddrinfo(result2);
    }

    report_leaks();

    tool_close_log();
    exit(0);
}
Example #6
0
int
main(void)
{
	struct api_signature *sig = NULL;
	int i;
	struct open_file f;

	if (!api_search_sig(&sig))
		return (-1);

	syscall_ptr = sig->syscall;
	if (syscall_ptr == NULL)
		return (-2);

	if (sig->version > API_SIG_VERSION)
		return (-3);

        /* Clear BSS sections */
	bzero(__sbss_start, __sbss_end - __sbss_start);
	bzero(__bss_start, _end - __bss_start);

	/*
         * Set up console.
         */
	cons_probe();

	printf("Compatible API signature found @%x\n", (uint32_t)sig);

	dump_sig(sig);
	dump_addr_info();

	/*
	 * Initialise the heap as early as possible.  Once this is done,
	 * alloc() is usable. The stack is buried inside us, so this is
	 * safe.
	 */
	setheap((void *)end, (void *)(end + 512 * 1024));

	/*
	 * Enumerate U-Boot devices
	 */
	if ((devs_no = ub_dev_enum()) == 0)
		panic("no U-Boot devices found");
	printf("Number of U-Boot devices: %d\n", devs_no);

	printf("\n");
	printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
	printf("(%s, %s)\n", bootprog_maker, bootprog_date);
	meminfo();

	/*
	 * March through the device switch probing for things.
	 */
	for (i = 0; devsw[i] != NULL; i++) {

		if (devsw[i]->dv_init == NULL)
			continue;
		if ((devsw[i]->dv_init)() != 0)
			continue;

		printf("\nDevice: %s\n", devsw[i]->dv_name);

		currdev.d_dev = devsw[i];
		currdev.d_type = currdev.d_dev->dv_type;
		currdev.d_unit = 0;

		if (strncmp(devsw[i]->dv_name, "disk",
		    strlen(devsw[i]->dv_name)) == 0) {
			f.f_devdata = &currdev;
			currdev.d_disk.slice = 0;
			if (devsw[i]->dv_open(&f,&currdev) == 0)
				break;
		}

		if (strncmp(devsw[i]->dv_name, "net",
		    strlen(devsw[i]->dv_name)) == 0)
			break;
	}

	if (devsw[i] == NULL)
		panic("No boot device found!");

	env_setenv("currdev", EV_VOLATILE, uboot_fmtdev(&currdev),
	    uboot_setcurrdev, env_nounset);
	env_setenv("loaddev", EV_VOLATILE, uboot_fmtdev(&currdev),
	    env_noset, env_nounset);

	setenv("LINES", "24", 1);		/* optional */
	setenv("prompt", "loader>", 1);

	archsw.arch_getdev = uboot_getdev;
	archsw.arch_copyin = uboot_copyin;
	archsw.arch_copyout = uboot_copyout;
	archsw.arch_readin = uboot_readin;
	archsw.arch_autoload = uboot_autoload;

	interact();				/* doesn't return */

	return (0);
}