int main()
{
msg_t *m = (msg_t *) 0x4000;
uint64_t d64;
uint32_t d32;
uint16_t d16;
uint8_t d8;
unsigned int dt;
void *da, *dua, *dc;
for (unsigned int row = 0; row < E_ROWS; row++) {
for (unsigned int col = 0; col < E_COLS; col++) {
if (row == 0 && col == 0) continue;
unsigned int tcore = row * E_COLS + col;
da = e_get_global_address(row, col, (void *) MEM_ALINEADA);
dua = e_get_global_address(row, col, (void *) MEM_NO_ALINEADA);
dc = e_get_global_address(row, col, (void *) MEM_A_CABALLO);
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d64, da, sizeof(d64));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].t64 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d32, da, sizeof(d32));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].t32 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d16, da, sizeof(d16));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].t16 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d8, da, sizeof(d8));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].t8 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d64, dua, sizeof(d64));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].ua64 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d32, dua, sizeof(d32));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].ua32 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d16, dua, sizeof(d16));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].ua16 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d8, dua, sizeof(d8));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].ua8 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d64, dua, sizeof(d64));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].c64 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d32, dc, sizeof(d32));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].c32 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d16, dc, sizeof(d16));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].c16 = (dt - DUMMY_WAIT) / (double) VECES;
e_dma_wait(E_DMA_1);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
for (int i = 0; i < VECES; i++)
e_dma_copy(&d8, dc, sizeof(d8));
e_dma_wait(E_DMA_1);
e_wait(E_CTIMER_1, DUMMY_WAIT);
e_ctimer_stop(E_CTIMER_0);
dt = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
m->ticks[tcore].c8 = (dt - DUMMY_WAIT) / (double) VECES;
}
}
m->finalizado = E_TRUE;
return 0;
}
void main(){
e_ctimer_set(E_CTIMER_0, E_CTIMER_CLK, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
init();
// wait for the go (which means actors are connected)
while(Mailbox.pGo[me.corenum] == 0);
timerValue = e_ctimer_get(E_CTIMER_0);
Mailbox.pTimer0[me.corenum] = E_CTIMER_MAX - timerValue;
e_ctimer_stop(E_CTIMER_0);
// Timer functions 1
e_ctimer_set(E_CTIMER_1, E_CTIMER_CLK, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_1, E_CTIMER_CLK);
int j = 0;
int signed_counter = 0;
// Run until there is no input left
while(j < IN_BUFFER_SIZE)
{
//action read_signed
if(clip.count < 0){
//clip.sflag = port_read(&SIGNED);
clip.sflag = Mailbox.pSignedBuffer[signed_counter++];
clip.count = 63;
} // end of action read_signed
else { // action limit
int i = port_read(&I);
if(i > 255){
#if 0
port_write(&O, 255); j++;
#endif
#if 1
Mailbox.pOutputBuffer[j] = 255; j++;
#endif
// j++;
}
else if(clip.sflag == 0 && i < 0){
#if 0
port_write(&O, 0); j++;
#endif
#if 1
Mailbox.pOutputBuffer[j] = 0; j++;
#endif
//j++;
}
else if(i < -255){
#if 0
port_write(&O, -255); j++;
#endif
#if 1
Mailbox.pOutputBuffer[j] = -255; j++;
#endif
//j++;
}
else{
#if 0
port_write(&O, i); j++;
#endif
#if 1
Mailbox.pOutputBuffer[j] = i; j++;
#endif
//j++;
}
clip.count = clip.count - 1;
}
}
timerValue = e_ctimer_get(E_CTIMER_1);
Mailbox.pTimer1[me.corenum] = E_CTIMER_MAX - timerValue;
#if 1
*Mailbox.pOutputReady = 1;
#endif
e_ctimer_stop(E_CTIMER_1);
}
static uint64_t platform_clock(void)
{
static mach_timebase_info_data_t tb_info = {
.numer = 0,
.denom = 0,
};
uint64_t abs_time, nanosec;
abs_time = mach_absolute_time();
if (tb_info.denom == 0) {
(void) mach_timebase_info(&tb_info);
}
nanosec = abs_time;
nanosec /= tb_info.denom;
nanosec *= tb_info.numer;
return nanosec;
}
#elif defined(HAVE_E_LIB_H)
static uint64_t platform_clock(void)
{
// Assuming 600MHz clock 10^9 / (600 * 10^6)
const float factor = 1.6666666666666666666f;
static uint64_t clock = 0;
uint64_t diff, nanosec;
static bool initialized = false;
if (!initialized) {
e_ctimer_stop(E_CTIMER_0);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
initialized = true;
return 0;
}
/* Clock will drift here */
diff = E_CTIMER_MAX - e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
clock += diff;
nanosec = (uint64_t) ((float) clock * factor);
return nanosec;
}
#else
#error "No timing function"
#endif
static void platform_print_duration(uint64_t start,
uint64_t end)
{
if (end < start)
bench_printf("%" PRIu64, 0xffffffffffffffffUL);
else
bench_printf("%" PRIu64, end - start);
}
/* end of platform specific section */
struct item_data
{
uint64_t start;
uint64_t end;
};
int main(void)
{
e_coreid_t coreid;
unsigned int i;
unsigned int num;
unsigned int time_p;
unsigned int time_c;
unsigned int time_compare;
float volatile af;
float volatile bf;
float volatile cf;
float volatile df;
float ref;
unsigned int temp;
float volatile in_sin;
float volatile in_cos;
float volatile in_sqt;
float volatile in_ceil;
float volatile in_log;
float re_f0, re_f1, re_f2, re_f3, re_f4, re_f5;
af = 3.5f;
bf = 2.8f;
cf = 8.0f;
df = 3.0f;
in_sin = (float) pi;
in_sin = in_sin / 6 ;
in_cos = (float) pi;
in_cos = in_cos / 3 ;
in_sqt = 0.25f;
in_ceil = 2.5f;
in_log = 100.0f;
// Who am I? Query the CoreID from hardware.
coreid = e_get_coreid();
sprintf(outbuf, "");
// Get time waste on functions
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
time_compare = time_p - time_c ;
// Addition
// E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
ref = bf + af ;
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if (!((ref > 6.299f)&&(ref < 6.301f)))
{
sprintf(outbuf, "\n Addition is wrong!\n");
}else
{
sprintf(outbuf , "\nE_CTIMER0: The clock cycle of addition is %d.\n", temp);
}
// Subtraction
// E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
ref = af - bf;
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( !((ref > 0.699f)&&(ref < 0.701f)))
{
sprintf(outbuf+strlen(outbuf), "\n Subtraction is wrong!\n");
}else
{
sprintf(outbuf+strlen(outbuf) , "\n E_CTIMER0: The clock cycle of subtraction is %d.\n", temp);
}
// Mul
//E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
ref = af * bf;
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if (!((ref > 9.799f)&&(ref < 9.801f)))
{
sprintf(outbuf+strlen(outbuf), "\n Multiplication is wrong!\n");
}else
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of multiplication is %d.\n", temp);
}
// Div
//E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
ref = ( af / bf);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if (!((ref > 1.2499f)&&(ref < 1.2501f)))
{
sprintf(outbuf+strlen(outbuf), "\n Division is wrong!\n");
}else
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of division is %d.\n", temp);
}
// Mod
// E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
ref = fmodf(cf,df);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if (!((ref > 1.99f)&&(ref < 2.01f)))
{
sprintf(outbuf+strlen(outbuf), "\n Mod is wrong!\n");
}else
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of mod is %d.\n", temp);
}
// Sin
// E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
re_f0 = sinf(in_sin);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( (re_f0 > 0.499) && (re_f0 < 0.501) )
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of sin is %d.\n", temp);
}else
{
sprintf(outbuf+strlen(outbuf), "\n Sin is wrong!\n");
}
// Cos
// E_CTIMER0
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
re_f1 = cosf(in_cos);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( (re_f1 > 0.499) && (re_f1 < 0.501))
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of cos is %d.\n", temp);
}else
{
sprintf(outbuf+strlen(outbuf), "\n Cos is wrong!\n");
}
// Sqrt
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
re_f2 = sqrtf(in_sqt);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( (re_f2 > 0.499) && (re_f2 < 0.501) )
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of sqrt is %d.\n", temp);
}else
{
sprintf(outbuf+strlen(outbuf), "\n Sqrt is wrong!\n");
}
// Ceil
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
re_f3 = ceilf(in_ceil);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( (re_f3 > 2.99) && (re_f3 < 3.01) )
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of ceil is %d.\n", temp);
}else
{
sprintf(outbuf+strlen(outbuf), "\n Ceil is wrong!\n");
}
// Floor
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
re_f5 = floorf(in_ceil);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( (re_f5 > 1.99f) && (re_f5 < 2.01f) )
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of floor is %d.\n", temp);
}else
{
sprintf(outbuf+strlen(outbuf), "\n Floor is wrong!\n");
}
// Log10
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
time_p = e_ctimer_get(E_CTIMER_0);
re_f4 = log10f(in_log);
time_c = e_ctimer_get(E_CTIMER_0);
e_ctimer_stop(E_CTIMER_0);
temp = time_p - time_c - time_compare;
if ( (re_f4 > 1.99f) && (re_f4 < 2.01f) )
{
sprintf(outbuf+strlen(outbuf) , "\nE_CTIMER0: The clock cycle of log10 is %d.\n", temp);
}else
{
sprintf(outbuf+strlen(outbuf), "\n Log10 is wrong!\n");
}
return EXIT_SUCCESS;
}
void main()
{
// Configure the timers
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX);
// Start the timer (countdown from 0xFFFFFFFF)
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
init();
int i = 0;
int a, b;
int w0, w1;
// Wait until we get the go message from the host
while(Mailbox.pGo[me.corenum] == 0);
timerValue = e_ctimer_get(E_CTIMER_0);
Mailbox.pTimer0[me.corenum] = E_CTIMER_MAX - timerValue;
e_ctimer_stop(E_CTIMER_0);
e_ctimer_set(E_CTIMER_1, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_1, E_CTIMER_CLK);
while(i < (IN_BUFFER_SIZE * 2))
{
w0 = ww0;
w1 = ww1;
index0 = (index0 + 1) & 3;
ww0 = W0[index0];
ww1 = W1[index0];
a = port_read(&X);
b = port_read(&X);
#if 1
port_write(&Y, a * w0); i++;
port_write(&Y, a * w1); i++;
port_write(&Y, b * w0); i++;
port_write(&Y, b * w1); i++;
#endif
#if 0
Mailbox.pOutputBuffer[i] = a * w0; i++;
Mailbox.pOutputBuffer[i] = a * w1; i++;
Mailbox.pOutputBuffer[i] = b * w0; i++;
Mailbox.pOutputBuffer[i] = b * w1; i++;
#endif
}
#if 0
*Mailbox.pOutputReady = 8;
#endif
// Get timer value, find the elapsed time and stop
timerValue = e_ctimer_get(E_CTIMER_1);
Mailbox.pTimer1[me.corenum] = E_CTIMER_MAX - timerValue;
e_ctimer_stop(E_CTIMER_1);
}
static uint32_t get_clock(void) {
return ((uint32_t) (E_CTIMER_MAX-e_ctimer_get(E_CTIMER_0)));
}
int main(void)
{
unsigned time_c, time_p;
unsigned time;
unsigned tran,k,i,j,q,h,m,n;
unsigned *box;
unsigned *n_row, *n_col, *p;
unsigned *neighbour_n;
unsigned *neighbour_s;
unsigned *neighbour_w;
unsigned *neighbour_e;
unsigned *master;
// Define the mailbox
master = (unsigned *)0x2000;
box = (unsigned *) 0x5000;
n_row = (unsigned *)0x6000;
n_col = (unsigned *)0x6004;
tran = 2048;
p =(unsigned *) 0x2000;
// Get the neighbour global address
e_neighbor_id(E_NEXT_CORE, E_ROW_WRAP, n_row, n_col);
neighbour_e = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
e_neighbor_id(E_PREV_CORE, E_ROW_WRAP, n_row, n_col);
neighbour_w = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
e_neighbor_id(E_NEXT_CORE, E_COL_WRAP, n_row, n_col);
neighbour_s = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
e_neighbor_id(E_PREV_CORE, E_COL_WRAP, n_row, n_col);
neighbour_n = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
// Test the writing bandwidth
// Initialize master and slave
for(i=0; i<tran; i++)
{
master[i] = 0xdeadbeef;
neighbour_e[i] = 0x00000000;
neighbour_w[i] = 0x00000000;
neighbour_s[i] = 0x00000000;
neighbour_n[i] = 0x00000000;
}
// Set the ctimer
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
// Start the ctimer and select the time type
time_p = e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
// Write to all neighbour cores
e_dma_copy(neighbour_e, master, 0x2000);
e_dma_copy(neighbour_w, master, 0x2000);
e_dma_copy(neighbour_s, master, 0x2000);
e_dma_copy(neighbour_n, master, 0x2000);
// Get the time now
time_c = e_ctimer_get(E_CTIMER_0);
time = time_p - time_c;
// Output the result
box[0] = time;
// Test the reading bandwidth
// Initialize master and slave
for(i=0; i<tran; i++)
{
master[i] = 0x00000000;
neighbour_e[i] = 0xdeadbee1;
neighbour_w[i] = 0xdeadbee2;
neighbour_s[i] = 0xdeadbee3;
neighbour_n[i] = 0xdeadbee4;
}
// Set the ctimer
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
// Start the ctimer and select the time type
time_p = e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
// Read from all neighbour cores
e_dma_copy(master, neighbour_e, 0x2000);
e_dma_copy(master, neighbour_w, 0x2000);
e_dma_copy(master, neighbour_s, 0x2000);
e_dma_copy(master, neighbour_n, 0x2000);
// Get the time now
time_c = e_ctimer_get(E_CTIMER_0);
time = time_p - time_c;
// Output the result
box[1] = time;
return 0;
}
int main(void)
{
unsigned mesh_reg;
unsigned mesh_reg_modify;
unsigned time_c, time_p;
unsigned time;
unsigned time_c1, time_p1;
unsigned time1;
unsigned i,j,q,m,n,k;
unsigned *commander;
unsigned *counter;
unsigned *mailbox,*mode;
unsigned *n_row, *n_col;
unsigned *neighbour0, *neighbour1, *neighbour2, *neighbour3, *p;
commander = (unsigned *)0x5100;
counter = (unsigned *)0x5300;
mailbox = (unsigned *)0x6000;
mode = (unsigned *)0x5400;
n_row = (unsigned *)0x5008;
n_col = (unsigned *)0x500c;
p = (unsigned *)0x5100;
// Broadcast to neighbours
e_neighbor_id(E_PREV_CORE, E_ROW_WRAP, n_row, n_col);
neighbour0 = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
e_neighbor_id(E_NEXT_CORE, E_ROW_WRAP, n_row, n_col);
neighbour1 = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
e_neighbor_id(E_PREV_CORE, E_COL_WRAP, n_row, n_col);
neighbour2 = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
e_neighbor_id(E_NEXT_CORE, E_COL_WRAP, n_row, n_col);
neighbour3 = (unsigned *) e_get_global_address(*n_row, *n_col, p) ;
// Get core information
k = e_group_config.core_row * e_group_config.group_cols + e_group_config.core_col;
while(1)
{
// Clear the counter of finishing transfering
for(m=0; m<(e_group_config.group_rows*e_group_config.group_cols); m++)
{
counter[m] = 0;
}
// Initialize the commander and counter
counter[k] = 1;
//Clear the mode box
mode[0] = 0xdeadbeef;
// Clear the start commander
commander[0] = 0x00000000;
// Wait for the mesh event
while(mode[0] == 0xdeadbeef)
{};
q = mode[0];
mesh_reg = e_reg_read(E_REG_MESH_CONFIG);
mesh_reg_modify = mesh_reg & 0xffffff0f;
mesh_reg_modify = mesh_reg_modify |mesh_type[1][q];
e_reg_write(E_REG_MESH_CONFIG, mesh_reg_modify);
// Set the ctimer
e_ctimer_set(E_CTIMER_0, E_CTIMER_MAX) ;
// Waiting for the signal to start transfering
while(commander[0] != 0xdeadbeef)
{};
// Start the ctimer and select the time type
time_p = e_ctimer_start(E_CTIMER_0, E_CTIMER_MESH_0);
// Broadcast to all the other neighbours
neighbour0[0] = 0xdeadbeef;
neighbour1[0] = 0xdeadbeef;
neighbour2[0] = 0xdeadbeef;
neighbour3[0] = 0xdeadbeef;
while((counter[0]&counter[1]&counter[2]&counter[3]&counter[4]&counter[5]&counter[6]
&counter[7]&counter[8]&counter[9]&counter[10]&counter[11]&counter[12]&counter[13]
&counter[14]&counter[15]) == 0) {};
time_c = e_ctimer_get(E_CTIMER_0);
time = time_p - time_c;
mailbox[(*mode)] = time;
// Load the original value to E_REG_MESH_CONFIG system register
e_reg_write(E_REG_MESH_CONFIG, mesh_reg);
if(mode[0] == 12)
{
break;
}
}
return 0;
}
void main(){
// Configure the timers
e_ctimer_set(E_CTIMER_0, E_CTIMER_CLK, E_CTIMER_MAX);
// Start the timer (countdown from 0xFFFFFFFF)
e_ctimer_start(E_CTIMER_0, E_CTIMER_CLK);
init();
int i = 0;
// wait for the go (which means actors are connected)
while(Mailbox.pGo[me.corenum] == 0);
timerValue = e_ctimer_get(E_CTIMER_0);
Mailbox.pTimer0[me.corenum] = E_CTIMER_MAX - timerValue;
e_ctimer_stop(E_CTIMER_0);
e_ctimer_set(E_CTIMER_1, E_CTIMER_CLK, E_CTIMER_MAX);
e_ctimer_start(E_CTIMER_1, E_CTIMER_CLK);
while(i < IN_BUFFER_SIZE)
{
int a, b, c, d, x2, x3, x4, x5, x6h, x6l, x7h, x7l;
// action a0
a = port_read(&X);
b = port_read(&X);
c = port_read(&X);
d = port_read(&X);
x4 = c;
x5 = d;
#if 1
port_write(&Y, a); i++;
port_write(&Y, b); i++;
// end of action a0
#endif
#if 0
//DEBUG
Mailbox.pOutputBuffer[i] = a; i++;
Mailbox.pOutputBuffer[i] = b; i++;
#endif
// action a1
x2 = port_read(&X);
a = port_read(&X);
x3 = port_read(&X);
b = port_read(&X);
int ah = a >> 8;
int bh = b >> 8;
int al = a & 255;
int bl = b & 255;
x6h = 181 * (ah + bh);
x7h = 181 * (ah - bh);
x6l = 181 * (al + bl) + 128;
x7l = 181 * (al - bl) + 128;
#if 1
port_write(&Y, x2); i++;
port_write(&Y, x3); i++;
// end of action a1
#endif
#if 0
//DEBUG
Mailbox.pOutputBuffer[i] = x2; i++;
Mailbox.pOutputBuffer[i] = x3; i++;
#endif
#if 1
// action a2
port_write(&Y, x4); i++;
port_write(&Y, x5); i++;
port_write(&Y, x6h + (x6l >> 8)); i++;
port_write(&Y, x7h + (x7l >> 8)); i++;
// end of action a2
#endif
#if 0
//DEBUG
Mailbox.pOutputBuffer[i] = x4; i++;
Mailbox.pOutputBuffer[i] = x5; i++;
Mailbox.pOutputBuffer[i] = x6h + (x6l >> 8); i++;
Mailbox.pOutputBuffer[i] = x7h + (x7l >> 8); i++;
#endif
}
// Get timer value, find the elapsed time and stop
timerValue = e_ctimer_get(E_CTIMER_1);
Mailbox.pTimer1[me.corenum] = E_CTIMER_MAX - timerValue;
e_ctimer_stop(E_CTIMER_1);
}