float ECL_RollController::control(float roll_setpoint, float roll, float roll_rate,
float scaler, bool lock_integrator, float airspeed_min, float airspeed_max, float airspeed)
{
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (dt_micros > 500000) ? 0.0f : dt_micros / 1000000;
float k_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f);
float k_i_rate = _k_i * _tc;
/* input conditioning */
if (!isfinite(airspeed)) {
/* airspeed is NaN, +- INF or not available, pick center of band */
airspeed = 0.5f * (airspeed_min + airspeed_max);
} else if (airspeed < airspeed_min) {
airspeed = airspeed_min;
}
float roll_error = roll_setpoint - roll;
_rate_setpoint = roll_error / _tc;
/* limit the rate */
if (_max_rate > 0.01f) {
_rate_setpoint = (_rate_setpoint > _max_rate) ? _max_rate : _rate_setpoint;
_rate_setpoint = (_rate_setpoint < -_max_rate) ? -_max_rate : _rate_setpoint;
}
_rate_error = _rate_setpoint - roll_rate;
float ilimit_scaled = 0.0f;
if (!lock_integrator && k_i_rate > 0.0f && airspeed > 0.5f * airspeed_min) {
float id = _rate_error * k_i_rate * dt * scaler;
/*
* anti-windup: do not allow integrator to increase into the
* wrong direction if actuator is at limit
*/
if (_last_output < -_max_deflection_rad) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > _max_deflection_rad) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
_integrator += id;
}
/* integrator limit */
_integrator = math::constrain(_integrator, -ilimit_scaled, ilimit_scaled);
/* store non-limited output */
_last_output = ((_rate_error * _k_d * scaler) + _integrator + (_rate_setpoint * k_ff)) * scaler;
return math::constrain(_last_output, -_max_deflection_rad, _max_deflection_rad);
}
float ECL_WheelController::control_bodyrate(const struct ECL_ControlData &ctl_data)
{
/* Do not calculate control signal with bad inputs */
if (!(PX4_ISFINITE(ctl_data.yaw_rate) &&
PX4_ISFINITE(ctl_data.groundspeed) &&
PX4_ISFINITE(ctl_data.groundspeed_scaler))) {
return math::constrain(_last_output, -1.0f, 1.0f);
}
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (float)dt_micros * 1e-6f;
/* lock integral for long intervals */
bool lock_integrator = ctl_data.lock_integrator;
if (dt_micros > 500000) {
lock_integrator = true;
}
/* input conditioning */
float min_speed = 1.0f;
/* Calculate body angular rate error */
_rate_error = _rate_setpoint - ctl_data.yaw_rate; //body angular rate error
if (!lock_integrator && _k_i > 0.0f && ctl_data.groundspeed > min_speed) {
float id = _rate_error * dt * ctl_data.groundspeed_scaler;
/*
* anti-windup: do not allow integrator to increase if actuator is at limit
*/
if (_last_output < -1.0f) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > 1.0f) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
_integrator += id * _k_i;
}
/* integrator limit */
//xxx: until start detection is available: integral part in control signal is limited here
float integrator_constrained = math::constrain(_integrator, -_integrator_max, _integrator_max);
/* Apply PI rate controller and store non-limited output */
_last_output = _rate_setpoint * _k_ff * ctl_data.groundspeed_scaler +
_rate_error * _k_p * ctl_data.groundspeed_scaler * ctl_data.groundspeed_scaler +
integrator_constrained;
/*warnx("wheel: _last_output: %.4f, _integrator: %.4f, scaler %.4f",
(double)_last_output, (double)_integrator, (double)ctl_data.groundspeed_scaler);*/
return math::constrain(_last_output, -1.0f, 1.0f);
}
float ECL_PitchController::control_bodyrate(const struct ECL_ControlData &ctl_data)
{
/* Do not calculate control signal with bad inputs */
if (!(ISFINITE(ctl_data.roll) &&
ISFINITE(ctl_data.pitch) &&
ISFINITE(ctl_data.body_y_rate) &&
ISFINITE(ctl_data.body_z_rate) &&
ISFINITE(ctl_data.yaw_rate_setpoint) &&
ISFINITE(ctl_data.airspeed_min) &&
ISFINITE(ctl_data.airspeed_max) &&
ISFINITE(ctl_data.scaler))) {
return math::constrain(_last_output, -1.0f, 1.0f);
}
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (float)dt_micros * 1e-6f;
/* lock integral for long intervals */
bool lock_integrator = ctl_data.lock_integrator;
if (dt_micros > 500000) {
lock_integrator = true;
}
_rate_error = _bodyrate_setpoint - ctl_data.body_y_rate;
if (!lock_integrator && _k_i > 0.0f) {
float id = _rate_error * dt * ctl_data.scaler;
/*
* anti-windup: do not allow integrator to increase if actuator is at limit
*/
if (_last_output < -1.0f) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > 1.0f) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
/* add and constrain */
_integrator = math::constrain(_integrator + id * _k_i, -_integrator_max, _integrator_max);
}
/* Apply PI rate controller and store non-limited output */
_last_output = _bodyrate_setpoint * _k_ff * ctl_data.scaler +
_rate_error * _k_p * ctl_data.scaler * ctl_data.scaler
+ _integrator; //scaler is proportional to 1/airspeed
return math::constrain(_last_output, -1.0f, 1.0f);
}
float ECL_YawController::control(float roll, float yaw_rate, float accel_y, float scaler, bool lock_integrator,
float airspeed_min, float airspeed_max, float aspeed)
{
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (dt_micros > 500000) ? 0.0f : dt_micros / 1000000;
return 0.0f;
}
float ECL_WheelController::control_bodyrate(const struct ECL_ControlData &ctl_data)
{
/* Do not calculate control signal with bad inputs */
if (!(ISFINITE(ctl_data.body_z_rate) &&
ISFINITE(ctl_data.groundspeed) &&
ISFINITE(ctl_data.groundspeed_scaler))) {
return math::constrain(_last_output, -1.0f, 1.0f);
}
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (float)dt_micros * 1e-6f;
/* lock integral for long intervals */
bool lock_integrator = ctl_data.lock_integrator;
if (dt_micros > 500000) {
lock_integrator = true;
}
/* input conditioning */
float min_speed = 1.0f;
/* Calculate body angular rate error */
_rate_error = _rate_setpoint - ctl_data.body_z_rate; //body angular rate error
if (!lock_integrator && _k_i > 0.0f && ctl_data.groundspeed > min_speed) {
float id = _rate_error * dt * ctl_data.groundspeed_scaler;
/*
* anti-windup: do not allow integrator to increase if actuator is at limit
*/
if (_last_output < -1.0f) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > 1.0f) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
/* add and constrain */
_integrator = math::constrain(_integrator + id * _k_i, -_integrator_max, _integrator_max);
}
/* Apply PI rate controller and store non-limited output */
_last_output = _rate_setpoint * _k_ff * ctl_data.groundspeed_scaler +
ctl_data.groundspeed_scaler * ctl_data.groundspeed_scaler * (_rate_error * _k_p + _integrator);
return math::constrain(_last_output, -1.0f, 1.0f);
}
float ECL_YawController::control_bodyrate(const struct ECL_ControlData &ctl_data)
{
switch (_coordinated_method) {
case COORD_METHOD_OPEN:
case COORD_METHOD_CLOSEACC:
return control_bodyrate_impl(ctl_data);
default:
static hrt_abstime last_print = 0;
if (ecl_elapsed_time(&last_print) > 5e6) {
warnx("invalid param setting FW_YCO_METHOD");
last_print = ecl_absolute_time();
}
}
return math::constrain(_last_output, -1.0f, 1.0f);
}
float ECL_YawController::control_attitude(const struct ECL_ControlData &ctl_data)
{
switch (_coordinated_method) {
case COORD_METHOD_OPEN:
return control_attitude_impl_openloop(ctl_data);
case COORD_METHOD_CLOSEACC:
return control_attitude_impl_accclosedloop(ctl_data);
default:
static hrt_abstime last_print = 0;
if (ecl_elapsed_time(&last_print) > 5e6) {
warnx("invalid param setting FW_YCO_METHOD");
last_print = ecl_absolute_time();
}
}
return _rate_setpoint;
}
float ECL_RollController::control_bodyrate(const struct ECL_ControlData &ctl_data)
{
/* Do not calculate control signal with bad inputs */
if (!(isfinite(ctl_data.pitch) &&
isfinite(ctl_data.roll_rate) &&
isfinite(ctl_data.yaw_rate) &&
isfinite(ctl_data.yaw_rate_setpoint) &&
isfinite(ctl_data.airspeed_min) &&
isfinite(ctl_data.airspeed_max) &&
isfinite(ctl_data.scaler))) {
perf_count(_nonfinite_input_perf);
return math::constrain(_last_output, -1.0f, 1.0f);
}
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (float)dt_micros * 1e-6f;
/* lock integral for long intervals */
bool lock_integrator = ctl_data.lock_integrator;
if (dt_micros > 500000) {
lock_integrator = true;
}
/* input conditioning */
float airspeed = ctl_data.airspeed;
if (!isfinite(airspeed)) {
/* airspeed is NaN, +- INF or not available, pick center of band */
airspeed = 0.5f * (ctl_data.airspeed_min + ctl_data.airspeed_max);
} else if (airspeed < ctl_data.airspeed_min) {
airspeed = ctl_data.airspeed_min;
}
/* Transform setpoint to body angular rates (jacobian) */
_bodyrate_setpoint = _rate_setpoint - sinf(ctl_data.pitch) * ctl_data.yaw_rate_setpoint;
/* Transform estimation to body angular rates (jacobian) */
float roll_bodyrate = ctl_data.roll_rate - sinf(ctl_data.pitch) * ctl_data.yaw_rate;
/* Calculate body angular rate error */
_rate_error = _bodyrate_setpoint - roll_bodyrate; //body angular rate error
if (!lock_integrator && _k_i > 0.0f && airspeed > 0.5f * ctl_data.airspeed_min) {
float id = _rate_error * dt * ctl_data.scaler;
/*
* anti-windup: do not allow integrator to increase if actuator is at limit
*/
if (_last_output < -1.0f) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > 1.0f) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
_integrator += id;
}
/* integrator limit */
//xxx: until start detection is available: integral part in control signal is limited here
float integrator_constrained = math::constrain(_integrator * _k_i, -_integrator_max, _integrator_max);
//warnx("roll: _integrator: %.4f, _integrator_max: %.4f", (double)_integrator, (double)_integrator_max);
/* Apply PI rate controller and store non-limited output */
_last_output = _bodyrate_setpoint * _k_ff * ctl_data.scaler +
_rate_error * _k_p * ctl_data.scaler * ctl_data.scaler
+ integrator_constrained; //scaler is proportional to 1/airspeed
return math::constrain(_last_output, -1.0f, 1.0f);
}
float ECL_PitchController::control_bodyrate(const ECL_ControlData &ctl_data)
{
/* Do not calculate control signal with bad inputs */
if (!(PX4_ISFINITE(ctl_data.roll) &&
PX4_ISFINITE(ctl_data.pitch) &&
PX4_ISFINITE(ctl_data.pitch_rate) &&
PX4_ISFINITE(ctl_data.yaw_rate) &&
PX4_ISFINITE(ctl_data.yaw_rate_setpoint) &&
PX4_ISFINITE(ctl_data.airspeed_min) &&
PX4_ISFINITE(ctl_data.airspeed_max) &&
PX4_ISFINITE(ctl_data.scaler))) {
perf_count(_nonfinite_input_perf);
return math::constrain(_last_output, -1.0f, 1.0f);
}
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (float)dt_micros * 1e-6f;
/* lock integral for long intervals */
bool lock_integrator = ctl_data.lock_integrator;
if (dt_micros > 500000) {
lock_integrator = true;
}
/* Transform setpoint to body angular rates (jacobian) */
_bodyrate_setpoint = cosf(ctl_data.roll) * _rate_setpoint +
cosf(ctl_data.pitch) * sinf(ctl_data.roll) * ctl_data.yaw_rate_setpoint;
/* apply turning offset to desired bodyrate setpoint*/
/* flying inverted (wings upside down)*/
bool inverted = false;
float constrained_roll;
/* roll is used as feedforward term and inverted flight needs to be considered */
if (fabsf(ctl_data.roll) < math::radians(90.0f)) {
/* not inverted, but numerically still potentially close to infinity */
constrained_roll = math::constrain(ctl_data.roll, math::radians(-80.0f), math::radians(80.0f));
} else {
/* inverted flight, constrain on the two extremes of -pi..+pi to avoid infinity */
inverted = true;
/* note: the ranges are extended by 10 deg here to avoid numeric resolution effects */
if (ctl_data.roll > 0.0f) {
/* right hemisphere */
constrained_roll = math::constrain(ctl_data.roll, math::radians(100.0f), math::radians(180.0f));
} else {
/* left hemisphere */
constrained_roll = math::constrain(ctl_data.roll, math::radians(-100.0f), math::radians(-180.0f));
}
}
/* input conditioning */
float airspeed = constrain_airspeed(ctl_data.airspeed, ctl_data.airspeed_min, ctl_data.airspeed_max);
/* Calculate desired body fixed y-axis angular rate needed to compensate for roll angle.
For reference see Automatic Control of Aircraft and Missiles by John H. Blakelock, pg. 175
Availible on google books 8/11/2015:
https://books.google.com/books?id=ubcczZUDCsMC&pg=PA175#v=onepage&q&f=false*/
float body_fixed_turn_offset = (fabsf((CONSTANTS_ONE_G / airspeed) *
tanf(constrained_roll) * sinf(constrained_roll)));
if (inverted) {
body_fixed_turn_offset = -body_fixed_turn_offset;
}
/* Finally add the turn offset to your bodyrate setpoint*/
_bodyrate_setpoint += body_fixed_turn_offset;
_rate_error = _bodyrate_setpoint - ctl_data.pitch_rate;
if (!lock_integrator && _k_i > 0.0f) {
float id = _rate_error * dt * ctl_data.scaler;
/*
* anti-windup: do not allow integrator to increase if actuator is at limit
*/
if (_last_output < -1.0f) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > 1.0f) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
_integrator += id;
}
_dif_rate_error = _rate_error - _last_rate_error;
_last_rate_error = _rate_error;
/* integrator limit */
//xxx: until start detection is available: integral part in control signal is limited here
float integrator_constrained = math::constrain(_integrator * _k_i, -_integrator_max, _integrator_max);
/* Apply PI rate controller and store non-limited output */
_last_output = _bodyrate_setpoint * _k_ff * ctl_data.scaler +
_rate_error * _k_p * ctl_data.scaler * ctl_data.scaler
+ integrator_constrained; //scaler is proportional to 1/airspeed
// warnx("pitch: _integrator: %.4f, _integrator_max: %.4f, airspeed %.4f, _k_i %.4f, _k_p: %.4f", (double)_integrator, (double)_integrator_max, (double)airspeed, (double)_k_i, (double)_k_p);
// warnx("roll: _last_output %.4f", (double)_last_output);
fp = open(PX4_ROOTFSDIR"/fs/microsd/log/output_pitch.csv", O_CREAT | O_WRONLY | O_DSYNC | O_APPEND);
int bytes = sprintf(buffer, "%.6f,%.6f,%.6f\n", (double)_rate_error, (double)_dif_rate_error, (double)math::constrain(_last_output, -1.0f, 1.0f));
write(fp, buffer, bytes);
close(fp);
return math::constrain(_last_output, -1.0f, 1.0f);
}
float ECL_RollController::control_bodyrate(float pitch,
float roll_rate, float yaw_rate,
float yaw_rate_setpoint,
float airspeed_min, float airspeed_max, float airspeed, float scaler, bool lock_integrator)
{
/* get the usual dt estimate */
uint64_t dt_micros = ecl_elapsed_time(&_last_run);
_last_run = ecl_absolute_time();
float dt = (float)dt_micros * 1e-6f;
/* lock integral for long intervals */
if (dt_micros > 500000)
lock_integrator = true;
// float k_ff = math::max((_k_p - _k_i * _tc) * _tc - _k_d, 0.0f);
float k_ff = 0; //xxx: param
/* input conditioning */
// warnx("airspeed pre %.4f", (double)airspeed);
if (!isfinite(airspeed)) {
/* airspeed is NaN, +- INF or not available, pick center of band */
airspeed = 0.5f * (airspeed_min + airspeed_max);
} else if (airspeed < airspeed_min) {
airspeed = airspeed_min;
}
/* Transform setpoint to body angular rates */
_bodyrate_setpoint = _rate_setpoint - sinf(pitch) * yaw_rate_setpoint; //jacobian
/* Transform estimation to body angular rates */
float roll_bodyrate = roll_rate - sinf(pitch) * yaw_rate; //jacobian
/* Calculate body angular rate error */
_rate_error = _bodyrate_setpoint - roll_bodyrate; //body angular rate error
if (!lock_integrator && _k_i > 0.0f && airspeed > 0.5f * airspeed_min) {
float id = _rate_error * dt;
/*
* anti-windup: do not allow integrator to increase if actuator is at limit
*/
if (_last_output < -1.0f) {
/* only allow motion to center: increase value */
id = math::max(id, 0.0f);
} else if (_last_output > 1.0f) {
/* only allow motion to center: decrease value */
id = math::min(id, 0.0f);
}
_integrator += id;
}
/* integrator limit */
//xxx: until start detection is available: integral part in control signal is limited here
float integrator_constrained = math::constrain(_integrator * _k_i, -_integrator_max, _integrator_max);
//warnx("roll: _integrator: %.4f, _integrator_max: %.4f", (double)_integrator, (double)_integrator_max);
/* Apply PI rate controller and store non-limited output */
_last_output = (_bodyrate_setpoint * _k_ff + _rate_error * _k_p + integrator_constrained) * scaler * scaler; //scaler is proportional to 1/airspeed
return math::constrain(_last_output, -1.0f, 1.0f);
}
