/*
* deferslc
*
* Do slc stuff that was deferred.
*/
void deferslc(void) {
if (def_slcbuf) {
start_slc(1);
do_opt_slc(def_slcbuf, def_slclen);
end_slc(0);
free(def_slcbuf);
def_slcbuf = (unsigned char *)0;
def_slclen = 0;
}
}
/*
* localstat
*
* This function handles all management of linemode.
*
* Linemode allows the client to do the local editing of data
* and send only complete lines to the server. Linemode state is
* based on the state of the pty driver. If the pty is set for
* external processing, then we can use linemode. Further, if we
* can use real linemode, then we can look at the edit control bits
* in the pty to determine what editing the client should do.
*
* Linemode support uses the following state flags to keep track of
* current and desired linemode state.
* alwayslinemode : true if -l was specified on the telnetd
* command line. It means to have linemode on as much as
* possible.
*
* lmodetype: signifies whether the client can
* handle real linemode, or if use of kludgeomatic linemode
* is preferred. It will be set to one of the following:
* REAL_LINEMODE : use linemode option
* NO_KLUDGE : don't initiate kludge linemode.
* KLUDGE_LINEMODE : use kludge linemode
* NO_LINEMODE : client is ignorant of linemode
*
* linemode, uselinemode : linemode is true if linemode
* is currently on, uselinemode is the state that we wish
* to be in. If another function wishes to turn linemode
* on or off, it sets or clears uselinemode.
*
* editmode, useeditmode : like linemode/uselinemode, but
* these contain the edit mode states (edit and trapsig).
*
* The state variables correspond to some of the state information
* in the pty.
* linemode:
* In real linemode, this corresponds to whether the pty
* expects external processing of incoming data.
* In kludge linemode, this more closely corresponds to the
* whether normal processing is on or not. (ICANON in
* system V, or COOKED mode in BSD.)
* If the -l option was specified (alwayslinemode), then
* an attempt is made to force external processing on at
* all times.
*
* The following heuristics are applied to determine linemode
* handling within the server.
* 1) Early on in starting up the server, an attempt is made
* to negotiate the linemode option. If this succeeds
* then lmodetype is set to REAL_LINEMODE and all linemode
* processing occurs in the context of the linemode option.
* 2) If the attempt to negotiate the linemode option failed,
* and the "-k" (don't initiate kludge linemode) isn't set,
* then we try to use kludge linemode. We test for this
* capability by sending "do Timing Mark". If a positive
* response comes back, then we assume that the client
* understands kludge linemode (ech!) and the
* lmodetype flag is set to KLUDGE_LINEMODE.
* 3) Otherwise, linemode is not supported at all and
* lmodetype remains set to NO_LINEMODE (which happens
* to be 0 for convenience).
* 4) At any time a command arrives that implies a higher
* state of linemode support in the client, we move to that
* linemode support.
*
* A short explanation of kludge linemode is in order here.
* 1) The heuristic to determine support for kludge linemode
* is to send a do timing mark. We assume that a client
* that supports timing marks also supports kludge linemode.
* A risky proposition at best.
* 2) Further negotiation of linemode is done by changing the
* the server's state regarding SGA. If server will SGA,
* then linemode is off, if server won't SGA, then linemode
* is on.
*/
void
localstat(void)
{
int need_will_echo = 0;
/*
* Check for changes to flow control if client supports it.
*/
flowstat();
/*
* Check linemode on/off state
*/
uselinemode = tty_linemode();
/*
* If alwayslinemode is on, and pty is changing to turn it off, then
* force linemode back on.
*/
if (alwayslinemode && linemode && !uselinemode) {
uselinemode = 1;
tty_setlinemode(uselinemode);
}
if (uselinemode) {
/*
* Check for state of BINARY options.
*
* We only need to do the binary dance if we are actually going
* to use linemode. As this confuses some telnet clients
* that don't support linemode, and doesn't gain us
* anything, we don't do it unless we're doing linemode.
* -Crh ([email protected])
*/
if (tty_isbinaryin()) {
if (his_want_state_is_wont(TELOPT_BINARY))
send_do(TELOPT_BINARY, 1);
} else {
if (his_want_state_is_will(TELOPT_BINARY))
send_dont(TELOPT_BINARY, 1);
}
if (tty_isbinaryout()) {
if (my_want_state_is_wont(TELOPT_BINARY))
send_will(TELOPT_BINARY, 1);
} else {
if (my_want_state_is_will(TELOPT_BINARY))
send_wont(TELOPT_BINARY, 1);
}
}
#ifdef ENCRYPTION
/*
* If the terminal is not echoing, but editing is enabled,
* something like password input is going to happen, so
* if we the other side is not currently sending encrypted
* data, ask the other side to start encrypting.
*/
if (his_state_is_will(TELOPT_ENCRYPT)) {
static int enc_passwd = 0;
if (uselinemode && !tty_isecho() && tty_isediting()
&& (enc_passwd == 0) && !decrypt_input) {
encrypt_send_request_start();
enc_passwd = 1;
} else if (enc_passwd) {
encrypt_send_request_end();
enc_passwd = 0;
}
}
#endif /* ENCRYPTION */
/*
* Do echo mode handling as soon as we know what the
* linemode is going to be.
* If the pty has echo turned off, then tell the client that
* the server will echo. If echo is on, then the server
* will echo if in character mode, but in linemode the
* client should do local echoing. The state machine will
* not send anything if it is unnecessary, so don't worry
* about that here.
*
* If we need to send the WILL ECHO (because echo is off),
* then delay that until after we have changed the MODE.
* This way, when the user is turning off both editing
* and echo, the client will get editing turned off first.
* This keeps the client from going into encryption mode
* and then right back out if it is doing auto-encryption
* when passwords are being typed.
*/
if (uselinemode) {
if (tty_isecho())
send_wont(TELOPT_ECHO, 1);
else
need_will_echo = 1;
#ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_OK)
lmodetype = KLUDGE_LINEMODE;
#endif
}
/*
* If linemode is being turned off, send appropriate
* command and then we're all done.
*/
if (!uselinemode && linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_dont(TELOPT_LINEMODE, 1);
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE)
send_will(TELOPT_SGA, 1);
# endif /* KLUDGELINEMODE */
send_will(TELOPT_ECHO, 1);
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* If using real linemode check edit modes for possible later use.
* If we are in kludge linemode, do the SGA negotiation.
*/
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
useeditmode = 0;
if (tty_isediting())
useeditmode |= MODE_EDIT;
if (tty_istrapsig())
useeditmode |= MODE_TRAPSIG;
if (tty_issofttab())
useeditmode |= MODE_SOFT_TAB;
if (tty_islitecho())
useeditmode |= MODE_LIT_ECHO;
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE) {
if (tty_isediting() && uselinemode)
send_wont(TELOPT_SGA, 1);
else
send_will(TELOPT_SGA, 1);
}
# endif /* KLUDGELINEMODE */
/*
* Negotiate linemode on if pty state has changed to turn it on.
* Send appropriate command and send along edit mode, then all done.
*/
if (uselinemode && !linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_LINEMODE) {
send_wont(TELOPT_SGA, 1);
} else if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_do(TELOPT_LINEMODE, 1);
/* send along edit modes */
output_data("%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
editmode = useeditmode;
# ifdef KLUDGELINEMODE
}
# endif /* KLUDGELINEMODE */
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* None of what follows is of any value if not using
* real linemode.
*/
if (lmodetype < REAL_LINEMODE)
goto done;
# endif /* KLUDGELINEMODE */
if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
/*
* If edit mode changed, send edit mode.
*/
if (useeditmode != editmode) {
/*
* Send along appropriate edit mode mask.
*/
output_data("%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
editmode = useeditmode;
}
/*
* Check for changes to special characters in use.
*/
start_slc(0);
check_slc();
(void) end_slc(0);
}
done:
if (need_will_echo)
send_will(TELOPT_ECHO, 1);
/*
* Some things should be deferred until after the pty state has
* been set by the local process. Do those things that have been
* deferred now. This only happens once.
*/
if (_terminit == 0) {
_terminit = 1;
defer_terminit();
}
netflush();
set_termbuf();
return;
} /* end of localstat */
/*
* localstat
*
* This function handles all management of linemode.
*
* Linemode allows the client to do the local editing of data
* and send only complete lines to the server. Linemode state is
* based on the state of the pty driver. If the pty is set for
* external processing, then we can use linemode. Further, if we
* can use real linemode, then we can look at the edit control bits
* in the pty to determine what editing the client should do.
*
* Linemode support uses the following state flags to keep track of
* current and desired linemode state.
* alwayslinemode : true if -l was specified on the telnetd
* command line. It means to have linemode on as much as
* possible.
*
* lmodetype: signifies whether the client can
* handle real linemode, or if use of kludgeomatic linemode
* is preferred. It will be set to one of the following:
* REAL_LINEMODE : use linemode option
* NO_KLUDGE : don't initiate kludge linemode.
* KLUDGE_LINEMODE : use kludge linemode
* NO_LINEMODE : client is ignorant of linemode
*
* linemode, uselinemode : linemode is true if linemode
* is currently on, uselinemode is the state that we wish
* to be in. If another function wishes to turn linemode
* on or off, it sets or clears uselinemode.
*
* editmode, useeditmode : like linemode/uselinemode, but
* these contain the edit mode states (edit and trapsig).
*
* The state variables correspond to some of the state information
* in the pty.
* linemode:
* In real linemode, this corresponds to whether the pty
* expects external processing of incoming data.
* In kludge linemode, this more closely corresponds to the
* whether normal processing is on or not. (ICANON in
* system V, or COOKED mode in BSD.)
* If the -l option was specified (alwayslinemode), then
* an attempt is made to force external processing on at
* all times.
*
* The following heuristics are applied to determine linemode
* handling within the server.
* 1) Early on in starting up the server, an attempt is made
* to negotiate the linemode option. If this succeeds
* then lmodetype is set to REAL_LINEMODE and all linemode
* processing occurs in the context of the linemode option.
* 2) If the attempt to negotiate the linemode option failed,
* and the "-k" (don't initiate kludge linemode) isn't set,
* then we try to use kludge linemode. We test for this
* capability by sending "do Timing Mark". If a positive
* response comes back, then we assume that the client
* understands kludge linemode (ech!) and the
* lmodetype flag is set to KLUDGE_LINEMODE.
* 3) Otherwise, linemode is not supported at all and
* lmodetype remains set to NO_LINEMODE (which happens
* to be 0 for convenience).
* 4) At any time a command arrives that implies a higher
* state of linemode support in the client, we move to that
* linemode support.
*
* A short explanation of kludge linemode is in order here.
* 1) The heuristic to determine support for kludge linemode
* is to send a do timing mark. We assume that a client
* that supports timing marks also supports kludge linemode.
* A risky proposition at best.
* 2) Further negotiation of linemode is done by changing the
* the server's state regarding SGA. If server will SGA,
* then linemode is off, if server won't SGA, then linemode
* is on.
*/
void
localstat()
{
int need_will_echo = 0;
#if defined(CRAY2) && defined(UNICOS5)
/*
* Keep track of that ol' CR/NL mapping while we're in the
* neighborhood.
*/
newmap = tty_isnewmap();
#endif /* defined(CRAY2) && defined(UNICOS5) */
/*
* Check for state of BINARY options.
*/
if (tty_isbinaryin()) {
if (his_want_state_is_wont(TELOPT_BINARY))
send_do(TELOPT_BINARY, 1);
} else {
if (his_want_state_is_will(TELOPT_BINARY))
send_dont(TELOPT_BINARY, 1);
}
if (tty_isbinaryout()) {
if (my_want_state_is_wont(TELOPT_BINARY))
send_will(TELOPT_BINARY, 1);
} else {
if (my_want_state_is_will(TELOPT_BINARY))
send_wont(TELOPT_BINARY, 1);
}
/*
* Check for changes to flow control if client supports it.
*/
flowstat();
/*
* Check linemode on/off state
*/
uselinemode = tty_linemode();
/*
* If alwayslinemode is on, and pty is changing to turn it off, then
* force linemode back on.
*/
if (alwayslinemode && linemode && !uselinemode) {
uselinemode = 1;
tty_setlinemode(uselinemode);
}
/*
* Do echo mode handling as soon as we know what the
* linemode is going to be.
* If the pty has echo turned off, then tell the client that
* the server will echo. If echo is on, then the server
* will echo if in character mode, but in linemode the
* client should do local echoing. The state machine will
* not send anything if it is unnecessary, so don't worry
* about that here.
*
* If we need to send the WILL ECHO (because echo is off),
* then delay that until after we have changed the MODE.
* This way, when the user is turning off both editing
* and echo, the client will get editing turned off first.
* This keeps the client from going into encryption mode
* and then right back out if it is doing auto-encryption
* when passwords are being typed.
*/
if (uselinemode) {
if (tty_isecho())
send_wont(TELOPT_ECHO, 1);
else
need_will_echo = 1;
#ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_OK)
lmodetype = KLUDGE_LINEMODE;
#endif
}
/*
* If linemode is being turned off, send appropriate
* command and then we're all done.
*/
if (!uselinemode && linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_dont(TELOPT_LINEMODE, 1);
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE)
send_will(TELOPT_SGA, 1);
# endif /* KLUDGELINEMODE */
send_will(TELOPT_ECHO, 1);
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* If using real linemode check edit modes for possible later use.
* If we are in kludge linemode, do the SGA negotiation.
*/
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
useeditmode = 0;
if (tty_isediting())
useeditmode |= MODE_EDIT;
if (tty_istrapsig())
useeditmode |= MODE_TRAPSIG;
if (tty_issofttab())
useeditmode |= MODE_SOFT_TAB;
if (tty_islitecho())
useeditmode |= MODE_LIT_ECHO;
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE) {
if (tty_isediting() && uselinemode)
send_wont(TELOPT_SGA, 1);
else
send_will(TELOPT_SGA, 1);
}
# endif /* KLUDGELINEMODE */
/*
* Negotiate linemode on if pty state has changed to turn it on.
* Send appropriate command and send along edit mode, then all done.
*/
if (uselinemode && !linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_LINEMODE) {
send_wont(TELOPT_SGA, 1);
} else if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_do(TELOPT_LINEMODE, 1);
/* send along edit modes */
(void) sprintf(nfrontp, "%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
nfrontp += 7;
editmode = useeditmode;
# ifdef KLUDGELINEMODE
}
# endif /* KLUDGELINEMODE */
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* None of what follows is of any value if not using
* real linemode.
*/
if (lmodetype < REAL_LINEMODE)
goto done;
# endif /* KLUDGELINEMODE */
if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
/*
* If edit mode changed, send edit mode.
*/
if (useeditmode != editmode) {
/*
* Send along appropriate edit mode mask.
*/
(void) sprintf(nfrontp, "%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
nfrontp += 7;
editmode = useeditmode;
}
/*
* Check for changes to special characters in use.
*/
start_slc(0);
check_slc();
(void) end_slc(0);
}
done:
if (need_will_echo)
send_will(TELOPT_ECHO, 1);
/*
* Some things should be deferred until after the pty state has
* been set by the local process. Do those things that have been
* deferred now. This only happens once.
*/
if (_terminit == 0) {
_terminit = 1;
defer_terminit();
}
netflush();
set_termbuf();
return;
} /* end of localstat */
