bool miot_uart_dev_init(struct miot_uart_state *us) {
struct miot_uart_config *cfg = us->cfg;
if (!esp_uart_validate_config(cfg)) return false;
ETS_INTR_DISABLE(ETS_UART_INUM);
uart_div_modify(us->uart_no, UART_CLK_FREQ / cfg->baud_rate);
if (us->uart_no == 0) {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
if (cfg->swap_rxcts_txrts) {
SET_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART0_PIN_SWAP);
} else {
CLEAR_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART0_PIN_SWAP);
}
} else {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_GPIO2_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
if (cfg->swap_rxcts_txrts) {
SET_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART1_PIN_SWAP);
} else {
CLEAR_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART1_PIN_SWAP);
}
}
unsigned int conf0 = 0b011100; /* 8-N-1 */
if (cfg->tx_fc_ena) {
conf0 |= UART_TX_FLOW_EN;
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, FUNC_U0CTS);
}
WRITE_PERI_REG(UART_CONF0(us->uart_no), conf0);
unsigned int conf1 = cfg->rx_fifo_full_thresh;
conf1 |= (cfg->tx_fifo_empty_thresh << 8);
if (cfg->rx_fifo_alarm >= 0) {
conf1 |= UART_RX_TOUT_EN | ((cfg->rx_fifo_alarm & 0x7f) << 24);
}
if (cfg->rx_fc_ena && cfg->rx_fifo_fc_thresh > 0) {
/* UART_RX_FLOW_EN will be set in uart_start. */
conf1 |= ((cfg->rx_fifo_fc_thresh & 0x7f) << 16);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
}
WRITE_PERI_REG(UART_CONF1(us->uart_no), conf1);
s_us[us->uart_no] = us;
/* Start with TX and RX ints disabled. */
WRITE_PERI_REG(UART_INT_ENA(us->uart_no), UART_INFO_INTS);
ETS_UART_INTR_ATTACH(esp_uart_isr, NULL);
ETS_INTR_ENABLE(ETS_UART_INUM);
return true;
}
int esp_uart_init(struct esp_uart_config *cfg) {
if (cfg == NULL || !esp_uart_validate_config(cfg)) return 0;
struct esp_uart_state *us = s_us[cfg->uart_no];
if (us != NULL) {
s_us[cfg->uart_no] = NULL;
esp_uart_deinit(us);
}
us = calloc(1, sizeof(*us));
us->cfg = cfg;
cs_rbuf_init(&us->rx_buf, cfg->rx_buf_size);
cs_rbuf_init(&us->tx_buf, cfg->tx_buf_size);
ETS_INTR_DISABLE(ETS_UART_INUM);
uart_div_modify(cfg->uart_no, UART_CLK_FREQ / cfg->baud_rate);
if (cfg->uart_no == 0) {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
if (cfg->swap_rxtx_ctsrts) {
SET_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART0_PIN_SWAP);
} else {
CLEAR_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART0_PIN_SWAP);
}
} else {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_GPIO2_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
if (cfg->swap_rxtx_ctsrts) {
SET_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART1_PIN_SWAP);
} else {
CLEAR_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART1_PIN_SWAP);
}
}
unsigned int conf0 = 0b011100; /* 8-N-1 */
if (cfg->tx_fc_ena) {
conf0 |= UART_TX_FLOW_EN;
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, FUNC_U0CTS);
}
WRITE_PERI_REG(UART_CONF0(cfg->uart_no), conf0);
unsigned int conf1 = cfg->rx_fifo_full_thresh;
conf1 |= (cfg->tx_fifo_empty_thresh << 8);
if (cfg->rx_fifo_alarm >= 0) {
conf1 |= UART_RX_TOUT_EN | ((cfg->rx_fifo_alarm & 0x7f) << 24);
}
if (cfg->rx_fc_ena && cfg->rx_fifo_fc_thresh > 0) {
/* UART_RX_FLOW_EN will be set in uart_start. */
conf1 |= ((cfg->rx_fifo_fc_thresh & 0x7f) << 16);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
}
WRITE_PERI_REG(UART_CONF1(cfg->uart_no), conf1);
if (cfg->status_interval_ms > 0) {
os_timer_disarm(&us->status_timer);
os_timer_setfn(&us->status_timer, esp_uart_print_status, us);
os_timer_arm(&us->status_timer, cfg->status_interval_ms, 1 /* repeat */);
}
s_us[cfg->uart_no] = us;
/* Start with TX and RX ints disabled. */
WRITE_PERI_REG(UART_INT_ENA(cfg->uart_no), UART_INFO_INTS);
ETS_UART_INTR_ATTACH(esp_uart_isr, NULL);
ETS_INTR_ENABLE(ETS_UART_INUM);
return 1;
}
bool mgos_uart_hal_configure(struct mgos_uart_state *us,
const struct mgos_uart_config *cfg) {
if (!esp_uart_validate_config(cfg)) return false;
#ifdef RTOS_SDK
_xt_isr_mask(1 << ETS_UART_INUM);
#else
ETS_INTR_DISABLE(ETS_UART_INUM);
#endif
uart_div_modify(us->uart_no, UART_CLK_FREQ / cfg->baud_rate);
if (us->uart_no == 0) {
if (cfg->dev.swap_rxcts_txrts) {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_MTCK_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, 4 /* FUNC_U0CTS */);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
SET_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART0_PIN_SWAP);
} else {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, 0 /* FUNC_U0RXD */);
CLEAR_PERI_REG_MASK(PERIPHS_DPORT_BASEADDR + HOST_INF_SEL,
PERI_IO_UART0_PIN_SWAP);
}
} else {
if (cfg->dev.swap_rxcts_txrts) {
/* Swapping pins of UART1 is not supported, they all conflict with SPI
* flash anyway. */
return false;
} else {
PIN_PULLUP_DIS(PERIPHS_IO_MUX_GPIO2_U);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
}
}
unsigned int conf0 = 0;
switch (cfg->num_data_bits) {
case 5:
break;
case 6:
conf0 |= 1 << UART_BIT_NUM_S;
break;
case 7:
conf0 |= 2 << UART_BIT_NUM_S;
break;
case 8:
conf0 |= 3 << UART_BIT_NUM_S;
break;
default:
return false;
}
switch (cfg->parity) {
case MGOS_UART_PARITY_NONE:
break;
case MGOS_UART_PARITY_EVEN:
conf0 |= UART_PARITY_EN;
break;
case MGOS_UART_PARITY_ODD:
conf0 |= (UART_PARITY_EN | UART_PARITY_ODD);
break;
}
switch (cfg->stop_bits) {
case MGOS_UART_STOP_BITS_1:
conf0 |= 1 << UART_STOP_BIT_NUM_S;
break;
case MGOS_UART_STOP_BITS_1_5:
conf0 |= 2 << UART_STOP_BIT_NUM_S;
break;
case MGOS_UART_STOP_BITS_2:
conf0 |= 3 << UART_STOP_BIT_NUM_S;
break;
}
if (cfg->tx_fc_type == MGOS_UART_FC_HW) {
conf0 |= UART_TX_FLOW_EN;
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, FUNC_U0CTS);
}
WRITE_PERI_REG(UART_CONF0(us->uart_no), conf0);
unsigned int conf1 = cfg->dev.rx_fifo_full_thresh;
conf1 |= (cfg->dev.tx_fifo_empty_thresh << 8);
if (cfg->dev.rx_fifo_alarm >= 0) {
conf1 |= UART_RX_TOUT_EN | ((cfg->dev.rx_fifo_alarm & 0x7f) << 24);
}
if (cfg->rx_fc_type == MGOS_UART_FC_HW && cfg->dev.rx_fifo_fc_thresh > 0) {
/* UART_RX_FLOW_EN will be set in uart_start. */
conf1 |= ((cfg->dev.rx_fifo_fc_thresh & 0x7f) << 16);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
}
WRITE_PERI_REG(UART_CONF1(us->uart_no), conf1);
#ifdef RTOS_SDK
_xt_isr_unmask(1 << ETS_UART_INUM);
#else
ETS_INTR_ENABLE(ETS_UART_INUM);
#endif
return true;
}
