static void exynos4_handler_tmu_state(struct work_struct *work)
{
struct delayed_work *delayed_work = to_delayed_work(work);
struct s5p_tmu_info *info =
container_of(delayed_work, struct s5p_tmu_info, polling);
struct s5p_platform_tmu *data = info->dev->platform_data;
unsigned int cur_temp;
static int auto_refresh_changed;
static int check_handle;
int trend = 0;
int cpu = 0;
mutex_lock(&tmu_lock);
cur_temp = get_curr_temp(info);
trend = cur_temp - info->last_temperature;
pr_debug("curr_temp = %u, temp_diff = %d\n", cur_temp, trend);
switch (info->tmu_state) {
#if defined(CONFIG_TC_VOLTAGE)
case TMU_STATUS_TC:
/* lock has priority than unlock */
if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
} else if (cur_temp >= data->ts.stop_tc) {
if (exynos_tc_volt(info, 0) < 0) {
pr_err("TMU: unlock error!\n");
} else {
info->tmu_state = TMU_STATUS_NORMAL;
pr_info("change state: tc -> normal.\n");
}
}
/* free if upper limit is locked */
if (check_handle) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle = 0;
}
break;
#endif
case TMU_STATUS_NORMAL:
/* 1. change state: 1st-throttling */
if (cur_temp >= data->ts.start_1st_throttle) {
info->tmu_state = TMU_STATUS_THROTTLED;
pr_info("change state: normal->throttle.\n");
#if defined(CONFIG_TC_VOLTAGE)
/* check whether temp compesation need or not */
} else if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0) {
pr_err("TMU: lock error!\n");
} else {
info->tmu_state = TMU_STATUS_TC;
pr_info("change state: normal->tc.\n");
}
#endif
/* 2. polling end and uevent */
} else if ((cur_temp <= data->ts.stop_1st_throttle)
&& (cur_temp <= data->ts.stop_mem_throttle)) {
if (check_handle & THROTTLE_FLAG) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle &= ~(THROTTLE_FLAG);
}
pr_debug("check_handle = %d\n", check_handle);
notify_change_of_tmu_state(info);
pr_info("normal: free cpufreq_limit & interrupt enable.\n");
for_each_online_cpu(cpu)
cpufreq_update_policy(cpu);
/* clear to prevent from interfupt by peindig bit */
__raw_writel(INTCLEARALL,
info->tmu_base + EXYNOS4_TMU_INTCLEAR);
exynos_interrupt_enable(info, 1);
enable_irq(info->irq);
mutex_unlock(&tmu_lock);
return;
}
break;
case TMU_STATUS_THROTTLED:
/* 1. change state: 2nd-throttling or warning */
if (cur_temp >= data->ts.start_2nd_throttle) {
info->tmu_state = TMU_STATUS_WARNING;
pr_info("change state: 1st throttle->2nd throttle.\n");
#if defined(CONFIG_TC_VOLTAGE)
/* check whether temp compesation need or not */
} else if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
else
info->tmu_state = TMU_STATUS_TC;
#endif
/* 2. cpufreq limitation and uevent */
} else if ((cur_temp >= data->ts.start_1st_throttle) &&
!(check_handle & THROTTLE_FLAG)) {
if (check_handle & WARNING_FLAG) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle &= ~(WARNING_FLAG);
}
exynos_cpufreq_upper_limit(DVFS_LOCK_ID_TMU,
info->cpufreq_level_1st_throttle);
check_handle |= THROTTLE_FLAG;
pr_debug("check_handle = %d\n", check_handle);
notify_change_of_tmu_state(info);
pr_info("throttling: set cpufreq upper limit.\n");
/* 3. change state: normal */
} else if ((cur_temp <= data->ts.stop_1st_throttle)
&& (trend < 0)) {
info->tmu_state = TMU_STATUS_NORMAL;
pr_info("change state: 1st throttle->normal.\n");
}
break;
case TMU_STATUS_WARNING:
/* 1. change state: tripping */
if (cur_temp >= data->ts.start_tripping) {
info->tmu_state = TMU_STATUS_TRIPPED;
pr_info("change state: 2nd throttle->trip\n");
#if defined(CONFIG_TC_VOLTAGE)
/* check whether temp compesation need or not */
} else if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
else
info->tmu_state = TMU_STATUS_TC;
#endif
/* 2. cpufreq limitation and uevent */
} else if ((cur_temp >= data->ts.start_2nd_throttle) &&
!(check_handle & WARNING_FLAG)) {
if (check_handle & THROTTLE_FLAG) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle &= ~(THROTTLE_FLAG);
}
exynos_cpufreq_upper_limit(DVFS_LOCK_ID_TMU,
info->cpufreq_level_2nd_throttle);
check_handle |= WARNING_FLAG;
pr_debug("check_handle = %d\n", check_handle);
notify_change_of_tmu_state(info);
pr_info("2nd throttle: cpufreq is limited.\n");
/* 3. change state: 1st-throttling */
} else if ((cur_temp <= data->ts.stop_2nd_throttle)
&& (trend < 0)) {
info->tmu_state = TMU_STATUS_THROTTLED;
pr_info("change state: 2nd throttle->1st throttle, "
"and release cpufreq upper limit.\n");
}
break;
case TMU_STATUS_TRIPPED:
/* 1. call uevent to shut-down */
if ((cur_temp >= data->ts.start_tripping) &&
(trend > 0) && !(check_handle & TRIPPING_FLAG)) {
notify_change_of_tmu_state(info);
pr_info("tripping: on waiting shutdown.\n");
check_handle |= TRIPPING_FLAG;
pr_debug("check_handle = %d\n", check_handle);
#if defined(CONFIG_TC_VOLTAGE)
/* check whether temp compesation need or not */
} else if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
else
info->tmu_state = TMU_STATUS_TC;
#endif
/* 2. change state: 2nd-throttling or warning */
} else if ((cur_temp <= data->ts.stop_2nd_throttle)
&& (trend < 0)) {
info->tmu_state = TMU_STATUS_WARNING;
pr_info("change state: trip->2nd throttle, "
"Check! occured only test mode.\n");
}
/* 3. chip protection: kernel panic as SW workaround */
if ((cur_temp >= data->ts.start_emergency) && (trend > 0)) {
panic("Emergency!!!! tripping is not treated!\n");
/* clear to prevent from interfupt by peindig bit */
__raw_writel(INTCLEARALL,
info->tmu_state + EXYNOS4_TMU_INTCLEAR);
enable_irq(info->irq);
mutex_unlock(&tmu_lock);
return;
}
break;
case TMU_STATUS_INIT:
/* sned tmu initial status to platform */
disable_irq(info->irq);
if (cur_temp >= data->ts.start_tripping)
info->tmu_state = TMU_STATUS_TRIPPED;
#if defined(CONFIG_TC_VOLTAGE)
/* check whether temp compesation need or not */
else if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
else
info->tmu_state = TMU_STATUS_TC;
}
#endif
else if (cur_temp >= data->ts.start_2nd_throttle)
info->tmu_state = TMU_STATUS_WARNING;
else if (cur_temp >= data->ts.start_1st_throttle)
info->tmu_state = TMU_STATUS_THROTTLED;
else if (cur_temp <= data->ts.stop_1st_throttle)
info->tmu_state = TMU_STATUS_NORMAL;
notify_change_of_tmu_state(info);
pr_info("%s: inform to init state to platform.\n", __func__);
break;
default:
pr_warn("Bug: checked tmu_state.\n");
if (cur_temp >= data->ts.start_tripping)
info->tmu_state = TMU_STATUS_TRIPPED;
#if defined(CONFIG_TC_VOLTAGE)
/* check whether temp compesation need or not */
else if (cur_temp <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
else
info->tmu_state = TMU_STATUS_TC;
}
#endif
else
info->tmu_state = TMU_STATUS_WARNING;
break;
} /* end */
info->last_temperature = cur_temp;
/* reschedule the next work */
queue_delayed_work_on(0, tmu_monitor_wq, &info->polling,
info->sampling_rate);
mutex_unlock(&tmu_lock);
return;
}
static irqreturn_t exynos4x12_tmu_irq_handler(int irq, void *id)
{
struct s5p_tmu_info *info = id;
unsigned int status;
disable_irq_nosync(irq);
status = __raw_readl(info->tmu_base + EXYNOS4_TMU_INTSTAT) & 0x1FFFF;
pr_info("EXYNOS4x12_tmu interrupt: INTSTAT = 0x%08x\n", status);
/* To handle multiple interrupt pending,
* interrupt by high temperature are serviced with priority.
*/
#if defined(CONFIG_TC_VOLTAGE)
if (status & INTSTAT_FALL0) {
info->tmu_state = TMU_STATUS_TC;
__raw_writel(INTCLEARALL, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
exynos_interrupt_enable(info, 0);
} else if (status & INTSTAT_RISE2) {
info->tmu_state = TMU_STATUS_TRIPPED;
__raw_writel(INTCLEAR_RISE2, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
#else
if (status & INTSTAT_RISE2) {
info->tmu_state = TMU_STATUS_TRIPPED;
__raw_writel(INTCLEAR_RISE2, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
#endif
} else if (status & INTSTAT_RISE1) {
info->tmu_state = TMU_STATUS_WARNING;
__raw_writel(INTCLEAR_RISE1, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
} else if (status & INTSTAT_RISE0) {
info->tmu_state = TMU_STATUS_THROTTLED;
__raw_writel(INTCLEAR_RISE0, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
} else {
pr_err("%s: interrupt error\n", __func__);
__raw_writel(INTCLEARALL, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
queue_delayed_work_on(0, tmu_monitor_wq,
&info->polling, info->sampling_rate / 2);
return -ENODEV;
}
/* read current temperature & save */
info->last_temperature = get_curr_temp(info);
queue_delayed_work_on(0, tmu_monitor_wq, &info->polling,
info->sampling_rate);
return IRQ_HANDLED;
}
static irqreturn_t exynos4210_tmu_irq_handler(int irq, void *id)
{
struct s5p_tmu_info *info = id;
unsigned int status;
disable_irq_nosync(irq);
status = __raw_readl(info->tmu_base + EXYNOS4_TMU_INTSTAT);
pr_info("EXYNOS4212_tmu interrupt: INTSTAT = 0x%08x\n", status);
/* To handle multiple interrupt pending,
* interrupt by high temperature are serviced with priority.
*/
if (status & TMU_INTSTAT2) {
info->tmu_state = TMU_STATUS_TRIPPED;
__raw_writel(INTCLEAR2, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
} else if (status & TMU_INTSTAT1) {
info->tmu_state = TMU_STATUS_WARNING;
__raw_writel(INTCLEAR1, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
} else if (status & TMU_INTSTAT0) {
info->tmu_state = TMU_STATUS_THROTTLED;
__raw_writel(INTCLEAR0, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
} else {
pr_err("%s: interrupt error\n", __func__);
__raw_writel(INTCLEARALL, info->tmu_base + EXYNOS4_TMU_INTCLEAR);
queue_delayed_work_on(0, tmu_monitor_wq,
&info->polling, info->sampling_rate / 2);
return -ENODEV;
}
/* read current temperature & save */
info->last_temperature = get_curr_temp(info);
queue_delayed_work_on(0, tmu_monitor_wq, &info->polling,
info->sampling_rate);
return IRQ_HANDLED;
}
#ifdef CONFIG_TMU_SYSFS
static ssize_t s5p_tmu_show_curr_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct s5p_tmu_info *info = dev_get_drvdata(dev);
unsigned int curr_temp;
curr_temp = get_curr_temp(info);
curr_temp *= 10;
pr_info("curr temp = %d\n", curr_temp);
return sprintf(buf, "%d\n", curr_temp);
}
static DEVICE_ATTR(curr_temp, S_IRUGO, s5p_tmu_show_curr_temp, NULL);
#endif
static int __devinit s5p_tmu_probe(struct platform_device *pdev)
{
struct s5p_tmu_info *info;
struct s5p_platform_tmu *pdata;
struct resource *res;
unsigned int mask = (enable_mask & ENABLE_DBGMASK);
int ret = 0;
pr_debug("%s: probe=%p\n", __func__, pdev);
info = kzalloc(sizeof(struct s5p_tmu_info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "failed to alloc memory!\n");
ret = -ENOMEM;
goto err_nomem;
}
platform_set_drvdata(pdev, info);
info->dev = &pdev->dev;
info->tmu_state = TMU_STATUS_INIT;
/* set cpufreq limit level at 1st_throttle & 2nd throttle */
pdata = info->dev->platform_data;
if (pdata->cpufreq.limit_1st_throttle)
exynos_cpufreq_get_level(pdata->cpufreq.limit_1st_throttle,
&info->cpufreq_level_1st_throttle);
if (pdata->cpufreq.limit_2nd_throttle)
exynos_cpufreq_get_level(pdata->cpufreq.limit_2nd_throttle,
&info->cpufreq_level_2nd_throttle);
pr_info("@@@ %s: cpufreq_limit: 1st_throttle: %u, 2nd_throttle = %u\n",
__func__, info->cpufreq_level_1st_throttle,
info->cpufreq_level_2nd_throttle);
#if defined(CONFIG_TC_VOLTAGE) /* Temperature compensated voltage */
if (exynos_find_cpufreq_level_by_volt(pdata->temp_compensate.arm_volt,
&info->cpulevel_tc) < 0) {
dev_err(&pdev->dev, "cpufreq_get_level error\n");
ret = -EINVAL;
goto err_nores;
}
#ifdef CONFIG_BUSFREQ_OPP
/* To lock bus frequency in OPP mode */
info->bus_dev = dev_get("exynos-busfreq");
if (info->bus_dev < 0) {
dev_err(&pdev->dev, "Failed to get_dev\n");
ret = -EINVAL;
goto err_nores;
}
if (exynos4x12_find_busfreq_by_volt(pdata->temp_compensate.bus_volt,
&info->busfreq_tc)) {
dev_err(&pdev->dev, "get_busfreq_value error\n");
ret = -EINVAL;
goto err_nores;
}
#endif
pr_info("%s: cpufreq_level[%u], busfreq_value[%u]\n",
__func__, info->cpulevel_tc, info->busfreq_tc);
#endif
/* Map auto_refresh_rate of normal & tq0 mode */
info->auto_refresh_tq0 =
get_refresh_interval(FREQ_IN_PLL, AUTO_REFRESH_PERIOD_TQ0);
info->auto_refresh_normal =
get_refresh_interval(FREQ_IN_PLL, AUTO_REFRESH_PERIOD_NORMAL);
/* To poll current temp, set sampling rate to ONE second sampling */
info->sampling_rate = usecs_to_jiffies(1000 * 1000);
/* 10sec monitroing */
info->monitor_period = usecs_to_jiffies(10000 * 1000);
/* support test mode */
if (mask & ENABLE_TEST_MODE)
set_temperature_params(info);
else
print_temperature_params(info);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get memory region resource\n");
ret = -ENODEV;
goto err_nores;
}
info->ioarea = request_mem_region(res->start,
res->end-res->start + 1, pdev->name);
if (!(info->ioarea)) {
dev_err(&pdev->dev, "failed to reserve memory region\n");
ret = -EBUSY;
goto err_nores;
}
info->tmu_base = ioremap(res->start, (res->end - res->start) + 1);
if (!(info->tmu_base)) {
dev_err(&pdev->dev, "failed ioremap()\n");
ret = -ENOMEM;
goto err_nomap;
}
tmu_monitor_wq = create_freezable_workqueue(dev_name(&pdev->dev));
if (!tmu_monitor_wq) {
pr_info("Creation of tmu_monitor_wq failed\n");
ret = -ENOMEM;
goto err_wq;
}
/* To support periodic temprature monitoring */
if (mask & ENABLE_TEMP_MON) {
INIT_DELAYED_WORK_DEFERRABLE(&info->monitor,
exynos4_poll_cur_temp);
queue_delayed_work_on(0, tmu_monitor_wq, &info->monitor,
info->monitor_period);
}
INIT_DELAYED_WORK_DEFERRABLE(&info->polling, exynos4_handler_tmu_state);
info->irq = platform_get_irq(pdev, 0);
if (info->irq < 0) {
dev_err(&pdev->dev, "no irq for thermal %d\n", info->irq);
ret = -EINVAL;
goto err_irq;
}
if (soc_is_exynos4210())
ret = request_irq(info->irq, exynos4210_tmu_irq_handler,
IRQF_DISABLED, "s5p-tmu interrupt", info);
else
ret = request_irq(info->irq, exynos4x12_tmu_irq_handler,
IRQF_DISABLED, "s5p-tmu interrupt", info);
if (ret) {
dev_err(&pdev->dev, "request_irq is failed. %d\n", ret);
goto err_irq;
}
ret = device_create_file(&pdev->dev, &dev_attr_temperature);
if (ret != 0) {
pr_err("Failed to create temperatue file: %d\n", ret);
goto err_sysfs_file1;
}
ret = device_create_file(&pdev->dev, &dev_attr_tmu_state);
if (ret != 0) {
pr_err("Failed to create tmu_state file: %d\n", ret);
goto err_sysfs_file2;
}
ret = device_create_file(&pdev->dev, &dev_attr_lot_id);
if (ret != 0) {
pr_err("Failed to create lot id file: %d\n", ret);
goto err_sysfs_file3;
}
ret = tmu_initialize(pdev);
if (ret)
goto err_init;
#ifdef CONFIG_TMU_SYSFS
ret = device_create_file(&pdev->dev, &dev_attr_curr_temp);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to create sysfs group\n");
goto err_init;
}
#endif
#ifdef CONFIG_TMU_DEBUG
ret = device_create_file(&pdev->dev, &dev_attr_print_state);
if (ret) {
dev_err(&pdev->dev, "Failed to create tmu sysfs group\n\n");
return ret;
}
#endif
#if defined(CONFIG_TC_VOLTAGE)
/* s/w workaround for fast service when interrupt is not occured,
* such as current temp is lower than tc interrupt temperature
* or current temp is continuosly increased.
*/
if (get_curr_temp(info) <= pdata->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
}
#if defined(CONFIG_VIDEO_MALI400MP)
if (mali_voltage_lock_init())
pr_err("Failed to initialize mail voltage lock.\n");
#endif
#endif
/* initialize tmu_state */
queue_delayed_work_on(0, tmu_monitor_wq, &info->polling,
info->sampling_rate);
return ret;
err_init:
device_remove_file(&pdev->dev, &dev_attr_lot_id);
err_sysfs_file3:
device_remove_file(&pdev->dev, &dev_attr_tmu_state);
err_sysfs_file2:
device_remove_file(&pdev->dev, &dev_attr_temperature);
err_sysfs_file1:
if (info->irq >= 0)
free_irq(info->irq, info);
err_irq:
destroy_workqueue(tmu_monitor_wq);
err_wq:
iounmap(info->tmu_base);
err_nomap:
release_resource(info->ioarea);
kfree(info->ioarea);
err_nores:
kfree(info);
info = NULL;
err_nomem:
dev_err(&pdev->dev, "initialization failed.\n");
return ret;
}
static int __devinit s5p_tmu_remove(struct platform_device *pdev)
{
struct s5p_tmu_info *info = platform_get_drvdata(pdev);
cancel_delayed_work(&info->polling);
destroy_workqueue(tmu_monitor_wq);
device_remove_file(&pdev->dev, &dev_attr_temperature);
device_remove_file(&pdev->dev, &dev_attr_tmu_state);
if (info->irq >= 0)
free_irq(info->irq, info);
iounmap(info->tmu_base);
release_resource(info->ioarea);
kfree(info->ioarea);
kfree(info);
info = NULL;
pr_info("%s is removed\n", dev_name(&pdev->dev));
return 0;
}
#ifdef CONFIG_PM
static int s5p_tmu_suspend(struct platform_device *pdev, pm_message_t state)
{
struct s5p_tmu_info *info = platform_get_drvdata(pdev);
if (!info)
return -EAGAIN;
/* save register value */
info->reg_save[0] = __raw_readl(info->tmu_base + EXYNOS4_TMU_CONTROL);
info->reg_save[1] = __raw_readl(info->tmu_base + EXYNOS4_TMU_SAMPLING_INTERNAL);
info->reg_save[2] = __raw_readl(info->tmu_base + EXYNOS4_TMU_COUNTER_VALUE0);
info->reg_save[3] = __raw_readl(info->tmu_base + EXYNOS4_TMU_COUNTER_VALUE1);
info->reg_save[4] = __raw_readl(info->tmu_base + EXYNOS4_TMU_INTEN);
if (soc_is_exynos4210()) {
info->reg_save[5] =
__raw_readl(info->tmu_base + EXYNOS4210_TMU_THRESHOLD_TEMP);
info->reg_save[6] =
__raw_readl(info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL0);
info->reg_save[7] =
__raw_readl(info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL1);
info->reg_save[8] =
__raw_readl(info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL2);
info->reg_save[9] =
__raw_readl(info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL3);
} else {
info->reg_save[5] =
__raw_readl(info->tmu_base + EXYNOS4x12_TMU_TRESHOLD_TEMP_RISE);
#if defined(CONFIG_TC_VOLTAGE)
info->reg_save[6] = __raw_readl(info->tmu_base
+ EXYNOS4x12_TMU_TRESHOLD_TEMP_FALL);
#endif
}
disable_irq(info->irq);
return 0;
}
static int s5p_tmu_resume(struct platform_device *pdev)
{
struct s5p_tmu_info *info = platform_get_drvdata(pdev);
struct s5p_platform_tmu *data;
if (!info || !(info->dev))
return -EAGAIN;
data = info->dev->platform_data;
/* restore tmu register value */
__raw_writel(info->reg_save[0], info->tmu_base + EXYNOS4_TMU_CONTROL);
__raw_writel(info->reg_save[1],
info->tmu_base + EXYNOS4_TMU_SAMPLING_INTERNAL);
__raw_writel(info->reg_save[2],
info->tmu_base + EXYNOS4_TMU_COUNTER_VALUE0);
__raw_writel(info->reg_save[3],
info->tmu_base + EXYNOS4_TMU_COUNTER_VALUE1);
if (soc_is_exynos4210()) {
__raw_writel(info->reg_save[5],
info->tmu_base + EXYNOS4210_TMU_THRESHOLD_TEMP);
__raw_writel(info->reg_save[6],
info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL0);
__raw_writel(info->reg_save[7],
info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL1);
__raw_writel(info->reg_save[8],
info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL2);
__raw_writel(info->reg_save[9],
info->tmu_base + EXYNOS4210_TMU_TRIG_LEVEL3);
} else {
__raw_writel(info->reg_save[5],
info->tmu_base + EXYNOS4x12_TMU_TRESHOLD_TEMP_RISE);
#if defined(CONFIG_TC_VOLTAGE)
__raw_writel(info->reg_save[6],
info->tmu_base + EXYNOS4x12_TMU_TRESHOLD_TEMP_FALL);
#endif
}
__raw_writel(info->reg_save[4],
info->tmu_base + EXYNOS4_TMU_INTEN);
#if defined(CONFIG_TC_VOLTAGE)
/* s/w workaround for fast service when interrupt is not occured,
* such as current temp is lower than tc interrupt temperature
* or current temp is continuosly increased..
*/
mdelay(1);
if (get_curr_temp(info) <= data->ts.start_tc) {
if (exynos_tc_volt(info, 1) < 0)
pr_err("TMU: lock error!\n");
}
#endif
/* Find out tmu_state after wakeup */
queue_delayed_work_on(0, tmu_monitor_wq, &info->polling, 0);
return 0;
}
#else
#define s5p_tmu_suspend NULL
#define s5p_tmu_resume NULL
#endif
static struct platform_driver s5p_tmu_driver = {
.probe = s5p_tmu_probe,
.remove = s5p_tmu_remove,
.suspend = s5p_tmu_suspend,
.resume = s5p_tmu_resume,
.driver = {
.name = "s5p-tmu",
.owner = THIS_MODULE,
},
};
static int __init s5p_tmu_driver_init(void)
{
return platform_driver_register(&s5p_tmu_driver);
}
static void __exit s5p_tmu_driver_exit(void)
{
platform_driver_unregister(&s5p_tmu_driver);
}
static void exynos4_handler_tmu_state(struct work_struct *work)
{
struct delayed_work *delayed_work = to_delayed_work(work);
struct s5p_tmu_info *info =
container_of(delayed_work, struct s5p_tmu_info, polling);
struct s5p_platform_tmu *data = info->dev->platform_data;
unsigned int cur_temp;
static int auto_refresh_changed;
static int check_handle;
int trend = 0;
mutex_lock(&tmu_lock);
cur_temp = get_curr_temp(info);
trend = cur_temp - info->last_temperature;
pr_debug("curr_temp = %d, temp_diff = %d\n", cur_temp, trend);
switch (info->tmu_state) {
case TMU_STATUS_TC:
#if defined(CONFIG_TC_VOLTAGE)
if (cur_temp >= data->ts.stop_tc) {
if (check_handle & TC_VOLTAGE_FLAG) {
exynos_cpufreq_lock_free(DVFS_LOCK_ID_TMU);
#ifdef CONFIG_BUSFREQ_OPP
if (dev_unlock(info->bus_dev, info->dev))
pr_err("TMU: dev_unlock error!\n");
#endif
if (mali_voltage_lock_pop() < 0)
pr_err("TMU: g3d_pop error\n");
check_handle &= ~(TC_VOLTAGE_FLAG);
pr_info("change state: tc -> normal.\n");
}
info->tmu_state = TMU_STATUS_NORMAL;
} else if (cur_temp <= data->ts.start_tc) {
if (!(check_handle & TC_VOLTAGE_FLAG)) {
if (exynos_cpufreq_lock(DVFS_LOCK_ID_TMU,
info->cpulevel_tc) < 0)
pr_err("TMU: cpu_lock error!\n");
#ifdef CONFIG_BUSFREQ_OPP
if (dev_lock(info->bus_dev, info->dev,
info->busfreq_tc) < 0)
pr_err("TMU: bus_lock error\n");
#endif
if (mali_voltage_lock_push(data->temp_compensate.g3d_volt) < 0)
pr_err("TMU: g3d_push error [%u] uV\n",
data->temp_compensate.g3d_volt);
check_handle |= TC_VOLTAGE_FLAG;
}
}
#endif
break;
case TMU_STATUS_NORMAL:
/* 1. change state: 1st-throttling */
if (cur_temp >= data->ts.start_1st_throttle) {
info->tmu_state = TMU_STATUS_THROTTLED;
pr_info("change state: normal->throttle.\n");
/* 2. polling end and uevent */
#if defined(CONFIG_TC_VOLTAGE)
} else if ((cur_temp <= data->ts.stop_1st_throttle)
&& (cur_temp >= data->ts.stop_tc)
&& (cur_temp <= data->ts.stop_mem_throttle)) {
#else
} else if ((cur_temp <= data->ts.stop_1st_throttle)
&& (cur_temp <= data->ts.stop_mem_throttle)) {
#endif
if (check_handle & THROTTLE_FLAG) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle &= ~(THROTTLE_FLAG);
}
pr_debug("check_handle = %d\n", check_handle);
notify_change_of_tmu_state(info);
pr_info("normal: free cpufreq_limit & interrupt enable.\n");
/* clear to prevent from interfupt by peindig bit */
__raw_writel(INTCLEARALL,
info->tmu_base + EXYNOS4_TMU_INTCLEAR);
exynos_interrupt_enable(info, 1);
enable_irq(info->irq);
mutex_unlock(&tmu_lock);
return;
}
break;
case TMU_STATUS_THROTTLED:
/* 1. change state: 2nd-throttling or warning */
if (cur_temp >= data->ts.start_2nd_throttle) {
info->tmu_state = TMU_STATUS_WARNING;
pr_info("change state: 1st throttle->2nd throttle.\n");
/* 2. cpufreq limitation and uevent */
} else if ((cur_temp >= data->ts.start_1st_throttle) &&
!(check_handle & THROTTLE_FLAG)) {
if (check_handle & WARNING_FLAG) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle &= ~(WARNING_FLAG);
}
exynos_cpufreq_upper_limit(DVFS_LOCK_ID_TMU,
info->cpufreq_level_1st_throttle);
check_handle |= THROTTLE_FLAG;
pr_debug("check_handle = %d\n", check_handle);
notify_change_of_tmu_state(info);
pr_info("throttling: set cpufreq upper limit.\n");
/* 3. change state: normal */
} else if ((cur_temp <= data->ts.stop_1st_throttle)
&& (trend < 0)) {
info->tmu_state = TMU_STATUS_NORMAL;
pr_info("change state: 1st throttle->normal.\n");
}
break;
case TMU_STATUS_WARNING:
/* 1. change state: tripping */
if (cur_temp >= data->ts.start_tripping) {
info->tmu_state = TMU_STATUS_TRIPPED;
pr_info("change state: 2nd throttle->trip\n");
/* 2. cpufreq limitation and uevent */
} else if ((cur_temp >= data->ts.start_2nd_throttle) &&
!(check_handle & WARNING_FLAG)) {
if (check_handle & THROTTLE_FLAG) {
exynos_cpufreq_upper_limit_free(DVFS_LOCK_ID_TMU);
check_handle &= ~(THROTTLE_FLAG);
}
exynos_cpufreq_upper_limit(DVFS_LOCK_ID_TMU,
info->cpufreq_level_2nd_throttle);
check_handle |= WARNING_FLAG;
pr_debug("check_handle = %d\n", check_handle);
notify_change_of_tmu_state(info);
pr_info("2nd throttle: cpufreq is limited.\n");
/* 3. change state: 1st-throttling */
} else if ((cur_temp <= data->ts.stop_2nd_throttle)
&& (trend < 0)) {
info->tmu_state = TMU_STATUS_THROTTLED;
pr_info("change state: 2nd throttle->1st throttle, "
"and release cpufreq upper limit.\n");
}
break;
case TMU_STATUS_TRIPPED:
/* 1. call uevent to shut-down */
if ((cur_temp >= data->ts.start_tripping) &&
(trend > 0) && !(check_handle & TRIPPING_FLAG)) {
notify_change_of_tmu_state(info);
pr_info("tripping: on waiting shutdown.\n");
check_handle |= TRIPPING_FLAG;
pr_debug("check_handle = %d\n", check_handle);
/* 2. change state: 2nd-throttling or warning */
} else if ((cur_temp <= data->ts.stop_2nd_throttle)
&& (trend < 0)) {
info->tmu_state = TMU_STATUS_WARNING;
pr_info("change state: trip->2nd throttle, "
"Check! occured only test mode.\n");
}
/* 3. chip protection: kernel panic as SW workaround */
if ((cur_temp >= data->ts.start_emergency) && (trend > 0)) {
panic("Emergency!!!! tripping is not treated!\n");
/* clear to prevent from interfupt by peindig bit */
__raw_writel(INTCLEARALL,
info->tmu_state + EXYNOS4_TMU_INTCLEAR);
enable_irq(info->irq);
mutex_unlock(&tmu_lock);
return;
}
break;
case TMU_STATUS_INIT:
/* sned tmu initial status to platform */
disable_irq(info->irq);
if (cur_temp >= data->ts.start_tripping)
info->tmu_state = TMU_STATUS_TRIPPED;
#if defined(CONFIG_TC_VOLTAGE)
else if (cur_temp >= data->ts.start_tc)
info->tmu_state = TMU_STATUS_TC;
#endif
else if (cur_temp >= data->ts.start_2nd_throttle)
info->tmu_state = TMU_STATUS_WARNING;
else if (cur_temp >= data->ts.start_1st_throttle)
info->tmu_state = TMU_STATUS_THROTTLED;
else if (cur_temp <= data->ts.stop_1st_throttle)
info->tmu_state = TMU_STATUS_NORMAL;
notify_change_of_tmu_state(info);
pr_info("%s: inform to init state to platform.\n", __func__);
break;
default:
pr_warn("Bug: checked tmu_state.\n");
if (cur_temp >= data->ts.start_tripping)
info->tmu_state = TMU_STATUS_TRIPPED;
else
info->tmu_state = TMU_STATUS_WARNING;
break;
} /* end */
/* memory throttling */
if (cur_temp >= data->ts.start_mem_throttle) {
if (!(auto_refresh_changed) && (trend > 0)) {
pr_info("set auto_refresh 1.95us\n");
set_refresh_rate(info->auto_refresh_tq0);
auto_refresh_changed = 1;
}
} else if (cur_temp <= (data->ts.stop_mem_throttle)) {
if ((auto_refresh_changed) && (trend < 0)) {
pr_info("set auto_refresh 3.9us\n");
set_refresh_rate(info->auto_refresh_normal);
auto_refresh_changed = 0;
}
}
info->last_temperature = cur_temp;
/* reschedule the next work */
queue_delayed_work_on(0, tmu_monitor_wq, &info->polling,
info->sampling_rate);
mutex_unlock(&tmu_lock);
return;
}
