static int tenxpress_phy_reconfigure(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
bool phy_mode_change, loop_reset;
if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
phy_data->phy_mode = efx->phy_mode;
return 0;
}
phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
phy_data->phy_mode != PHY_MODE_NORMAL);
loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) ||
LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
if (loop_reset || phy_mode_change) {
tenxpress_special_reset(efx);
falcon_reset_xaui(efx);
}
tenxpress_low_power(efx);
efx_mdio_transmit_disable(efx);
efx_mdio_phy_reconfigure(efx);
tenxpress_ext_loopback(efx);
efx_mdio_an_reconfigure(efx);
phy_data->loopback_mode = efx->loopback_mode;
phy_data->phy_mode = efx->phy_mode;
return 0;
}
int falcon_init_xmac(struct efx_nic *efx)
{
int rc;
/* Initialize the PHY first so the clock is around */
rc = efx->phy_op->init(efx);
if (rc)
goto fail1;
rc = falcon_reset_xaui(efx);
if (rc)
goto fail2;
/* Wait again. Give the PHY and MAC time to come back */
schedule_timeout_uninterruptible(HZ / 10);
rc = falcon_reset_xmac(efx);
if (rc)
goto fail2;
falcon_mask_status_intr(efx, true);
return 0;
fail2:
efx->phy_op->fini(efx);
fail1:
return rc;
}
static int tenxpress_phy_init(struct efx_nic *efx)
{
int rc;
falcon_board(efx)->type->init_phy(efx);
if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
return rc;
rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
return rc;
}
rc = tenxpress_init(efx);
if (rc < 0)
return rc;
/* Reinitialise flow control settings */
efx_link_set_wanted_fc(efx, efx->wanted_fc);
efx_mdio_an_reconfigure(efx);
schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
/* Let XGXS and SerDes out of reset */
falcon_reset_xaui(efx);
return 0;
}
/* Try and bring the Falcon side of the Falcon-Phy XAUI link fails
* to come back up. Bash it until it comes back up */
static bool falcon_check_xaui_link_up(struct efx_nic *efx)
{
int max_tries, tries;
tries = EFX_WORKAROUND_5147(efx) ? 5 : 1;
max_tries = tries;
if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
(efx->phy_type == PHY_TYPE_NONE) ||
efx_phy_mode_disabled(efx->phy_mode))
return false;
while (tries) {
if (falcon_xaui_link_ok(efx))
return true;
EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
__func__, tries);
falcon_reset_xaui(efx);
udelay(200);
tries--;
}
EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n",
max_tries);
return false;
}
static int txc43128_phy_reconfigure(struct efx_nic *efx)
{
struct txc43128_data *phy_data = efx->phy_data;
enum efx_phy_mode mode_change = efx->phy_mode ^ phy_data->phy_mode;
bool loop_change = LOOPBACK_CHANGED(phy_data, efx, TXC_LOOPBACKS);
if (efx->phy_mode & mode_change & PHY_MODE_TX_DISABLED) {
txc_reset_phy(efx);
txc_apply_defaults(efx);
falcon_reset_xaui(efx);
mode_change &= ~PHY_MODE_TX_DISABLED;
}
efx_mdio_transmit_disable(efx);
efx_mdio_phy_reconfigure(efx);
if (mode_change & PHY_MODE_LOW_POWER)
txc_set_power(efx);
/* The data sheet claims this is required after every reconfiguration
* (note at end of 7.1), but we mustn't do it when nothing changes as
* it glitches the link, and reconfigure gets called on link change,
* so we get an IRQ storm on link up. */
if (loop_change || mode_change)
txc_reset_logic(efx);
phy_data->phy_mode = efx->phy_mode;
phy_data->loopback_mode = efx->loopback_mode;
return 0;
}
static int tenxpress_phy_init(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data;
int rc = 0;
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
phy_data->phy_mode = efx->phy_mode;
if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
if (efx->phy_type == PHY_TYPE_SFT9001A) {
int reg;
reg = mdio_clause45_read(efx, efx->mii.phy_id,
MDIO_MMD_PMAPMD,
PMA_PMD_XCONTROL_REG);
reg |= (1 << PMA_PMD_EXT_SSR_LBN);
mdio_clause45_write(efx, efx->mii.phy_id,
MDIO_MMD_PMAPMD,
PMA_PMD_XCONTROL_REG, reg);
mdelay(200);
}
rc = mdio_clause45_wait_reset_mmds(efx,
TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
goto fail;
rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
goto fail;
}
rc = tenxpress_init(efx);
if (rc < 0)
goto fail;
mdio_clause45_set_pause(efx);
if (efx->phy_type == PHY_TYPE_SFT9001B) {
rc = device_create_file(&efx->pci_dev->dev,
&dev_attr_phy_short_reach);
if (rc)
goto fail;
}
schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
/* Let XGXS and SerDes out of reset */
falcon_reset_xaui(efx);
return 0;
fail:
kfree(efx->phy_data);
efx->phy_data = NULL;
return rc;
}
static void tenxpress_phy_reconfigure(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
struct ethtool_cmd ecmd;
bool phy_mode_change, loop_reset;
if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
phy_data->phy_mode = efx->phy_mode;
return;
}
tenxpress_low_power(efx);
phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
phy_data->phy_mode != PHY_MODE_NORMAL);
loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
if (loop_reset || phy_mode_change) {
int rc;
efx->phy_op->get_settings(efx, &ecmd);
if (loop_reset || phy_mode_change) {
tenxpress_special_reset(efx);
/* Reset XAUI if we were in 10G, and are staying
* in 10G. If we're moving into and out of 10G
* then xaui will be reset anyway */
if (EFX_IS10G(efx))
falcon_reset_xaui(efx);
}
rc = efx->phy_op->set_settings(efx, &ecmd);
WARN_ON(rc);
}
mdio_clause45_transmit_disable(efx);
mdio_clause45_phy_reconfigure(efx);
tenxpress_ext_loopback(efx);
phy_data->loopback_mode = efx->loopback_mode;
phy_data->phy_mode = efx->phy_mode;
if (efx->phy_type == PHY_TYPE_SFX7101) {
efx->link_speed = 10000;
efx->link_fd = true;
efx->link_up = sfx7101_link_ok(efx);
} else {
efx->phy_op->get_settings(efx, &ecmd);
efx->link_speed = ecmd.speed;
efx->link_fd = ecmd.duplex == DUPLEX_FULL;
efx->link_up = sft9001_link_ok(efx, &ecmd);
}
efx->link_fc = mdio_clause45_get_pause(efx);
}
static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
{
efx_oword_t reg;
bool xgxs_loopback = (efx->loopback_mode == LOOPBACK_XGXS);
bool xaui_loopback = (efx->loopback_mode == LOOPBACK_XAUI);
bool xgmii_loopback = (efx->loopback_mode == LOOPBACK_XGMII);
/* XGXS block is flaky and will need to be reset if moving
* into our out of XGMII, XGXS or XAUI loopbacks. */
if (EFX_WORKAROUND_5147(efx)) {
bool old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback;
bool reset_xgxs;
efx_reado(efx, ®, FR_AB_XX_CORE_STAT);
old_xgxs_loopback = EFX_OWORD_FIELD(reg, FRF_AB_XX_XGXS_LB_EN);
old_xgmii_loopback =
EFX_OWORD_FIELD(reg, FRF_AB_XX_XGMII_LB_EN);
efx_reado(efx, ®, FR_AB_XX_SD_CTL);
old_xaui_loopback = EFX_OWORD_FIELD(reg, FRF_AB_XX_LPBKA);
/* The PHY driver may have turned XAUI off */
reset_xgxs = ((xgxs_loopback != old_xgxs_loopback) ||
(xaui_loopback != old_xaui_loopback) ||
(xgmii_loopback != old_xgmii_loopback));
if (reset_xgxs)
falcon_reset_xaui(efx);
}
efx_reado(efx, ®, FR_AB_XX_CORE_STAT);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_FORCE_SIG,
(xgxs_loopback || xaui_loopback) ?
FFE_AB_XX_FORCE_SIG_ALL_LANES : 0);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_XGXS_LB_EN, xgxs_loopback);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_XGMII_LB_EN, xgmii_loopback);
efx_writeo(efx, ®, FR_AB_XX_CORE_STAT);
efx_reado(efx, ®, FR_AB_XX_SD_CTL);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKD, xaui_loopback);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKC, xaui_loopback);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKB, xaui_loopback);
EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKA, xaui_loopback);
efx_writeo(efx, ®, FR_AB_XX_SD_CTL);
}
static void falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
{
efx->mac_up = falcon_xaui_link_ok(efx);
if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
efx_phy_mode_disabled(efx->phy_mode))
return;
while (!efx->mac_up && tries) {
EFX_LOG(efx, "bashing xaui\n");
falcon_reset_xaui(efx);
udelay(200);
efx->mac_up = falcon_xaui_link_ok(efx);
--tries;
}
}
static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
{
efx_oword_t reg;
bool xgxs_loopback = (efx->loopback_mode == LOOPBACK_XGXS);
bool xaui_loopback = (efx->loopback_mode == LOOPBACK_XAUI);
bool xgmii_loopback = (efx->loopback_mode == LOOPBACK_XGMII);
if (EFX_WORKAROUND_5147(efx)) {
bool old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback;
bool reset_xgxs;
falcon_read(efx, ®, XX_CORE_STAT_REG);
old_xgxs_loopback = EFX_OWORD_FIELD(reg, XX_XGXS_LB_EN);
old_xgmii_loopback = EFX_OWORD_FIELD(reg, XX_XGMII_LB_EN);
falcon_read(efx, ®, XX_SD_CTL_REG);
old_xaui_loopback = EFX_OWORD_FIELD(reg, XX_LPBKA);
reset_xgxs = ((xgxs_loopback != old_xgxs_loopback) ||
(xaui_loopback != old_xaui_loopback) ||
(xgmii_loopback != old_xgmii_loopback));
if (reset_xgxs)
falcon_reset_xaui(efx);
}
falcon_read(efx, ®, XX_CORE_STAT_REG);
EFX_SET_OWORD_FIELD(reg, XX_FORCE_SIG,
(xgxs_loopback || xaui_loopback) ?
XX_FORCE_SIG_DECODE_FORCED : 0);
EFX_SET_OWORD_FIELD(reg, XX_XGXS_LB_EN, xgxs_loopback);
EFX_SET_OWORD_FIELD(reg, XX_XGMII_LB_EN, xgmii_loopback);
falcon_write(efx, ®, XX_CORE_STAT_REG);
falcon_read(efx, ®, XX_SD_CTL_REG);
EFX_SET_OWORD_FIELD(reg, XX_LPBKD, xaui_loopback);
EFX_SET_OWORD_FIELD(reg, XX_LPBKC, xaui_loopback);
EFX_SET_OWORD_FIELD(reg, XX_LPBKB, xaui_loopback);
EFX_SET_OWORD_FIELD(reg, XX_LPBKA, xaui_loopback);
falcon_write(efx, ®, XX_SD_CTL_REG);
}
static int tenxpress_phy_init(struct efx_nic *efx)
{
int rc;
falcon_board(efx)->type->init_phy(efx);
if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
if (efx->phy_type == PHY_TYPE_SFT9001A) {
int reg;
reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
PMA_PMD_XCONTROL_REG);
reg |= (1 << PMA_PMD_EXT_SSR_LBN);
efx_mdio_write(efx, MDIO_MMD_PMAPMD,
PMA_PMD_XCONTROL_REG, reg);
mdelay(200);
}
rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
if (rc < 0)
return rc;
rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
return rc;
}
rc = tenxpress_init(efx);
if (rc < 0)
return rc;
/* Reinitialise flow control settings */
efx_link_set_wanted_fc(efx, efx->wanted_fc);
efx_mdio_an_reconfigure(efx);
schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
/* Let XGXS and SerDes out of reset */
falcon_reset_xaui(efx);
return 0;
}
int falcon_check_xmac(struct efx_nic *efx)
{
bool xaui_link_ok;
int rc;
if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
efx_phy_mode_disabled(efx->phy_mode))
return 0;
falcon_mask_status_intr(efx, false);
xaui_link_ok = falcon_xaui_link_ok(efx);
if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
falcon_reset_xaui(efx);
/* Call the PHY check_hw routine */
rc = efx->phy_op->check_hw(efx);
/* Unmask interrupt if everything was (and still is) ok */
if (xaui_link_ok && efx->link_up)
falcon_mask_status_intr(efx, true);
return rc;
}
/* Try to bring up the Falcon side of the Falcon-Phy XAUI link */
static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries)
{
bool mac_up = falcon_xmac_link_ok(efx);
if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS ||
efx_phy_mode_disabled(efx->phy_mode))
/* XAUI link is expected to be down */
return mac_up;
falcon_stop_nic_stats(efx);
while (!mac_up && tries) {
EFX_LOG(efx, "bashing xaui\n");
falcon_reset_xaui(efx);
udelay(200);
mac_up = falcon_xmac_link_ok(efx);
--tries;
}
falcon_start_nic_stats(efx);
return mac_up;
}
static int tenxpress_phy_reconfigure(struct efx_nic *efx)
{
struct tenxpress_phy_data *phy_data = efx->phy_data;
bool phy_mode_change, loop_reset;
if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
phy_data->phy_mode = efx->phy_mode;
return 0;
}
phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
phy_data->phy_mode != PHY_MODE_NORMAL);
loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) ||
LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
if (loop_reset || phy_mode_change) {
tenxpress_special_reset(efx);
/* Reset XAUI if we were in 10G, and are staying
* in 10G. If we're moving into and out of 10G
* then xaui will be reset anyway */
if (EFX_IS10G(efx))
falcon_reset_xaui(efx);
}
tenxpress_low_power(efx);
efx_mdio_transmit_disable(efx);
efx_mdio_phy_reconfigure(efx);
tenxpress_ext_loopback(efx);
efx_mdio_an_reconfigure(efx);
phy_data->loopback_mode = efx->loopback_mode;
phy_data->phy_mode = efx->phy_mode;
return 0;
}
