C++ (Cpp) fdtdec_get_pci_bar32 Examples

Example #1

File: ns16550.c Project: Ga-vin/u-boot

int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
{
	struct ns16550_platdata *plat = dev->platdata;
	fdt_addr_t addr;

	/* try Processor Local Bus device first */
	addr = dev_get_addr(dev);
#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
	if (addr == FDT_ADDR_T_NONE) {
		/* then try pci device */
		struct fdt_pci_addr pci_addr;
		u32 bar;
		int ret;

		/* we prefer to use a memory-mapped register */
		ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
					  FDT_PCI_SPACE_MEM32, "reg",
					  &pci_addr);
		if (ret) {
			/* try if there is any i/o-mapped register */
			ret = fdtdec_get_pci_addr(gd->fdt_blob,
						  dev->of_offset,
						  FDT_PCI_SPACE_IO,
						  "reg", &pci_addr);
			if (ret)
				return ret;
		}

		ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar);
		if (ret)
			return ret;

		addr = bar;
	}
#endif

	if (addr == FDT_ADDR_T_NONE)
		return -EINVAL;

	plat->base = addr;
	plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
					 "reg-shift", 0);
	plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
				     "clock-frequency",
				     CONFIG_SYS_NS16550_CLK);
	if (!plat->clock) {
		debug("ns16550 clock not defined\n");
		return -EINVAL;
	}

	return 0;
}

Example #2

File: ns16550.c Project: KunYi/uboot-samx6i

int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
{
	struct ns16550_platdata *plat = dev->platdata;
	fdt_addr_t addr;

	/* try Processor Local Bus device first */
	addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
#ifdef CONFIG_PCI
	if (addr == FDT_ADDR_T_NONE) {
		/* then try pci device */
		struct fdt_pci_addr pci_addr;
		u32 bar;
		int ret;

		/* we prefer to use a memory-mapped register */
		ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
					  FDT_PCI_SPACE_MEM32, "reg",
					  &pci_addr);
		if (ret) {
			/* try if there is any i/o-mapped register */
			ret = fdtdec_get_pci_addr(gd->fdt_blob,
						  dev->of_offset,
						  FDT_PCI_SPACE_IO,
						  "reg", &pci_addr);
			if (ret)
				return ret;
		}

		ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset,
					   &pci_addr, &bar);
		if (ret)
			return ret;

		addr = bar;
	}
#endif

	if (addr == FDT_ADDR_T_NONE)
		return -EINVAL;

	plat->base = addr;
	plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
					 "reg-shift", 1);

	return 0;
}

Example #3

File: ns16550.c Project: berte/u-boot

int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
{
	struct ns16550_platdata *plat = dev->platdata;
	const u32 port_type = dev_get_driver_data(dev);
	fdt_addr_t addr;
	struct clk clk;
	int err;

	/* try Processor Local Bus device first */
	addr = dev_read_addr(dev);
#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
	if (addr == FDT_ADDR_T_NONE) {
		/* then try pci device */
		struct fdt_pci_addr pci_addr;
		u32 bar;
		int ret;

		/* we prefer to use a memory-mapped register */
		ret = fdtdec_get_pci_addr(gd->fdt_blob, dev_of_offset(dev),
					  FDT_PCI_SPACE_MEM32, "reg",
					  &pci_addr);
		if (ret) {
			/* try if there is any i/o-mapped register */
			ret = fdtdec_get_pci_addr(gd->fdt_blob,
						  dev_of_offset(dev),
						  FDT_PCI_SPACE_IO,
						  "reg", &pci_addr);
			if (ret)
				return ret;
		}

		ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar);
		if (ret)
			return ret;

		addr = bar;
	}
#endif

	if (addr == FDT_ADDR_T_NONE)
		return -EINVAL;

#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
	plat->base = addr;
#else
	plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
#endif

	plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
	plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);

	err = clk_get_by_index(dev, 0, &clk);
	if (!err) {
		err = clk_get_rate(&clk);
		if (!IS_ERR_VALUE(err))
			plat->clock = err;
	} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
		debug("ns16550 failed to get clock\n");
		return err;
	}

	if (!plat->clock)
		plat->clock = dev_read_u32_default(dev, "clock-frequency",
						   CONFIG_SYS_NS16550_CLK);
	if (!plat->clock) {
		debug("ns16550 clock not defined\n");
		return -EINVAL;
	}

	plat->fcr = UART_FCR_DEFVAL;
	if (port_type == PORT_JZ4780)
		plat->fcr |= UART_FCR_UME;

	return 0;
}