static void bt_audio_close(const void *buf, uint16_t len)
{
const struct audio_cmd_close *cmd = buf;
struct a2dp_endpoint *endpoint;
DBG("");
endpoint = find_endpoint(cmd->id);
if (!endpoint) {
error("Unable to find endpoint %u", cmd->id);
ipc_send_rsp(audio_ipc, AUDIO_SERVICE_ID, AUDIO_OP_CLOSE,
AUDIO_STATUS_FAILED);
return;
}
endpoints = g_slist_remove(endpoints, endpoint);
unregister_endpoint(endpoint);
ipc_send_rsp(audio_ipc, AUDIO_SERVICE_ID, AUDIO_OP_CLOSE,
AUDIO_STATUS_SUCCESS);
}
int API_EXPORTED libusb_get_max_packet_size(libusb_device *dev,
unsigned char endpoint)
{
struct libusb_config_descriptor *config;
const struct libusb_endpoint_descriptor *ep;
int r;
r = libusb_get_active_config_descriptor(dev, &config);
if (r < 0) {
usbi_err(DEVICE_CTX(dev),
"could not retrieve active config descriptor");
return LIBUSB_ERROR_OTHER;
}
ep = find_endpoint(config, endpoint);
if (!ep)
return LIBUSB_ERROR_NOT_FOUND;
r = ep->wMaxPacketSize;
libusb_free_config_descriptor(config);
return r;
}
/*
* epm_Insert
*
* Add the specified entries to an endpoint map.
*/
error_status_t _epm_Insert(struct pipes_struct *p,
struct epm_Insert *r)
{
TALLOC_CTX *tmp_ctx;
error_status_t rc;
NTSTATUS status;
uint32_t i;
struct dcerpc_binding *b;
struct dcesrv_endpoint *ep;
struct dcesrv_iface_list *iflist;
struct dcesrv_iface *iface;
bool add_ep;
/* If this is not a priviledged users, return */
if (p->transport != NCALRPC ||
!is_priviledged_pipe(p->session_info)) {
p->fault_state = DCERPC_FAULT_OP_RNG_ERROR;
return EPMAPPER_STATUS_CANT_PERFORM_OP;
}
tmp_ctx = talloc_stackframe();
if (tmp_ctx == NULL) {
return EPMAPPER_STATUS_NO_MEMORY;
}
DEBUG(3, ("_epm_Insert: Trying to add %u new entries.\n",
r->in.num_ents));
for (i = 0; i < r->in.num_ents; i++) {
add_ep = false;
b = NULL;
status = dcerpc_binding_from_tower(tmp_ctx,
&r->in.entries[i].tower->tower,
&b);
if (NT_STATUS_EQUAL(status, NT_STATUS_NO_MEMORY)) {
rc = EPMAPPER_STATUS_NO_MEMORY;
goto done;
}
if (!NT_STATUS_IS_OK(status)) {
rc = EPMAPPER_STATUS_CANT_PERFORM_OP;
goto done;
}
DEBUG(3, ("_epm_Insert: Adding transport %s for %s\n",
derpc_transport_string_by_transport(b->transport),
r->in.entries[i].annotation));
/* Check if the entry already exits */
ep = find_endpoint(endpoint_table, b);
if (ep == NULL) {
/* No entry found, create it */
ep = talloc_zero(NULL, struct dcesrv_endpoint);
if (ep == NULL) {
rc = EPMAPPER_STATUS_NO_MEMORY;
goto done;
}
add_ep = true;
ep->ep_description = talloc_steal(ep, b);
}
/* TODO Replace the entry if the replace flag is set */
/* Create an interface */
iface = talloc(tmp_ctx, struct dcesrv_iface);
if (iface == NULL) {
rc = EPMAPPER_STATUS_NO_MEMORY;
goto done;
}
iface->name = talloc_strdup(iface, r->in.entries[i].annotation);
if (iface->name == NULL) {
rc = EPMAPPER_STATUS_NO_MEMORY;
goto done;
}
iface->syntax_id = b->object;
/*
* Check if the rpc service is alrady registered on the
* endpoint.
*/
if (find_interface(ep, iface) != NULL) {
DEBUG(8, ("dcesrv_interface_register: interface '%s' "
"already registered on endpoint\n",
iface->name));
/* FIXME wrong error code? */
rc = EPMAPPER_STATUS_OK;
goto done;
}
/* Create an entry for the interface */
iflist = talloc(ep, struct dcesrv_iface_list);
if (iflist == NULL) {
rc = EPMAPPER_STATUS_NO_MEMORY;
goto done;
}
iflist->iface = talloc_move(iflist, &iface);
/* Finally add the interface on the endpoint */
DLIST_ADD(ep->iface_list, iflist);
/* If it's a new endpoint add it to the endpoint_table */
if (add_ep) {
DLIST_ADD(endpoint_table, ep);
}
}
int zmq::socket_base_t::connect (const char *addr_)
{
if (unlikely (ctx_terminated)) {
errno = ETERM;
return -1;
}
// Process pending commands, if any.
int rc = process_commands (0, false);
if (unlikely (rc != 0))
return -1;
// Parse addr_ string.
std::string protocol;
std::string address;
rc = parse_uri (addr_, protocol, address);
if (rc != 0)
return -1;
rc = check_protocol (protocol);
if (rc != 0)
return -1;
if (protocol == "inproc") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
endpoint_t peer = find_endpoint (addr_);
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
int sndhwm = 0;
if (peer.socket == NULL)
sndhwm = options.sndhwm;
else if (options.sndhwm != 0 && peer.options.rcvhwm != 0)
sndhwm = options.sndhwm + peer.options.rcvhwm;
int rcvhwm = 0;
if (peer.socket == NULL)
rcvhwm = options.rcvhwm;
else if (options.rcvhwm != 0 && peer.options.sndhwm != 0)
rcvhwm = options.rcvhwm + peer.options.sndhwm;
// Create a bi-directional pipe to connect the peers.
object_t *parents [2] = {this, peer.socket == NULL ? this : peer.socket};
pipe_t *new_pipes [2] = {NULL, NULL};
bool conflate = options.conflate &&
(options.type == ZMQ_DEALER ||
options.type == ZMQ_PULL ||
options.type == ZMQ_PUSH ||
options.type == ZMQ_PUB ||
options.type == ZMQ_SUB);
int hwms [2] = {conflate? -1 : sndhwm, conflate? -1 : rcvhwm};
bool conflates [2] = {conflate, conflate};
int rc = pipepair (parents, new_pipes, hwms, conflates);
errno_assert (rc == 0);
// Attach local end of the pipe to this socket object.
attach_pipe (new_pipes [0]);
if (!peer.socket) {
// The peer doesn't exist yet so we don't know whether
// to send the identity message or not. To resolve this,
// we always send our identity and drop it later if
// the peer doesn't expect it.
msg_t id;
rc = id.init_size (options.identity_size);
errno_assert (rc == 0);
memcpy (id.data (), options.identity, options.identity_size);
id.set_flags (msg_t::identity);
bool written = new_pipes [0]->write (&id);
zmq_assert (written);
new_pipes [0]->flush ();
endpoint_t endpoint = {this, options};
pending_connection_t pending_connection = {endpoint, new_pipes [0], new_pipes [1]};
pend_connection (addr_, pending_connection);
}
else
{
// If required, send the identity of the local socket to the peer.
if (peer.options.recv_identity) {
msg_t id;
rc = id.init_size (options.identity_size);
errno_assert (rc == 0);
memcpy (id.data (), options.identity, options.identity_size);
id.set_flags (msg_t::identity);
bool written = new_pipes [0]->write (&id);
zmq_assert (written);
new_pipes [0]->flush ();
}
// If required, send the identity of the peer to the local socket.
if (options.recv_identity) {
msg_t id;
rc = id.init_size (peer.options.identity_size);
errno_assert (rc == 0);
memcpy (id.data (), peer.options.identity, peer.options.identity_size);
id.set_flags (msg_t::identity);
bool written = new_pipes [1]->write (&id);
zmq_assert (written);
new_pipes [1]->flush ();
}
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
send_bind (peer.socket, new_pipes [1], false);
}
// Save last endpoint URI
last_endpoint.assign (addr_);
// remember inproc connections for disconnect
inprocs.insert (inprocs_t::value_type (std::string (addr_), new_pipes[0]));
return 0;
}
bool is_single_connect = (options.type == ZMQ_DEALER ||
options.type == ZMQ_SUB ||
options.type == ZMQ_REQ);
if (unlikely (is_single_connect)) {
endpoints_t::iterator it = endpoints.find (addr_);
if (it != endpoints.end ()) {
// There is no valid use for multiple connects for SUB-PUB nor
// DEALER-ROUTER nor REQ-REP. Multiple connects produces
// nonsensical results.
return 0;
}
}
// Choose the I/O thread to run the session in.
io_thread_t *io_thread = choose_io_thread (options.affinity);
if (!io_thread) {
errno = EMTHREAD;
return -1;
}
address_t *paddr = new (std::nothrow) address_t (protocol, address);
alloc_assert (paddr);
// Resolve address (if needed by the protocol)
if (protocol == "tcp") {
// Defer resolution until a socket is opened
paddr->resolved.tcp_addr = NULL;
}
#if !defined ZMQ_HAVE_WINDOWS && !defined ZMQ_HAVE_OPENVMS
else if (protocol == "ipc") {
paddr->resolved.ipc_addr = new (std::nothrow) ipc_address_t ();
alloc_assert (paddr->resolved.ipc_addr);
int rc = paddr->resolved.ipc_addr->resolve (address.c_str ());
if (rc != 0) {
delete paddr;
return -1;
}
}
#endif
// TBD - Should we check address for ZMQ_HAVE_NORM???
#ifdef ZMQ_HAVE_OPENPGM
if (protocol == "pgm" || protocol == "epgm") {
struct pgm_addrinfo_t *res = NULL;
uint16_t port_number = 0;
int rc = pgm_socket_t::init_address(address.c_str(), &res, &port_number);
if (res != NULL)
pgm_freeaddrinfo (res);
if (rc != 0 || port_number == 0)
return -1;
}
#endif
#if defined ZMQ_HAVE_TIPC
else if (protocol == "tipc") {
paddr->resolved.tipc_addr = new (std::nothrow) tipc_address_t ();
alloc_assert (paddr->resolved.tipc_addr);
int rc = paddr->resolved.tipc_addr->resolve (address.c_str());
if (rc != 0) {
delete paddr;
return -1;
}
}
#endif
// Create session.
session_base_t *session = session_base_t::create (io_thread, true, this,
options, paddr);
errno_assert (session);
// PGM does not support subscription forwarding; ask for all data to be
// sent to this pipe. (same for NORM, currently?)
bool subscribe_to_all = protocol == "pgm" || protocol == "epgm" || protocol == "norm";
pipe_t *newpipe = NULL;
if (options.immediate != 1 || subscribe_to_all) {
// Create a bi-directional pipe.
object_t *parents [2] = {this, session};
pipe_t *new_pipes [2] = {NULL, NULL};
bool conflate = options.conflate &&
(options.type == ZMQ_DEALER ||
options.type == ZMQ_PULL ||
options.type == ZMQ_PUSH ||
options.type == ZMQ_PUB ||
options.type == ZMQ_SUB);
int hwms [2] = {conflate? -1 : options.sndhwm,
conflate? -1 : options.rcvhwm
};
bool conflates [2] = {conflate, conflate};
rc = pipepair (parents, new_pipes, hwms, conflates);
errno_assert (rc == 0);
// Attach local end of the pipe to the socket object.
attach_pipe (new_pipes [0], subscribe_to_all);
newpipe = new_pipes [0];
// Attach remote end of the pipe to the session object later on.
session->attach_pipe (new_pipes [1]);
}
// Save last endpoint URI
paddr->to_string (last_endpoint);
add_endpoint (addr_, (own_t *) session, newpipe);
return 0;
}
int zmq::socket_base_t::connect (const char *addr_)
{
if (unlikely (ctx_terminated)) {
errno = ETERM;
return -1;
}
// Process pending commands, if any.
int rc = process_commands (0, false);
if (unlikely (rc != 0))
return -1;
// Parse addr_ string.
std::string protocol;
std::string address;
rc = parse_uri (addr_, protocol, address);
if (rc != 0)
return -1;
rc = check_protocol (protocol);
if (rc != 0)
return -1;
if (protocol == "inproc") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
endpoint_t peer = find_endpoint (addr_);
if (!peer.socket)
return -1;
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
int sndhwm;
int rcvhwm;
if (options.sndhwm == 0 || peer.options.rcvhwm == 0)
sndhwm = 0;
else
sndhwm = options.sndhwm + peer.options.rcvhwm;
if (options.rcvhwm == 0 || peer.options.sndhwm == 0)
rcvhwm = 0;
else
rcvhwm = options.rcvhwm + peer.options.sndhwm;
// Create a bi-directional pipe to connect the peers.
object_t *parents [2] = {this, peer.socket};
pipe_t *pipes [2] = {NULL, NULL};
int hwms [2] = {sndhwm, rcvhwm};
bool delays [2] = {options.delay_on_disconnect, options.delay_on_close};
int rc = pipepair (parents, pipes, hwms, delays);
errno_assert (rc == 0);
// Attach local end of the pipe to this socket object.
attach_pipe (pipes [0]);
// If required, send the identity of the local socket to the peer.
if (options.send_identity) {
msg_t id;
rc = id.init_size (options.identity_size);
zmq_assert (rc == 0);
memcpy (id.data (), options.identity, options.identity_size);
id.set_flags (msg_t::identity);
bool written = pipes [0]->write (&id);
zmq_assert (written);
pipes [0]->flush ();
}
// If required, send the identity of the peer to the local socket.
if (peer.options.send_identity) {
msg_t id;
rc = id.init_size (peer.options.identity_size);
zmq_assert (rc == 0);
memcpy (id.data (), peer.options.identity, peer.options.identity_size);
id.set_flags (msg_t::identity);
bool written = pipes [1]->write (&id);
zmq_assert (written);
pipes [1]->flush ();
}
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
send_bind (peer.socket, pipes [1], false);
// Save last endpoint URI
options.last_endpoint.assign (addr_);
return 0;
}
// Choose the I/O thread to run the session in.
io_thread_t *io_thread = choose_io_thread (options.affinity);
if (!io_thread) {
errno = EMTHREAD;
return -1;
}
address_t *paddr = new (std::nothrow) address_t (protocol, address);
zmq_assert (paddr);
// Resolve address (if needed by the protocol)
if (protocol == "tcp") {
paddr->resolved.tcp_addr = new (std::nothrow) tcp_address_t ();
zmq_assert (paddr->resolved.tcp_addr);
int rc = paddr->resolved.tcp_addr->resolve (
address.c_str (), false, options.ipv4only ? true : false);
if (rc != 0) {
delete paddr;
return -1;
}
}
#if !defined ZMQ_HAVE_WINDOWS && !defined ZMQ_HAVE_OPENVMS
else if(protocol == "ipc") {
paddr->resolved.ipc_addr = new (std::nothrow) ipc_address_t ();
zmq_assert (paddr->resolved.ipc_addr);
int rc = paddr->resolved.ipc_addr->resolve (address.c_str ());
if (rc != 0) {
delete paddr;
return -1;
}
}
#endif
// Create session.
session_base_t *session = session_base_t::create (io_thread, true, this,
options, paddr);
errno_assert (session);
// Create a bi-directional pipe.
object_t *parents [2] = {this, session};
pipe_t *pipes [2] = {NULL, NULL};
int hwms [2] = {options.sndhwm, options.rcvhwm};
bool delays [2] = {options.delay_on_disconnect, options.delay_on_close};
rc = pipepair (parents, pipes, hwms, delays);
errno_assert (rc == 0);
// PGM does not support subscription forwarding; ask for all data to be
// sent to this pipe.
bool icanhasall = false;
if (protocol == "pgm" || protocol == "epgm")
icanhasall = true;
// Attach local end of the pipe to the socket object.
attach_pipe (pipes [0], icanhasall);
// Attach remote end of the pipe to the session object later on.
session->attach_pipe (pipes [1]);
// Save last endpoint URI
paddr->to_string (options.last_endpoint);
add_endpoint (addr_, (own_t *) session);
return 0;
}
int zmq::socket_base_t::connect (const char *addr_)
{
if (unlikely (ctx_terminated)) {
errno = ETERM;
return -1;
}
// Parse addr_ string.
std::string protocol;
std::string address;
int rc = parse_uri (addr_, protocol, address);
if (rc != 0)
return -1;
rc = check_protocol (protocol);
if (rc != 0)
return -1;
if (protocol == "inproc" || protocol == "sys") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
endpoint_t peer = find_endpoint (addr_);
if (!peer.socket)
return -1;
reader_t *inpipe_reader = NULL;
writer_t *inpipe_writer = NULL;
reader_t *outpipe_reader = NULL;
writer_t *outpipe_writer = NULL;
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM. (Similarly for the
// SWAP.)
int64_t hwm;
if (options.hwm == 0 || peer.options.hwm == 0)
hwm = 0;
else
hwm = options.hwm + peer.options.hwm;
int64_t swap;
if (options.swap == 0 && peer.options.swap == 0)
swap = 0;
else
swap = options.swap + peer.options.swap;
// Create inbound pipe, if required.
if (options.requires_in)
create_pipe (this, peer.socket, hwm, swap,
&inpipe_reader, &inpipe_writer);
// Create outbound pipe, if required.
if (options.requires_out)
create_pipe (peer.socket, this, hwm, swap,
&outpipe_reader, &outpipe_writer);
// Attach the pipes to this socket object.
attach_pipes (inpipe_reader, outpipe_writer, peer.options.identity);
// Attach the pipes to the peer socket. Note that peer's seqnum
// was incremented in find_endpoint function. We don't need it
// increased here.
send_bind (peer.socket, outpipe_reader, inpipe_writer,
options.identity, false);
return 0;
}
// Choose the I/O thread to run the session in.
io_thread_t *io_thread = choose_io_thread (options.affinity);
if (!io_thread) {
errno = EMTHREAD;
return -1;
}
// Create session.
connect_session_t *session = new (std::nothrow) connect_session_t (
io_thread, this, options, protocol.c_str (), address.c_str ());
alloc_assert (session);
// If 'immediate connect' feature is required, we'll create the pipes
// to the session straight away. Otherwise, they'll be created by the
// session once the connection is established.
if (options.immediate_connect) {
reader_t *inpipe_reader = NULL;
writer_t *inpipe_writer = NULL;
reader_t *outpipe_reader = NULL;
writer_t *outpipe_writer = NULL;
// Create inbound pipe, if required.
if (options.requires_in)
create_pipe (this, session, options.hwm, options.swap,
&inpipe_reader, &inpipe_writer);
// Create outbound pipe, if required.
if (options.requires_out)
create_pipe (session, this, options.hwm, options.swap,
&outpipe_reader, &outpipe_writer);
// Attach the pipes to the socket object.
attach_pipes (inpipe_reader, outpipe_writer, blob_t ());
// Attach the pipes to the session object.
session->attach_pipes (outpipe_reader, inpipe_writer, blob_t ());
}
// Activate the session. Make it a child of this socket.
launch_child (session);
return 0;
}
int zmq::socket_base_t::connect (const char *addr_)
{
ENTER_MUTEX();
if (unlikely (ctx_terminated)) {
errno = ETERM;
EXIT_MUTEX();
return -1;
}
// Process pending commands, if any.
int rc = process_commands (0, false);
if (unlikely (rc != 0)) {
EXIT_MUTEX();
return -1;
}
// Parse addr_ string.
std::string protocol;
std::string address;
if (parse_uri (addr_, protocol, address) || check_protocol (protocol)) {
EXIT_MUTEX();
return -1;
}
if (protocol == "inproc") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
endpoint_t peer = find_endpoint (addr_);
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
int sndhwm = 0;
if (peer.socket == NULL)
sndhwm = options.sndhwm;
else if (options.sndhwm != 0 && peer.options.rcvhwm != 0)
sndhwm = options.sndhwm + peer.options.rcvhwm;
int rcvhwm = 0;
if (peer.socket == NULL)
rcvhwm = options.rcvhwm;
else
if (options.rcvhwm != 0 && peer.options.sndhwm != 0)
rcvhwm = options.rcvhwm + peer.options.sndhwm;
// Create a bi-directional pipe to connect the peers.
object_t *parents [2] = {this, peer.socket == NULL ? this : peer.socket};
pipe_t *new_pipes [2] = {NULL, NULL};
bool conflate = options.conflate &&
(options.type == ZMQ_DEALER ||
options.type == ZMQ_PULL ||
options.type == ZMQ_PUSH ||
options.type == ZMQ_PUB ||
options.type == ZMQ_SUB);
int hwms [2] = {conflate? -1 : sndhwm, conflate? -1 : rcvhwm};
bool conflates [2] = {conflate, conflate};
int rc = pipepair (parents, new_pipes, hwms, conflates);
if (!conflate) {
new_pipes[0]->set_hwms_boost(peer.options.sndhwm, peer.options.rcvhwm);
new_pipes[1]->set_hwms_boost(options.sndhwm, options.rcvhwm);
}
errno_assert (rc == 0);
if (!peer.socket) {
// The peer doesn't exist yet so we don't know whether
// to send the identity message or not. To resolve this,
// we always send our identity and drop it later if
// the peer doesn't expect it.
msg_t id;
rc = id.init_size (options.identity_size);
errno_assert (rc == 0);
memcpy (id.data (), options.identity, options.identity_size);
id.set_flags (msg_t::identity);
bool written = new_pipes [0]->write (&id);
zmq_assert (written);
new_pipes [0]->flush ();
const endpoint_t endpoint = {this, options};
pend_connection (std::string (addr_), endpoint, new_pipes);
}
else {
// If required, send the identity of the local socket to the peer.
if (peer.options.recv_identity) {
msg_t id;
rc = id.init_size (options.identity_size);
errno_assert (rc == 0);
memcpy (id.data (), options.identity, options.identity_size);
id.set_flags (msg_t::identity);
bool written = new_pipes [0]->write (&id);
zmq_assert (written);
new_pipes [0]->flush ();
}
// If required, send the identity of the peer to the local socket.
if (options.recv_identity) {
msg_t id;
rc = id.init_size (peer.options.identity_size);
errno_assert (rc == 0);
memcpy (id.data (), peer.options.identity, peer.options.identity_size);
id.set_flags (msg_t::identity);
bool written = new_pipes [1]->write (&id);
zmq_assert (written);
new_pipes [1]->flush ();
}
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
send_bind (peer.socket, new_pipes [1], false);
}
// Attach local end of the pipe to this socket object.
attach_pipe (new_pipes [0]);
// Save last endpoint URI
last_endpoint.assign (addr_);
// remember inproc connections for disconnect
inprocs.insert (inprocs_t::value_type (std::string (addr_), new_pipes [0]));
options.connected = true;
EXIT_MUTEX();
return 0;
}
bool is_single_connect = (options.type == ZMQ_DEALER ||
options.type == ZMQ_SUB ||
options.type == ZMQ_REQ);
if (unlikely (is_single_connect)) {
const endpoints_t::iterator it = endpoints.find (addr_);
if (it != endpoints.end ()) {
// There is no valid use for multiple connects for SUB-PUB nor
// DEALER-ROUTER nor REQ-REP. Multiple connects produces
// nonsensical results.
EXIT_MUTEX();
return 0;
}
}
// Choose the I/O thread to run the session in.
io_thread_t *io_thread = choose_io_thread (options.affinity);
if (!io_thread) {
errno = EMTHREAD;
EXIT_MUTEX();
return -1;
}
address_t *paddr = new (std::nothrow) address_t (protocol, address);
alloc_assert (paddr);
// Resolve address (if needed by the protocol)
if (protocol == "tcp") {
// Do some basic sanity checks on tcp:// address syntax
// - hostname starts with digit or letter, with embedded '-' or '.'
// - IPv6 address may contain hex chars and colons.
// - IPv4 address may contain decimal digits and dots.
// - Address must end in ":port" where port is *, or numeric
// - Address may contain two parts separated by ':'
// Following code is quick and dirty check to catch obvious errors,
// without trying to be fully accurate.
const char *check = address.c_str ();
if (isalnum (*check) || isxdigit (*check) || *check == '[') {
check++;
while (isalnum (*check)
|| isxdigit (*check)
|| *check == '.' || *check == '-' || *check == ':'|| *check == ';'
|| *check == ']')
check++;
}
// Assume the worst, now look for success
rc = -1;
// Did we reach the end of the address safely?
if (*check == 0) {
// Do we have a valid port string? (cannot be '*' in connect
check = strrchr (address.c_str (), ':');
if (check) {
check++;
if (*check && (isdigit (*check)))
rc = 0; // Valid
}
}
if (rc == -1) {
errno = EINVAL;
LIBZMQ_DELETE(paddr);
EXIT_MUTEX();
return -1;
}
// Defer resolution until a socket is opened
paddr->resolved.tcp_addr = NULL;
}
#if !defined ZMQ_HAVE_WINDOWS && !defined ZMQ_HAVE_OPENVMS
else
if (protocol == "ipc") {
paddr->resolved.ipc_addr = new (std::nothrow) ipc_address_t ();
alloc_assert (paddr->resolved.ipc_addr);
int rc = paddr->resolved.ipc_addr->resolve (address.c_str ());
if (rc != 0) {
LIBZMQ_DELETE(paddr);
EXIT_MUTEX();
return -1;
}
}
#endif
// TBD - Should we check address for ZMQ_HAVE_NORM???
#ifdef ZMQ_HAVE_OPENPGM
if (protocol == "pgm" || protocol == "epgm") {
struct pgm_addrinfo_t *res = NULL;
uint16_t port_number = 0;
int rc = pgm_socket_t::init_address(address.c_str(), &res, &port_number);
if (res != NULL)
pgm_freeaddrinfo (res);
if (rc != 0 || port_number == 0) {
EXIT_MUTEX();
return -1;
}
}
#endif
#if defined ZMQ_HAVE_TIPC
else
if (protocol == "tipc") {
paddr->resolved.tipc_addr = new (std::nothrow) tipc_address_t ();
alloc_assert (paddr->resolved.tipc_addr);
int rc = paddr->resolved.tipc_addr->resolve (address.c_str());
if (rc != 0) {
LIBZMQ_DELETE(paddr);
EXIT_MUTEX();
return -1;
}
}
#endif
// Create session.
session_base_t *session = session_base_t::create (io_thread, true, this,
options, paddr);
errno_assert (session);
// PGM does not support subscription forwarding; ask for all data to be
// sent to this pipe. (same for NORM, currently?)
bool subscribe_to_all = protocol == "pgm" || protocol == "epgm" || protocol == "norm";
pipe_t *newpipe = NULL;
if (options.immediate != 1 || subscribe_to_all) {
// Create a bi-directional pipe.
object_t *parents [2] = {this, session};
pipe_t *new_pipes [2] = {NULL, NULL};
bool conflate = options.conflate &&
(options.type == ZMQ_DEALER ||
options.type == ZMQ_PULL ||
options.type == ZMQ_PUSH ||
options.type == ZMQ_PUB ||
options.type == ZMQ_SUB);
int hwms [2] = {conflate? -1 : options.sndhwm,
conflate? -1 : options.rcvhwm};
bool conflates [2] = {conflate, conflate};
rc = pipepair (parents, new_pipes, hwms, conflates);
errno_assert (rc == 0);
// Attach local end of the pipe to the socket object.
attach_pipe (new_pipes [0], subscribe_to_all);
newpipe = new_pipes [0];
// Attach remote end of the pipe to the session object later on.
session->attach_pipe (new_pipes [1]);
}
// Save last endpoint URI
paddr->to_string (last_endpoint);
add_endpoint (addr_, (own_t *) session, newpipe);
EXIT_MUTEX();
return 0;
}
int zmq::socket_base_t::connect (const char *addr_)
{
if (unlikely (app_thread->is_terminated ())) {
errno = ETERM;
return -1;
}
// Parse addr_ string.
std::string addr_type;
std::string addr_args;
std::string addr (addr_);
std::string::size_type pos = addr.find ("://");
if (pos == std::string::npos) {
errno = EINVAL;
return -1;
}
addr_type = addr.substr (0, pos);
addr_args = addr.substr (pos + 3);
if (addr_type == "inproc") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer socket.
socket_base_t *peer = find_endpoint (addr_args.c_str ());
if (!peer)
return -1;
pipe_t *in_pipe = NULL;
pipe_t *out_pipe = NULL;
// Create inbound pipe, if required.
if (options.requires_in) {
in_pipe = new (std::nothrow) pipe_t (this, peer, options.hwm);
zmq_assert (in_pipe);
}
// Create outbound pipe, if required.
if (options.requires_out) {
out_pipe = new (std::nothrow) pipe_t (peer, this, options.hwm);
zmq_assert (out_pipe);
}
// Attach the pipes to this socket object.
attach_pipes (in_pipe ? &in_pipe->reader : NULL,
out_pipe ? &out_pipe->writer : NULL, blob_t ());
// Attach the pipes to the peer socket. Note that peer's seqnum
// was incremented in find_endpoint function. The callee is notified
// about the fact via the last parameter.
send_bind (peer, out_pipe ? &out_pipe->reader : NULL,
in_pipe ? &in_pipe->writer : NULL, options.identity, false);
return 0;
}
// Create unnamed session.
io_thread_t *io_thread = choose_io_thread (options.affinity);
session_t *session = new (std::nothrow) session_t (io_thread,
this, options);
zmq_assert (session);
// If 'immediate connect' feature is required, we'll created the pipes
// to the session straight away. Otherwise, they'll be created by the
// session once the connection is established.
if (options.immediate_connect) {
pipe_t *in_pipe = NULL;
pipe_t *out_pipe = NULL;
// Create inbound pipe, if required.
if (options.requires_in) {
in_pipe = new (std::nothrow) pipe_t (this, session, options.hwm);
zmq_assert (in_pipe);
}
// Create outbound pipe, if required.
if (options.requires_out) {
out_pipe = new (std::nothrow) pipe_t (session, this, options.hwm);
zmq_assert (out_pipe);
}
// Attach the pipes to the socket object.
attach_pipes (in_pipe ? &in_pipe->reader : NULL,
out_pipe ? &out_pipe->writer : NULL, blob_t ());
// Attach the pipes to the session object.
session->attach_pipes (out_pipe ? &out_pipe->reader : NULL,
in_pipe ? &in_pipe->writer : NULL, blob_t ());
}
// Activate the session.
send_plug (session);
send_own (this, session);
if (addr_type == "tcp" || addr_type == "ipc") {
#if defined ZMQ_HAVE_WINDOWS || defined ZMQ_HAVE_OPENVMS
// Windows named pipes are not compatible with Winsock API.
// There's no UNIX domain socket implementation on OpenVMS.
if (addr_type == "ipc") {
errno = EPROTONOSUPPORT;
return -1;
}
#endif
// Create the connecter object. Supply it with the session name
// so that it can bind the new connection to the session once
// it is established.
zmq_connecter_t *connecter = new (std::nothrow) zmq_connecter_t (
choose_io_thread (options.affinity), this, options,
session->get_ordinal (), false);
zmq_assert (connecter);
int rc = connecter->set_address (addr_type.c_str(), addr_args.c_str ());
if (rc != 0) {
delete connecter;
return -1;
}
send_plug (connecter);
send_own (this, connecter);
return 0;
}
#if defined ZMQ_HAVE_OPENPGM
if (addr_type == "pgm" || addr_type == "epgm") {
// If the socket type requires bi-directional communication
// multicast is not an option (it is uni-directional).
if (options.requires_in && options.requires_out) {
errno = ENOCOMPATPROTO;
return -1;
}
// For epgm, pgm transport with UDP encapsulation is used.
bool udp_encapsulation = (addr_type == "epgm");
// At this point we'll create message pipes to the session straight
// away. There's no point in delaying it as no concept of 'connect'
// exists with PGM anyway.
if (options.requires_out) {
// PGM sender.
pgm_sender_t *pgm_sender = new (std::nothrow) pgm_sender_t (
choose_io_thread (options.affinity), options);
zmq_assert (pgm_sender);
int rc = pgm_sender->init (udp_encapsulation, addr_args.c_str ());
if (rc != 0) {
delete pgm_sender;
return -1;
}
send_attach (session, pgm_sender, blob_t ());
}
else if (options.requires_in) {
// PGM receiver.
pgm_receiver_t *pgm_receiver = new (std::nothrow) pgm_receiver_t (
choose_io_thread (options.affinity), options);
zmq_assert (pgm_receiver);
int rc = pgm_receiver->init (udp_encapsulation, addr_args.c_str ());
if (rc != 0) {
delete pgm_receiver;
return -1;
}
send_attach (session, pgm_receiver, blob_t ());
}
else
zmq_assert (false);
return 0;
}
#endif
// Unknown protoco.
errno = EPROTONOSUPPORT;
return -1;
}
int zmq::socket_base_t::connect (const char *addr_)
{
if (unlikely (ctx_terminated)) {
errno = ETERM;
return -1;
}
// Parse addr_ string.
std::string protocol;
std::string address;
int rc = parse_uri (addr_, protocol, address);
if (rc != 0)
return -1;
rc = check_protocol (protocol);
if (rc != 0)
return -1;
if (protocol == "inproc" || protocol == "sys") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
endpoint_t peer = find_endpoint (addr_);
if (!peer.socket)
return -1;
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
int sndhwm;
int rcvhwm;
if (options.sndhwm == 0 || peer.options.rcvhwm == 0)
sndhwm = 0;
else
sndhwm = options.sndhwm + peer.options.rcvhwm;
if (options.rcvhwm == 0 || peer.options.sndhwm == 0)
rcvhwm = 0;
else
rcvhwm = options.rcvhwm + peer.options.sndhwm;
// Create a bi-directional pipe to connect the peers.
object_t *parents [2] = {this, peer.socket};
pipe_t *pipes [2] = {NULL, NULL};
int hwms [2] = {sndhwm, rcvhwm};
bool delays [2] = {options.delay_on_disconnect, options.delay_on_close};
int rc = pipepair (parents, pipes, hwms, delays);
errno_assert (rc == 0);
// Attach local end of the pipe to this socket object.
attach_pipe (pipes [0]);
// If required, send the identity of the local socket to the peer.
if (options.send_identity) {
msg_t id;
rc = id.init_size (options.identity_size);
zmq_assert (rc == 0);
memcpy (id.data (), options.identity, options.identity_size);
id.set_flags (msg_t::identity);
bool written = pipes [0]->write (&id);
zmq_assert (written);
}
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
send_bind (peer.socket, pipes [1], false);
return 0;
}
// Choose the I/O thread to run the session in.
io_thread_t *io_thread = choose_io_thread (options.affinity);
if (!io_thread) {
errno = EMTHREAD;
return -1;
}
// Create session.
session_base_t *session = session_base_t::create (io_thread, true, this,
options, protocol.c_str (), address.c_str ());
errno_assert (session);
// Create a bi-directional pipe.
object_t *parents [2] = {this, session};
pipe_t *pipes [2] = {NULL, NULL};
int hwms [2] = {options.sndhwm, options.rcvhwm};
bool delays [2] = {options.delay_on_disconnect, options.delay_on_close};
rc = pipepair (parents, pipes, hwms, delays);
errno_assert (rc == 0);
// PGM does not support subscription forwarding; ask for all data to be
// sent to this pipe.
bool icanhasall = false;
if (protocol == "pgm" || protocol == "epgm")
icanhasall = true;
// Attach local end of the pipe to the socket object.
attach_pipe (pipes [0], icanhasall);
// Attach remote end of the pipe to the session object later on.
session->attach_pipe (pipes [1]);
// Activate the session. Make it a child of this socket.
launch_child (session);
return 0;
}
int zmq::socket_base_t::connect (const char *addr_)
{
if (unlikely (ctx_terminated)) {
errno = ETERM;
return -1;
}
// Parse addr_ string.
std::string protocol;
std::string address;
int rc = parse_uri (addr_, protocol, address);
if (rc != 0)
return -1;
// Checks that protocol is valid and supported on this system
rc = check_protocol (protocol);
if (rc != 0)
return -1;
// Parsed address for validation
sockaddr_storage addr;
socklen_t addr_len;
if (protocol == "tcp")
rc = resolve_ip_hostname (&addr, &addr_len, address.c_str ());
else
if (protocol == "ipc")
rc = resolve_local_path (&addr, &addr_len, address.c_str ());
if (rc != 0)
return -1;
if (protocol == "inproc" || protocol == "sys") {
// TODO: inproc connect is specific with respect to creating pipes
// as there's no 'reconnect' functionality implemented. Once that
// is in place we should follow generic pipe creation algorithm.
// Find the peer endpoint.
endpoint_t peer = find_endpoint (addr_);
if (!peer.socket)
return -1;
// The total HWM for an inproc connection should be the sum of
// the binder's HWM and the connector's HWM.
int sndhwm;
int rcvhwm;
if (options.sndhwm == 0 || peer.options.rcvhwm == 0)
sndhwm = 0;
else
sndhwm = options.sndhwm + peer.options.rcvhwm;
if (options.rcvhwm == 0 || peer.options.sndhwm == 0)
rcvhwm = 0;
else
rcvhwm = options.rcvhwm + peer.options.sndhwm;
// Create a bi-directional pipe to connect the peers.
object_t *parents [2] = {this, peer.socket};
pipe_t *pipes [2] = {NULL, NULL};
int hwms [2] = {sndhwm, rcvhwm};
bool delays [2] = {options.delay_on_disconnect, options.delay_on_close};
int rc = pipepair (parents, pipes, hwms, delays);
errno_assert (rc == 0);
// Attach local end of the pipe to this socket object.
attach_pipe (pipes [0], peer.options.identity);
// Attach remote end of the pipe to the peer socket. Note that peer's
// seqnum was incremented in find_endpoint function. We don't need it
// increased here.
send_bind (peer.socket, pipes [1], options.identity, false);
return 0;
}
// Choose the I/O thread to run the session in.
io_thread_t *io_thread = choose_io_thread (options.affinity);
if (!io_thread) {
errno = EMTHREAD;
return -1;
}
// Create session.
connect_session_t *session = new (std::nothrow) connect_session_t (
io_thread, this, options, protocol.c_str (), address.c_str ());
alloc_assert (session);
// If 'immediate connect' feature is required, we'll create the pipes
// to the session straight away. Otherwise, they'll be created by the
// session once the connection is established.
if (options.immediate_connect) {
// Create a bi-directional pipe.
object_t *parents [2] = {this, session};
pipe_t *pipes [2] = {NULL, NULL};
int hwms [2] = {options.sndhwm, options.rcvhwm};
bool delays [2] = {options.delay_on_disconnect, options.delay_on_close};
int rc = pipepair (parents, pipes, hwms, delays);
errno_assert (rc == 0);
// Attach local end of the pipe to the socket object.
attach_pipe (pipes [0], blob_t ());
// Attach remote end of the pipe to the session object later on.
session->attach_pipe (pipes [1]);
}
// Activate the session. Make it a child of this socket.
launch_child (session);
return 0;
}
