static int mmc_load_fpga_image_fat(struct mmc *mmc)
{
int err;
int devnum = 0;
const fpga_desc *const desc = fpga_get_desc(devnum);
Xilinx_desc *desc_xilinx = desc->devdesc;
/* FIXME = standard file size + header desc_xilinx->size + 0x6c */
err = file_fat_read(CONFIG_SPL_FPGA_LOAD_ARGS_NAME,
(void *)CONFIG_SPL_FPGA_LOAD_ADDR,
0);
if (err <= 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: error reading image %s, err - %d\n",
CONFIG_SPL_FPGA_LOAD_ARGS_NAME, err);
#endif
return -1;
}
#ifdef CONFIG_SPL_FPGA_BIT
return fpga_loadbitstream(devnum, (char *)CONFIG_SPL_FPGA_LOAD_ADDR,
desc_xilinx->size, BIT_FULL);
#else
return fpga_load(devnum, (const void *)CONFIG_SPL_FPGA_LOAD_ADDR,
desc_xilinx->size, BIT_FULL);
#endif
}
int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
ulong tmp_img_addr, img_data, img_len;
void *buf;
int conf_noffset;
int fit_img_result;
char *uname, *name;
int err;
int devnum = 0; /* TODO support multi fpga platforms */
const fpga_desc * const desc = fpga_get_desc(devnum);
xilinx_desc *desc_xilinx = desc->devdesc;
/* Check to see if the images struct has a FIT configuration */
if (!genimg_has_config(images)) {
debug("## FIT configuration was not specified\n");
return 0;
}
/*
* Obtain the os FIT header from the images struct
* copy from dataflash if needed
*/
tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
tmp_img_addr = genimg_get_image(tmp_img_addr);
buf = map_sysmem(tmp_img_addr, 0);
/*
* Check image type. For FIT images get FIT node
* and attempt to locate a generic binary.
*/
switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_FIT:
conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
err = fdt_get_string_index(buf, conf_noffset, FIT_FPGA_PROP, 0,
(const char **)&uname);
if (err < 0) {
debug("## FPGA image is not specified\n");
return 0;
}
fit_img_result = fit_image_load(images,
tmp_img_addr,
(const char **)&uname,
&(images->fit_uname_cfg),
arch,
IH_TYPE_FPGA,
BOOTSTAGE_ID_FPGA_INIT,
FIT_LOAD_OPTIONAL_NON_ZERO,
&img_data, &img_len);
debug("FPGA image (%s) loaded to 0x%lx/size 0x%lx\n",
uname, img_data, img_len);
if (fit_img_result < 0) {
/* Something went wrong! */
return fit_img_result;
}
if (img_len >= desc_xilinx->size) {
name = "full";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_FULL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
img_len, BIT_FULL);
} else {
name = "partial";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_PARTIAL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
img_len, BIT_PARTIAL);
}
printf(" Programming %s bitstream... ", name);
if (err)
printf("failed\n");
else
printf("OK\n");
break;
default:
printf("The given image format is not supported (corrupt?)\n");
return 1;
}
return 0;
}
/* command form:
* fpga <op> <device number> <data addr> <datasize>
* where op is 'load', 'dump', or 'info'
* If there is no device number field, the fpga environment variable is used.
* If there is no data addr field, the fpgadata environment variable is used.
* The info command requires no data address field.
*/
int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
int op, dev = FPGA_INVALID_DEVICE;
size_t data_size = 0;
void *fpga_data = NULL;
char *devstr = getenv("fpga");
char *datastr = getenv("fpgadata");
int rc = FPGA_FAIL;
int wrong_parms = 0;
#if defined(CONFIG_FIT)
const char *fit_uname = NULL;
ulong fit_addr;
#endif
#if defined(CONFIG_CMD_FPGA_LOADFS)
fpga_fs_info fpga_fsinfo;
fpga_fsinfo.fstype = FS_TYPE_ANY;
#endif
if (devstr)
dev = (int) simple_strtoul(devstr, NULL, 16);
if (datastr)
fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
switch (argc) {
#if defined(CONFIG_CMD_FPGA_LOADFS)
case 9:
fpga_fsinfo.blocksize = (unsigned int)
simple_strtoul(argv[5], NULL, 16);
fpga_fsinfo.interface = argv[6];
fpga_fsinfo.dev_part = argv[7];
fpga_fsinfo.filename = argv[8];
#endif
case 5: /* fpga <op> <dev> <data> <datasize> */
data_size = simple_strtoul(argv[4], NULL, 16);
case 4: /* fpga <op> <dev> <data> */
#if defined(CONFIG_FIT)
if (fit_parse_subimage(argv[3], (ulong)fpga_data,
&fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
debug("* fpga: subimage '%s' from FIT image ",
fit_uname);
debug("at 0x%08lx\n", fit_addr);
} else
#endif
{
fpga_data = (void *)simple_strtoul(argv[3], NULL, 16);
debug("* fpga: cmdline image address = 0x%08lx\n",
(ulong)fpga_data);
}
debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data);
case 3: /* fpga <op> <dev | data addr> */
dev = (int)simple_strtoul(argv[2], NULL, 16);
debug("%s: device = %d\n", __func__, dev);
/* FIXME - this is a really weak test */
if ((argc == 3) && (dev > fpga_count())) {
/* must be buffer ptr */
debug("%s: Assuming buffer pointer in arg 3\n",
__func__);
#if defined(CONFIG_FIT)
if (fit_parse_subimage(argv[2], (ulong)fpga_data,
&fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
debug("* fpga: subimage '%s' from FIT image ",
fit_uname);
debug("at 0x%08lx\n", fit_addr);
} else
#endif
{
fpga_data = (void *)(uintptr_t)dev;
debug("* fpga: cmdline image addr = 0x%08lx\n",
(ulong)fpga_data);
}
debug("%s: fpga_data = 0x%lx\n",
__func__, (ulong)fpga_data);
dev = FPGA_INVALID_DEVICE; /* reset device num */
}
case 2: /* fpga <op> */
op = (int)fpga_get_op(argv[1]);
break;
default:
debug("%s: Too many or too few args (%d)\n", __func__, argc);
op = FPGA_NONE; /* force usage display */
break;
}
if (dev == FPGA_INVALID_DEVICE) {
puts("FPGA device not specified\n");
op = FPGA_NONE;
}
switch (op) {
case FPGA_NONE:
case FPGA_INFO:
break;
#if defined(CONFIG_CMD_FPGA_LOADFS)
case FPGA_LOADFS:
/* Blocksize can be zero */
if (!fpga_fsinfo.interface || !fpga_fsinfo.dev_part ||
!fpga_fsinfo.filename)
wrong_parms = 1;
#endif
case FPGA_LOAD:
case FPGA_LOADP:
case FPGA_LOADB:
case FPGA_LOADBP:
case FPGA_DUMP:
if (!fpga_data || !data_size)
wrong_parms = 1;
break;
#if defined(CONFIG_CMD_FPGA_LOADMK)
case FPGA_LOADMK:
if (!fpga_data)
wrong_parms = 1;
break;
#endif
}
if (wrong_parms) {
puts("Wrong parameters for FPGA request\n");
op = FPGA_NONE;
}
switch (op) {
case FPGA_NONE:
return CMD_RET_USAGE;
case FPGA_INFO:
rc = fpga_info(dev);
break;
case FPGA_LOAD:
rc = fpga_load(dev, fpga_data, data_size, BIT_FULL);
break;
#if defined(CONFIG_CMD_FPGA_LOADP)
case FPGA_LOADP:
rc = fpga_load(dev, fpga_data, data_size, BIT_PARTIAL);
break;
#endif
case FPGA_LOADB:
rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_FULL);
break;
#if defined(CONFIG_CMD_FPGA_LOADBP)
case FPGA_LOADBP:
rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_PARTIAL);
break;
#endif
#if defined(CONFIG_CMD_FPGA_LOADFS)
case FPGA_LOADFS:
rc = fpga_fsload(dev, fpga_data, data_size, &fpga_fsinfo);
break;
#endif
#if defined(CONFIG_CMD_FPGA_LOADMK)
case FPGA_LOADMK:
switch (genimg_get_format(fpga_data)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
{
image_header_t *hdr =
(image_header_t *)fpga_data;
ulong data;
uint8_t comp;
comp = image_get_comp(hdr);
if (comp == IH_COMP_GZIP) {
#if defined(CONFIG_GZIP)
ulong image_buf = image_get_data(hdr);
data = image_get_load(hdr);
ulong image_size = ~0UL;
if (gunzip((void *)data, ~0UL,
(void *)image_buf,
&image_size) != 0) {
puts("GUNZIP: error\n");
return 1;
}
data_size = image_size;
#else
puts("Gunzip image is not supported\n");
return 1;
#endif
} else {
data = (ulong)image_get_data(hdr);
data_size = image_get_data_size(hdr);
}
rc = fpga_load(dev, (void *)data, data_size,
BIT_FULL);
}
break;
#endif
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
{
const void *fit_hdr = (const void *)fpga_data;
int noffset;
const void *fit_data;
if (fit_uname == NULL) {
puts("No FIT subimage unit name\n");
return 1;
}
if (!fit_check_format(fit_hdr)) {
puts("Bad FIT image format\n");
return 1;
}
/* get fpga component image node offset */
noffset = fit_image_get_node(fit_hdr,
fit_uname);
if (noffset < 0) {
printf("Can't find '%s' FIT subimage\n",
fit_uname);
return 1;
}
/* verify integrity */
if (!fit_image_verify(fit_hdr, noffset)) {
puts ("Bad Data Hash\n");
return 1;
}
/* get fpga subimage data address and length */
if (fit_image_get_data(fit_hdr, noffset,
&fit_data, &data_size)) {
puts("Fpga subimage data not found\n");
return 1;
}
rc = fpga_load(dev, fit_data, data_size,
BIT_FULL);
}
break;
#endif
default:
puts("** Unknown image type\n");
rc = FPGA_FAIL;
break;
}
break;
#endif
case FPGA_DUMP:
rc = fpga_dump(dev, fpga_data, data_size);
break;
default:
printf("Unknown operation\n");
return CMD_RET_USAGE;
}
return rc;
}
/* command form:
* fpga <op> <device number> <data addr> <datasize>
* where op is 'load', 'dump', or 'info'
* If there is no device number field, the fpga environment variable is used.
* If there is no data addr field, the fpgadata environment variable is used.
* The info command requires no data address field.
*/
int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
int op, dev = FPGA_INVALID_DEVICE;
size_t data_size = 0;
void *fpga_data = NULL;
char *devstr = getenv ("fpga");
char *datastr = getenv ("fpgadata");
int rc = FPGA_FAIL;
int wrong_parms = 0;
#if defined (CONFIG_FIT)
const char *fit_uname = NULL;
ulong fit_addr;
#endif
if (devstr)
dev = (int) simple_strtoul (devstr, NULL, 16);
if (datastr)
fpga_data = (void *) simple_strtoul (datastr, NULL, 16);
switch (argc) {
case 5: /* fpga <op> <dev> <data> <datasize> */
data_size = simple_strtoul (argv[4], NULL, 16);
case 4: /* fpga <op> <dev> <data> */
#if defined(CONFIG_FIT)
if (fit_parse_subimage (argv[3], (ulong)fpga_data,
&fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
debug("* fpga: subimage '%s' from FIT image "
"at 0x%08lx\n",
fit_uname, fit_addr);
} else
#endif
{
fpga_data = (void *) simple_strtoul (argv[3], NULL, 16);
debug("* fpga: cmdline image address = 0x%08lx\n",
(ulong)fpga_data);
}
debug("%s: fpga_data = 0x%x\n", __func__, (uint) fpga_data);
case 3: /* fpga <op> <dev | data addr> */
dev = (int) simple_strtoul (argv[2], NULL, 16);
debug("%s: device = %d\n", __func__, dev);
/* FIXME - this is a really weak test */
if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */
debug("%s: Assuming buffer pointer in arg 3\n",
__func__);
#if defined(CONFIG_FIT)
if (fit_parse_subimage (argv[2], (ulong)fpga_data,
&fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
debug("* fpga: subimage '%s' from FIT image "
"at 0x%08lx\n",
fit_uname, fit_addr);
} else
#endif
{
fpga_data = (void *) dev;
debug("* fpga: cmdline image address = "
"0x%08lx\n", (ulong)fpga_data);
}
debug("%s: fpga_data = 0x%x\n",
__func__, (uint) fpga_data);
dev = FPGA_INVALID_DEVICE; /* reset device num */
}
case 2: /* fpga <op> */
op = (int) fpga_get_op (argv[1]);
break;
default:
debug("%s: Too many or too few args (%d)\n",
__func__, argc);
op = FPGA_NONE; /* force usage display */
break;
}
if (dev == FPGA_INVALID_DEVICE) {
puts("FPGA device not specified\n");
op = FPGA_NONE;
}
switch (op) {
case FPGA_NONE:
case FPGA_INFO:
break;
case FPGA_LOAD:
case FPGA_LOADB:
case FPGA_DUMP:
if (!fpga_data || !data_size)
wrong_parms = 1;
break;
case FPGA_LOADMK:
if (!fpga_data)
wrong_parms = 1;
break;
}
if (wrong_parms) {
puts("Wrong parameters for FPGA request\n");
op = FPGA_NONE;
}
switch (op) {
case FPGA_NONE:
return CMD_RET_USAGE;
case FPGA_INFO:
rc = fpga_info (dev);
break;
case FPGA_LOAD:
rc = fpga_load (dev, fpga_data, data_size);
break;
case FPGA_LOADB:
rc = fpga_loadbitstream(dev, fpga_data, data_size);
break;
case FPGA_LOADMK:
switch (genimg_get_format (fpga_data)) {
case IMAGE_FORMAT_LEGACY:
{
image_header_t *hdr = (image_header_t *)fpga_data;
ulong data;
data = (ulong)image_get_data (hdr);
data_size = image_get_data_size (hdr);
rc = fpga_load (dev, (void *)data, data_size);
}
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
{
const void *fit_hdr = (const void *)fpga_data;
int noffset;
const void *fit_data;
if (fit_uname == NULL) {
puts ("No FIT subimage unit name\n");
return 1;
}
if (!fit_check_format (fit_hdr)) {
puts ("Bad FIT image format\n");
return 1;
}
/* get fpga component image node offset */
noffset = fit_image_get_node (fit_hdr, fit_uname);
if (noffset < 0) {
printf ("Can't find '%s' FIT subimage\n", fit_uname);
return 1;
}
/* verify integrity */
if (!fit_image_verify(fit_hdr, noffset)) {
puts ("Bad Data Hash\n");
return 1;
}
/* get fpga subimage data address and length */
if (fit_image_get_data (fit_hdr, noffset, &fit_data, &data_size)) {
puts ("Could not find fpga subimage data\n");
return 1;
}
rc = fpga_load (dev, fit_data, data_size);
}
break;
#endif
default:
puts ("** Unknown image type\n");
rc = FPGA_FAIL;
break;
}
break;
case FPGA_DUMP:
rc = fpga_dump (dev, fpga_data, data_size);
break;
default:
printf ("Unknown operation\n");
return CMD_RET_USAGE;
}
return (rc);
}
