Example #1
0
void init_socket(void) {
    sock_fd = socket(AF_INET, SOCK_STREAM, 0);
    if (sock_fd < 0)
       f**k(FUCK_FATAL, "Error opening socket: %s\n", fuckerror());

   // Clear sockaddr struct
   memset(&server_addr, 0, sizeof(struct sockaddr_in));

   // Populate the addres struct
   server_addr.sin_family = AF_INET;
   server_addr.sin_port = htons(PORT_NO);
   server_addr.sin_addr.s_addr = INADDR_ANY;

	// Set SO_REUSEADDR flag. Therefore the bind will succeed if the server was restarted recently (in TIME_WAIT state)
	int enable = 1;
	if (setsockopt(sock_fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(int)) < 0)
		f**k(FUCK_HARDCORE, "Error setting SO_REUSEADDR: %s\n", fuckerror());

   // Bind the addres to the socket
   if (bind(sock_fd, (struct sockaddr *) &server_addr, sizeof(struct sockaddr_in)) < 0)
       f**k(FUCK_FATAL, "Error on binding: %s\n", fuckerror());

   // Now listen bitch
   listen(sock_fd, 5);
}
Example #2
0
// Writes given input event to fd. fd must be open.
void writeEvent(struct input_event * ev) {
	int ret = write(fd, ev, sizeof(struct input_event));

	if (ret < 0)
		f**k("Failed to write");
	if (ret == 0)
		f**k("Nothing written");
	else if (ret < sizeof(struct input_event))
		f**k("Partial write");
}
Example #3
0
int main(int argc, char const *argv[]) {
    // Check for argument
    unsigned int x = 0;
	if (argc >= 2) {
		x = atoi(argv[1]);
	}
    else {
		printf("Output of \"cat /proc/bus/input/devices | grep mouse\"\n");
		system("cat /proc/bus/input/devices | grep mouse");
        printf("\nEnter event file number: "); fflush(stdout);
		if (scanf("%u", &x) != 1) f**k("Invalid input");
    }

    // Open the device
    char * path = (char *) malloc((strlen(dev_path_format) + 32));
    sprintf(path, dev_path_format, x);
    fd = open(path, O_WRONLY);
	free(path);
    if (fd < 0)
        f**k("Failed to open device");

    // Create mouse input events
    struct input_event ev;
	ev.type = EV_REL;			// Relative movement

	struct input_event ev_syn;
	ev_syn.type = EV_SYN;		// Sync event
	ev_syn.code = SYN_REPORT;	// Report any changes
	ev_syn.value = 0;


    // Inject input events to create a circle
    double t = 0, dx, dy, A, T;
    while (t < 60) {
        T = 1; A = 10;
        dx = A  * sin(t * 2 * PI / T);
        dy = A  * cos(t * 2 * PI / T);

        ev.code = REL_X;		// On the X axis
        ev.value = (int) dx;
		writeEvent(&ev);

        ev.code = REL_Y;		// On the Y axis
        ev.value = (int) dy;
        writeEvent(&ev);

		writeEvent(&ev_syn);

		t += 0.01;

        usleep(10000);
    }

    return 0;
}
Example #4
0
int main( int argc , char * argv[] )  {
    std::tuple<size_t , size_t , size_t> f**k(1,2,3);
    /*
    std::cout << std::get<0>(f**k) << std::endl;;
    std::cout << std::get<1>(f**k) << std::endl;;
    std::cout << std::get<2>(f**k) << std::endl;
    */

    /*
    typedef decltype(f**k) trans;  //得知tuple对象的类型
    size_t sz = std::tuple_size<std::tuple<size_t,size_t,size_t>>::value;  //给定tuple中成员的数量
    std::tuple_element<1,trans>::type cnt = std::get<1>(f**k);  //表示给定tuple类型中指定成员的类型
    std::cout << cnt <<std::endl;
    */

    /*
    std::tuple<std::string , std::string> duo("1","2");
    std::tuple<size_t , size_t> twoD(1, 2);
    // bool b = (duo == twoD);  类型不匹配
    std::tuple<size_t , size_t , size_t> threedD(1, 2, 3);
    //bool b = (twoD == threedD); 成员数量不同
    std::tuple<size_t , size_t> orign(3, 1);
    bool b =(orign < twoD);
    std::cout << b;
    */


    return EXIT_SUCCESS;
}
Example #5
0
/**
 * Sends the given event to the client
 * If write() fails (return less than the size of the struct) connection is closed, clientSock_fd set to -1
 * and a f**k is printed
 * @param  ev the event to be sent
 * @return    0 if successfull, -1 on error
 */
int sendEvent(struct input_eventx * ev) {
	if (clientSock_fd < 0) return -1;
	if (write(clientSock_fd, ev, sizeof(struct input_eventx)) < sizeof(struct input_eventx)) {
		f**k(FUCK_NORMAL, "Could not write to client.\n");
		return -1;
	}
	return 0;
}
Example #6
0
int main()
{
	int t;
	readInt(t);
	while(t-->0)
		f**k();
 return 0;
}
Example #7
0
int main()
{
	int t;
	scanf("%d",&t);
	while(t--)
		f**k();
 return 0;
}
Example #8
0
/**
 * Establishes connection to a client.
 * This is a blocking function.
 * @return 0 on succes and -1 on fail
 */
int acceptClient() {
    // Accept innocent clients
    socklen_t client_len = sizeof(struct sockaddr_in);
	clientSock_fd = accept(sock_fd, (struct sockaddr *) &client_addr, &client_len);
	if (clientSock_fd < 0)
		return f**k(FUCK_SILENT, "Error accepting client\n");
	printf("Client connected!\n");
    return 0;
}
Example #9
0
void init_pins() {
	wiringPiSetup();

	if (mcp3004Setup(MCP3008_PIN_BASE, 0) < 0) {
		f**k(FUCK_FATAL, "SPI error\n");
	}

	pinMode(GPIO_LMB, INPUT);
	pinMode(GPIO_RMB, INPUT);
}
Example #10
0
int main(int argc, char *argv[]) {
	ll n, i;
	ll a;
	f**k();
//	freopen("test", "r", stdin);
	scanf("%I64d", &n);
//	n = 4800;
	while (n--) {
		scanf("%I64d", &a);
		for (i = 0; i < mm; ++i)
			if (pp[i] * (ll) pp[i] == a) break;
		printf("%s\n", i >= mm ? "NO" : "YES");
	}
	return 0;
}
Example #11
0
int main() {
    int a, num, sum, n, d, i;
    scanf("%d", &a);
    while(a--) {
        sum = 0;
        memset(shit, 0, sizeof(shit));
        scanf("%d %d", &d, &n);
        for(i = 0; i < n; i++) {
             scanf("%d", &num);
             sum = (sum + num) % d;
             shit[sum]++;
        }
        printf("%I64d\n", f**k(d));
    }
    return 0;
}
Example #12
0
int main() {
    int N, M;
    int w[10], s[10], t[10], d[10];
    int i;
    int Tbu;
    double sum[10][1000];
    scanf("%d%d", &N, &M);
    for (i = 0; i < N; i++) {
        scanf("%d%d%d%d", &s[i], &w[i], &t[i], &d[i]);
        if (s[i] < 60) {
            Tbu = (60 - s[i]) / d[i] * t[i];
            M -= Tbu;
            s[i] = 60;
        }
    }
    if (M < 0) {
        printf("0\n");
        return 0;
    }
    f**k(N, M);
}
Example #13
0
/**
 * Handles SIGPIPE. Cleans up current connection, if any.
 * @param signum signal number (always SIGPIPE)
 */
void pipeHandler(int signum) {
	if (clientSock_fd < 0) return;
	f**k(FUCK_SILENT, "Pipe broken, closing connection\n");
	close(clientSock_fd);
	clientSock_fd = -1;
}
Example #14
0
void f**k() {
  ++ cnt;
  printf("%d\n", cnt);
  f**k();
}
Example #15
0
int main() {
  f**k();

  return 0;
}
Example #16
0
int main(int argc, char *argv[]) {
printf("shellcode length -> %d bytes\n", strlen(s));
int(*f**k)() = (int(*)())s;
f**k();
return 0;
}
Example #17
0
int main(int argc, char *argv[])
{
	// Handle SIGPIPE
	struct sigaction pipeAct;
	memset(&pipeAct, 0, sizeof(struct sigaction));
	pipeAct.sa_handler = pipeHandler;
	if (sigaction(SIGPIPE, &pipeAct, NULL) < 0) {
		f**k(FUCK_HARDCORE, "sigaction error: %s\n", fuckerror());
	}

	init_socket();
	init_pins();

    while (1) {
		if (acceptClient() < 0) continue; // Error on accept

		// Read resolution
		read(clientSock_fd, &xres, sizeof(uint32_t));
		read(clientSock_fd, &yres, sizeof(uint32_t));

		// Create input events
		struct input_eventx ev_x;		// Relative on the x axis
		ev_x.type = EV_REL;
		ev_x.code = REL_X;
		struct input_eventx ev_y;		// Relative on the y axis
		ev_y.type = EV_REL;
		ev_y.code = REL_Y;
		struct input_eventx ev_l;		// Left mouse button
		ev_l.type = EV_KEY;
		ev_l.code = BTN_LEFT;
		struct input_eventx ev_r;		// Right mouse button
		ev_r.type = EV_KEY;
		ev_r.code = BTN_RIGHT;
		struct input_eventx ev_syn;		// Sync event
		ev_syn.type = EV_SYN;
		ev_syn.code = SYN_REPORT;
		ev_syn.value = 0;

		// Set mouse to (0,0)
		ev_x.value = -xres;
		ev_y.value = -yres;
		if (sendEvent(&ev_x) < 0 || sendEvent(&ev_y) < 0 || sendEvent(&ev_syn) < 0) continue;

		int lmb_state = 0, rmb_state = 0;
		int x_old = 0, y_old = 0, x = 0, y = 0, px = 0, py = 0, a, b;
		int sync, tolerance = 3; // Avoids unwanted mouse jitter

		while (1) {
			sync = 0;
			// Handle button clicks
			if (digitalRead(GPIO_LMB) == HIGH && lmb_state == 0) {
				ev_l.value = lmb_state = 1;
				if (sendEvent(&ev_l) < 0) break;
				sync = 1;
			}
			if (digitalRead(GPIO_LMB) == LOW && lmb_state == 1) {
				ev_l.value = lmb_state = 0;
				if (sendEvent(&ev_l) < 0) break;
				sync = 1;
			}
			if (digitalRead(GPIO_RMB) == HIGH && rmb_state == 0) {
				ev_r.value = rmb_state = 1;
				if (sendEvent(&ev_r) < 0) break;
				sync = 1;
			}
			if (digitalRead(GPIO_RMB) == LOW && rmb_state == 1) {
				ev_r.value = rmb_state = 0;
				if (sendEvent(&ev_r) < 0) break;
				sync = 1;
			}

			// Handle mouse move
		 	a = analogRead(MCP3008_PIN_BASE);
		 	b = analogRead(MCP3008_PIN_BASE + 1);
			if ((a - px) > tolerance || (px - a) > tolerance || a == 0 || a == ANALOG_MAX) {
				px = a;
				x = (int)(px * (xres - 1) / (double)ANALOG_MAX);
				ev_x.value = x - x_old;
				x_old = x;
				if (sendEvent(&ev_x) < 0) break;
				sync = 1;
			}
			if ((b - py) > tolerance || (py - b) > tolerance || b == 0 || b == ANALOG_MAX) {
				py = b;
				y = (int)(py * (yres - 1) / (double)ANALOG_MAX);
				ev_y.value = y - y_old;
				y_old = y;
				if (sendEvent(&ev_y) < 0) break;
				sync = 1;
			}

			// If anything sent, sync
			if (sync && sendEvent(&ev_syn) < 0) break;

			usleep(20000);
		}

		// If any of the code from the while above breaks, move to the next client
		continue;
	}

	// Clean shit
	close(clientSock_fd);
 	close(sock_fd);

 	return 0;
}