C++ (Cpp) getAdcChannelPort Examples

Example #1

static void printTPSInfo(void) {
#if EFI_PROD_CODE
	GPIO_TypeDef* port = getAdcChannelPort(engineConfiguration->tpsAdcChannel);
	int pin = getAdcChannelPin(engineConfiguration->tpsAdcChannel);

	scheduleMsg(&logger, "tps min %d/max %d v=%f @%s%d", engineConfiguration->tpsMin, engineConfiguration->tpsMax, getTPSVoltage(), portname(port), pin);
#endif
	scheduleMsg(&logger, "current 10bit=%d value=%f rate=%f", getTPS10bitAdc(), getTPS(), getTpsRateOfChange());
}

Example #2

char * getPinNameByAdcChannel(const char *msg, adc_channel_e hwChannel, char *buffer) {
#if HAL_USE_ADC || defined(__DOXYGEN__)
	if (hwChannel == EFI_ADC_NONE) {
		strcpy(buffer, "NONE");
	} else {
		strcpy((char*) buffer, portname(getAdcChannelPort(msg, hwChannel)));
		itoa10(&buffer[2], getAdcChannelPin(hwChannel));
	}
#else
	strcpy(buffer, "NONE");
#endif
	return (char*) buffer;
}

Example #3

File: settings.cpp Project: jon-weisz/rusefi

static void printTPSInfo(void) {
#if (EFI_PROD_CODE && HAL_USE_ADC) || defined(__DOXYGEN__)
	if (!engineConfiguration->hasTpsSensor) {
		scheduleMsg(&logger, "NO TPS SENSOR");
		return;
	}

	GPIO_TypeDef* port = getAdcChannelPort(engineConfiguration->tpsAdcChannel);
	int pin = getAdcChannelPin(engineConfiguration->tpsAdcChannel);

	scheduleMsg(&logger, "tps min %d/max %d v=%f @%s%d", engineConfiguration->tpsMin, engineConfiguration->tpsMax,
			getTPSVoltage(PASS_ENGINE_PARAMETER_F), portname(port), pin);
#endif
	scheduleMsg(&logger, "current 10bit=%d value=%f rate=%f", getTPS10bitAdc(), getTPS(PASS_ENGINE_PARAMETER_F),
			getTpsRateOfChange());
}

Example #4

static void printFullAdcReport(void) {

	for (int index = 0; index < EFI_ADC_SLOW_CHANNELS_COUNT; index++) {
		appendMsgPrefix(&logger);

		int hwIndex = getAdcHardwareIndexByInternalIndex(index);
		GPIO_TypeDef* port = getAdcChannelPort(hwIndex);
		int pin = getAdcChannelPin(hwIndex);

		int adcValue = getAdcValueByIndex(index);
		appendPrintf(&logger, " ch%d %s%d", index, portname(port), pin);
		appendPrintf(&logger, " ADC%d 12bit=%d", hwIndex, adcValue);
		float volts = adcToVolts(adcValue);
		appendPrintf(&logger, " v=%f", volts);

		appendMsgPostfix(&logger);
		scheduleLogging(&logger);
	}
}

Example #5

File: adc_inputs.cpp Project: jon-weisz/rusefi

static void printFullAdcReport(void) {
	scheduleMsg(&logger, "fast %d slow %d", fastAdc.conversionCount, slowAdc.conversionCount);

	for (int index = 0; index < slowAdc.size(); index++) {
		appendMsgPrefix(&logger);

		adc_channel_e hwIndex = slowAdc.getAdcHardwareIndexByInternalIndex(index);
		GPIO_TypeDef* port = getAdcChannelPort(hwIndex);
		int pin = getAdcChannelPin(hwIndex);

		int adcValue = slowAdc.getAdcValueByIndex(index);
		appendPrintf(&logger, " ch%d %s%d", index, portname(port), pin);
		appendPrintf(&logger, " ADC%d 12bit=%d", hwIndex, adcValue);
		float volts = adcToVolts(adcValue);
		appendPrintf(&logger, " v=%f", volts);

		appendMsgPostfix(&logger);
		scheduleLogging(&logger);
	}
}

Example #6

File: board_test.cpp Project: jmt42/rusefi

static void processAdcPin(AdcConfiguration *adc, int index, const char *prefix) {
	adc_channel_e hwIndex = adc->getAdcHardwareIndexByInternalIndex(index);
	GPIO_TypeDef* port = getAdcChannelPort(hwIndex);
	int pin = getAdcChannelPin(hwIndex);

	int copy = stepCoutner;

	int c = 0;

	while (!isTimeForNextStep(copy)) {
		print("%s ch%d hwIndex=%d %s%d\r\n", prefix, index, hwIndex, portname(port), pin);
		int adcValue = adc->getAdcValueByIndex(index);

//		print("ADC%d val= %d%s", hwIndex, value, DELIMETER);
		float volts = adcToVolts(adcValue) * 2;
		print("v=%f  adc=%d  c=%d (hit 'n'<ENTER> for next step\r\n", volts, adcValue, c++);

		chThdSleepMilliseconds(300);

	}
}

Example #7

File: adc_inputs.cpp Project: jharvey/rusefi

static void printFullAdcReport(Logging *logger) {
	scheduleMsg(logger, "fast %d slow %d", fastAdc.conversionCount, slowAdc.conversionCount);

	for (int index = 0; index < slowAdc.size(); index++) {
		appendMsgPrefix(logger);

		adc_channel_e hwIndex = slowAdc.getAdcHardwareIndexByInternalIndex(index);

		if(hwIndex != EFI_ADC_NONE && hwIndex != EFI_ADC_ERROR)
		{
			ioportid_t port = getAdcChannelPort("print", hwIndex);
			int pin = getAdcChannelPin(hwIndex);

			int adcValue = slowAdc.getAdcValueByIndex(index);
			appendPrintf(logger, " ch%d %s%d", index, portname(port), pin);
			appendPrintf(logger, " ADC%d 12bit=%d", hwIndex, adcValue);
			float volts = adcToVolts(adcValue);
			appendPrintf(logger, " v=%.2f", volts);

			appendMsgPostfix(logger);
			scheduleLogging(logger);
		}
	}
}

Example #8

File: adc_inputs.cpp Project: jon-weisz/rusefi

static void initAdcHwChannel(adc_channel_e hwChannel) {
	GPIO_TypeDef* port = getAdcChannelPort(hwChannel);
	int pin = getAdcChannelPin(hwChannel);

	initAdcPin(port, pin, "hw");
}

Example #9

File: adc_inputs.cpp Project: glocklueng/rusefi

static void initAdcHwChannel(adc_channel_e hwChannel) {
	ioportid_t port = getAdcChannelPort(hwChannel);
	int pin = getAdcChannelPin(hwChannel);

	initAdcPin(port, pin, "hw");
}