void GENDRILL_WRITER_BASE::CreateMapFilesSet( const wxString& aPlotDirectory,
REPORTER * aReporter )
{
wxFileName fn;
wxString msg;
std::vector<DRILL_LAYER_PAIR> hole_sets = getUniqueLayerPairs();
// append a pair representing the NPTH set of holes, for separate drill files.
if( !m_merge_PTH_NPTH )
hole_sets.push_back( DRILL_LAYER_PAIR( F_Cu, B_Cu ) );
for( std::vector<DRILL_LAYER_PAIR>::const_iterator it = hole_sets.begin();
it != hole_sets.end(); ++it )
{
DRILL_LAYER_PAIR pair = *it;
// For separate drill files, the last layer pair is the NPTH drill file.
bool doing_npth = m_merge_PTH_NPTH ? false : ( it == hole_sets.end() - 1 );
buildHolesList( pair, doing_npth );
// The file is created if it has holes, or if it is the non plated drill file
// to be sure the NPTH file is up to date in separate files mode.
if( getHolesCount() > 0 || doing_npth )
{
fn = getDrillFileName( pair, doing_npth, m_merge_PTH_NPTH );
fn.SetPath( aPlotDirectory );
fn.SetExt( wxEmptyString ); // Will be added by GenDrillMap
wxString fullfilename = fn.GetFullPath() + wxT( "-drl_map" );
fullfilename << wxT(".") << GetDefaultPlotExtension( m_mapFileFmt );
bool success = genDrillMapFile( fullfilename, m_mapFileFmt );
if( ! success )
{
if( aReporter )
{
msg.Printf( _( "** Unable to create %s **\n" ), GetChars( fullfilename ) );
aReporter->Report( msg );
}
return;
}
else
{
if( aReporter )
{
msg.Printf( _( "Create file %s\n" ), GetChars( fullfilename ) );
aReporter->Report( msg );
}
}
}
}
}
bool GENDRILL_WRITER_BASE::GenDrillReportFile( const wxString& aFullFileName )
{
FILE_OUTPUTFORMATTER out( aFullFileName );
static const char separator[] =
" =============================================================\n";
wxASSERT( m_pcb );
unsigned totalHoleCount;
wxString brdFilename = m_pcb->GetFileName();
std::vector<DRILL_LAYER_PAIR> hole_sets = getUniqueLayerPairs();
out.Print( 0, "Drill report for %s\n", TO_UTF8( brdFilename ) );
out.Print( 0, "Created on %s\n\n", TO_UTF8( DateAndTime() ) );
// Output the cu layer stackup, so layer name references make sense.
out.Print( 0, "Copper Layer Stackup:\n" );
out.Print( 0, separator );
LSET cu = m_pcb->GetEnabledLayers() & LSET::AllCuMask();
int conventional_layer_num = 1;
for( LSEQ seq = cu.Seq(); seq; ++seq, ++conventional_layer_num )
{
out.Print( 0, " L%-2d: %-25s %s\n",
conventional_layer_num,
TO_UTF8( m_pcb->GetLayerName( *seq ) ),
layerName( *seq ).c_str() // generic layer name
);
}
out.Print( 0, "\n\n" );
/* output hole lists:
* 1 - through holes
* 2 - for partial holes only: by layer starting and ending pair
* 3 - Non Plated through holes
*/
bool buildNPTHlist = false; // First pass: build PTH list only
// in this loop are plated only:
for( unsigned pair_ndx = 0; pair_ndx < hole_sets.size(); ++pair_ndx )
{
DRILL_LAYER_PAIR pair = hole_sets[pair_ndx];
buildHolesList( pair, buildNPTHlist );
if( pair == DRILL_LAYER_PAIR( F_Cu, B_Cu ) )
{
out.Print( 0, "Drill file '%s' contains\n",
TO_UTF8( getDrillFileName( pair, false, m_merge_PTH_NPTH ) ) );
out.Print( 0, " plated through holes:\n" );
out.Print( 0, separator );
totalHoleCount = printToolSummary( out, false );
out.Print( 0, " Total plated holes count %u\n", totalHoleCount );
}
else // blind/buried
{
out.Print( 0, "Drill file '%s' contains\n",
TO_UTF8( getDrillFileName( pair, false, m_merge_PTH_NPTH ) ) );
out.Print( 0, " holes connecting layer pair: '%s and %s' (%s vias):\n",
TO_UTF8( m_pcb->GetLayerName( ToLAYER_ID( pair.first ) ) ),
TO_UTF8( m_pcb->GetLayerName( ToLAYER_ID( pair.second ) ) ),
pair.first == F_Cu || pair.second == B_Cu ? "blind" : "buried"
);
out.Print( 0, separator );
totalHoleCount = printToolSummary( out, false );
out.Print( 0, " Total plated holes count %u\n", totalHoleCount );
}
out.Print( 0, "\n\n" );
}
// NPTHoles. Generate the full list (pads+vias) if PTH and NPTH are merged,
// or only the NPTH list (which never has vias)
if( !m_merge_PTH_NPTH )
buildNPTHlist = true;
buildHolesList( DRILL_LAYER_PAIR( F_Cu, B_Cu ), buildNPTHlist );
// nothing wrong with an empty NPTH file in report.
if( m_merge_PTH_NPTH )
out.Print( 0, "Not plated through holes are merged with plated holes\n" );
else
out.Print( 0, "Drill file '%s' contains\n",
TO_UTF8( getDrillFileName( DRILL_LAYER_PAIR( F_Cu, B_Cu ),
true, m_merge_PTH_NPTH ) ) );
out.Print( 0, " unplated through holes:\n" );
out.Print( 0, separator );
totalHoleCount = printToolSummary( out, true );
out.Print( 0, " Total unplated holes count %u\n", totalHoleCount );
return true;
}
void GERBER_WRITER::CreateDrillandMapFilesSet( const wxString& aPlotDirectory,
bool aGenDrill, bool aGenMap,
REPORTER * aReporter )
{
// Note: In Gerber drill files, NPTH and PTH are always separate files
m_merge_PTH_NPTH = false;
wxFileName fn;
wxString msg;
std::vector<DRILL_LAYER_PAIR> hole_sets = getUniqueLayerPairs();
// append a pair representing the NPTH set of holes, for separate drill files.
// (Gerber drill files are separate files for PTH and NPTH)
hole_sets.push_back( DRILL_LAYER_PAIR( F_Cu, B_Cu ) );
for( std::vector<DRILL_LAYER_PAIR>::const_iterator it = hole_sets.begin();
it != hole_sets.end(); ++it )
{
DRILL_LAYER_PAIR pair = *it;
// For separate drill files, the last layer pair is the NPTH drill file.
bool doing_npth = ( it == hole_sets.end() - 1 );
buildHolesList( pair, doing_npth );
// The file is created if it has holes, or if it is the non plated drill file
// to be sure the NPTH file is up to date in separate files mode.
if( getHolesCount() > 0 || doing_npth )
{
fn = getDrillFileName( pair, doing_npth, false );
fn.SetPath( aPlotDirectory );
if( aGenDrill )
{
wxString fullFilename = fn.GetFullPath();
int result = createDrillFile( fullFilename, doing_npth, pair.first, pair.second );
if( result < 0 )
{
if( aReporter )
{
msg.Printf( _( "** Unable to create %s **\n" ), GetChars( fullFilename ) );
aReporter->Report( msg );
}
break;
}
else
{
if( aReporter )
{
msg.Printf( _( "Create file %s\n" ), GetChars( fullFilename ) );
aReporter->Report( msg );
}
}
}
}
}
if( aGenMap )
CreateMapFilesSet( aPlotDirectory, aReporter );
}
