int getFanInfo(int index, struct sdm_ce_fan_running_info *fan)
{
int is_raise_alarm =0 ;
unsigned short fan_speed[2];
cdebug("Start fan getFanInfo\n");
if(index != 1) // For 1610, There are one fan module with 3 subunit
{
cdebug("Error Fan index %d. \n", index);
return (-1);
}
//if(NULL == fan || NULL == fan[0].SubUnitHwState || NULL == fan[0].RunSpeed)
if(NULL == fan)
{
cdebug("The parameter in function getFanInfo is NULL\n");
return (-1);
}
memset(fan, 0, sizeof(struct sdm_ce_fan_running_info));
if(getFanSpeed(fan_speed)<0)
{
cdebug("Can not get the fan speed\n");
return (-1);
}
fan[0].RunSpeed[0] = fan_speed[0];
if (fan_speed[0]<=FAN_SPEED_THRESH)
is_raise_alarm = 1 ;
fan[0].RunSpeed[1] = fan_speed[1];
if (fan_speed[1]<=FAN_SPEED_THRESH)
is_raise_alarm = 1 ;
// cdebug("The fan speed in function getFanInfo is: \n");
// pdata((unsigned char *)fan[0].RunSpeed,4);
// setFanRunLed(is_raise_alarm);
return 0;
}
inline void GrillPid::commitFanOutput(void)
{
/* Long PWM period is 10 sec */
const unsigned int LONG_PWM_PERIOD = 10000;
const unsigned int PERIOD_SCALE = (LONG_PWM_PERIOD / TEMP_MEASURE_PERIOD);
unsigned char fanSpeed = getFanSpeed();
/* For anything above _minFanSpeed, do a nomal PWM write.
For below _minFanSpeed we use a "long pulse PWM", where
the pulse is 10 seconds in length. For each percent we are
emulating, run the fan for one interval. */
if (fanSpeed >= _minFanSpeed)
_longPwmTmr = 0;
else
{
// Simple PWM, ON for first [FanSpeed] intervals then OFF
// for the remainder of the period
if (((PERIOD_SCALE * fanSpeed / _minFanSpeed) > _longPwmTmr))
fanSpeed = _minFanSpeed;
else
fanSpeed = 0;
if (++_longPwmTmr > (PERIOD_SCALE - 1))
_longPwmTmr = 0;
} /* long PWM */
if (bit_is_set(_outputFlags, PIDFLAG_INVERT_FAN))
fanSpeed = _maxFanSpeed - fanSpeed;
analogWrite(_fanPin, mappct(fanSpeed, 0, 255));
}
void saveState()
{
for(char i = 0; i < 12; i++)
{
save_compbuff[i] = compbuff[i];
eeprom_write_byte((unsigned char*)(i+1),save_compbuff[i]);
}
save_fanspeed = getFanSpeed();
eeprom_write_byte((unsigned char*)13,save_fanspeed);
}
void SolanaServer::recomputeFS(std::string policy)
{
//Optimum proactive fan control policy
if (policy.compare(SERVER_OPTIMUM_POLICY) == 0){
double fanPlusLeak=10000;
for ( int i=0; i< NUM_FAN_SPEED; i++ ){
setFanSpeed(fanSpeedLUT[i]);
computeCPUTemp(m_cpuDynPower);
double leak = computeLeakage();
double fanpower = computeFanPower();
if ( (leak+fanpower) < fanPlusLeak ){
fanPlusLeak = leak+fanpower;
VLOG_2 << " -- Fan+Leak power for FS: " << getFanSpeed()
<< " is: " << fanPlusLeak ;
}
else {
VLOG_2 << " -- FanSpeed: " << getFanSpeed()
<< " increases power (" << leak+fanpower << ")";
setFanSpeed(fanSpeedLUT[i-1]);
break;
}
}
}
}
inline void GrillPid::commitFanOutput(void)
{
/* Long PWM period is 10 sec */
const unsigned int LONG_PWM_PERIOD = 10000;
const unsigned int PERIOD_SCALE = (LONG_PWM_PERIOD / TEMP_MEASURE_PERIOD);
unsigned char fanSpeed = getFanSpeed();
/* For anything above _minFanSpeed, do a nomal PWM write.
For below _minFanSpeed we use a "long pulse PWM", where
the pulse is 10 seconds in length. For each percent we are
emulating, run the fan for one interval. */
if (fanSpeed >= _minFanSpeed)
_longPwmTmr = 0;
else
{
// Simple PWM, ON for first [FanSpeed] intervals then OFF
// for the remainder of the period
if (((PERIOD_SCALE * fanSpeed / _minFanSpeed) > _longPwmTmr))
fanSpeed = _minFanSpeed;
else
fanSpeed = 0;
if (++_longPwmTmr > (PERIOD_SCALE - 1))
_longPwmTmr = 0;
} /* long PWM */
if (bit_is_set(_outputFlags, PIDFLAG_INVERT_FAN))
fanSpeed = _maxFanSpeed - fanSpeed;
unsigned char newBlowerOutput = mappct(fanSpeed, 0, 255);
analogWrite(_fanPin, newBlowerOutput);
#if defined(GRILLPID_FAN_BOOST_ENABLED)
// If going from 0% to non-0%, turn the blower fully on for one period
// to get it moving
if (_lastBlowerOutput == 0 && newBlowerOutput != 0)
{
digitalWrite(_fanPin, HIGH);
_fanBoostActive = true;
}
_lastBlowerOutput = newBlowerOutput;
#endif
}
void GrillPid::status(void) const
{
SerialX.print(getSetPoint(), DEC);
Serial_csv();
for (unsigned char i=0; i<TEMP_COUNT; ++i)
{
if (Probes[i]->hasTemperature())
SerialX.print(Probes[i]->Temperature, 1);
else
Serial_char('U');
Serial_csv();
}
SerialX.print(getFanSpeed(), DEC);
Serial_csv();
SerialX.print((int)FanSpeedAvg, DEC);
Serial_csv();
SerialX.print(LidOpenResumeCountdown, DEC);
}
/* hardware or reads values from the operatings system. */
static int
nvml_hardware_read( long long *value, int which_one)
//, nvml_context_t *ctx)
{
nvml_native_event_entry_t *entry;
nvmlDevice_t handle;
int cudaIdx = -1;
entry = &nvml_native_table[which_one];
*value = (long long) -1;
/* replace entry->resources with the current cuda_device->nvml device */
cudaGetDevice( &cudaIdx );
if ( cudaIdx < 0 || cudaIdx > device_count )
return PAPI_EINVAL;
/* Make sure the device we are running on has the requested event */
if ( !HAS_FEATURE( features[cudaIdx] , entry->type) )
return PAPI_EINVAL;
handle = devices[cudaIdx];
switch (entry->type) {
case FEATURE_CLOCK_INFO:
*value = getClockSpeed( handle,
(nvmlClockType_t)entry->options.clock );
break;
case FEATURE_ECC_LOCAL_ERRORS:
*value = getEccLocalErrors( handle,
(nvmlEccBitType_t)entry->options.ecc_opts.bits,
(int)entry->options.ecc_opts.which_one);
break;
case FEATURE_FAN_SPEED:
*value = getFanSpeed( handle );
break;
case FEATURE_MAX_CLOCK:
*value = getMaxClockSpeed( handle,
(nvmlClockType_t)entry->options.clock );
break;
case FEATURE_MEMORY_INFO:
*value = getMemoryInfo( handle,
(int)entry->options.which_one );
break;
case FEATURE_PERF_STATES:
*value = getPState( handle );
break;
case FEATURE_POWER:
*value = getPowerUsage( handle );
break;
case FEATURE_TEMP:
*value = getTemperature( handle );
break;
case FEATURE_ECC_TOTAL_ERRORS:
*value = getTotalEccErrors( handle,
(nvmlEccBitType_t)entry->options.ecc_opts.bits );
break;
case FEATURE_UTILIZATION:
*value = getUtilization( handle,
(int)entry->options.which_one );
break;
default:
return PAPI_EINVAL;
}
return PAPI_OK;
}
/**
* Expects one of:
* 70,MODE_ECO,FAN_AUTO (temp,acMode,fanSpeed)
* OFF
*
*/
int setState(String command) {
Spark.publish("SET_STATE", command);
int start = Time.now();
bool toggleOn = false;
int temp;
enum AcModes mode;
enum FanSpeeds speed;
if (command == "OFF") {
temp = 0;
mode = MODE_OFF;
speed = FAN_OFF;
} else if (command == "ON") {
toggleOn = true;
// Ignored but set to surpress compiler warnings
temp = 72;
mode = MODE_ECO;
speed = FAN_AUTO;
} else {
int firstComma = command.indexOf(",");
if (firstComma == -1) {
return 2;
}
int secondComma = command.indexOf(",", firstComma + 1);
if (secondComma == -1) {
return 3;
}
temp = command.substring(0, firstComma).toInt();
if (temp < MIN_TEMP || temp > MAX_TEMP) {
return 4;
}
mode = getModeForName(command.substring(firstComma + 1, secondComma));
if (mode == MODE_INVALID) {
Spark.publish("MODE_INVALID", command.substring(firstComma + 1, secondComma));
return 5;
}
speed = getSpeedForName(command.substring(secondComma + 1));
if (speed == FAN_INVALID) {
Spark.publish("FAN_INVALID", command.substring(secondComma + 1));
return 6;
}
}
// Try to get AC to the correct state for up to 10 seconds
while (Time.now() - start < 10) {
// Special handling for OFF
if (toggleOn) {
if (!isAcOn()) {
Spark.publish("ON", "");
sendNEC(AC_CMD__ON_OFF);
} else {
break;
}
}
else if (mode == MODE_OFF) {
if (isAcOn()) {
Spark.publish("OFF", "");
sendNEC(AC_CMD__ON_OFF);
} else {
break;
}
} else if (!isAcOn()) {
// First turn it on if it is off
Spark.publish("ON", "");
sendNEC(AC_CMD__ON_OFF);
} else {
bool stable = true;
if (mode != getAcMode()) {
stable = false;
switch (mode) {
case MODE_FAN:
Spark.publish("MODE", "MODE_FAN");
sendNEC(AC_CMD__FAN_ONLY);
break;
case MODE_ECO:
Spark.publish("MODE", "MODE_ECO");
sendNEC(AC_CMD__ENERGY_SAVER);
break;
case MODE_COOL:
Spark.publish("MODE", "MODE_COOL");
sendNEC(AC_CMD__COOL);
break;
}
}
if (speed != getFanSpeed()) {
stable = false;
switch (speed) {
case FAN_AUTO:
Spark.publish("SPEED", "FAN_AUTO");
sendNEC(AC_CMD__AUTO_FAN);
break;
case FAN_LOW:
Spark.publish("SPEED", "FAN_LOW");
sendNEC(AC_CMD__FAN_SPEED_D);
sendNEC(AC_CMD__FAN_SPEED_D);
sendNEC(AC_CMD__FAN_SPEED_D);
break;
case FAN_MEDIUM:
Spark.publish("SPEED", "FAN_MEDIUM");
sendNEC(AC_CMD__FAN_SPEED_D);
sendNEC(AC_CMD__FAN_SPEED_D);
sendNEC(AC_CMD__FAN_SPEED_D);
sendNEC(AC_CMD__FAN_SPEED_U);
break;
case FAN_HIGH:
Spark.publish("SPEED", "FAN_HIGH");
sendNEC(AC_CMD__FAN_SPEED_U);
sendNEC(AC_CMD__FAN_SPEED_U);
break;
}
}
if (mode != MODE_FAN && temp != getTemp()) {
stable = false;
int tempDiff = temp - getTemp();
if (tempDiff < 0) {
for (int i = 0; i < abs(tempDiff); i++) {
sendNEC(AC_CMD__TEMP_TIMER_D);
}
} else {
for (int i = 0; i < abs(tempDiff); i++) {
sendNEC(AC_CMD__TEMP_TIMER_U);
}
}
}
// Yay at a stable state!
if (stable) {
return 0;
}
}
// Wait for the AC to handle IR codes and the display to update
delay(2000);
processAcDisplayData();
}
if (Time.now() - start >= 30) {
// Return 1000 for timeout
return 1000;
} else {
// Return 0 for success
return 0;
}
}
int main(int argc, char *argv[])
{
char *cmdName;
const char *opts="Dvqt:l:h:o:m:Q:i:";
char parameter[100];
char *p;
EUI64 destPortGuid = -1;
int c;
int i;
uint8 hfi = 0;
uint8 port = 0;
IB_PATH_RECORD path;
uint16 sessionID;
uint32 regValue;
uint32 fanSpeed[OPASW_PSOC_FAN_CTRL_TACHS];
char tempStrs[I2C_OPASW_TEMP_SENSOR_COUNT][TEMP_STR_LENGTH];
uint32 psStatus;
uint8 fwVersion[40];
vpd_fruInfo_rec_t vpdInfo;
char mfgID[10];
char mfgDate[20];
char mfgTime[10];
uint8 nodeDesc[80];
opasw_ini_descriptor_get_t tableDescriptors;
table_parsed_data_t *portParsedDataTable=NULL;
uint32 numPorts;
uint32 portEntrySize;
uint8 memoryData[200];
uint8 boardID;
VENDOR_MAD mad;
FSTATUS status = FSUCCESS;
uint32 asicVersion;
uint8 chipStep;
uint8 chipRev;
table_parsed_data_t *portPtrs=NULL;
uint32 portLinkWidthSupportedIndex;
uint32 portLinkSpeedSupportedIndex;
uint32 portFMEnabledIndex;
uint32 portLinkCRCModeIndex;
uint32 portvCUIndex;
uint32 portExternalLoopbackAllowedIndex;
char portLinkCRCModeValue[35];
char portLinkWidthSupportedText[20];
char portLinkSpeedSupportedText[20];
struct oib_port *oib_port_session = NULL;
// determine how we've been invoked
cmdName = strrchr(argv[0], '/'); // Find last '/' in path
if (cmdName != NULL) {
cmdName++; // Skip over last '/'
} else {
cmdName = argv[0];
}
// Initialize
// parse options and parameters
while (-1 != (c = getopt(argc, argv, opts))) {
switch (c) {
case 'D':
g_debugMode = 1;
oib_set_dbg(stderr);
break;
case 't':
errno = 0;
strncpy(parameter, optarg, sizeof(parameter)-1);
parameter[sizeof(parameter)-1] = 0;
if ((p = strchr(parameter, ',')) != NULL) {
*p = '\0';
}
if (FSUCCESS != StringToUint64(&destPortGuid, parameter, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid GUID: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
case 'l':
#if !LIST_FILE_SUPPORTED
fprintf(stderr, "Error: l option is not supported at this time\n");
exit(1);
#endif
break;
case 'v':
oib_set_dbg(stderr);
g_verbose = 1;
break;
case 'q':
g_quiet = 1;
break;
case 'h':
if (FSUCCESS != StringToUint8(&hfi, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid HFI Number: %s\n", cmdName, optarg);
usage(cmdName);
}
g_gotHfi = 1;
break;
case 'o':
if (FSUCCESS != StringToUint8(&port, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid Port Number: %s\n", cmdName, optarg);
usage(cmdName);
}
g_gotPort = 1;
break;
case 'Q':
if (FSUCCESS != StringToUint8(&g_queryNum, optarg, NULL, 0, TRUE)) {
fprintf(stderr, "%s: Error: Invalid Query Number: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
case 'i':
if (FSUCCESS != StringToInt8(&g_intParam, optarg, NULL, 0, TRUE)
|| g_intParam < 0) {
fprintf(stderr, "%s: Error: Invalid integer parameter: %s\n", cmdName, optarg);
usage(cmdName);
}
break;
default:
usage(cmdName);
break;
}
}
// user has requested display of help
if (argc == 1) {
usage(cmdName);
exit(0);
}
if (-1 == destPortGuid) {
fprintf(stderr, "%s: Error: Must specify a target GUID\n", cmdName);
exit(1);
}
if (g_queryNum == 0) {
fprintf(stderr, "%s: Error: must enter a query number\n", cmdName);
exit(1);
}
if ((g_queryNum == 8) && ((g_intParam > MAX_PS) || (g_intParam < MIN_PS))) {
fprintf(stderr, "%s: Error: Query number 8 - must use -i for valid Power Supply number %d - %d\n", cmdName, MIN_PS, MAX_PS);
usage(cmdName);
}
if (g_quiet && (g_debugMode || g_verbose)) {
fprintf(stderr, "%s: Error: Can not specify both -q and -D|-v\n", cmdName);
exit(1);
}
// Get the path
status = oib_open_port_by_num(&oib_port_session, hfi, port);
if (status != 0) {
fprintf(stderr, "%s: Error: Unable to open fabric interface.\n", cmdName);
exit(1);
}
if (getDestPath(oib_port_session, destPortGuid, cmdName, &path) != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to get destination path\n", cmdName);
goto err_exit;
}
// Send a ClassPortInfo to see if the switch is responding
status = sendClassPortInfoMad(oib_port_session, &path, &mad);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to send/rcv ClassPortInfo\n", cmdName);
goto err_exit;
}
// Get a session ID
sessionID = getSessionID(oib_port_session, &path);
if (sessionID == (uint16)-1) {
fprintf(stderr, "%s: Error: Failed to obtain sessionID\n", cmdName);
status = FERROR;
goto err_exit;
}
// Send the test mad
switch (g_queryNum) {
case 1:
fprintf(stderr, "Error: Module type query no longer supported.\n");
status = FERROR;
break;
case 2:
status = sendRegisterAccessMad(oib_port_session, &path, &mad, sessionID,
(uint8)0x6f, ®Value, 1);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to access register - status %d\n", status);
break;
}
printf("Switch has booted from %s firmware image\n", (regValue & EEPROM_MASK) ? "failsafe" : "primary");
break;
case 3:
status = getFwVersion(oib_port_session, &path, &mad, sessionID, fwVersion);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to acquire fw version - status %d\n", status);
break;
}
printf("FW Version is %s\n", fwVersion);
break;
case 4:
status = getVPDInfo(oib_port_session, &path, &mad, sessionID, OPASW_MODULE, &vpdInfo);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to access vpd info - status %d\n", status);
break;
}
snprintf(mfgID, sizeof(mfgID), "%02x%02x%02x", vpdInfo.mfgID[0] & 0xff, vpdInfo.mfgID[1] & 0xff, vpdInfo.mfgID[2] & 0xff);
snprintf(mfgDate, sizeof(mfgDate), "%d-%02d-%d", vpdInfo.mfgMonth, vpdInfo.mfgDay, vpdInfo.mfgYear + 2000);
snprintf(mfgTime, sizeof(mfgTime), "%02d:%02d", vpdInfo.mfgHours, vpdInfo.mfgMins);
printf("VPD \"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\",\"%s\"\n",
vpdInfo.serialNum,
vpdInfo.partNum,
vpdInfo.model,
vpdInfo.version,
vpdInfo.mfgName,
vpdInfo.productName,
mfgID,
mfgDate,
mfgTime);
break;
case 5:
status = getNodeDescription(oib_port_session, &path, sessionID, nodeDesc);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to acquire node description - status %d\n", status);
break;
}
printf("Node description is %s\n", nodeDesc);
break;
case 6:
status = getTempReadings(oib_port_session, &path, &mad, sessionID, tempStrs);
for (i=0; i<I2C_OPASW_TEMP_SENSOR_COUNT; i++) {
printf("SENSOR %d: %s ", i, tempStrs[i]);
}
printf("\n");
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get one or more temperature readings - status %s\n",
iba_fstatus_msg(status & 0xFF));
}
break;
case 7:
for (i = 0; i < OPASW_PSOC_FAN_CTRL_TACHS; i++) {
status = getFanSpeed(oib_port_session, &path, &mad, sessionID,
(uint32)i, &fanSpeed[i]);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get fan speed for fan %d - status %d\n", i, status);
break;
}
if (g_verbose) {
printf("Fan speed is %d\n", fanSpeed[i]);
}
// TODO: stl1baseboard.c only reports the speed itself, not FAST/SLOW/NORMAL, so I can't confirm that this matches
if (fanSpeed[i] > MAX_FAN_SPEED)
printf("FAN %d:FAST ", i);
else if (fanSpeed[i] < MIN_FAN_SPEED)
printf("FAN %d:SLOW ", i);
else
printf("FAN %d:NORMAL ", i);
}
printf("\n");
break;
case 8:
status = getPowerSupplyStatus(oib_port_session, &path, &mad, sessionID, g_intParam,
&psStatus);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get power supply status for ps %d - status %d\n", g_intParam, status);
break;
}
switch (psStatus) {
case PS_ONLINE:
printf("PS %d: ONLINE\n", g_intParam);
break;
case PS_OFFLINE:
printf("PS %d: OFFLINE\n", g_intParam);
break;
case PS_NOT_PRESENT:
printf("PS %d: NOT PRESENT\n", g_intParam);
break;
case PS_INVALID:
printf("PS %d: INVALID\n", g_intParam);
break;
default:
fprintf(stderr, "Error: Failed to get power supply status for ps %d\n", g_intParam);
break;
}
break;
case 9:
status = getAsicVersion(oib_port_session, &path, &mad, sessionID, &asicVersion);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get ASIC version - status %d\n", status);
break;
}
chipStep = (asicVersion & ASIC_CHIP_STEP_MASK) >> ASIC_CHIP_STEP_SHFT;
chipRev = (asicVersion & ASIC_CHIP_REV_MASK) >> ASIC_CHIP_REV_SHFT;
printf("ASIC Version: V");
if (chipRev == 0) {
switch (chipStep) {
case ASIC_CHIP_STEP_A:
printf("1\n");
break;
case ASIC_CHIP_STEP_B:
printf("2\n");
break;
case ASIC_CHIP_STEP_C:
printf("3\n");
break;
default:
printf("0\n");
break;
}
} else {
printf("0\n");
}
break;
case 10:
printf("Session ID: %d\n", sessionID);
break;
case 11:
{
/* query port 2 */
int dest_port_query=1;
printf("Switch configuration values\n");
status = sendIniDescriptorGetMad(oib_port_session, &path, &mad, sessionID, &tableDescriptors);
if (status != FSUCCESS) {
fprintf(stderr, "%s: Error: Failed to get ini descriptors - status %d\n", cmdName, status);
goto retErr;
}
numPorts = getNumPorts(oib_port_session, &path, sessionID);
if( numPorts <= 0){
fprintf(stderr,"error in fetching port records\n");
goto retErr;
}
portEntrySize = tableDescriptors.portDataLen / numPorts;
status = sendMemAccessGetMad(oib_port_session, &path, &mad, sessionID, tableDescriptors.portDataAddr + (dest_port_query * portEntrySize), portEntrySize*4, memoryData);
if (status != FSUCCESS) {
printf("Mem Access MAD Failed \n");
goto retErr;
}
if (g_verbose) {
printf("MemoryData dump:\n");
opaswDisplayBuffer((char *)memoryData, portEntrySize * 4);
}
portParsedDataTable = malloc(tableDescriptors.portMetaDataLen * sizeof(table_parsed_data_t));
if(portParsedDataTable == NULL)
{
fprintf(stderr,"Not enough memory \n");
goto retErr;
}
status = parseDataTable(&portMetaData[0], memoryData, portMetaDataSize, portParsedDataTable, 0);
if(status != FSUCCESS) {
fprintf(stderr," failed: parseDataTable \n");
goto retErr;
}
portPtrs = portParsedDataTable;
portLinkWidthSupportedIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "LINK_WIDTH_SUPPORTED");
portLinkSpeedSupportedIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "LINK_SPEED_SUPPORTED");
portFMEnabledIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "FM_ENABLED");
portLinkCRCModeIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "LTP_CRC_MODE_SUPPORTED");
portvCUIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "VCU");
portExternalLoopbackAllowedIndex = getMetaDataIndexByField(&portMetaData[0], tableDescriptors.portMetaDataLen, "EXTERNAL_LOOPBACK_ALLOWED");
status = getNodeDescription(oib_port_session, &path, sessionID, nodeDesc);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to acquire node description - status %d\n", status);
goto retErr;
}
#define PRINT_REC(str,fmt,arg...) printf(" %-*s : "fmt,35,str,arg);
StlLinkWidthToText(portPtrs[portLinkWidthSupportedIndex].val.intVal, portLinkWidthSupportedText, 20);
StlLinkSpeedToText(portPtrs[portLinkSpeedSupportedIndex].val.intVal, portLinkSpeedSupportedText, 20);
PRINT_REC("Link Width"," %s\n", portLinkWidthSupportedText);
PRINT_REC("Link Speed"," %s\n", portLinkSpeedSupportedText);
PRINT_REC("FM Enabled"," %s\n", portPtrs[portFMEnabledIndex].val.intVal ? "Yes" : "No");
PRINT_REC("Link CRC Mode"," %s\n", StlPortLtpCrcModeVMAToText(portPtrs[portLinkCRCModeIndex].val.intVal,portLinkCRCModeValue,sizeof(portLinkCRCModeValue)));
PRINT_REC("vCU"," %d\n", portPtrs[portvCUIndex].val.intVal);
PRINT_REC("External Loopback Allowed"," %s\n", portPtrs[portExternalLoopbackAllowedIndex].val.intVal ? "Yes" : "No");
PRINT_REC("Node Description"," %s\n", strlen((const char *)nodeDesc)==0?(const char *)"no description":(char *)nodeDesc);
retErr:
if(portParsedDataTable)
free(portParsedDataTable);
break;
}
case 12:
status = getBoardID(oib_port_session, &path, &mad, sessionID, &boardID);
if (status != FSUCCESS) {
fprintf(stderr, "Error: Failed to get board id - status %d\n", status);
break;
}
printf("BoardID: 0x%02x\n", boardID);
break;
default:
fprintf(stderr, "Error: Invalid query number %d\n", g_queryNum);
releaseSession(oib_port_session, &path, sessionID);
usage(cmdName);
break;
}
releaseSession(oib_port_session, &path, sessionID);
printf("opaswquery completed\n");
err_exit:
if (oib_port_session != NULL) {
oib_close_port(oib_port_session);
}
if (status == FSUCCESS)
exit(0);
else
exit(1);
}
