C++ (Cpp) getLed Examples

Example #1

File: MidiController.cpp Project: kozakahi/OwlWare

void MidiController::sendSettings(){
  sendCc(PATCH_PARAMETER_A, (uint8_t)(patches.getCurrentPatchProcessor()->getParameterValue(PARAMETER_A)*127.0) & 0x7f);
  sendCc(PATCH_PARAMETER_B, (uint8_t)(patches.getCurrentPatchProcessor()->getParameterValue(PARAMETER_B)*127.0) & 0x7f);
  sendCc(PATCH_PARAMETER_C, (uint8_t)(patches.getCurrentPatchProcessor()->getParameterValue(PARAMETER_C)*127.0) & 0x7f);
  sendCc(PATCH_PARAMETER_D, (uint8_t)(patches.getCurrentPatchProcessor()->getParameterValue(PARAMETER_D)*127.0) & 0x7f);
  sendCc(PATCH_PARAMETER_E, (uint8_t)(patches.getCurrentPatchProcessor()->getParameterValue(PARAMETER_E)*127.0) & 0x7f);
  sendCc(PATCH_BUTTON, isPushButtonPressed() ? 127 : 0);
  sendCc(LED, getLed() == NONE ? 0 : getLed() == GREEN ? 42 : 84);
  sendCc(PATCH_MODE, settings.patch_mode << 5);
  sendCc(PATCH_SLOT_GREEN, settings.patch_green);
  sendCc(PATCH_SLOT_RED, settings.patch_red);
  sendCc(ACTIVE_SLOT, patches.getActiveSlot() == GREEN ? 0 : 127);
  sendCc(LEFT_INPUT_GAIN, codec.getInputGainLeft()<<2);
  sendCc(RIGHT_INPUT_GAIN, codec.getInputGainRight()<<2);
  sendCc(LEFT_OUTPUT_GAIN, codec.getOutputGainLeft());
  sendCc(RIGHT_OUTPUT_GAIN, codec.getOutputGainRight());
  sendCc(LEFT_INPUT_MUTE, codec.getInputMuteLeft() ? 127 : 0);
  sendCc(RIGHT_INPUT_MUTE, codec.getInputMuteRight() ? 127 : 0);
  sendCc(LEFT_OUTPUT_MUTE, codec.getOutputMuteLeft() ? 127 : 0);
  sendCc(RIGHT_OUTPUT_MUTE, codec.getOutputMuteRight() ? 127 : 0);
  sendCc(BYPASS, codec.getBypass() ? 127 : 0);
  sendCc(SAMPLING_RATE, (codec.getSamplingRate() >> 10) + 20);
  sendCc(SAMPLING_BITS, (codec.getFormat() << 4) + 20);
  sendCc(CODEC_MASTER, codec.isMaster() ? 127 : 0);
  sendCc(CODEC_PROTOCOL, codec.getProtocol() == I2S_PROTOCOL_PHILIPS ? 0 : 127);
  sendCc(SAMPLING_SIZE, settings.audio_blocksize>>4);
  sendCc(LEFT_RIGHT_SWAP, codec.getSwapLeftRight());
}

Example #2

File: PetduinoSerial.cpp Project: circuitbeard/petduino-serial

// Toggle the Petduino LED
void PetduinoSerial::toggleLed() {

  // Toggle the led
  Petduino::toggleLed();

  // Send event
  cmdMessenger.sendCmd(LED_EVENT, getLed());

}

Example #3

File: bigbuttons.cpp Project: Zazcallabah/blink1

QJsonObject BigButtons::toJson()
{
    QJsonObject obj;
    obj.insert("name", name);
    obj.insert("col",col.name());
    obj.insert("patternName",patternName);
    obj.insert("led",getLed());
    return obj;
}

Example #4

File: PetduinoSerial.cpp Project: circuitbeard/petduino-serial

// Set the value of the Petduino LED
void PetduinoSerial::setLed(bool value) {

  // Set the led
  Petduino::setLed(value);

  // Send event
  cmdMessenger.sendCmd(LED_EVENT, getLed());

}

Example #5

File: LedMatrixMAX7219Driver.cpp Project: dalmirdasilva/ArduinoLedMatrixDriver

void LedMatrixMAX7219Driver::shiftLed(unsigned char col, unsigned char row,
        unsigned char direction) {
    unsigned char led;
    if (!isOutOfBounds(col, row)) {
        led = getLed(col, row);
        setLed(col, row, (led ? LedMatrixDriver::OFF : LedMatrixDriver::ON));
        if (direction == LEFT) {
            col--;
        } else if (direction == RIGHT) {
            col++;
        } else if (direction == UP) {
            row++;
        } else {
            row--;
        }
        setLed((col % cols), (row % rows), (
                led ? LedMatrixDriver::ON : LedMatrixDriver::OFF));
    }
}

Example #6

File: Owl.cpp Project: giuliomoro/OwlWare

void updateLed(){
  setLed((LedPin)patches.getActiveSlot());
  midi.sendCc(LED, getLed() == GREEN ? 42 : 84);
}

Example #7

File: LedMatrixMAX7219Driver.cpp Project: dalmirdasilva/ArduinoLedMatrixDriver

void LedMatrixMAX7219Driver::switchLeds(unsigned char colFrom,
        unsigned char rowFrom, unsigned char colTo, unsigned char rowTo) {
    unsigned char led = getLed(colFrom, rowFrom);
    setLed(colFrom, rowFrom, getLed(colTo, rowTo));
    setLed(colTo, rowTo, led);
}

Example #8

File: PetduinoSerial.cpp Project: circuitbeard/petduino-serial

// Get led command handler
void PetduinoSerial::onGetLed()
{
  // Send status that describes the led state manually
  cmdMessenger.sendCmd(LED_EVENT, getLed());
}

Example #9

File: plugin.cpp Project: NhaTrang/scenecontrol

bool plugin::isLedValue ( const QString& channel, int lower, int upper )  {
    const int v = getLed ( channel );
    if ( v>upper ) return false;
    if ( v<lower ) return false;
    return true;
}