/**
* get_dlpar_nodes
*
* @param list_type
* @returns pointer to node list on success, NULL otherwise
*/
struct dr_node *
get_dlpar_nodes(uint32_t node_types)
{
struct dr_connector *drc_list = NULL;
struct dr_node *node_list = NULL;
struct dirent *de;
DIR *d;
char path[1024];
say(DEBUG, "Getting node types 0x%08x\n", node_types);
d = opendir(OFDT_BASE);
if (d == NULL) {
say(ERROR, "failed to open %s\n%s\n", OFDT_BASE,
strerror(errno));
return NULL;
}
while ((de = readdir(d)) != NULL) {
if ((de->d_type != DT_DIR) || is_dot_dir(de->d_name))
continue;
memset(path, 0, 1024);
sprintf(path, "%s/%s", OFDT_BASE, de->d_name);
if ((! strcmp(de->d_name, "vdevice"))
&& (node_types & VIO_NODES))
add_pci_vio_node(path, VIO_DEV, &node_list);
else if (! strncmp(de->d_name, "pci@", 4)) {
if (node_types & PCI_NODES)
add_pci_vio_node(path, PCI_DLPAR_DEV,
&node_list);
else if (node_types & PHB_NODES) {
if (drc_list == NULL)
drc_list = get_drc_info(OFDT_BASE);
add_phb_node(path, drc_list, &node_list);
}
} else if ((! strncmp(de->d_name, "lhea@", 5))
&& (node_types & HEA_NODES)) {
if (drc_list == NULL)
drc_list = get_drc_info(OFDT_BASE);
add_hea_node(path, drc_list, &node_list);
}
}
closedir(d);
if (node_list != NULL) {
add_linux_devices(NULL, node_list);
if (node_types & PHB_NODES)
update_phb_ic_info(node_list);
}
return node_list;
}
/**
* acquire_hp_children
*
* @param slot_of_path
* @param n_acquired
* @returns 0 on success, !0 otherwise
*/
int acquire_hp_children(char *slot_of_path, int *n_acquired)
{
struct dr_connector *drc_list, *drc;
int rc;
int failure = 0, count = 0;
drc_list = get_drc_info(slot_of_path);
if (drc_list == NULL) {
/* No hotplug-capable children */
return 0;
}
for (drc = drc_list; drc != NULL; drc = drc->next) {
if (is_hp_type(drc->type)) {
rc = acquire_hp_resource(drc, slot_of_path);
if (rc) {
say(ERROR, "failed to acquire %s\n", drc->name);
failure = 1;
}
count++;
}
}
*n_acquired = count;
return failure;
}
/**
* add_pci_vio_node
* @bried Add a PCI or virtual device node
*
* @param path ofdt path to this node
* @param dev_type type of device
* @param node_list pointer to list to add node to
* @returns 0 on success, !0 otherwise
*/
static int
add_pci_vio_node(const char *path, int dev_type, struct dr_node **node_list)
{
struct dr_connector *drc_list;
struct dr_connector *drc;
struct dr_node *node;
int child_dev_type = 0;
int rc = -1;
drc_list = get_drc_info(path);
if (drc_list == NULL)
return -1;
for (drc = drc_list; drc != NULL; drc = drc->next) {
switch (dev_type) {
case PCI_HP_DEV:
if (! is_hp_type(drc->type))
continue;
child_dev_type = dev_type;
break;
case PCI_DLPAR_DEV:
case VIO_DEV:
if (! is_logical_type(drc->type))
continue;
child_dev_type = dev_type;
break;
case PHB_DEV:
if (is_logical_type(drc->type))
child_dev_type = PCI_DLPAR_DEV;
else
child_dev_type = PCI_HP_DEV;
break;
}
node = alloc_dr_node(drc, child_dev_type, path);
if (node == NULL) {
say(ERROR, "Could not allocate pci/vio node\n");
return -1;
}
if (child_dev_type == PCI_HP_DEV)
node->is_owned = 1;
rc = init_node(node);
if (rc) {
free(node);
return rc;
}
node->next = *node_list;
*node_list = node;
}
return rc;
}
/**
* get_drc_by_name
* @brief Retrieve a dr_connector with the specified drc_name
*
* This routine searches the drc lists for a dr_connector with the
* specified name starting at the specified directory. If a dr_connector
* is found the root_dir that the dr_connector was found in is also
* filled out.
*
* @param drc_name name of the dr_connector to search for
* @param drc pointer to a drc to point to the found dr_connector
* @param root_dir pointer to buf to fill in with root directory
* @param start_dir, directory to start searching
* @returns 0 on success (drc and root_dir filled in), !0 on failure
*/
int
get_drc_by_name(char *drc_name, struct dr_connector *drc, char *root_dir,
char *start_dir)
{
struct dr_connector *drc_list = NULL;
struct dr_connector *drc_entry;
struct dirent *de;
DIR *d;
int rc = -1;
memset(drc, 0, sizeof(*drc));
/* Try to get the drc in this directory */
drc_list = get_drc_info(start_dir);
if (drc_list == NULL)
return -1;
drc_entry = search_drc_list(drc_list, NULL, DRC_NAME, drc_name);
if (drc_entry != NULL) {
memcpy(drc, drc_entry, sizeof(*drc));
sprintf(root_dir, "%s", start_dir);
return 0;
}
/* If we didn't find it here, check the subdirs */
d = opendir(start_dir);
if (d == NULL)
return -1;
while ((de = readdir(d)) != NULL) {
char dir_path[DR_PATH_MAX];
if ((de->d_type != DT_DIR) || is_dot_dir(de->d_name))
continue;
sprintf(dir_path, "%s/%s", start_dir, de->d_name);
rc = get_drc_by_name(drc_name, drc, root_dir, dir_path);
if (rc == 0)
break;
}
closedir(d);
return rc;
}
int
drslot_chrp_phb(struct options *opts)
{
int rc = -1;
if (! phb_dlpar_capable()) {
say(ERROR, "DLPAR PHB operations are not supported on"
"this kernel.");
return rc;
}
if (!opts->usr_drc_name) {
struct dr_connector *drc_list = get_drc_info(OFDT_BASE);
opts->usr_drc_name = drc_index_to_name(opts->usr_drc_index,
drc_list);
if (!opts->usr_drc_name) {
say(ERROR,
"Could not locate DRC name for DRC index: 0x%x",
opts->usr_drc_index);
return -1;
}
}
switch(opts->action) {
case ADD:
rc = add_phb(opts);
break;
case REMOVE:
rc = remove_phb(opts);
break;
case QUERY:
rc = query_phb(opts);
break;
}
return rc;
}
/**
* add_child_node
*
* Create information about the Open Firmware node and
* add that information to the appropriate per-node list of
* Open Firmware nodes. Also create the corresponding information
* for any PCI device.
*
* NOTES:
* 1) does not need to be concerned about one or more Open
* Firmware nodes having the used-by-rtas property present.
* One of the RTAS services used during removing a PCI adapter
* must take the appropriate action (most likely eliminate RTAS
* usage) in this case.
* 2) Open Firmware node RPA physical location code:
*
* [Un.m-]Pn[-Pm]-In[[/Zn]-An]
*
* where
* Un.m is for the enclosure for multi-enclosue systems
* Pn is for the planar
* In is for the slot
* /Zn is for the connector on the adapter card
* An is for the device connected to the adapter
*
* note
* There may be multiple levels of planars [Pm].
*
* RECOVERY OPERATION:
* 1) This function does not add the Open Firmware node if the user
* mode process has exceeded all available malloc space. This
* should not happen based on the rather small total amount of
* memory allocation required. The node is marked as skip.
* 2) This function does not add the device information if there
* is a problem initializing device. The node is marked as skip.
*
* @param parent
* @param child_path
*/
static void
add_child_node(struct dr_node *parent, char *child_path)
{
struct dr_connector *drc_list, *drc;
char loc_code[DR_BUF_SZ];
char *slash;
struct dr_node *child;
uint my_drc_index;
int rc;
assert(parent != NULL);
assert(strlen(child_path) != 0);
/* Make sure that the Open Firmware node is not added twice
* in case the ibm,my-drc-index property is put in all nodes
* for the adapter instead of just the ones at the connector.
*/
if (parent->children != NULL) {
struct dr_node *tmp;
for (tmp = parent->children; tmp; tmp = tmp->next) {
if (! strcmp(tmp->ofdt_path, child_path))
return;
}
}
/* Create the Open Firmware node's information and insert that
* information into the node's list based on the node's RPA
* physical location code. Ignore the OF node if the node
* does not have an RPA physical location code because that is
* a firmware error.
*/
rc = get_property(child_path, "ibm,loc-code", &loc_code, DR_BUF_SZ);
if (rc)
return;
/* Skip the Open Firmware node if it is a device node. Determine that
* the node is for a device by looking for a hyphen after the last
* slash (...-In/Z1-An).
*/
slash = strrchr(loc_code, '/');
if (slash != NULL) {
char *hyphen;
hyphen = strchr(slash, '-');
if (hyphen != NULL)
return;
*slash = '\0';
}
if (parent->dev_type == PCI_HP_DEV) { /* hotplug */
/* Squadrons don't have "/" in devices' (scsi,
* ethernet, tokenring ...) loc-code strings.
*
* Skip the Open Firmware node if the node's RPA
* physical location code does not match the node's
* location code. Ignore the connector information,
* i.e. information after last slash if no hyphen
* follows.
*/
if ((strcmp(parent->drc_name, loc_code) != 0)
&& (slash != NULL)) {
parent->skip = 1;
return;
}
}
/* Restore the slash because the full RPA location code
* is saved for each OF node so that the connector
* information can be used to sort the OF node list for
* each node.
*/
if (slash != NULL)
*slash = '/';
if (get_my_drc_index(child_path, &my_drc_index))
return;
/* need the drc-info in the dir above */
slash = strrchr(child_path, '/');
*slash = '\0';
drc_list = get_drc_info(child_path);
*slash = '/';
for (drc = drc_list; drc != NULL; drc = drc->next) {
if (drc->index == my_drc_index)
break;
}
/* Allocate space for the Open Firmware node information. */
child = alloc_dr_node(drc, parent->dev_type, child_path);
if (child == NULL) {
parent->skip = 1;
return;
}
if ((! strcmp(parent->drc_type, "SLOT"))
&& (parent->dev_type == PCI_DLPAR_DEV))
snprintf(child->ofdt_dname, DR_STR_MAX, "%s",
parent->ofdt_dname);
else
get_property(child_path, "name", child->ofdt_dname,
sizeof(child->ofdt_dname));
switch (parent->dev_type) {
case PCI_HP_DEV:
case PCI_DLPAR_DEV:
{
get_ofdt_uint_property(child_path, "vendor-id",
&child->pci_vendor_id);
get_ofdt_uint_property(child_path, "device-id",
&child->pci_device_id);
get_ofdt_uint_property(child_path, "class_code",
&child->pci_class_code);
break;
}
case HEA_DEV:
{
child->dev_type = HEA_PORT_DEV;
get_ofdt_uint_property(child_path, "ibm,hea-port-no",
&child->hea_port_no);
get_ofdt_uint_property(child_path, "ibm,hea-port-tenure",
&child->hea_port_tenure);
break;
}
}
child->next = parent->children;
parent->children = child;
}
/**
* init_cpu_info
* @brief Initialize cpu information
*
* @returns pointer to cpu_info on success, NULL otherwise
*/
static int
init_cpu_info(struct dr_info *dr_info)
{
struct dr_connector *drc_list, *drc;
struct dr_node *cpu, *cpu_list = NULL;
DIR *d;
struct dirent *de;
int rc = 0;
drc_list = get_drc_info(CPU_OFDT_BASE);
if (drc_list == NULL) {
say(ERROR, "Could not get drc information for %s\n",
CPU_OFDT_BASE);
return -1;
}
/* For cpu dlpar, we need a list of all possible cpus on the system */
for (drc = drc_list; drc; drc = drc->next) {
cpu = alloc_dr_node(drc, CPU_DEV, NULL);
if (cpu == NULL) {
say(ERROR, "Could not allocate CPU node structure: "
"%s\n", strerror(errno));
free_node(cpu_list);
return -1;
}
cpu->next = cpu_list;
cpu_list = cpu;
}
d = opendir(CPU_OFDT_BASE);
if (d == NULL) {
say(ERROR, "Could not open %s: %s\n", CPU_OFDT_BASE,
strerror(errno));
free_node(cpu_list);
return -1;
}
while ((de = readdir(d)) != NULL) {
char path[DR_PATH_MAX];
if ((de->d_type != DT_DIR) || is_dot_dir(de->d_name))
continue;
if (! strncmp(de->d_name, "PowerPC", 7)) {
uint32_t my_drc_index;
memset(path, 0, 1024);
sprintf(path, "%s/%s", CPU_OFDT_BASE, de->d_name);
rc = get_my_drc_index(path, &my_drc_index);
if (rc) {
say(ERROR, "Could not retrieve drc index for "
"%s\n", path);
break;
}
for (cpu = cpu_list; cpu; cpu = cpu->next) {
if (cpu->drc_index == my_drc_index)
break;
}
if (cpu == NULL) {
say(ERROR, "Could not find cpu with drc index "
"%x\n", my_drc_index);
rc = -1;
break;
}
rc = update_cpu_node(cpu, path, dr_info);
if (rc)
break;
say(DEBUG, "Found cpu %s\n", cpu->name);
}
}
closedir(d);
if (rc)
free_node(cpu_list);
else
dr_info->all_cpus = cpu_list;
return rc;
}
/**
* get_lmbs
* @brief Build a list of all possible lmbs for the system
*
* @param sort LMB_NORMAL_SORT or LMB_REVERSE_SORT to control sort order
*
* @return list of lmbs, NULL on failure
*/
struct lmb_list_head *
get_lmbs(unsigned int sort)
{
struct lmb_list_head *lmb_list = NULL;
struct dr_node *lmb = NULL;
struct stat sbuf;
char buf[DR_STR_MAX];
int rc = 0;
lmb_list = zalloc(sizeof(*lmb_list));
if (lmb_list == NULL) {
say(DEBUG, "Could not allocate LMB list head\n");
return NULL;
}
lmb_list->sort = sort;
rc = get_str_attribute("/sys/devices/system/memory",
"/block_size_bytes", &buf, DR_STR_MAX);
if (rc) {
say(DEBUG,
"Could not determine block size bytes for memory.\n");
free_lmbs(lmb_list);
return NULL;
}
block_sz_bytes = strtoul(buf, NULL, 16);
/* We also need to know which lmbs are already allocated to
* the system and their corresponding memory sections as defined
* by sysfs. Walk the device tree and update the appropriate
* lmb entries (and their memory sections) as we find their device
* tree entries.
*/
if (stat(DYNAMIC_RECONFIG_MEM, &sbuf)) {
struct dr_connector *drc_list, *drc;
drc_list = get_drc_info(OFDT_BASE);
if (drc_list == NULL) {
report_unknown_error(__FILE__, __LINE__);
rc = -1;
} else {
/* For memory dlpar, we need a list of all
* posiible memory nodes for the system, initalize
* those here.
*/
for (drc = drc_list; drc; drc = drc->next) {
if (strncmp(drc->name, "LMB", 3))
continue;
lmb = lmb_list_add(drc->index, lmb_list);
if (!lmb) {
say(ERROR, "Failed to add LMB (%x)\n",
drc->index);
rc = -1;
break;
}
lmb_list->lmbs_found++;
}
}
say(INFO, "Maximum of %d LMBs\n", lmb_list->lmbs_found);
rc = get_mem_node_lmbs(lmb_list);
} else {
/* A small hack to here to allow memory add to work in
* certain kernels. Due to a bug in the kernel (see comment
* in acquire_lmb()) we need to get lmb info from both places.
* For a good kernel, the get_mem_node_lmbs routine will not
* update the lmb_list.
*/
rc = get_dynamic_reconfig_lmbs(lmb_list);
if (! rc)
rc = get_mem_node_lmbs(lmb_list);
}
if (rc) {
free_lmbs(lmb_list);
lmb_list = NULL;
} else if (sort == LMB_RANDOM_SORT) {
shuffle_lmbs(lmb_list);
}
return lmb_list;
}
