void intel_register_i2c_camera_device(struct sfi_device_table_entry *pentry,
struct devs_id *dev)
{
struct i2c_board_info i2c_info;
struct i2c_board_info *idev = &i2c_info;
int bus = pentry->host_num;
void *pdata = NULL;
int n_subdev;
const struct intel_v4l2_subdev_id *vdev = get_v4l2_ids(&n_subdev);
struct intel_v4l2_subdev_i2c_board_info *info;
static struct intel_v4l2_subdev_table *subdev_table;
enum intel_v4l2_subdev_type type = 0;
enum atomisp_camera_port port;
static int i;
if (vdev == NULL) {
pr_info("ERROR: camera vdev list is NULL\n");
return;
}
memset(&i2c_info, 0, sizeof(i2c_info));
strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
i2c_info.addr = pentry->addr;
pr_info("camera pdata: I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
pentry->host_num, i2c_info.type, i2c_info.irq, i2c_info.addr);
if (!dev->get_platform_data)
return;
pdata = dev->get_platform_data(&i2c_info);
i2c_info.platform_data = pdata;
while (vdev->name[0]) {
if (!strncmp(vdev->name, idev->type, 16)) {
/* compare name */
type = vdev->type;
port = vdev->port;
break;
}
vdev++;
}
if (!type) /* not found */
return;
info = kzalloc(sizeof(struct intel_v4l2_subdev_i2c_board_info),
GFP_KERNEL);
if (!info) {
pr_err("MRST: fail to alloc mem for ignored i2c dev %s\n",
idev->type);
return;
}
info->i2c_adapter_id = bus;
/* set platform data */
memcpy(&info->board_info, idev, sizeof(*idev));
if (atomisp_platform_data == NULL) {
subdev_table = kzalloc(sizeof(struct intel_v4l2_subdev_table)
* n_subdev, GFP_KERNEL);
if (!subdev_table) {
pr_err("MRST: fail to alloc mem for v4l2_subdev_table %s\n",
idev->type);
kfree(info);
return;
}
atomisp_platform_data = kzalloc(
sizeof(struct atomisp_platform_data), GFP_KERNEL);
if (!atomisp_platform_data) {
pr_err("%s: fail to alloc mem for atomisp_platform_data %s\n",
__func__, idev->type);
kfree(info);
kfree(subdev_table);
return;
}
i = 0;
atomisp_platform_data->subdevs = subdev_table;
}
memcpy(&subdev_table[i].v4l2_subdev, info, sizeof(*info));
subdev_table[i].type = type;
subdev_table[i].port = port;
i++;
kfree(info);
return;
}
void intel_register_i2c_camera_device(struct sfi_device_table_entry *pentry,
struct devs_id *dev)
{
struct i2c_board_info i2c_info;
struct i2c_board_info *idev = &i2c_info;
int bus = pentry->host_num;
void *pdata = NULL;
int n_subdev;
const struct intel_v4l2_subdev_id *vdev = get_v4l2_ids(&n_subdev);
struct intel_v4l2_subdev_i2c_board_info *info;
static struct intel_v4l2_subdev_table *subdev_table;
enum intel_v4l2_subdev_type type = 0;
enum atomisp_camera_port port;
static int i;
if (vdev == NULL) {
pr_info("ERROR: camera vdev list is NULL\n");
return;
}
memset(&i2c_info, 0, sizeof(i2c_info));
//ASUS_BSP+++
if (PROJECT_ID == 0xFF) {
PROJECT_ID = Read_PROJ_ID();
}
pr_info("%s(%d):Project ID = %d\n",
__func__, __LINE__, PROJECT_ID);
#if 0
switch (PROJECT_ID) {
case PROJ_ID_Z580C:
if (!strncmp(pentry->name, "t4k35", 16)) {
strncpy(pentry->name, "hm2051", SFI_NAME_LEN);
pentry->addr = 0x24;
pr_info("%s: Change sensor name\n", __func__);
}
break;
default:
break;
}
#endif
//ASUS_BSP---
strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
i2c_info.addr = pentry->addr;
pr_info("camera pdata: I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
pentry->host_num, i2c_info.type, i2c_info.irq, i2c_info.addr);
if (!dev->get_platform_data)
return;
pdata = dev->get_platform_data(&i2c_info);
i2c_info.platform_data = pdata;
while (vdev->name[0]) {
if (!strncmp(vdev->name, idev->type, 16)) {
/* compare name */
type = vdev->type;
port = vdev->port;
break;
}
vdev++;
}
if (!type) /* not found */
return;
info = kzalloc(sizeof(struct intel_v4l2_subdev_i2c_board_info),
GFP_KERNEL);
if (!info) {
pr_err("MRST: fail to alloc mem for ignored i2c dev %s\n",
idev->type);
return;
}
info->i2c_adapter_id = bus;
/* set platform data */
memcpy(&info->board_info, idev, sizeof(*idev));
if (atomisp_platform_data == NULL) {
subdev_table = kzalloc(sizeof(struct intel_v4l2_subdev_table)
* n_subdev, GFP_KERNEL);
if (!subdev_table) {
pr_err("MRST: fail to alloc mem for v4l2_subdev_table %s\n",
idev->type);
kfree(info);
return;
}
atomisp_platform_data = kzalloc(
sizeof(struct atomisp_platform_data), GFP_KERNEL);
if (!atomisp_platform_data) {
pr_err("%s: fail to alloc mem for atomisp_platform_data %s\n",
__func__, idev->type);
kfree(info);
kfree(subdev_table);
return;
}
i = 0;
atomisp_platform_data->subdevs = subdev_table;
}
memcpy(&subdev_table[i].v4l2_subdev, info, sizeof(*info));
//ASUS_BSP+++
if (PROJECT_ID == 0xFF) {
PROJECT_ID = Read_PROJ_ID();
}
pr_info("%s(%d):Project ID = %d\n",
__func__, __LINE__, PROJECT_ID);
if (HW_ID == 0xFF) {
HW_ID = Read_HW_ID();
}
pr_info("%s(%d):HW ID = %d\n",
__func__, __LINE__, HW_ID);
if (PCB_ID == 0xFF) {
PCB_ID = Read_PCB_ID();
pr_info("%s(%d):PCB ID = %x\n",
__func__, __LINE__, PCB_ID);
switch (PROJECT_ID) {
case PROJ_ID_FE380CG:
case PROJ_ID_FE380CXG:
project_id = PCB_ID & 0x7;
hardware_id = (PCB_ID & 0x38) >> 3;
offset_0 = (PCB_ID & 0x40) >> 6;
offset_1 = (PCB_ID & 0x180) >> 7;
offset_2 = (PCB_ID & 0x1E00) >> 9;
offset_3 = (PCB_ID & 0x6000) >> 13;
offset_4 = (PCB_ID & 0x8000) >> 15;
//offset_0: Panel ID, offset_1: TP_ID, offset_2: RF ID(last bit is SIM ID), offset_3: Main Camera ID, offset_4: Sub Camera ID
//PCB_ID = pentry->project_id | pentry->hardware_id << 3 | pentry->offset_0 << 6 | pentry->offset_1 << 7 | pentry->offset_2 << 9 | pentry->offset_3 << 13 | pentry->offset_4 << 15;
pr_info("%s: project id = %d, hardware id = %d, offset_0 = %d, offset_1 = %d, offset_2 = %d, offset_3 = %d, offset_4 = %d\n", __func__, project_id, hardware_id, offset_0, offset_1, offset_2, offset_3, offset_4);
break;
case PROJ_ID_Z580C:
project_id = PCB_ID & 0x7;
hardware_id = (PCB_ID & 0x38) >> 3;
offset_0 = (PCB_ID & 0x40) >> 6;
offset_1 = (PCB_ID & 0x80) >> 7;
offset_2 = (PCB_ID & 0x700) >> 8;
offset_3 = (PCB_ID & 0x1800) >> 11;
offset_4 = (PCB_ID & 0x2000) >> 13;
//offset_0: Panel ID, offset_1: Wifi ID, offset_2: RF ID, offset_3: Main Camera ID, offset_4: Sub Camera ID
//PCB_ID = pentry->project_id | pentry->hardware_id << 3 | pentry->offset_0 << 6 | pentry->offset_1 << 7 | pentry->offset_2 << 8 | pentry->offset_3 << 11 | pentry->offset_4 << 13;
pr_info("%s: project id = %d, hardware id = %d, offset_0 = %d, offset_1 = %d, offset_2 = %d, offset_3 = %d, offset_4 = %d\n", __func__, project_id, hardware_id, offset_0, offset_1, offset_2, offset_3, offset_4);
break;
default:
break;
}
}
